DISCONTINUED LASER DIODE NX8311UD nm FOR LONG HAUL 2.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA DESCRIPTION FEATURES

Transcription

1 DESCRIPTION nm FOR LONG HAUL.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA The NX8311UD is a nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode TOSA (transmitter optical subassembly) with InGaAs monitor PIN-PD in a receptacle type package designed for SFF/SFP transceiver with LC duplex receptacle. FEATURES Applications STM-16 (L-16.1), SONET OC-8 (LR) Internal optical isolator Optical output power =.0 mw Low threshold current lth = 10 ma TC = 5 C Wide operating temperature range TC = 0 to +85 C InGaAs monitor PIN-PD Small package (Total length 1.0 mm MAX.) LASER DIODE NX8311UD 5.0 mm Document No. PL10181EJ0V0DS (nd edition) Date Published July 003 CP (K) The mark shows major revised points. NEC Compound Semiconductor Devices 00,

2 PACKAGE DIMENSIONS (UNIT: mm) 1.0 MAX. 6.5± ± φ.75±0.1 φ3.±0.03 φ1.3 P.C.D φ3.8 φ ±0.05 (1.1) φ ±0.05 (.55) OPTICAL REFERENCE PLANE 0.55±0.05 BOTTOM VIEW 1 3 PIN CONNECTIONS PD 1 (CASE) Data Sheet PL10181EJ0V0DS 3 LD

3 ORDERING INFORMATION (Solder Contains Lead) Part Number Package Pin Connections NX8311UD ORDERING INFORMATION (Pb-Free) PD 1 3 LD Part Number Package Pin Connections NX8311UD-AZ* *NOTE: PD 1 3 LD Please refer to the last page of this data sheet, Compliance with EU Directives for PB-Free RoHS Compliance Information. ABSOLUTE MAXIMUM RATINGS Parameter Symbol Ratings Unit Optical Output Power from Fiber 5.0 mw Forward Current of LD IF 150 ma Reverse Voltage of LD VR.0 V Forward Current of PD IF.0 ma Reverse Voltage of PD VR 15 V Operating Case Temperature TC 0 to +85 C Storage Temperature Tstg 0 to +85 C Lead Soldering Temperature Tsld 350 (3 sec.) C Data Sheet PL10181EJ0V0DS 3

4 ELECTRO-OPTICAL CHARACTERISTICS (TC = 0 to +85 C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Operating Voltage Vop CW, =.0 mw V Threshold Current Ith CW, 50 ma CW, TC = 5 C 10 0 Optical Output Power from Fiber CW.0 mw Modulation Current Imod CW, =.0 mw 7 50 ma CW, =.0 mw, TC = 5 C Differential Efficiency ηd CW, =.0 mw W/A CW, =.0 mw, TC = 5 C Peak Emission Wavelength λp CW, =.0 mw, RMS ( 0 db) nm Side Mode Suppression Ratio SMSR CW, =.0 mw 30 db Rise Time tr Ib = Ith, 10-90% 00 ps Fall Time tf Ib = Ith, 90-10% 00 ps Monitor Current Im CW, VR = 1.5 V, = 1.0 mw µa Monitor Dark Current ID VR = 1.5 V 500 na VR = 1.5 V, TC = 5 C 50 Tracking Error *1 γ CW, Im = const. (@ =.0 mw) db Connector Repeatability With master pigtail db Optical Isolation Is CW, =.0 mw 0 db *1 Tracking Error: γ (mw).0 0 Im (ma) TC = 5 C TC = 0 to +85 C Im γ = 10 log Data Sheet PL10181EJ0V0DS.0 [db]

5 TYPICAL CHARACTERISTICS (TC = 5 C, unless otherwise specified) Optical Output Power from Fiber (mw) Forward Voltage VF (V) OPTICAL OUTPUT POWER FROM FIBER vs. FORWARD CURRENT TC = 0 C FORWARD VOLTAGE vs. FORWARD CURRENT TC = 0 C +5 C +85 C +5 C +85 C Forward Current IF (ma) TC = +85 C +5 C Forward Current IF (ma) 0 C Remark The graphs indicate nominal characteristics. Relative Intensity SPECTRUM Wavelength λ (nm) TC = 5 C Data Sheet PL10181EJ0V0DS 5

6 Bit Error Rate Bit Error Rate Bit Error Rate ERROR RATE CHARACTERISTICS TC = 0 C, Pavg = 0 dbm, EX = 10 db,.883 Gb/s, PRBS 3 1 back to back after 0 km Average Received Power P (dbm) ERROR RATE CHARACTERISTICS TC = 5 C, Pavg = 0 dbm, EX = 10 db,.883 Gb/s, PRBS 3 1 back to back after 0 km Average Received Power P (dbm) ERROR RATE CHARACTERISTICS TC = 85 C, Pavg = 0 dbm, EX = 10 db,.883 Gb/s, PRBS 3 1 back to back after 0 km Average Received Power P (dbm) Remark The graphs indicate nominal characteristics. Relative Intensity (0 mv/div.) Relative Intensity (0 mv/div.) Relative Intensity (0 mv/div.) Data Sheet PL10181EJ0V0DS EYE DIAGRAM Back to Back (100 ps/div.) EYE DIAGRAM Back to Back (100 ps/div.) EYE DIAGRAM Back to Back (100 ps/div.) 6

7 LD φ 3.8 mm FP-TOSA PACKAGES FAMILY FOR OPTICAL FIBER COMMUNICATIONS Part Number Absolute Maximum = 5 C TC ( C) Tstg ( C) Electro-Optical Characteristics Ith (ma) λc (nm) TYP. TYP. MIN. MAX. Application NX731UA-AZ* 0 to to Mb/s: STM-1 (S-1.1) 6 Mb/s: STM- (S-.1) Package NX7313UA-AZ* 0 to to Gb/s: GbE NX731UA-AZ* 0 to to Mb/s: STM-1 (L-1.1) NX7315UA-AZ* 0 to to Gb/s: STM-16 *NOTE: (I-16) Please refer to the last page of this data sheet, Compliance with EU Directives for PB-Free RoHS Compliance Information. LD φ 3.8 mm DFB-TOSA PACKAGES FAMILY FOR OPTICAL FIBER COMMUNICATIONS Part Number Absolute Maximum = 5 C TC ( C) Tstg ( C) Electro-Optical Characteristics Ith (ma) λp (nm) TYP. TYP. MIN. MAX. Application NX8310UA-AZ* 0 to to Mb/s: STM- (L-.1) NX8311UD-AZ* 0 to to Gb/s: STM-16 (L-16.1) NX831UA-AZ* 0 to to Gb/s: STM-16 (S-16.1) NX831UD-AZ* 0 to to Gb/s: STM-16 *NOTE: (S-16.1) Package Please refer to the last page of this data sheet, Compliance with EU Directives for PB-Free RoHS Compliance Information. Data Sheet PL10181EJ0V0DS 7

8 REFERENCE Document Name OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE Opto-Electronics Devices Pamphlet Data Sheet PL10181EJ0V0DS Document No. PX10161E PX10160E 8

9 Subject: Compliance with EU Directives 590 Patrick Henry Drive Santa Clara, CA Telephone: (08) Facsimile: (08) CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 00/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM Concentration contained in CEL devices -A -AZ Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.