Texas Instruments Sensing Portfolio 1Q18

Size: px
Start display at page:

Download "Texas Instruments Sensing Portfolio 1Q18"

Transcription

1 Texas Instruments Sensing Portfolio 1Q18 1

2 TI 传感器产品 系统监控和保护 温度 电流 / 功率 磁 湿度 位置传感器 角度 压力 / 高度 距离 流量 速度 光和成像 光 医学成像 近红外 Time-of-Flight System Monitoring /Protection Position Sensing Imaging and Light 2

3 系统监控和保护产品 温度, 电流, 磁性, 和湿度 3

4 TI 温度传感器产品 Temperature Local digital temperature sensors Highest accuracy (0.1 C) World s smallest temp sensor (TMP103) Auto qualified (many options) Industry standard (TMP75) Device Accuracy C Size (mm) AEC-Q100 Status 1k Price TMP x 1.6 Yes Production $0.50 TMP x 3.0 Yes Production $0.45 TMP x 1.6 Yes Production $0.90 TMP / x 2.0 No Production $1.45 Local analog temperature sensors Broad portfolio - over 100 devices Positive/negative output slope Auto qualified (many options) High accuracy Device Accuracy C Size (mm) AEC-Q100 Status 1K Price LM x 1.3 Y Production $0.32 LM x 1.25 Y Production $0.32 LMT x 2.0 Y Production $0.17 TMP / x 1.6 Y Sampling $0.15 Remotes (multi-channel) and switches Programmable trip points (switch) Replaces thermistor + comparator implementations Remotes support up to 8 channels Automotive qualified Device Type Trip Points Channels AEC-Q100 1K Price TMP708 Switch 1 N/A Y $0.30 TMP303 Switch 2 N/A Y $0.40 TMP451 Remote N/A 1 Y $0.52 TMP468 Remote N/A 8 Y $0.95 4

5 TI 电流传感器解决方案 Current/Power Isolated Options Directly measures the current through a relatively small ohmic valued (shunt) resistor. Non-Isolated Options 50V ISOxxx AMCxxx INAxxx TLVxxx MSPxxx DRV4xx Magnetic sensing indirectly measures the load current by measuring the magnetic field produced by a current running through a conductor. MCU 50A Non-invasive & Isolated 5

6 非隔离电压和电流测量放大器模拟输出 Current/Power Current Shunt Amplifiers Discrete Op Amps Instrumentation Amps Integrated zero-drift precision-matched resistors Industry s best combination of low power, high accuracy, small size & compelling cost Common mode independent of device supply Broad offering with over 30 families of devices, majority of families AEC-Q100 qualified Widest selection of op amps that meet precision, bandwidth, flexible gain configurations, or cost needs. Wide-ranging accurate measurement with common-mode input ranges which include the ground or swing beyond the rails as well as rail-to-rail output swing High DC precision by way of low input offset voltage and bias current allows for smallervalued shunt resistors and higher accuracy at low currents Single-resistor adjustable gain ranges up to 10,000 V/V allow for system flexibility Device Common Mode Input offset Gain Error (%) Status 1K Price INA240-4 to 80V 25µV 0.2% Production $0.99 INA to 36V 35µV 0.5% Production $0.50 INA to 36V 150µV 1.0% Production $0.25 INA to 26V 500µV 1.0% Production $0.15 Device Input offset Drift GBW Rail-to-Rail 1K Price OPA191 25µV 0.1µV/ C 2.5MHz In / Out $0.99 OPA180 75µV 0.1µV/ C 2MHz Out $0.69 OPA388 5µV 0.005µV/ C 10MHz In / Out $0.98 TLV333 15µV 0.02µV/ C 350kHz In / Out $0.49 Device CMRR Input Offset Input Bias Max Gain 1K Price INA828-Preview 140 db 50 µv 0.6 na 10,000 V/V $2.00 INA db 55 µv 2.5 na 1,000 V/V $1.85 INA db 150 µv 65 na 1,000 V/V $1.10 INA db 25 µv 0.2 na 1,000 V/V $1.80 Difference Amps Featuring precision-matched, integrated resistor networks for high accuracy current measurements Natively supports very large common-mode voltages (e.g., INA149, up to ±275V) for maximum dynamic range Device Vcm (Max) Input Offset CMRR Gain Error 1K Price INA V 1100 µv 90 db 0.02% $2.70 INA105 20V 250 µv 86 db 0.01% $3.36 INA V 500 µv 86 db 0.05% $1.25 INA V 5000 µv 70 db 0.076% $2.45

7 非隔离电压和电流测量特定的放大器和 ADC Current/Power Integrated Comparator w/csa Current Sense Amplifiers with integrated comparator function to alert when load current exceeds threshold Several performance tiers of devices with either simple alert, single comparator, dual comparator or windows comparator options Device Comparators Common mode Response Gain Error (%) 1K Price Time (µs) INA303 Windows 0 to 36V 1 0.1% $1.05 INA301 Single 0 to 36V 1 0.1% $1.05 INA381-Preview Single 0 to 26V 5 1.0% $0.25 INA203 Dual -16 to 80V % $1.05 Current/Power/Energy Monitor w/ Digital Interface Highest accuracy Current/Power/Energy monitors in the industry Integrated power accumulation on select devices Wide range of small board space package options Device Architecture Common mode Input Gain Error (%) 1K Price offset(µv) INA233 I2C/PMBus 0 to 36V % $1.45 INA ch -I2C 0 to 26V % $0.80 LM5056 I2C/PMBus 10 to 80V % $1.05 INA219 I2C 0 to 26V % $0.80 Current Sense w/ Integrated Shunt 1st in market to Integrate precision 2mΩ shunt resistor with Current Sense Amp Integrated precision shunt enables high accuracy over wide temperature range Device Common mode Integrated Shunt Input offset Gain Error (%) 1K Price INA253-Preview -4 to 80V 2mΩ 12.5mA 0.3% $1.99 INA260 0 to 36V 5mA 5mA 0.15% $1.89 INA250 0 to 36V 50mA 50mA 0.2% $1.40 7

8 Integrated TIA 非隔离电压和电流测量 MSP430 MCU 内部集成 Industry s best combination of low power, low-leakage Trans impedance Amplifier and integrated MCU Rail-to-Rail output, Programmable settling time and power modes Current/Power Device Input Bias current Memory Package Status 1K Price MSP430FR pA 2 KB 16,20pin Production $ 0.55 MSP430FR pA 4 KB TSSOP, 16 QFN Production $ 0.60 MSP430FR2355 5nA 32 KB 38-48pin TSSOP/QFN Samples Q3 17 $ 2.50 Enhanced Comparator Selectable analog low-pass o/p filter Interrupt capability Integrated 6-bit DAC for reference input Interrupt driven measurement system for low power operation Configurable high power, low power modes Device Quiescent Current Memory Package Status 1K Price MSP430FR uA 2 KB Production $ 0.45 MSP430FR uA 4 KB 16, 20 pin Production $ 0.49 TSSOP, MSP430FR uA 2 KB 16pin QFN Production $ 0.55 MSP430FR uA 4 KB Production $ 0.60 Integrated PGA + 24bit Sigma Delta Converter Accuracy <0.1% over 200:1 Dynamic Range for Phase Current Support for multiple sensors: CTs, Rogowski coils and Shunt Resistors Upto 7 independent 24-bit Sigma Delta ADCs with Differential inputs and Variable Gain Device SD24 Memory Packages Status 1K Price MSP430i2041 4ch. 32KB 28,32 pin Production $ 1.20 MSP430F6736 3ch. 128KB 80,100pin Production $ 3.30 MSP430F6779 7ch. 512 KB pin Production $

9 隔离电压和电流测量放大器和 ADC Current/Power Isolated ADCs Reinforced Isolation with up to 12.8kV surge voltage ±50mV & ±250mV input range devices Superior DC Performance: Offset, Offset Drift, Gain and Gain Drift Performance Device Input Range Ext Clock AEC-Q100 Status 1K Price AMC1304 ±50/±250mV 5-20Mhz Yes Production $3.65 AMC1305 ±50/±250mV 5-20Mhz Yes Production $3.35 AMC1306 ±50/±250mV 5-21Mhz Planned Production $3.10 Isolated Amplifiers Reinforced Isolation with up to 10kV surge voltage ±250mV to ±10V input range devices Superior DC Performance: Offset, Offset Drift, Gain and Gain Drift Performance Device Input Range Isolation AEC-Q100 Status 1K Price AMC1100 ±250mV Basic No Production $2.00 AMC1200 ±250mV Basic Yes Production $2.20 AMC1301 ±250mV Reinforced Yes Production $2.90 AMC1311 2V Reinforced Planned Samples 3Q $2.90 Magnetic AFEs & Sensors (Hall Effect and Fluxgate) Range of solutions for closed-loop (aka w/coil) and open-loop (aka without coil) AC & DC current measurement Fluxgate magnetic sensors strengthen: <1% accuracy over wide temp range Device Amp range Architecture AEC-Q100 Status 1K Price DRV411 (Hall) 1A-100A Closed-Loop No Production $1.20 DRV421 (Flux) 1A-100A Closed-Loop No Production $2.50 DRV425 (Flux) 1A-1000A Open-Loop Planned Production $2.90 9

10 TI 湿度传感器解决方案 Humidity 防尘结构设计 (HDC2010) Dust HDC2010 Humidity / Moisture HDC20x0 PCB Polyimide placed on the bottom TI Advantages 1. Smallest size 2. Lowest power 3. Highest accuracy DFN WCSP Humidity Sensors Humidity Sensors HDC2010 sampling now Power consumption ((0.6μA) 2x-10x lower than competition P2P Compatible with SHT2x, SI702x Device Package Acc %RH, Temp Isupply Status 1K Price HDC1080 DFN (3x3) 2%, 0.4 C 1.3μA Production $1.20 HDC2010 WCSP (1.6x2) 2%, 0.4 C 0.6μA Production $0.99 HDC2080 DFN (3x3) 2%, 0.4 C 0.6μA Sampling $

11 位置传感器 角度, 压力, 高度, 距离测量, 流量, 速度 11

12 角度传感器 Angular position Revolutions Per Minute (RPM) < >20000 HALL EFFECT 0.01 Optical Encoder Angle Resolution 1 Hall Effect Resolver Contactless Inductive Magneto Resistive Absolute position in BLUE Absolute and Incremental Position in RED Angular position or Rotary Position sensors translate angular mechanical position to an electrical signal for feedback purposes across a wide range of applications Applications requiring angular position information include many type of motors, as well as many automotive systems (pedal position, steering wheel position, throttle position, chassis position, valve position etc.) 12

13 高精度角度传感器解决方案 Angular position Resolver to digital converter AFE Integration of multiple discrete components into a single IC Functional safety diagnostics for system level ASIL-D certification (ISO26262 and ISO61508) Upto 140 ma exciter amplifier drive current Automotive AEC-Q100 grade1 qualified PGA411 Accuracy (in degrees) Temperature -40 to 125 C Interface Analog (I/O) Functional safety (ISO26262) Yes Status Production 1K Price (USD) $10.79 High speed SAR ADCs for optical encoders bit SAR ADC SPI, I2C and parallel outputs Simultaneous sampling ADS83xx Accuracy (in degrees) System dependent Temperature -40 to 125 C Interface SPI, I2C, Parallel Functional safety (ISO26262) No Status Production 1K Price (USD) $

14 >10,000 转角度传感器解决方案 Angular position Inductive (LDC) sensors High reliability, contactless, sine cosine encoder based on inductance change of PCB coils due to moving rotor Ideal for dirty, wet, and other challenging environments Operates effectively even with magnetic or electrical environmental interference LDC5072-Q1 Accuracy (in Degrees) ~ 0.1 Speed (in rpm) ~ 60,000 rpm Temperature -40 to 150 C Interface Sine/Cosine (analog) Functional safety (ISO26262) Yes Status Development 1K Price (USD) $ 1.10 Hall Effect sensors latches & linear DRV5013-Q1 is a family of high voltage robust Hall Effect latches (contactless magnetic sensor) with sampling bandwidth rate of 30kHz Low cost solution offering as magnets range is the $0.01 to $0.10 in high volume Both latch and linear (analog output or digital PWM output) Hall Effect offerings DRV5013-Q1 DRV5015-Q1 Magnet Multi-pole Multi-pole Accuracy (in degrees) ~1 ~1 Speed (rpm) 15-25K rpm 10K rpm Temperature -40 to 150 C -40 to 125C Voltage 2.7V to 38V 2.5V to 5.5V Status Production Sampling 1K Price $0.30 $

15 感测和高度传感器 Presence 感测传感器 : 当有目标靠近传感器时. 用于检测目标是否存在或避免碰撞 Open/closed sensing highlights when a system is intentionally opened or closed or unintentionally opened or closed, providing intrusion detection and tamper protection. Most popular technologies for presense sensing: Ultrasonic (PGA4xx, TDC1xxx) Optical (OPT3101) Capacitive (FDC2xxx) mmwave (IWR1xxx, AWR1xxx) Most popular technologies for open/closed sensing: Inductive (LDCxxx) Magnetic (DRV5xxx) Optical (OPT3002) 15

16 感测, 高度传感器 Presence Industry s best combination of low power, detection range and integration Small form factor with integration to meet the needs of automotive park assist and industrial field transmitters Ultrasonic technology works irrespective of the surface type (glass, plastic, concrete etc.) or contour (rough or smooth) PGA460-Q1 TDC1000-Q1 Detection range 25 cm 11 meters cm Temperature -40 to 125 C -40 to 125 C Interface UART, TCI SPI Status Production Production 1K Price (USD) $1.82 $2.93 Ultrasonic AEC Q-100 qualified Optical Gives direct depth output; measurement independent of object color and reflectivity Excellent high ambient rejection enables full sunlight operation Multiple in-built LED drivers with programmable current enables wide Field of View designs (one LED for each region) OPT3101 Detection Range 0.1m 10 s of m Temperature -40 to 85 C Interface I2C Status Sampling 1K Price (USD) $

17 距离 / 位移传感器 Distance Range um mm cm m >100 m mmwave Accuracy (%) IR Optical Ultrasonic Capacitive Hall Effect Inductive * Passive technologies in BLUE * most technology types A wide range of technologies are available depending on measuring range and resolution of measurement needed Different technologies are better at different characteristics and choice is made based on the end application requirements - cost, environmental conditions (wet, dirty, oil etc), and object reflectivity 17

18 高精度传感器测量 Distance LiDAR ADCs LiDAR system delivers high spatial accuracy & fast 3D spatial maps from cm to km range Typical system includes laser based TX and RX. RX architecture vary (GSPS ADCs, Multi-channel AFEs, TDC) Large portfolio of products to support all the above schemes ADC08D1020 ADS5294 RX Scheme GSPS ADC Multi-channel AFE Specs 2-ch, 8bit, 1.0GSPS (variants available) 8-ch, 14b, 80MSPS (variants available) Interface LVDS LVDS Temperature -40 to 85 C -40 to 85 C Status Production Production 1K Price (USD) $275 $75 mmwave High accuracy object sensing, providing range, velocity and angle of objects with cm level accuracy Rugged technology for sensing in challenging conditions such as rain, darkness, fog, dust Ability to see through plastic, wood, glass and other non-metalic objects Status Temperature Clutter removal algorithms allows focus 1K Price (USD) Status Active Active on objects of interest in field of view Automotive AEC-Q100 Qualified parts IWR1xxx AWR1xxx Range 4cm 250m 4cm 250m Resolution Interface 4cm resolution <mm accuracy SPI, CAN, CSI2 4cm resolution <mm accuracy SPI, CAN, CAN- FD, CSI2 1K Price (USD) $ $23.99 $85 - $99 18

19 探测米到厘米的水平运动 Distance Ultrasonic Integrated utrasonic signal processor and transducer driver for long distance measurements Low side drivers with configurable current limit Low noise amplifier with programmable time varying gain Automotive AEC-Q100 Qualified parts PGA460 Range 25 cm - 11 meters Resolution ~ 1 cm Interface TCI and UART Temperature -40 to 125 Status Production 1K Price (USD) $ 1.99 Optical Wide range of distance achievable with optics (several 10 s of meters) High sample rate (4ksps) helps with more averaging for better noise Operates on Time of Flight principle, thereby measurement independent of object color and reflectivity Compatible with wide variety of LED/Photodiodes Range Resolution Interface OPT m 10 s of m 1m (80% reflective target) I2C Temperature -40 to 85 C Status Sampling 1K Price (USD) $

20 探测米到厘米的移动距离 Distance Linear Hall Sensor Capacitive (FDC) Linear Hall Effect (Magnetic) Low cost, low power noise immune sensor design that can sense through non-conductors like glass/plastics. With FDC, customers have the ability to measure motion (gesture), presence and level AEC Q-100 qualified Hall effect can be configured in many ways depending on the physical placement of the magnet TI offers a over 20 different commercial and Automotive Grade 0 threshold level as well as range of voltage capable device which allows greater flexibility In high EMI noise environments the digital PWM interface of DRV5057 family of devices provide a more robust solution FDC2214-Q1 Range Upto 8 cm Resolution 0.1 Temperature -40 to 125 C Interface I2C Status Production 1K Price $3.50 DRV5055-Q1 DRV5057-Q1 Magnet Axial Axial Temperature -40 to 150C -40 to 150C Architecture Omnipolar Unipolar Interface Analog PWM Status Sampling Sampling 1K Price $0.35 $

21 探测微米的移动距离 Distance Inductive Sensing solution Low cost contactless technology that can detect minor movement of conductive target near coil LDC1101 LDC1612 LDC2114 Range ~1-3 mm ~1-3 mm ~1-3 mm Conductive target L p C par Robust against dirt, dust, oil and water Enables electronic touch Resolution 20 nm 20 nm 20 nm Interface SPI I2C Digital (Hi/Lo) Temperature -40 to to to 105 Status Production Production Production AEC Q-100 options available 1K Price (USD) $ 2.50 $2.40 $1.10 Inductive (LDC) Application: Electronic touch No cutouts or holes needed: modern appearance, simpler assembly, easier to waterproof. Overall lower cost of manufacturing Allows force detection for multi-level button functions Contactless technology extend life and reduces wear and tear Appliances Industrial gauges Personal electronics 21

22 成像 & 红外 生物医学, 近红外, ToF, 激光灯 22

23 TI 灯光传感器解决方案 Light Display brightness Conserve battery Daylight harvest Why measure light? Display backlight control for better visual experience Increase display life and extend battery life by optimizing display brightness (wearables) Harvest daylight based on ambient lighting TI Advantages 1. Smallest size 2. Lowest power 3. Highest accuracy Great human-eye response match Ultra low power (~1.8uA) Very small package suitable for area constrained applications Excellent IR rejection resulting in good performance behind dark glass Device Response Range Size (mm) Status 1K Price OPT3001 Human eye Klux 2 x 2 x 0.65 Production $0.99 OPT3001-Q1 Human eye Klux 2 x 2 x 0.65 Production $1.20 OPT nm - 2 x 2 x 0.65 Production $0.90 OPT3006 Human eye Klux 0.9 x 0.8 x 0.23 Production $

Texas Instruments Sensing Technologies

Texas Instruments Sensing Technologies Ambient Broad Spectrum IC Sensors AFEs Current & Power Texas Instruments Sensing Technologies Imaging & Light Current & Power System Protection & Monitoring Op Amp Current Shunt Amp Instrumentation Amp

More information

Current Sense Amplifiers\ Current Shunt Monitors ( in 15 Minutes) June 2015

Current Sense Amplifiers\ Current Shunt Monitors ( in 15 Minutes) June 2015 Current Sense Amplifiers\ Current Shunt Monitors ( in 15 Minutes) June 2015 TI is sensing the world Temperature Current / Power Proximity Light Temperature Sensors Passive Infrared Current Shunt Magnetic

More information

Linear Technology Chronicle

Linear Technology Chronicle Linear Technology Chronicle High Performance Analog Solutions from Linear Technology Vol. 13 No. 5 Industrial Process Control LT1790-2.5 LTC2054 REMOTE THERMOCOUPLE CH0 CH1 CH7 CH8 CH15 COM REF 16-CHANNEL

More information

Health and Fitness Analog solution. Wenbin Zhu Medical BDM June, 2015

Health and Fitness Analog solution. Wenbin Zhu Medical BDM June, 2015 Health and Fitness Analog solution Wenbin Zhu Medical BDM June, 2015 1 A Broad Market TI in Medical Devices Today TI HealthTech Engineering components for life. TI Solutions for Wearable Optical Bio-Sensing

More information

YP G-HSD Hall Current Sensor 确保测量准确精度高 安装方便 售价低. 执行标准 Standard 过载能力 Overload 精度 Accuracy 线性度 Linearity 失调电压 Voltage maladjustment

YP G-HSD Hall Current Sensor 确保测量准确精度高 安装方便 售价低. 执行标准 Standard 过载能力 Overload 精度 Accuracy 线性度 Linearity 失调电压 Voltage maladjustment YPG-HSD YP G-HSD Hall Current Sensor Model Description YPG - HSD - 外形代号 (Externality Code) - 额定电流 (Rated Current) HSD 外形代号 Externality Code 霍尔效应直检式传感器 Hall Effect Current Sensor & Transducer 1~7 ( 见外形图

More information

MCP6031/2/3/ µa, High Precision Op Amps. Features. Description. Applications. Design Aids. Package Types. Typical Application

MCP6031/2/3/ µa, High Precision Op Amps. Features. Description. Applications. Design Aids. Package Types. Typical Application 0.9 µa, High Precision Op Amps Features Rail-to-Rail Input and Output Low Offset Voltage: ±150 µv (maximum) Ultra Low Quiescent Current: 0.9 µa Wide Power Supply Voltage: 1.8V to 5.5V Gain Bandwidth Product:

More information

TM Technology for Innovators. Also Includes:

TM Technology for Innovators. Also Includes: TM Technology for Innovators Also Includes: Amplifiers Instrumentation/Differential Amplifiers INA118 Lowest-Power Instrumentation Amp I Q = 350µA, V OS = 50µV, I B = 5nA INA129, INA128 INA129 Low-Power

More information

Amplifier Selection Guide 1Q 2003

Amplifier Selection Guide 1Q 2003 R E A L W O R L D S I G N A L P R O C E S S I N G TM Amplifier Selection Guide 1Q 2003 Pulse Width Modulation Drivers Power Operational Amplifiers Integrating Voltage-Controlled Gain Logarithmic Isolation

More information

LF411 Low Offset, Low Drift JFET Input Operational Amplifier

LF411 Low Offset, Low Drift JFET Input Operational Amplifier Low Offset, Low Drift JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed input

More information

DUAL ULTRA MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER

DUAL ULTRA MICROPOWER RAIL-TO-RAIL CMOS OPERATIONAL AMPLIFIER ADVANCED LINEAR DEVICES, INC. ALD276A/ALD276B ALD276 DUAL ULTRA MICROPOWER RAILTORAIL CMOS OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The ALD276 is a dual monolithic CMOS micropower high slewrate operational

More information

Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197

Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197 General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This

More information

MCP6041/2/3/ na, Rail-to-Rail Input/Output Op Amps. Features. Description. Applications. Design Aids. Package Types.

MCP6041/2/3/ na, Rail-to-Rail Input/Output Op Amps. Features. Description. Applications. Design Aids. Package Types. 600 na, Rail-to-Rail Input/Output Op Amps Features Low Quiescent Current: 600 na/amplifier Rail-to-Rail Input/Output Gain Bandwidth Product: 14 khz Wide Supply Voltage Range: 1.4V to 6.0V Unity Gain Stable

More information

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers /SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,

More information

PowerAmp Design. PowerAmp Design PAD117A RAIL TO RAIL OPERATIONAL AMPLIFIER

PowerAmp Design. PowerAmp Design PAD117A RAIL TO RAIL OPERATIONAL AMPLIFIER PowerAmp Design RAIL TO RAIL OPERATIONAL AMPLIFIER Rev J KEY FEATURES LOW COST RAIL TO RAIL INPUT & OUTPUT SINGLE SUPPLY OPERATION HIGH VOLTAGE 100 VOLTS HIGH OUTPUT CURRENT 15A 250 WATT OUTPUT CAPABILITY

More information

ST Analog Products for Automotive applications. General Purpose Analog and RF

ST Analog Products for Automotive applications. General Purpose Analog and RF ST Analog Products for Automotive applications General Purpose Analog and RF Added value for SMART DRIVING Rain and Light sensor TSV631IYLT Audio buffer TS922IYPT Power seat motor current control Current

More information

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5

More information

MCP601/1R/2/3/4. 2.7V to 6.0V Single Supply CMOS Op Amps. Features. Description. Typical Applications. Available Tools.

MCP601/1R/2/3/4. 2.7V to 6.0V Single Supply CMOS Op Amps. Features. Description. Typical Applications. Available Tools. MCP60/R///4.7V to 6.0V Single Supply CMOS Op Amps Features Single-Supply:.7V to 6.0V Rail-to-Rail Output Input Range Includes Ground Gain Bandwidth Product:.8 MHz Unity-Gain Stable Low Quiescent Current:

More information

Using Optical Isolation Amplifiers in Power Inverters for Voltage, Current and Temperature Sensing

Using Optical Isolation Amplifiers in Power Inverters for Voltage, Current and Temperature Sensing Using Optical Isolation Amplifiers in Power Inverters for Voltage, Current and Temperature Sensing by Hong Lei Chen, Product Manager, Avago Technologies Abstract Many industrial equipments and home appliances

More information

Zero-Drift, High Voltage, Bidirectional Difference Amplifier AD8207

Zero-Drift, High Voltage, Bidirectional Difference Amplifier AD8207 Zero-Drift, High Voltage, Bidirectional Difference Amplifier FEATURES Ideal for current shunt applications EMI filters included μv/ C maximum input offset drift High common-mode voltage range 4 V to +65

More information

QUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER

QUAD 5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER ADVANCED LINEAR DEVICES, INC. ALD472A/ALD472B ALD472 QUAD 5V RAILTORAIL PRECISION OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The ALD472 is a quad monolithic precision CMOS railtorail operational amplifier

More information

PRACTICAL DESIGN TECHNIQUES FOR SENSOR SIGNAL CONDITIONING

PRACTICAL DESIGN TECHNIQUES FOR SENSOR SIGNAL CONDITIONING 7 PRACTICAL DESIGN TECHNIQUES FOR SENSOR SIGNAL CONDITIONING 1 Introduction 2 Bridge Circuits 3 Amplifiers for Signal Conditioning 4 Strain, Force, Pressure, and Flow Measurements 5 High Impedance Sensors

More information

What? nanowatt? Acquiring sensor data in wireless products with nanowatts of power consumption

What? nanowatt? Acquiring sensor data in wireless products with nanowatts of power consumption 11001101011010 10101010101010 10101010111010 01010011101101 010101 What? nanowatt? Acquiring sensor data in wireless products with nanowatts of power consumption Peggy Liska Texas Instruments Product Marketing

More information

High Common-Mode Voltage, Programmable Gain Difference Amplifier AD628

High Common-Mode Voltage, Programmable Gain Difference Amplifier AD628 High Common-Mode Voltage, Programmable Gain Difference Amplifier AD628 FEATURES FUNCTIONAL BLOCK DIAGRAM High common-mode input voltage range ±20 V at VS = ±5 V Gain range 0. to 00 Operating temperature

More information

1.0V Micropower, SOT23, Operational Amplifier

1.0V Micropower, SOT23, Operational Amplifier 19-3; Rev ; 1/ 1.V Micropower, SOT3, Operational Amplifier General Description The micropower, operational amplifier is optimized for ultra-low supply voltage operation. The amplifier consumes only 9µA

More information

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,

More information

PowerAmp Design. PowerAmp Design PAD112 HIGH VOLTAGE OPERATIONAL AMPLIFIER

PowerAmp Design. PowerAmp Design PAD112 HIGH VOLTAGE OPERATIONAL AMPLIFIER PowerAmp Design Rev C KEY FEATURES LOW COST HIGH VOLTAGE 150 VOLTS HIGH OUTPUT CURRENT 5 AMPS 50 WATT DISSIPATION CAPABILITY 100 WATT OUTPUT CAPABILITY INTEGRATED HEAT SINK AND FAN COMPATIBLE WITH PAD123

More information

Current Sensor Solutions. Hall-IC based. Partners of SSG. Current sensors 2014 Seite: 1

Current Sensor Solutions. Hall-IC based. Partners of SSG. Current sensors 2014 Seite: 1 Hall-IC based Current Sensor Solutions Current sensors 2014 Seite: 1 Hallsensor based current sensors 1 ACS-Modules Range: +/-5, 20, 50, 100, 150, 200A Fully Integrated system Quasi-closed magnetic loop

More information

Introduction to Analog Interfacing. ECE/CS 5780/6780: Embedded System Design. Various Op Amps. Ideal Op Amps

Introduction to Analog Interfacing. ECE/CS 5780/6780: Embedded System Design. Various Op Amps. Ideal Op Amps Introduction to Analog Interfacing ECE/CS 5780/6780: Embedded System Design Scott R. Little Lecture 19: Operational Amplifiers Most embedded systems include components that measure and/or control real-world

More information

MCP6271/1R/2/3/4/ µa, 2 MHz Rail-to-Rail Op Amp. Features. Description. Applications. Available Tools. Package Types

MCP6271/1R/2/3/4/ µa, 2 MHz Rail-to-Rail Op Amp. Features. Description. Applications. Available Tools. Package Types MCP627/R/2/3/4/ 70 µa, 2 MHz Rail-to-Rail Op Amp Features Gain Bandwidth Product: 2 MHz (typical) Supply Current: I Q = 70 µa (typical) Supply Voltage: 2.0V to 6.0V Rail-to-Rail Input/Output Extended Temperature

More information

KENKUL-LoRa Sensor Networks

KENKUL-LoRa Sensor Networks KENKUL- KENKUL-LoRa Sensor Networks KENKUL-LoRa LoRa wireless sensor network system Combination:, LoRa-Gateway and Software supply sensor s working power, and provide multiple signal input, active push

More information

PowerAmp Design. PowerAmp Design PAD20 COMPACT HIGH VOLTAGE OP AMP

PowerAmp Design. PowerAmp Design PAD20 COMPACT HIGH VOLTAGE OP AMP PowerAmp Design Rev C KEY FEATURES LOW COST HIGH VOLTAGE 150 VOLTS HIGH OUTPUT CURRENT 5A 40 WATT DISSIPATION CAPABILITY 80 WATT OUTPUT CAPABILITY INTEGRATED HEAT SINK AND FAN SMALL SIZE 40mm SQUARE RoHS

More information

Dual operational amplifier

Dual operational amplifier DESCRIPTION The 77 is a pair of high-performance monolithic operational amplifiers constructed on a single silicon chip. High common-mode voltage range and absence of latch-up make the 77 ideal for use

More information

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage

More information

Interface Electronic Circuits

Interface Electronic Circuits Lecture (5) Interface Electronic Circuits Part: 1 Prof. Kasim M. Al-Aubidy Philadelphia University-Jordan AMSS-MSc Prof. Kasim Al-Aubidy 1 Interface Circuits: An interface circuit is a signal conditioning

More information

High Voltage, Current Shunt Monitor AD8215

High Voltage, Current Shunt Monitor AD8215 FEATURES ±4 V human body model (HBM) ESD High common-mode voltage range V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead SOIC: 4 C to + C Excellent

More information

Brushless DC motor controller

Brushless DC motor controller NE/SA7 DESCRIPTION The NE/SA/SE7 is a three-phase brushless DC motor controller with a microprocessor-compatible serial input data port; 8-bit monotonic digital-to-analog converter; PWM comparator; oscillator;

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DRW 300-S

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DRW 300-S AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH1DRW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with

More information

LF442 Dual Low Power JFET Input Operational Amplifier

LF442 Dual Low Power JFET Input Operational Amplifier LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while

More information

Sensor Interfacing and Operational Amplifiers Lab 3

Sensor Interfacing and Operational Amplifiers Lab 3 Name Lab Day Lab Time Sensor Interfacing and Operational Amplifiers Lab 3 Introduction: In this lab you will design and build a circuit that will convert the temperature indicated by a thermistor s resistance

More information

Improved Second Source to the EL2020 ADEL2020

Improved Second Source to the EL2020 ADEL2020 Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling

More information

TP5551/TP5552 / TP5554

TP5551/TP5552 / TP5554 Features Low Offset Voltage: 5 μv (Max) Zero Drift:.5 µv/ C (Max) 1/f Noise Corner Down to.1hz: - - 15 nv/ Hz Input Noise Voltage @1kHz 35 nv P-P Noise Voltage @.1Hz to 1Hz Slew Rate: 2.5 V/μs Bandwidth:

More information

High Precision OPERATIONAL AMPLIFIERS

High Precision OPERATIONAL AMPLIFIERS OPA OPA OPA OPA OPA OPA OPA OPA OPA OPA OPA High Precision OPERATIONAL AMPLIFIERS SBOS09A MARCH 999 REVISED APRIL 00 FEATURES ULTRA LOW OFFSET VOLTAGE: 0µV ULTRA LOW DRIFT: ±0.µV/ C HIGH OPEN-LOOP GAIN:

More information

RHT03-SPI Temperature & Humidity Sensor

RHT03-SPI Temperature & Humidity Sensor - Relative humidity and temperature sensor - 相对温度和湿度传感器 - Pre-calculated temperature and humidity read out, no extra calculation needed - 预先计算的温度和湿度读出, 无需额外计算 - Dew Point Calculation possible - 可以计算露点

More information

Thermocouple Conditioner and Setpoint Controller AD596*/AD597*

Thermocouple Conditioner and Setpoint Controller AD596*/AD597* a FEATURES Low Cost Operates with Type J (AD596) or Type K (AD597) Thermocouples Built-In Ice Point Compensation Temperature Proportional Operation 10 mv/ C Temperature Setpoint Operation ON/OFF Programmable

More information

EC kHz, 7μA, CMOS, Rail-to-Rail Operational Amplifier. General Description. Features. Applications. Pin Assignments

EC kHz, 7μA, CMOS, Rail-to-Rail Operational Amplifier. General Description. Features. Applications. Pin Assignments General Description Features The is a single supply, low power CMOS operational amplifier; these amplifiers offer bandwidth of 250kHz, rail-to-rail inputs and outputs, and single-supply operation from

More information

TRANSDUCER INTERFACE APPLICATIONS

TRANSDUCER INTERFACE APPLICATIONS TRANSDUCER INTERFACE APPLICATIONS Instrumentation amplifiers have long been used as preamplifiers in transducer applications. High quality transducers typically provide a highly linear output, but at a

More information

LMC6492 Dual/LMC6494 Quad CMOS Rail-to-Rail Input and Output Operational Amplifier

LMC6492 Dual/LMC6494 Quad CMOS Rail-to-Rail Input and Output Operational Amplifier CMOS Rail-to-Rail Input and Output Operational Amplifier General Description The LMC6492/LMC6494 amplifiers were specifically developed for single supply applications that operate from 40 C to +125 C.

More information

FHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers

FHP3350, FHP3450 Triple and Quad Voltage Feedback Amplifiers FHP335, FHP345 Triple and Quad Voltage Feedback Amplifiers Features.dB gain flatness to 3MHz.7%/.3 differential gain/phase error 2MHz full power -3dB bandwidth at G = 2,V/μs slew rate ±55mA output current

More information

GT MHz, Low Power, CMOS, EMI Hardened, Rail-to-Rail Quad Operational Amplifier. 1. Features. 2. General Description. 3. Applications A0 1/16

GT MHz, Low Power, CMOS, EMI Hardened, Rail-to-Rail Quad Operational Amplifier. 1. Features. 2. General Description. 3. Applications A0 1/16 MHz, Low Power, CMOS, EMI Hardened, Rail-to-Rail Quad Operational Amplifier Advanced. Features Single-Supply Operation from +. ~ +5.5 Low Offset oltage: 5m (Max.) Rail-to-Rail Input / Output Quiescent

More information

Multi-Channel CMOS Front-End IC for Physiological Signal Acquisition 生理信号采集的多通道 CMOS 模拟前端集成电路设计 张金勇王磊于力

Multi-Channel CMOS Front-End IC for Physiological Signal Acquisition 生理信号采集的多通道 CMOS 模拟前端集成电路设计 张金勇王磊于力 Vol 3 No9 / Sep 29 CMOS Front-End IC for Physiological Signal Acquisition 生理信号采集的多通道 CMOS 模拟前端集成电路设计 张金勇王磊于力 ABSTRACT A compacted and low-offset multi-channel CMOS front-end IC for physiological signal

More information

Application Note 01 - The Electric Encoder

Application Note 01 - The Electric Encoder Application Note 01 - The Electric Encoder DF Product Lines - Angular Position Sensors Document No.: AN-01 Version: 3.0, July 2016 Netzer Precision Motion Sensors Ltd. Misgav Industrial Park, P.O. Box

More information

LMC6081 Precision CMOS Single Operational Amplifier

LMC6081 Precision CMOS Single Operational Amplifier LMC6081 Precision CMOS Single Operational Amplifier General Description The LMC6081 is a precision low offset voltage operational amplifier, capable of single supply operation. Performance characteristics

More information

3-Channel Constant Current LED Driver UCS1903

3-Channel Constant Current LED Driver UCS1903 3-Channel Constant Current LED Driver UCS1903 (Products descriptions) The product UCS1903 is the three-channel LED drive control circuit, internal integration MCU digital interface, data latches, LED high

More information

LF353 Wide Bandwidth Dual JFET Input Operational Amplifier

LF353 Wide Bandwidth Dual JFET Input Operational Amplifier LF353 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage

More information

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage

More information

High Voltage Current Shunt Monitor AD8211

High Voltage Current Shunt Monitor AD8211 High Voltage Current Shunt Monitor AD8211 FEATURES Qualified for automotive applications ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage

More information

LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier

LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier LF412 Low Offset, Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost, high speed, JFET input operational amplifiers with very low input offset voltage and guaranteed

More information

AUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S

AUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S AUTOMOTIVE CURRENT TRANSDUCER HC6H1000-S 18198151434 Page 1/ 5 HC6H1000-S Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in

More information

36V, Precision, Low-Power, 90µA, Dual Op Amp

36V, Precision, Low-Power, 90µA, Dual Op Amp EVALUATION KIT AVAILABLE MAX44248 36V, Precision, Low-Power, 9µA, Dual Op Amp General Description The MAX44248 is an ultra-precision, low-noise, zero-drift dual operational amplifier featuring very low-power

More information

AUTOMOTIVE CURRENT SENSOR HC6H500-S. Datasheet

AUTOMOTIVE CURRENT SENSOR HC6H500-S. Datasheet AUTOMOTIVE CURRENT SENSOR HC6H500-S Datasheet Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low

More information

AUTOMOTIVE CURRENT SENSOR HC6H300-S

AUTOMOTIVE CURRENT SENSOR HC6H300-S AUTOMOTIVE CURRENT SENSOR HC6H300-S Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive

More information

300MHz, Low-Power, High-Output-Current, Differential Line Driver

300MHz, Low-Power, High-Output-Current, Differential Line Driver 9-; Rev ; /9 EVALUATION KIT AVAILABLE 3MHz, Low-Power, General Description The differential line driver offers high-speed performance while consuming only mw of power. Its amplifier has fully symmetrical

More information

High Common-Mode Voltage Difference Amplifier AD629

High Common-Mode Voltage Difference Amplifier AD629 a FEATURES Improved Replacement for: INAP and INAKU V Common-Mode Voltage Range Input Protection to: V Common Mode V Differential Wide Power Supply Range (. V to V) V Output Swing on V Supply ma Max Power

More information

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820 a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load

More information

AD596/AD597 SPECIFICATIONS +60 C and V S = 10 V, Type J (AD596), Type K (AD597) Thermocouple,

AD596/AD597 SPECIFICATIONS +60 C and V S = 10 V, Type J (AD596), Type K (AD597) Thermocouple, AD597 SPECIFICATIONS (@ +60 C and V S = 10 V, Type J (AD596), Type K (AD597) Thermocouple, unless otherwise noted) Model AD596AH AD597AH AD597AR Min Typ Max Min Typ Max Min Typ Max Units ABSOLUTE MAXIMUM

More information

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers /2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into

More information

EE 330 Lecture 34. Guest Lecture. Why are there so many Op Amps?

EE 330 Lecture 34. Guest Lecture. Why are there so many Op Amps? EE 330 Lecture 34 Guest Lecture Why are there so many Op Amps? by Jerry Doorenbos of Texas Instruments 1 Op Amp Technology Overview Developed by Art Kay, Thomas Kuehl, and Tim Green Precision Amplifiers

More information

LINEAR IC APPLICATIONS

LINEAR IC APPLICATIONS 1 B.Tech III Year I Semester (R09) Regular & Supplementary Examinations December/January 2013/14 1 (a) Why is R e in an emitter-coupled differential amplifier replaced by a constant current source? (b)

More information

Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP

Micropower, Rail-to-Rail, 300kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP EVALUATION KIT AVAILABLE MAX46 General Description The MAX46 op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for batterypowered applications such as handsets, tablets,

More information

Differential Amplifiers

Differential Amplifiers Differential Amplifiers Benefits of Differential Signal Processing The Benefits Become Apparent when Trying to get the Most Speed and/or Resolution out of a Design Avoid Grounding/Return Noise Problems

More information

Working with ADCs, OAs and the MSP430

Working with ADCs, OAs and the MSP430 Working with ADCs, OAs and the MSP430 Bonnie Baker HPA Senior Applications Engineer Texas Instruments 2006 Texas Instruments Inc, Slide 1 Agenda An Overview of the MSP430 Data Acquisition System SAR Converters

More information

250 MHz, General Purpose Voltage Feedback Op Amps AD8047/AD8048

250 MHz, General Purpose Voltage Feedback Op Amps AD8047/AD8048 5 MHz, General Purpose Voltage Feedback Op Amps AD8/AD88 FEATURES Wide Bandwidth AD8, G = + AD88, G = + Small Signal 5 MHz 6 MHz Large Signal ( V p-p) MHz 6 MHz 5.8 ma Typical Supply Current Low Distortion,

More information

MIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp

MIC915. Features. General Description. Applications. Ordering Information. Pin Configuration. Pin Description. Dual 135MHz Low-Power Op Amp MIC915 Dual 135MHz Low-Power Op Amp General Description The MIC915 is a high-speed, unity-gain stable operational amplifier. It provides a gain-bandwidth product of 135MHz with a very low, 2.4mA supply

More information

NE/SA5234 Matched quad high-performance low-voltage operational amplifier

NE/SA5234 Matched quad high-performance low-voltage operational amplifier INTEGRATED CIRCUITS Supersedes data of 2001 Aug 03 File under Integrated Circuits, IC11 Handbook 2002 Feb 22 DESCRIPTION The is a matched, low voltage, high performance quad operational amplifier. Among

More information

MOSA ELECTRONICS. Features. Description. MS8870 DTMF Receiver

MOSA ELECTRONICS. Features. Description. MS8870 DTMF Receiver Features Complete DTMF receiver Low power consumption Adjustable guard time Central Office Quality CMOS, Single 5V operation Description O rdering Information : 18 PIN DIP PACKAGE The is a complete DTMF

More information

I/O Op Amps with Shutdown

I/O Op Amps with Shutdown MHz, μa, Rail-to-Rail General Description The single MAX994/MAX995 and dual MAX996/ MAX997 operational amplifiers feature maximized ratio of gain bandwidth to supply current and are ideal for battery-powered

More information

High Voltage, Current Shunt Monitor AD8215

High Voltage, Current Shunt Monitor AD8215 High Voltage, Current Shunt Monitor AD825 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead

More information

Selecting and Using High-Precision Digital-to-Analog Converters

Selecting and Using High-Precision Digital-to-Analog Converters Selecting and Using High-Precision Digital-to-Analog Converters Chad Steward DAC Design Section Leader Linear Technology Corporation Many applications, including precision instrumentation, industrial automation,

More information

Single-Supply, 42 V System Difference Amplifier AD8206

Single-Supply, 42 V System Difference Amplifier AD8206 Single-Supply, 42 V System Difference Amplifier FEATURES Ideal for current shunt applications High common-mode voltage range 2 V to +65 V operating 25 V to +75 V survival Gain = 20 Wide operating temperature

More information

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP FEATURES Digitally/pin-programmable gain G = 1, 2, 4, 8, 16, 32, 64, or 128 Specified from 55 C to +125 C 5 nv/ C maximum input offset

More information

MAX44244/MAX44245/MAX V, Precision, Low-Power, 90µA, Single/Quad/Dual Op Amps

MAX44244/MAX44245/MAX V, Precision, Low-Power, 90µA, Single/Quad/Dual Op Amps EVALUATION KIT AVAILABLE MAX/MAX/MAX V, Precision, Low-Power, 9µA, General Description The MAX/MAX/MAX family of parts provide ultra-precision, low-noise, zero-drift single/quad/ dual operational amplifiers

More information

8-Bit, high-speed, µp-compatible A/D converter with track/hold function ADC0820

8-Bit, high-speed, µp-compatible A/D converter with track/hold function ADC0820 8-Bit, high-speed, µp-compatible A/D converter with DESCRIPTION By using a half-flash conversion technique, the 8-bit CMOS A/D offers a 1.5µs conversion time while dissipating a maximum 75mW of power.

More information

Differential Amplifier : input. resistance. Differential amplifiers are widely used in engineering instrumentation

Differential Amplifier : input. resistance. Differential amplifiers are widely used in engineering instrumentation Differential Amplifier : input resistance Differential amplifiers are widely used in engineering instrumentation Differential Amplifier : input resistance v 2 v 1 ir 1 ir 1 2iR 1 R in v 2 i v 1 2R 1 Differential

More information

High Current High Power OPERATIONAL AMPLIFIER

High Current High Power OPERATIONAL AMPLIFIER OPA High Current High Power OPERATIONAL AMPLIFIER FEATURES WIDE SUPPLY RANGE: ±V to ±V HIGH OUTPUT CURRENT: A Peak CLASS A/B OUTPUT STAGE: Low Distortion SMALL TO- PACKAGE APPLICATIONS SERVO AMPLIFIER

More information

INTEGRATED CIRCUITS. AN109 Microprocessor-compatible DACs Dec

INTEGRATED CIRCUITS. AN109 Microprocessor-compatible DACs Dec INTEGRATED CIRCUITS 1988 Dec DAC products are designed to convert a digital code to an analog signal. Since a common source of digital signals is the data bus of a microprocessor, DAC circuits that are

More information

Precision, Low-Power and Low-Noise Op Amp with RRIO

Precision, Low-Power and Low-Noise Op Amp with RRIO MAX41 General Description The MAX41 is a low-power, zero-drift operational amplifier available in a space-saving, 6-bump, wafer-level package (WLP). Designed for use in portable consumer, medical, and

More information

Advanced Linear Products. Industrial, Instrumentation and Automotive Products (IIA)

Advanced Linear Products. Industrial, Instrumentation and Automotive Products (IIA) Advanced Linear Products Industrial, Instrumentation and Automotive Products (IIA) CORE TECHNOLOGY HCMV IA 00, 01 Focus 02 Focus Strategy - Leverage Broad Product Portfolio and Customer Base into Higher

More information

Introduction. Theory of Operation

Introduction. Theory of Operation Mohan Rokkam Page 1 12/15/2004 Introduction The goal of our project is to design and build an automated shopping cart that follows a shopper around. Ultrasonic waves are used due to the slower speed of

More information

Micropower, Single and Dual Supply Rail-to-Rail Instrumentation Amplifier AD627

Micropower, Single and Dual Supply Rail-to-Rail Instrumentation Amplifier AD627 a FEATURES Micropower, 85 A Max Supply Current Wide Power Supply Range (+2.2 V to 8 V) Easy to Use Gain Set with One External Resistor Gain Range 5 (No Resistor) to, Higher Performance than Discrete Designs

More information

Op Amp Technology Overview. Developed by Art Kay, Thomas Kuehl, and Tim Green Presented by Ian Williams Precision Analog Op Amps

Op Amp Technology Overview. Developed by Art Kay, Thomas Kuehl, and Tim Green Presented by Ian Williams Precision Analog Op Amps Op Amp Technology Overview Developed by Art Kay, Thomas Kuehl, and Tim Green Presented by Ian Williams Precision Analog Op Amps 1 Bipolar vs. CMOS / JFET Transistor technologies Bipolar, CMOS and JFET

More information

Very Low Distortion, Precision Difference Amplifier AD8274

Very Low Distortion, Precision Difference Amplifier AD8274 Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum

More information

Module Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc

Module Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc HSI Series Modules Selection Guide HSI Series Modules Single channel High bandwidth - for dynamic signals Isolation (all models Analog signal output (±5 V Single channel modularity For DEWETRON systems

More information

SAR ADCs Feature Speed, Low Power, Small Package Size and True Simultaneous Sampling

SAR ADCs Feature Speed, Low Power, Small Package Size and True Simultaneous Sampling L DESIGN FEATURES SAR ADCs Feature Speed, Low Power, Small Package Size and True Simultaneous Sampling Introduction When it comes to quickly digitizing analog signals from a few hertz to a few megahertz,

More information

Application Note 80. July How to Use the World s Smallest 24-Bit No Latency Delta-Sigma TM ADC to its Fullest Potential AN80-1

Application Note 80. July How to Use the World s Smallest 24-Bit No Latency Delta-Sigma TM ADC to its Fullest Potential AN80-1 July 1999 How to Use the World s Smallest 24-Bit No Latency Delta-Sigma TM ADC to its Fullest Potential Frequently Asked Questions About Delta-Sigma ADCs and the LTC2400 By Michael K. Mayes Linear Technology

More information

V OUT. +Denotes lead(pb)-free/rohs-compliant package. PART

V OUT. +Denotes lead(pb)-free/rohs-compliant package. PART 9-346; Rev 2; / 2kHz, 4µA, Rail-to-Rail General Description The single MAX99/MAX99 and dual MAX992/ MAX993 operational amplifiers (op amps) feature a maximized ratio of gain bandwidth (GBW) to supply current

More information

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820

Single Supply, Rail to Rail Low Power FET-Input Op Amp AD820 a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive

More information

High-side Current Sensing Techniques for the isppac-powr1208

High-side Current Sensing Techniques for the isppac-powr1208 February 2003 Introduction Application Note AN6049 The isppac -POWR1208 provides a single-chip integrated solution to power supply monitoring and sequencing problems. Figure 1 shows a simplified functional

More information

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide

More information

Current-mode PWM controller

Current-mode PWM controller DESCRIPTION The is available in an 8-Pin mini-dip the necessary features to implement off-line, fixed-frequency current-mode control schemes with a minimal external parts count. This technique results

More information

AC Current click PID: MIKROE Weight: 27 g

AC Current click PID: MIKROE Weight: 27 g AC Current click PID: MIKROE-2523 Weight: 27 g AC Current click can measure alternating currents up to 30A and it features the MCP3201 ADC (analog to digital) converter and the MCP607 CMOS Op Amp, both

More information