Gladiator G1 Series. Microwave Waveguide Information. Data Sheet. Overview. A Higher Level of Performance. Beam Blockage Detection

Transcription

1 Higher Level of Performance Data Sheet Gladiator G Series Microwave Waveguide Information eam lockage Detection For more information, please visit >

2 Unit must have T mounting thread ( SP) GR or GS Waveguide oncept M-WG0 M-WG Waveguides M-WG0-L=xxx *where xxx = System with Waveguide length extensions of pipe in for mm remote mounting / signal transmission. Waveguides can be used for difficult to access areas or to isolate the electronics from high temperature or non-compatible processes Unit must have M-WG T mounting thread ( SP) M-WG02 Safe / accessible / hazard free area M-WG0 M-WG Unit must have T mounting thread ( SP) Non accessible / High temperature / Hazard area GR or GS Safe / accessible / hazard free area M-WG0 M-WG M-WG0-L=xxx *where xxx = length of pipe in mm Non accessible / High temperature / Hazard area M-WG M-WG02 M-WG0 M-WG Unit must have T mounting thread ( SP) 2

3 Waveguides with Process Seals Waveguides with windowed weldment / coupling process seals System with Waveguide extensions for remote mounting / signal transmission. Waveguides can be used for difficult to access areas or to isolate the electronics from high temperature or non-compatible processes Process Pictured system: () GR with T ( SP) thread (2) GS with T ( SP) thread () Qty2 of M-WG0 Process M2-W-SS Weldment / coupling with UHMW window 5 5 () Qty2 of M-WG0-L=xx (5) Qty2 of M-WG0 2 2 eramic windows for high temperature applications Process Process 5 5 Pictured system: () GR with T ( SP) thread (2) GS with T ( SP) thread () Qty2 of M-WG0 () Qty2 of M-WG02 (5) Qty2 of M-WG0 M6 Weldment with ceramic window

4 accessible / / ture temperature Example / / Setup rd area Example Waveguide setup with exploded parts M-WG0 ( horn) with M-WG ( teflon window) can be swapped with M-0 (-/2 horn) with M-WG2 (2 teflon plug). G unit with T ( SP) thread 0-L=xxx x = pipe in mm Locking nut (included with G unit) M-WG0 Threaded connecter connects unit to pipe. M-WG Locking nut M-WG0 Straight pipe M-WG G unting thread ( SP) ad ( SP) M-WG0 Straight pipe M-WG02 bend pipe M-WG pipe to pipe threaded connecter M-WG Locking nut M-WG teflon window M-WG Locking nut M-WG pipe to pipe threaded connecter M-WG Locking nut M-WG Locking nut M-WG0 waveguide horn M-WG02 end pipe Non accessible / High temperature / Hazard area Non accessible / High temperature / Hazard area

5 Dimensions Waveguides and Waveguide ccessories dditional mounting accessory variants and materials including high temperature ceramics are available. See Gladiator Gen Microwave datasheet available at ll dimensions in mm M-WG0 M-WG0 with M-WG window M-WG0 /" SP /" SP /" SP M-WG02 /" SP 7.8 M-WG " SP M-WG2 88 " NPT THD M-WG0-L=xxx /" SP on either ends 2" SP Min Min L= ustomer specified 60 M-WG M-WG 9 5 " SP /" SP /" SP INT /" SP 5

6 Part Numbers G Series Model GS Gladiator Microwave Integral Sender GR Gladiator Microwave Integral Receiver, Relay with Failsafe Electronics Housing (Sensor element is 6L with Teflon face) S Powder oated luminium 6L Stainless Steel Power Supply 2VD U 2VD and V Mounting Thread T SP pprovals X Not Required 22 TEX Grp II at GD T85 IP67 Tamb -0 to 70 GS T X Mounting ccessories M UHMW Window & mild steel weldment/coupling each -SS UHMW Window & 6L stainless steel weldment/coupling each -UW UHMW Window each -W mild steel weldment/coupling each -W-SS 6L stainless steel weldment/coupling each 2 2 UHMW Window & mild steel weldment/coupling each 2-SS 2 UHMW Window & 6L stainless steel weldment/coupling each 2-UW 2 UHMW Window each 2-W 2 mild steel weldment/coupling each 2-W-SS 2 6L stainless steel weldment/coupling each M 2 dditional mounting accessory variants and materials including high temperature ceramics are available. See Gladiator Gen Microwave datasheet available at Waveguides & Waveguide accessories M-WG 0 6L Threaded connector for Sender / Receiver 02 6L 90deg bend pipe (50mm + 50mm). Includes qty 2 of M-WG 0 6L -/2 Wave guide horn. Includes qty of M-WG and qty of M-WG 0 6L Wave guide horn assembly. Includes qty of M-WG and qty of M-WG 0-L= 6L Straight pipe extension L= length in mm. Includes qty 2 of M-WG 6L Locking nut 2 2 SP teflon plug with socket to match M-WG0 horn 6L Pipe to pipe connector coupling Teflon window to match M-WG0 Horn. Fits into M8 weldment. M-WG 0 6

7 Specifications Specifications See G Microwave datasheet for full specifications available at Temperature 6L parts: 800 o Mild steel parts: 500 o eramic parts (alumina ceramic 95%) -50 to 800 o Teflon parts: 250 o UHMW parts: 80 o O-ring seals: NR (Nitrile) 90 o. O-ring can be replaced with appropriate material for application. Distance Maximum 5m of Waveguides Minimum with end pipe: M-WG0 with bend pipe M-WG0 with bend pipe 0 50 ll dimensions in mm end Pipes Maximum 2 per side Pipe Sealing Use sealing appropriate for atmosphere / application. Ingress into Waveguides may affect unit performance Weights M-WG0: 0.2kg M-WG02: 0.6kg M-WG0: 0.kg M-WG0:.kg M-WG: 0.025kg M-WG2: 0.2kg M-WG: 0.kg M-WG: 0.kg M-WG0L=: 0.2kg per 0cm 7

8 Higher Level of Performance HWK, Since 988 Remote Innovation Hawk Measurement Systems Pty Ltd (HWK) was established in 988. It's founding members saw the universal requirement of various industries requiring improved process control and efficiency in their operations. We an Help HWK understands the difficulties customers face when seeking accurate level measurement. Every application is different, involving a multitude of environmental factors. This is where HWK excels. Our aim is to ensure that customers feel comfortable with our technology, and are provided with long term and reliable solutions. We believe that a combination of application and product expertise, as well as forward thinking and proactive support policies are the foundation of successful customersupplier relationships. Progressive Technical Support HWK believes that the future of the Level Measurement Industry revolves around the quality of pre and post sales - support. Our aim is for all sales & support staff to be product experts, and more importantly application experts making our customers applications as efficient and consistent as possible. HWK understands the need for immediate technical assistance. The HWKLink G communication device allows any computer with internet access and our free GosHawk diagnostic & calibration software; to dial in, calibrate, test, and check the performance of HWK products. This innovative system allows our Global Support Team to assist with commissioning and after sales service of HWK equipment worldwide. Measurement problems are addressed as they happen; not days or weeks later. Knowledge Sharing HWK believes that knowledge sharing is key to creating long term relationships. Empowering our customers and our worldwide distribution network, whilst being available at all times to lend a helping hand, is the perfect recipe for long term solutions and relationships. HWK openly extends an invitation to share our 25 years of level measurement experience, and ensure that your day to day processes are efficient, understood, and always working. ll company or product names are registered trademarks or trademarks of their respective owners. Hawk Measurement Systems (Head Office) 5-7 Maurice ourt Nunawading VI, USTRLI Phone: Fax: info@hawk.com.au Hawk Measurement 96 Glenn Street Lawrence, M 08, US Phone: HWKLEVEL ( ) Phone: Fax: info@hawkmeasure.com For more information and global representatives: dditional product warranty and application guarantees upon request. Technical data subject to change without notice. Represented by: DO-GMI-SWITH-WP&G-DT Rev