Jumper Assembly Pressure Balanced Oil Filled Cabling Solutions
|
|
|
- Augustine Morgan
- 5 years ago
- Views:
Transcription
1 DEUTSCH Rochester Cable SEACON Jumper Assembly Pressure Balanced Oil Filled Cabling Solutions
2 SEACON Jumper Assembly Pressure Balanced Oil Filled Cabling Solutions Rugged Durability that Runs Deep Subsea jumper assemblies and distribution harnesses are provided by TE Connectivity (TE) s SEACON for use with subsea connectors. Many subsea electrical and optical cable and connection systems utilize Pressure Balanced Oil Filled (PBOF) cabling solutions. These hoses and junction boxes utilize an elastomeric tube as a conduit for electric wires and fiber optic lines. The elastomeric conduit is filled with a compensating fluid, allowing the sea pressure to equalize the pressure differential within the interior oil volume. Reliable Operation FIELD RELIABILITY Temperature and pressure Compensated Tested to 450 bar Ozone protection EASE OF USE Designed for ROV handling Good ROV maneuverability during connector mating Deployment techniques similar to jacketed cable PULL TESTED Each assembly tension tested at 3750 N High visibility, orange in color Two layer design with tension and pressure armor in between This option for cabling helps to provide a reliable and configurable cable system suitable for many subsea applications. This technology has been widely utilized in ocean science observatories, towed arrays, drilling systems, production control systems and Remotely Operated Vehicle (ROV) systems to name a few. PBOF solutions have become a critical component in many subsea systems today and TE s SEACON is pleased to offer this solution with its subsea fiber optic and electrical connectors. SPECIFICATIONS Design Life: > 25 years in operation subsea Volume compensation capacity: >12% Break Load by Tension: Approx. 10,000 N (break at end terminations) Operating Temperature: -5 C to +40 C Storage Temperature: -40 C to +70 C Compatibility: Seawater, Silicone Fluid Dimensions: Inner: 13mm and 20mm Outer: 25mm and 32mm Hose Materials: Inner Liner SBR (Styrene-Butadiene Rubber) Outer Jacket NBR (Nitrile Butadiene Rubber) PVC (Polyvinyl Chloride) Armour Polyester Strain Element Armour - Polyester Strain Element Inner Liner - SBR Outer Jacket - NBR/PVC TE Components... TE Technology... TE Know-how... AMP AGASTAT CII HARTMAN KILOVAC MICRODOT NANONICS POLAMCO Raychem Rochester DEUTSCH SEACON Phoenix Phoenix Optix AFP SEACON Empower Engineers to Solve Problems, Moving the World Forward. PAGE 2
3 Jumper Assembly A Range of Compatible Fittings MKII: Straight, 45 and 90 bend, JIC-8 and JIC-2 options Materials (Others available upon request): - STAINLESS STEEL, 316L - SUPER DUPLEX - TITANIUM, GR.2 - Nickel-Chromium alloy 625, GR.1 Anti-rotation crimp sleeve system Crimp sleeve electrically connected Double Barrier against water ingress - Double o-ring sealing - Metal to metal sealing Rubber fitting protector MKII with 45 and 90 Bend MKII MKII with Fitting Protector JIC Splitter Properties Applicable for multi-leg jumpers where it is desired to split wires from one up to maximum three connectors. Available in 13mm and 20mm MKII fitting interface. Other fitting interfaces upon request. Available in two configurations: 1 in 2 out & 1 in 3 out. Compact and flexible. Saddle blocks optional for fixing purposes. Materials: - STAINLESS STEEL, 316L - SUPER DUPLEX - TITANIUM, GR.2 - Nickel-Chromium alloy 625, GR.1 PAGE 3
4 Jumper Assembly Splice Cannisters Applicable for multi-leg jumpers where soldering of pigtails is necessary Available in 13mm and 20mm MKII fitting interface. Other fitting interfaces upon request Available in different configurations up to 4 in 4 out Saddle blocks optional for fixing purposes Materials: - STAINLESS STEEL, 316L - SUPER DUPLEX - TITANIUM, GR.2 - INCONEL 625, GR.1 Double O-ring barrier. O-ring material in NBR 70 (Others available upon request) Silicone oil filled and pressure compensated by the connected hoses 13mm Splice Cannister 20mm Splice Cannister Splice Cannister Arrangements 13x1 13x2 13x3 13x4 Ø x1 20x2 20x3 20x4 Ø PAGE 4
5 Jumper Assembly Inline Splice/Splitter Assembly: General Specifications Available in multiple configurations: 1-1, 1-2 and up to 4-4 Designed for use in oil filled environment with boot seal working as second barrier Small enough to fit into standard 20mm PBOF hose assemblies Part of dual sealing system Test Data IR 1000 VDC/1 min, Conductor to water >20 Gohm Tested to 345 bar Tension Load Tested: 4 mm2 > 52 kg, 16 AWG >9,5 kg CAN Bus Resistor Assembly: General Specifications 120 Ω can resistor Designed for use in oil filled environment with boot seal working as second barrier. Small enough to fit into standard 20mm PBOF hose assemblies Power: >5 Watt Test Data IR 1000 VDC/1 min, Conductor to water >20 Gohm Tested to 450 bar Tension Load Tested: Assembly >9,5 kg, Single resistance > 1,5 kg Bend kink diameter: <5mm PAGE 5
6 LET S CONNECT We make it easy to connect with our experts and are ready to provide all the support you need. Just call your local support number or visit to chat with a Product Information Specialist. Technical Support te.com/support-center SEACON US Inside Sales: Phone: bellvillesales@te.com Website: SEACON Norway Inside Sales: Phone: post.ps.no@te.com Website: North America North America (Toll) EMEA/South Africa EMEA (Toll) India (Toll-Free) Asia Pacific Japan Australia New Zealand +64 (0) seaconworldwide.com 2017 TE Connectivity. All Rights Reserved. 08/17 Rev 4 SEACON, SEACON (logo), DEUTSCH, Rochester Cable, TE, TE Connectivity and the TE connectivity (logo) are trademarks. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
Power Systems for Topside and Subsea Applications
DEUTSCH Rochester Cable Power Systems for Topside and Subsea Power Connectors for Topside Power Systems for Topside and Subsea and Subsea Withstand the Hazards of Offshore At TE Connectivity (TE), we want
AEROSPACE, DEFENSE & MARINE /// KCS03 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 600 A/28 VDC 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
AEROSPACE, DEFENSE & MARINE /// KCS01 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 100 V / 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
Antennas For Aerospace and Defense
Antennas For Aerospace and Defense Applying TE s Leading Consumer and Composite Technologies to Deliver Lighter, Smaller Solutions for Harsh Environments in Aerospace and Defense Advanced Antennas The
MINICUBE TRANSCEIVERS FOR VIDEO & ETHERNET
MiniCube Transceiver modules offer high density single-mode duplex LC fiber interface for high-speed serial digital video links as well as GbE Ethernet applications. Well suited for lower power, cost effective
Controls and Communications Connectors Diamould electrical connectors
Controls and Communications Connectors Diamould electrical connectors APPLICATIONS Subsea production systems controls Connectivity to tree, manifold, choke, and chemical injection metering valve (CIMV)
ROCHESTER CABLES ENGINEERED CABLE SOLUTIONS FOR HARSH ENVIRONMENTS
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/ documentaty style or portrait of engineer. Human photo.
AEROSPACE, DEFENSE & MARINE /// KILOVAC KCS03 CURRENT SENSING CONTACTOR
Current-Sensing High-Voltage Contactor 600 A/28 VDC 600 VDC Bi-Directional Power Switching in a Rugged, Compact Package with Integrated Current Sensor and Current Trip Function Current-Sensing High-Voltage
CLOUDSPLITTER Connector System PRELIMINARY
CLOUDSPLITTER Connector System The CLOUDSPLITTER connector system is a single cable solution for powered devices that delivers Cat5e performance and up to 250 watts of power over a single cable. The 8
369 Series Connectors
KEY FEATURES 3, 6 and 9 way configurations Based on existing ARINC 809 / EN4165 Composite materials Robust design Fully sealed cable and mating interface Mounting of inline with cable-tie Button latching
METAL SHELL SERIES DRY-MATE CONNECTORS
METAL SHELL SERIES DRY-MATE CONNECTORS METAL SHELL SERIES DRY-MATE CONNECTORS INTRODUCTION The well established jéí~äpüéääpéêáéë (jpp) of connectors are designed to withstand full ocean depth pressure
Introducing IDC SSL Connector
Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto
TABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES
CABLES FOR MOTION CONTINUOUS-BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS PRE-ASSEMBLED CABLES STRAIN RELIEF DEVICES FOR CABLE CARRIERS EDITION 09-2012 Durable, reliable, cost-effective
INDEX OF REVISIONS DESCRIPTION AND/OR AFFECTED SHEETS
E&P Pag. 1 / 14 Pre-salt Standard Steel Tube Umbilical Types Umbilical Electrical Cable Element DPT-SUB/ES/DCT INDEX OF REVISIONS REV DESCRIPTION AND/OR AFFECTED SHEETS 0 Original ORIGINAL REV. A REV.
Freescale Semiconductor Data Sheet: Technical Data
Freescale Semiconductor Data Sheet: Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Sensor for Measuring Absolute, On-Chip Signal Conditioned, Temperature Compensated and
Introducing. CII FCA-150 Series Relay 50 Amps, 1PST/NO (DM) CII FCAC-150 Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts Key Features Non-latching relay Balanced force design Corrosion protected metal enclosure
INTRODUCTION. pb^`lk PHOENIX
pb^`lk PHOENIX INTRODUCTION pb^`lk Phoenix located in Ashaway, Rhode Island is an affiliate of the pb^`lk Group of companies and specializes in the manufacture of glass sealed electrical connectors, feed
P3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
Miniature pressure sensor
SPECIFICATIONS Ranges 0.5 to 350 bar [7 psi to 5 000 psi] Absolute, sealed and gauge Titanium construction For static and dynamic applications Linearity up to ±0.25% FS The XP5 serie is designed in titanium
Rochester Brand Engineered Cable Solutions for Harsh Environments
Rochester Brand Engineered Cable Solutions for Harsh Environments Smarter, Faster Better No Matter How Deep You Go TE Connectivity s (TE) Rochester brand brings advanced technology to the design and manufacture
MINI-SAS HIGH DENSITY
MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity s (TE s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount
INTRODUCTION. pb^`lk PHOENIX
pb^`lk PHOENIX INTRODUCTION pb^`lk Phoenix located in Ashaway, Rhode Island is an affiliate of the pb^`lk Group of companies and specializes in the manufacture of glass sealed electrical connectors, feed
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
XPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING
Commercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
Extreme Environment Interconnect Product Selection Guide
A Product Guide Extreme Environment Product Selection Guide Electrical, Optical, and Hybrid Solutions SURFACE SHALLOW WATER DEEP WATER DOWNHOLE 6 RUGGED INTERCONNECT SOLUTIONS FOR CHALLENGING SUBSEA &
Dry-mate and wet-mate Burton subsea connectors. Subsea connectors and cable assemblies
Dry-mate and wet-mate Burton subsea connectors Subsea connectors and cable assemblies Commercial and military subsea connectors and cable assemblies Eaton s 0-year track record of uncompromised reliability
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
Special Crimping Machines for Loose Piece Terminals
Special Crimping Machines for Loose Piece Terminals Crimping Machines for Loose Piece Terminals Common Features of AT Crimping Machines for loose piece terminal applications Economic and flexible processing
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
One Team, Two Companies, Unique Strength
One Team, Two Companies, Unique Strength Hydro Group Plc. Who We Are Hydro Group specialises in design and manufacture of subsea and harsh environment electrical and optical cables, connectors, penetrators,
Torque Sensor Accessories and Services
------------------- Torque Sensor Accessories and Services Highlights Strain gage signal conditioners Cable assemblies Speed sensors Shunt calibration modules and thermocouples Calibration services PCB
Navy Shipboard Interconnect and Wire Protection Applications
Navy Shipboard Interconnect and Wire Protection Applications Glenair: US Navy Qualification Pedigree 30+ year NAVSEA supplier NAVSEA-approved topside composite junction boxes QPL MIL-DTL-28840 electrical
SolderSleeve One-Step Wire and Cable Terminators. Selection Guide
R SolderSleeve One-Step Wire and Cable Terminators Selection Guide Splicing wire to wire Terminating wire to component terminal Terminating coaxial cables Terminating ground wire to cable shield Preinstalled
A Division of Engtek Manoeuvra Systems Pte Ltd. SubSea Propulsion Technology
Engtek SubSea Systems A Division of Engtek Manoeuvra Systems Pte Ltd SubSea Propulsion Technology SubSea Hydraulic Thruster Systems The enclosed data, information, description, photos and illustrations
JAQUET DSD.7x. Dual Channel Hall Effect Speed Sensor for Railway Applications Compliant with EN Product identification.
JAQUET DSD.7x Dual Channel Hall Effect Speed Sensor for Railway Applications Compliant with EN 50155 General Function The speed sensors family DSD.7x are suitable for generating two 90 phase-shifted square
Poseidon Reference Manual
Page 1 of 11 Table of Contents 1 Revision History... 2 2 Introduction... 3 3 Part Numbers and Ordering Options...4 3.1 Standalone Unit... 4 3.2 Accessories... 4 4 Specifications... 5 4.1 Mechanical Drawings...5
Contacts M39029 and Glenair signature solutions MIL-DTL Series III type
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated
SureGrip TM. XWWarning
80PK-22 SureGrip TM Immersion Temperature Probe Instruction Sheet XWWarning To avoid electrical shock, do not use this probe when voltages exceeding 24 V ac rms or 60 V dc are present. The probe tip is
M5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The M5200 pressure
TRAXLINE CABLES FOR MOTION
TRAXLINE CABLES FOR MOTION CONTINUOUS BENDING HI-FLEX ELECTRICAL CABLES TOTALTRAX TURN-KEY SYSTEMS TRAXLINE PRE-ASSEMBLED CABLES FOR CABLE CARRIERS EDITION 5-2016 Cost-effective, reliable, durable cables
Selection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
Type PB Load Cell. Approvals OIML approval to C3 (Y = 7 500; Y = for 375 kg capacity)
Type PB Load Cell IP65 Product Description The type PB is a very low profile planar beam load cell. Its unique Flintec design allows for an extremely low scale construction. Using 3 or 4 type PB load cells
Non-Submersible Industrial Pressure Transducer
Non-Submersible Industrial Pressure Transducer KPSI Transducers Series 27, 28, 30 FEATURES Custom Pressure Ranges up to 2000 (13,790 kpa) Accuracy to ±0.10% FS Analog Outputs of 4-20 ma or VDC Welded 316
For Frequencies up to 110 GHz. RPC-1.00 Connectors TEST & MEASUREMENT
For Frequencies up to 110 GHz RPC-1.00 Connectors TEST & MEASUREMENT degs Bending test of RPC-1.00 cable assembly, standard length Bending Test 90 @ R = 1 inch Difference of phase (before-after bending)
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
TSSP-1 (Stainless Steel Thermistor Probe) Manual Rev A
TSSP-1 (Stainless Steel Thermistor Probe) Manual 57-6028 Rev A This page intentionally left blank. 2 2014 Dyacon, Inc Contents NOTICES...4 Copyright 2014 Dyacon, Inc...4 Manufacturer...4 Declarations...5
SKDG Cable Repair Kit Instructions
SKDG Cable Repair Kit Instructions Description Having to repair your EasyHeat cable is an extremely rare occurrence. Damage is almost always a function of field conditions, such as impacts with tools.
4200 JSP, KSP, LSP and MSP Cabinets
4200 JSP, KSP, LSP and MSP Cabinets Instructions May 1995 Issue 1, 34-7037-9012-0 1 2 Contents: 1.0 General... 4 2.0 Description of Cabinets... 4 3.0 Accessories and Optional Cross Connect Test Probes...
Profibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
MEDIUM VOLTAGE
WWW.GENERGYCABLE.COM 800-308-1330 TM MEDIUM VOLTAGE MEDIUM VOLTAGE ASSEMBLIES Type SH Medium Voltage Power Cable Assemblies are designed for heavy-duty MV applications that require temporary or permanent
TE Connectivity Wire Connectors
Pre-insulated wire connectors have been designed specifically to answer the need for inexpensive, insulated electrical terminations. They can be used in almost every type of residential and commercial
Glenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications
General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires
kwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
Series 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
With these 2 sections option we try to get the most out of your LD Mosfet Transistor.
LPF 2M 1KW+ LDMOS LPF 2M 1KW+ LDMOS is an 1KW+ Filter, developed for use with the latest generation High Power LD Mosfet transistors. These extreme high power semiconductors have very high gain and often
Precision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
Medium Voltage Power Cables
N2XSY 6/0, /20, /30 NA2XSY 6/0, /20, /30 N2XS2Y 6/0, /20, /30 NA2XS2Y 6/0, /20, /30 N2XS(F)2Y 6/0, /20, /30 NA2XS(F)2Y 6/0, /20, /30 N2XSEY 3 x 6/0 Medium Voltage Power Cables Photo: HELUKABEL Q 47 Medium
Data Sheet P993 Low Range Differential Pressure PCB Mount Sensor
Data Sheet P993 Low Range Differential Pressure PCB Mount Sensor Main Features Electrical Connection Pressure Connection Housing Material Output Signal 1, 2, 5, 10, ±1, ±2, ±5 Inches of H2O 3 solderable
14 AWG 2 AWG: 600 Volt
INDUSTRIAL AUTOMATION & PROCESS CONTROL CABLES 18.70 600V Type MC Metal Clad and Teck-Style Cables Overview Metal Clad Interlocked PVC Outer Jacket Teck-Style PVC Outer Jacket Introduction Polyester Wrap
AVAILABLE SIZES. Label Length (mm) Label Length (inches) PART NUMBER EXAMPLE EET P 4. Color (Yellow) Material (Polyester) Width (15.
Pressure sensitive adhesive labels for safety, warning and electrical box identification. The labels are designed to protect against abrasion, environmental and chemical exposure. Electrical and safety
Professional Features: Base Unit Includes: Required Options: TECHNICAL SPECIFICATIONS
SEMIAUTOMATIC WIRE FEEDERS Portable, Semiautomatic Wire Feeder The LN-15 is one of the smallest and most maneuverable s for the construction, shipbuilding and pipeline industries. It uses a high temperature,
Instructions for Preparing OPTICAL GROUND WIRE IN AN ISOLATOR
Instructions for Preparing OPTICAL GROUND WIRE IN AN ISOLATOR NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS ARE THE PROPERTY OF AFL, ARE ISSUED IN STRICT CONFIDENCE
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
CRIMP CONNECTORS & ACCESSORIES Universal Crimp Termination System. Heavy-duty lightweight stamped steel frame.
Universal Crimp Termination System Extron Universal Crimp Tool Four in One Coax BNC Connector Crimp Tool The affordable heavy-duty Universal BNC Crimp Tool was designed by Extron to be the single tool
HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches TE Connectivity offers the Tiny line of switches in a range of ratings from 0.4VA up to 3A @125 VAC. The extensive product line includes
Model RH. Rod End In-line Tension Load Cell DESCRIPTION FEATURES
Rod End In-line Tension Load Cell DESCRIPTION Model RH, with male and female threads, is a high output rod end load cell designed to be mounted inline to the load axis to measure tension. The outputs for
IR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems DESIGN SUPPORT TOOLS Models Available MECHANICAL DATA Pinning: 1 = carrier OUT, 2 = GND, 3 = V S 19026 click logo to get started FEATURES Photo detector and
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with electrical output signal For the process industry High overload safety up to the 10-fold full scale value, max. 40 bar Models PGT43.100 and
3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving
OTC Paper Number: OTC PP
OTC Paper Number: OTC-17309-PP Paper Title: Underwater Optical and Electrical Connector Systems, Technical Innovations Craig Newell & Gary Brown, SEA CON / Brantner & Associates Inc. Copyright 2005, Offshore
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
With these 2 sections option we try to get the most out of your LD Mosfet Transistor.
LPF 6M 1KW+ LDMOS LPF 6M 1KW+ LDMOS is an 1KW+ Filter, developed for use with the latest generation High Power LD Mosfet transistors. These extreme high power semiconductors have very high gain and often
Maximum rated voltage is the limiting voltage
Key Features Metal film technology Non-flammable High power in small package High stability, reliability and uniformity characteristics Good performance for pulse applications Defined interruption behavior
Look No Further... Materials & Finishes. Specifically made for all your: Gigabit Ethernet, HDMI, USB 2.0/3.0 Needs! onnectors
1 Look No Further... Specifically made for all your: igabit Ethernet, HDMI, US 2.0/3.0 Needs! Amphenol Aerospace now offers a connector series that can be used for all of your multi-media needs. This series
AVX Wire-to-Wire Connectors
AVX Wire-to-Wire Connectors www.avx.com Version 13.8 Table of Contents THRU-WIRE CONNECTORS............................................................................................. 2-8 18-26 AWG 1
1. This is an integrated product combining a bearing with a rotation sensor that detects the speed and direction of rotation.
1. This is an integrated product combining a bearing with a rotation sensor that detects the speed and direction of rotation. 2. With a wide variety of models and advanced functions available, these bearings
U5300 Industrial Pressure Transducer
SPECIFICATIONS Superior Accuracy and Total Error Band Instrument Grade and Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof
SURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE Submitted for recognition as an American National Standard Issued Not Revised 1999-05-17 Superseding REV. MAY99 Draft FEB99 Working Draft Reduced Physical Layer, 250K
Interview: SEA CON s REPORTER. July/August M T R
MARINE TECHNOLOGY July/August 2012 www.seadiscovery.com REPORTER Interview: SEA CON s Craig Newell M T R Five Minutes with SEA CON CON Craig Newell, SEA CON s VP of Sales & Corporate Business Development.
Professional Electrician Pliers
Professional Electrician Pliers n Professional quality tools for maximum life and performance n Forged of vanadium alloy steel provides excellent durability n Precision mated blades for easy cutting n
M5200 Industrial Pressure Transducer
CE Compliant Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Compound DESCRIPTION The M5200 pressure transducers
Look No Further... Materials & Finishes. Specifically made for all your: Gigabit Ethernet, HDMI, USB 2.0/3.0 Needs! onnectors
1 Look No Further... Specifically made for all your: igabit Ethernet, HMI, US 2.0/3.0 Needs! Amphenol Aerospace now offers a connector series that can be used for all of your multi-media needs. This series
EPIH Sub-Miniature Pressure sensor
Sub-Miniature Pressure sensor SPECIFICATIONS Ranges 0.35 to 20 bar (5 to 300 psi) Extremely small size Flush diaphragm High frequency response Various housings available The EPIH is a subminiature pressure
HIGH VOLTAGE MULTI-PIN CONNECTORS. INTRODUCTION Teledyne Reynolds high voltage multi-pin connectors are known industry
HIGH VOLTAGE MULTI-PIN CONNECTORS INTRODUCTION Teledyne Reynolds high voltage multi-pin connectors are known industry of high voltage connectors capable of operating at altitudes of 70,000 feet wide for
protim-r Module
200200 protim-r Module Description The 200200 dual-input protim-r (DIN Rail mount) provides two channels of measurement. All acceleration-to-velocity (A-V) channels condition the signal from an accelerometer
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER
MHM5 SERIES ETHERNET/IP ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Solid shaft version Ø 10mm standard, with Ø 6mm optional Precision ball bearings with sealing flange High temperature
Light Guide Overview
Light Guide Overview 2 Fiber-Optic Basics Light guides are an important component in optimizing an optical system as they connect the various functional units such as the light source to a probe or a probe
protim-c Module Bently Nevada* Asset Condition Monitoring
200250 protim-c Module Bently Nevada* Asset Condition Monitoring Description The 200250 dual-input protim-c (conduit mount) provides 2 channels of measurement. All acceleration-to-velocity (A-V) channels
Test Cable Assemblies
Test Cable Assemblies DC-65 GHz 8851 SW Old Kansas Ave. Stuart, FL 34997 USA +1-772-286-9300 +1-800-544-5594 sales@emc-rflabs.com www.emc-rflabs.com Premium Test Cable Lab-Flex 200 Frequency to 31 GHz
Professional Electrician Pliers
Professional Electrician Pliers n Professional quality tools for maximum life and performance n Forged of vanadium alloy steel provides excellent durability n Precision mated blades for easy cutting n
FIT Sleeving for Rugged Applications
FIT Sleeving for Rugged Applications Rugged sleeving for harsh applications Now you can get tough, rugged woven sleeving for applications demanding superior abrasion resistance, high operating temperatures,