3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX
|
|
|
- Martin Tate
- 5 years ago
- Views:
Transcription
1 Shrunk Delta Ribbon (SDR) Cable Assembly Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame grabber applications 11 shielded, twisted twinax pairs with four drain wires Double overall shield with inner foil and outer braid Rugged ribbon contact type Rugged thumbscrew retention R/A overmolded MDR backshells eliminate bend radius issues See Regulatory Information Appendix (RIA) for chemical compliance information Date Modified: December 17, 2007 Sheet 1 of 4 Physical Connector Contact Plating: Wiping Area: 30 μ [ 0.76 μm ] Min Gold Underplating: 100 μ [ 2.55 μm ] Nickel Shell Options: Color: Parchment / Beige & Black Material: Overmolded option: Polyvinyl Chloride (PVC) & Acrylonitrile Butadiene Styrene (ABS) Cable: Color: Parchment / Beige Jacket Material: Polyvinyl Chloride (PVC) Flammability: AWM VW-1 Marking: logo Electrical Voltage Rating: 30 V Current Rating: 0.5 A Insulation Resistance: Withstanding Voltage: Ω min at 100 V DC 125 V AC RMS for 1 minute Environmental Temperature Rating: 0 C to +70 C UL File No.: E Camera Link is a certification mark of Automated Imaging Association.
2 Shrunk Delta Ribbon (SDR) Cable Assembly Length Figure 1 R/A SDR to Straight MDR Cable Assembly Figure 2 R/A SDR Connector ( -76 Option) Figure 3 R/A SDR Connector ( -77 Option) Figure 4 SDR R/A Overmolded Connector Figure 5 MDR Straight Connector Note: 1. For length dimension, refer to the product ordering number. Sheet 2 of 4
3 Shrunk Delta Ribbon (SDR) Cable Assembly Length Figure 6 R/A MDR To Straight SDR Cable Assembly Figure 7 R/A MDR Connector ( -86 Option ) Figure 8 R/A MDR Connector ( -87 Option ) Figure 9 MDR R/A Connector Figure 10 SDR Straight Connector Note: 1. For length dimension, refer to the product ordering number. Sheet 3 of 4
4 Shrunk Delta Ribbon (SDR) Cable Assembly CN-1 Conn. Pos. Base Configuration Full / Medium configuration Cable CN-2 Conn. Pos. 2 XO- YO- YO- XO- 25 TWINAX 1 15 XO+ YO+ YO+ XO X1- Y1- Y1- X1-24 TWINAX 2 16 X1+ Y1+ Y1+ X X2- Y2- Y2- X2-23 TWINAX 3 17 X2+ Y2+ Y2+ X XC- Yclk- Yclk- XC- 22 TWINAX 4 18 XC+ Yclk+ Yclk+ XC+ 9 6 X3- Y3- Y3- X3-21 TWINAX 5 19 X3+ Y3+ Y3+ X Ser TC+ 100 ohm 100 ohm Ser TC+ 20 TWINAX 6 20 Ser TC- Terminated Terminated Ser TC- 7 8 Ser TFG- ZO- ZO- Ser TFG- 19 TWINAX 7 21 Ser TFG+ ZO+ ZO+ Ser TFG+ 6 9 CC1- Z1- Z1- CC1-18 TWINAX 8 22 CC1+ Z1+ Z1+ CC CC2+ Z2- Z2- CC2+ 17 TWINAX 9 23 CC2- Z2+ Z2+ CC CC3- Zclk- Zclk- CC3-16 TWINAX CC3+ Zclk+ Zclk+ CC CC4+ Z3- Z3- CC4+ 15 TWINAX CC4- Z3+ Z3+ CC DRAIN WIRE Shell BRAID Shell Table 1 Cable Assembly Wiring Diagram Ordering Information 1MF26-L5XX-00C-XXX (RIA E1 & C1 apply) 76 = Straight discrete MDR backshell to a R/A (cable dresses down) overmolded SDR. 77 = Straight discrete MDR backshell to a R/A (cable dresses up) overmolded SDR. 86 = R/A (cable dresses down) overmolded MDR to a straight overmolded SDR. 87 = R/A (cable dresses up) overmolded MDR to a straight overmolded SDR. Length =: 100 = 1m 200 = 2m 500 = 5m A00 = 10m Refer to length dimension in figures 1 & 3 Reference notes 1 & 2 for cable length tolerance Notes: 1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm 2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length Sheet 4 of 4
5 Regulatory Information Appendix Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product is RoHS Compliant 2005/95/EC. the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as This product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/717/EC. the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. RIA-2217B-c
6 Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. Appendix C2: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with s Regulatory Information Appendix, then s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-c
7 Appendix C3: China RoHS Electronic Industry Standard of the People s Republic of China, SJ/T , Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T , means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by in writing, this information represents s best knowledge and belief based upon information provided by third party suppliers to. The numerical reference in the symbol above should not be construed as a representation regarding the product s life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with s Regulatory Information Appendix, then s entire liability and Buyer s exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at s option, to replace or repair the product or refund the purchase price of the product. Except where prohibited by law, will not be liable for any indirect, special, incidental or consequential loss or damage arising from this product, regardless of the legal theory asserted. 3 Electronics Interconnect Products 6801 River Place Blvd. Austin, TX U.S.A Please recycle. Printed in USA All rights reserved. RIA-2217B-c
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX
3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX Supports new AIA Industrial Camera Link Standard for new Mini C/L camera to C/L frame
3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC
M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC Supports Industrial Camera Link standard for camera to frame grabber communications Space-saving
3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZX-XXX-04C Flexible cable enables moving head applications. For machine vision camera to frame grabber
3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C
M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZB-XXX-04C Flexible cable enables moving head applications. Mates to popular M MDR 26 position receptacle
3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC
M Cable Assembly Supports Industrial CameraLink in Automated Imaging Association for camera to frame grabber communications 11 shielded twin-ax pairs and four drain wires Entire cable bundle is shielded
3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36
PRODUCT SPECIFICATION 3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36 PS-0082 Rev. B Page 1 of 8 3M 2012. All rights Reserved Table of Contents Section Content Page Cover page 1 Contents
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
3M Power Clamp Wiremount Connectors
Instructions Scope: This document describes the termination instructions for 3M Power Clamp Wiremount Connectors Series 355 and 358. 3M Part Numbers 35505-6XX0-XXX XX 35805-6XX0-XXX XX Applicable Documents:
Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
Product Specification. 3M Cable Assemblies for QSFP+ FDR Applications, Copper
78-5102-0198-7 A Product Specification 3M Cable Assemblies for QSFP+ FDR Applications, Copper Document Number: 78-5102-0198-7 A Issue Date: Jul 04, 2014 Subject: 3M Cable Assemblies for QSFP+ FDR Applications
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)
POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 CABLE DRAWING: CAB-0XXX (SALEM CODE) DRAWING TITLE: ATIM-T Power Cable DRAWING NO.:
3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised
Page 1 of 7 Product Specification 78-5102-0099-7 Revised 11-16-11 Contents Title Page and Contents......................................................... 1 1.0 Scope....................................................................
Product Data Sheet. 3M SFP+ Direct-Attach Passive Copper Cable Assembly
78-512-114-4 E Product Data Sheet 3M SFP+ Direct-Attach Passive Copper Cable Assembly 3Electronics Materials Solutions Division 681 River Place Blvd. Austin, TX 78726-9 http://www.3m.com/interconnects
3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
3M Electrically Conductive Double-Sided Nonwoven Tape 9750
Technical Data October 2013 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 Product Description 3M Electrically Conductive Double-Sided Nonwoven Tape 9750 is an isotropically electrical conductive
Product Data Sheet. 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper
78-512-114-4 D Product Data Sheet 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper Subject: 3M Cable Assemblies for SFP+ Applications Page: 1 of 14 Table of Contents 1. SCOPE...
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions
3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions Contents 1.0 Purpose....................................... 1 2.0 Development Kits..................................
Signal Integrity Test Report
PD-0098 Signal Integrity Test Report 3M External MiniSAS Cable Assemblies 3 Electronic Solutions Division Subject: 3M External MiniSAS Cable Assembly Page: 1 of 14 Table of Contents 1.0 Scope... 2 2.0
3M Locator Plate
M Locator Plate 44-119 Instructions for the Assembly of Series 158 2 mm x 2 mm Socket Connectors 1.0 General The Locator Plate 44-119 is designed for rapid assembly of all available pin count positions
TABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
Signal Integrity Product Specification
PD--0077 Signal Integrity Product Specification 3M SFP+ Passive Direct Attach Copper Cable Assembly 3 Electronic Solutions Division Page: 1 of 9 Table of Contents 1.0 Scope... 4 2.0 Product Tested... 4
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
3M Scotchlok Copper/ Aluminum Compression Lugs, Series
Copper/ Aluminum Compression s, 40000 Series Data Sheet January 2014 Description Agency Approvals and Self Certifications Copper/Aluminum Compression s 40000 Series are made of high conductivity aluminum
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723
Technical Data November, 2009 M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 Product Description M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 972 is an isotropically
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 178-025-613R571 0.03540 Environment
Executive Summary. Industry urges the Technical Adaptation Committee (TAC), as a matter of utmost priority, to:
AeA Europe-EICTA-ESIA-JBCE-CECED-Orgalime Guidance on the implementation of Directive 2002/95/EC on the Restrictions on the Use of Certain Hazardous Substances in electrical and electronic equipment (RoHS)
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide
3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide Installing a cabinet with stakes Instructions July 2016 78-0015-3106-6 2 July 2016 78-0015-3106-6
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 General Description: PTZ (CCTV+Control+Power) Cable, Rated-CM, 1-RG59 20 AWG solid bare copper with foam polyolefin, 95% bare copper braid, 1-22 AWG stranded
IN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS
FEATURES NEC's φ50 µm InGaAs APD IN COAXIAL PACKAGE FOR 2.5Gb/s APPLICATIONS SMALL DARK CURRENT: ID = 7 na HIGH SENSITIVITY: S = 0.94 A/W at λ = 0 nm, M = S = 0.96 A/W at λ = 550 nm, M = HIGH SPEED RESPONSE:
Materials Declaration
Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 179-015-413R491 0.02620 Environment
3M Dynatel Triple Play Customer Service Test Set INS970
3M Dynatel Triple Play Customer Service Test Set Advanced Diagnostics Software Options DELT, SELT and Spectral Analysis The Test Set has the ability to run advanced diagnostics in different scenarios to
HEAVY DUTY COPPER CABLE LUGS
Industrial products we wholesale, you distribute (SEAMLESS TUBULAR) (TIN PLATED) (SEAMLESS TUBULAR) (NON-PLATED) UL LISTED 4909 Rondo Drive, Fort Worth, Texas 76106, USA Telephone: 1-877-732-0342 Fax:
COMMISSION DELEGATED DIRECTIVE../ /EU. of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2014) XXX draft COMMISSION DELEGATED DIRECTIVE../ /EU of XXX amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Coax (2-1505A Type) 20 AWG BC, GIFPE isulation, Duofoil plus TC braid (95% cv.), PVC inner jackets. Pairs (4-9451 Type): 22 AWG TC, PP insul.,
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3
3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3 Instructions October 2013 3 1.0 Table of contents 1.0 Summary...3 2.0 Cable and Fiber Preparation...4
TECHNICAL SPECIFICATIONS PP1 Series
TECHNICAL SPECIFICATIONS Series Specifications Series Revision B Page: 1 / 10 1.0 SCOPE This specification describes the operating parameters, testing requirements, approvals, materials, and part numbering
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. For more information please call 1-800-Belden1 See Put-ups and Colors Description:
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet
3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet Instructions July 2011 3 Contents 1.0 General... 3 2.0 Cabinet Overall Description... 3 3.0 Tools Required... 4 4.0 Kit Contents...
Features. Block Diagram
Features WATT SMT SINGLE SMT Technology 2:1 Input Range Efficiency up to 8 I/O Isolation 100 Short Circuit Protected MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
2018 Liquid Solder Flux RoHS Product Certificate of Compliance
2018 Liquid Solder Flux RoHS Product Certificate of Compliance All Lead-Free Solder products meet the requirements of the following RoHS standards: EU Directive 2015/863 of 31 March 2015, amending Annex
3M Clear Track Hallway Fiber Pathway
Communication Markets Division 3M Clear Track Hallway Fiber Pathway The 3M Clear Track Hallway Fiber Pathway provides an aesthetic pathway for use in brownfield Multi Dwelling Units (MDU) and multitenant
INSTRUCTIONS MODEL AVX-TFR-STUD TEST JIG FOR USE WITH AVTECH AVR-EBF6-B FORWARD RECOVERY TEST SYSTEMS SERIAL NUMBER:
AVTECH ELECTROSYSTEMS N A N O S E C O N D P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 W A V E F O R M E L E C T R O NI C S S I N C E 1 9 7 5 TEL: 888-670-8729 (USA & Canada) or +1-613-686-6675 (Intl)
MINI-SAS HIGH DENSITY
MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity s (TE s) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount
PRELIMINARY DATA SHEET. NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE WITH DRIVER FOR 10 Gb/s APPLICATIONS
PRELIMINARY DATA SHEET FEATURES NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE WITH DRIVER FOR 10 Gb/s APPLICATIONS INTEGRATED ELECTROABSORPTION MODULATOR INTERNAL DRIVER IC UP TO 40
Detailed Specifications & Technical Data
For more Information please call 1-800-Belden1 Description: Banana Peel Composite - (2) Cat 5e 4-pair 24 AWG unshielded plus (2) Series 6 Coax with Duobond IV Quad shield, polyolefin insulation on the
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
3M Dynatel Far End Device III
3M Dynatel Far End Device III User s Guide PAIR 1 GND CO PAIR 2 F1 F2 STATUS Dynatel Far End Device III 1 1/2 0 Future-Proof Testing Platform February 2009 78-8140-2657-7-A 3 2 3M Dynatel Far End Device
1 310 nm FOR 156 Mb/s, 622 Mb/s, 1.25 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE
DESCRIPTION LASER DIODE 0 nm FOR 56 Mb/s, 6 Mb/s,.5 Gb/s, FTTH InGaAsP MQW-FP LASER DIODE The is a 0 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode with InGaAs monitor PIN-. These
INSTRUCTIONS MODEL AVX-S1-P0D-MS1A PLUG-IN SOCKET OUTPUT MODULE SERIAL NUMBER:
A V T E C H E L E C T R O S Y S T E M S L T D. N A N O S E C O N D W A V E F O R M E L E C T R O N I C S S I N C E 1 9 7 5 P.O. BOX 265 OGDENSBURG, NY U.S.A. 13669-0265 TEL: 888-670-8729 (USA & Canada)
PT4800FE000F PT4800FE000F. Opaque Resin, Medium Directivity Angle, Thin Package Phototransistor. Features. Agency Approvals/Compliance.
PT48FEF Opaque Resin, Medium Directivity Angle, Thin Package Phototransistor Features 1. Side view detection thin package 2. Plastic mold with opaque resin lens 3. Peak sensitivity wavelength: 86 nm (TYP.)
COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION DELEGATED DIRECTIVE (EU).../ of XXX amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the
DF-LDL2-41X16. CCS Inc Copyright(c) 2009 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited.
DF-LDL-41X1 Third Angle Projection Units: mm 4 8.4 (3.). Copyright(c) 09 CCS Inc. All rights reserved. Reproduction or photocopy without permission is prohibited. CCS Inc. Common Specifications LED color
PT480FE0000F. Phototransistor PT480FE0000F. Features. Agency Approvals/Compliance. Applications
Phototransistor Features 1. Side view detection type 2. Plastic mold with resin lens 3. Narrow directivity angle 4. Visible light cut-off resin 5. Lead free and RoHS directive component Agency Approvals/Compliance
ACT-IR220L/LE IrDA Serial Port Adapter
ACT-IR220L/LE IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type
GP2Y0A41SK0F Distance Measuring Sensor Unit Measuring distance : 4 to 30 cm Analog output type Description GP2Y0A41SK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
Table 1: Pb-free solder alloys of the SnAgCu family
Reflow Soldering 1. Introduction The following application note is intended to describe the best methods for soldering sensors manufactured by Merit Sensor using automated equipment. All profiles should
Part Number: 7953A Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor
Part Number: Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor Product Description Four Cat 6 23 AW G solid bare copper conductors, bonded pair polypropylene insulation,
3.0 GHz DIVIDE BY 4 PRESCALER
. GHz DIVIDE BY PRESCALER UPB5GV FEATURES TEST CIRCUIT HIGH FREUENCY OPERATION TO GHz FIXED DIVIDE RATIO: LOW CURRENT CONSUMPTION: 5 ma at 5 V SMALL PACKAGE: 8 PIN SSOP AVAILABLE IN TAPE AND REEL Power
Thin Film Rectangular Chip Resistors
www.vishay.com,,, Thin Film Rectangular Chip Resistors FEATURES Metal film layer on high quality ceramic Protective top coat Pure tin on nickel barrier layer Low temperature coefficient and tight tolerances
Scotchlok UR2 Connector
Scotchlok UR2 Connector Technical Report July 2001 80-6104-1674-7-B Contents: 1.0 Background...1 2.0 Description...1 3.0 Test Program Overview...2 4.0 Connection Stability...2 4.01 Stress Relaxation...3
PT480E00000F. Phototransistor PT480E00000F. Features. Agency Approvals/Compliance. Applications
PT48EF Phototransistor Features. Side view detection type. Plastic mold with resin lens 3. Narrow directivity angle 4. Transparent resin. Lead free and RoHS directive component Agency Approvals/Compliance.
Surface Mount Power Resistor Thick Film Technology
Surface Mount Power Resistor Thick Film Technology FEATURES AEC-Q200 qualified 20 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range from 0.01 to
MODULATION LIGHT SOURCE FOR DWDM APPLICATIONS
LASER DIODE NX8563LA Series 1 550 nm InGaAsP MQW-DFB LASER DIODE MODULE 2.5 Gb/s DIRECTLY MODULATION LIGHT SOURCE FOR DWDM APPLICATIONS DESCRIPTION The NX8563LA Series is a 1 550 nm Multiple Quantum Well
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
THIS DOCUMENT OVERIDES ALL OTHER DOCUMENTATION WITH THE EXCEPTION OF THE READ ME FILE AND DRAWING SUPPLIED WITH THE DATA.
Page 1 of 6 THIS DOCUMENT FORMS PART OF THE PURCHASING CONDITIONS AND SUPPLIERS MUST NOTE THAT GOODS WILL NOT BE ACCEPTED UNLESS THEY COMPLY WITH THE FOLLOWING REQUIREMENTS: THIS DOCUMENT OVERIDES ALL
GL4800E0000F. Infrared Emitting Diode GL4800E0000F. Features. Agency Approvals/Compliance. Applications
GL4800E0000F Infrared Emitting Diode Features. Side view emission type. Plastic mold with resin lens 3. Medium directivity angle (Δθ: ±30 TYP.) Peak emission wavelength: 950 nm TYP. 4. Radiant flux φe:
2SC0106T2A0-12 Preliminary Data Sheet
Dual-channel ultra-compact cost-effective SCALE -2+ driver core Short Description The cost-effective SCALE -2+ dual-driver core combines unrivalled compactness with broad applicability. The driver is designed
Agilent 1GG Packaged 13.5 GHz GaAs Diode Limiter
Agilent 1GG5-8205 Packaged GaAs Diode Limiter TC626P Data Sheet Features ESD Protection: 3000V Human Body Model Insertion Loss: 1.0 db Typ. Port Match: S 11 and S 22 15 db Typ. Power Handling: P 1dB 25
1 Form A Solid-State Relay
1 Form A Solid-State Relay i17966_6 DESCRIPTION The is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. APPLICATIONS Security systems Instrumentation Industrial controls
Surface Mounted Power Resistor Thick Film Technology
Surface Mounted Power Resistor Thick Film Technology DIMENSIONS in millimeters FEATURES AEC-Q200 qualified 25 W at 25 C case temperature Surface mounted resistor - TO-252 (DPAK) style package Wide resistance
SiGe:C LOW NOISE AMPLIFIER FOR GPS
DESCRIPTION The µpc8tn is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise amplifier for GPS. This device exhibits low noise figure and high power gain characteristics,
3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY
3 Dynatel M Series Locating and Marking System NEW- TO- THE- WORLD TECHNOLOGY PIN- POINT ACCURACY SAFETY DAMAGE PREVENTION Introducing the 3M Dynatel M-iD Series Locating and Marking System. NEW TECHNOLOGY
Types MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
Metal Film Resistors, Non-Magnetic, Industrial, Precision
CMF Non-Magnetic Metal Film Resistors, Non-Magnetic, Industrial, Precision STANDARD ELECTRICAL SPECIFICATIONS GLOBAL HISTORICAL MAXIMUM WORKING VOLTAGE (1) V (1) Continuous working voltage shall be P x
ACT-IR220Li/220LN IrDA Serial Port Adapter
ACT-IR220Li/220LN IrDA Serial Port Adapter Product Specification Summary ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com
C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 01,, 05 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings
Gap : 1.7mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter
GP1S194HCZ0F Gap : 1.7mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter Description GP1S194HCZ0F is a compact and low-profile, transmissive photointerrupter with photo-transistor
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS)
MEMO/08/763 Brussels, 3 December 2008 Questions and answers on the revised directive on restrictions of certain dangerous substances in electrical and electronic equipment (RoHS) What is RoHS about? The
1 Form A Solid-State Relay
Form A Solid-State Relay S S' FEATURES Current limit protection 6 DESCRIPTION The LH56AEF ( pin SOP) is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch ( form
GL100MN0MPx. Surface Mount Type, Infrared Emitting Diode. GL100MN0MPx. Agency Approvals/Compliance. Features. Model Line-up.
GL0MN0MPx Surface Mount Type, Infrared Emitting Diode Features 1. Compact and thin SMD package 2. Top view and side view mountable 3. Plastic mold with resin lens 4. Peak emission wavelength: 940 nm TYP.
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS8741 FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
DESCRIPTION FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER PHOTOCOUPLER PS8741 NEPOC Series The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
DISCONTINUED. California Eastern Laboratories NX8564LE NX8565LE NX8566LE SERIES
FEATURES NEC's EA MODULATOR INTEGRATED InGaAsP MQW DFB LASER DIODE MODULE FOR 2.5 Gb/s ULTRALONG-REACH 360, 600, 240 km DWDM APPLICATIONS INTEGRATED ELECTROABSORPTION MODULATOR VERY LOW DISPERSION PENALTY:
PSC Power Paddle II Antenna
PSC Power Paddle II Antenna Frequency Range of 450Mhz to 700Mhz PSC Exclusive Feature Works as Passive or Active Antenna PSC Exclusive Feature Excellent RF Performance Robust, Skeletal Design Switchable
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
WSS-M99P48-A3: 3 Foam Performance, PressureSensitive Adhesive Tape. Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications)
W-M99P48-A3: 3 W-M99P48-A3 Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications) Technical Bulletin November, 2016 3M tested the following adhesive tapes to the Automotive OEM
GL480E00000F. Infrared Emitting Diode GL480E00000F. Features. Agency Approvals/Compliance. Applications
GL480E00000F Infrared Emitting Diode Features. Side view emission type. Plastic mold with resin lens 3. Medium directivity angle (Δθ: ±3 TYP.) Peak emission wavelength: 950 nm TYP. 4. Radiant flux φe:
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally
Detailed Specifications & Technical Data
Description: 24 AWG stranded (7x32) TC conductor, Datalene insulation, pairs individually shielded with bonded Beldfoil with a drain wire and have numbered and color-coded PVC jackets, overall Beldfoil