AccuTrak Rotary Position Monitors Explosionproof/Flameproof ATEX/IEC

Transcription

1 ccutrak Rotary Position Monitors Explosionproof/Flameproof TEX/IEC Rotary position monitors certified to Ex II G and specifically engineered for hazardous environments. vailable with either low-copper aluminium or stainless steel enclosures, they are available with a range of position sensors and switches. Features Flameproof design meeting a wide range of worldwide approvals. Touch set cams are hand adjustable, spring loaded and self-locking providing quick calibration of position switches and sensors. trong durable Beacon TM offers º visual indication available in a choice of styles and colors. Terminal strips are pre-wired and numbered with generous working space for ease of use. dditional conduit for easy field wiring and mounting accessories as standard. Wide range of switches and sensors. Position transmitter option. witch stabilisation plate. tandardized mounting pattern for easy adaptation to common bracketry. Range of drive shaft options. luminium enclosures with ultralow copper content (.% maximum) ensure robust performance in corrosive environments. Rugged stainless steel enclosures. IP rated plugs certified where applicable. Technical Data gency approvals rea classification (TEX/ IEC) eries Ex II G Ex d IIB +H Ex td 1 IPX eries Ex II G Ex d IIC Ex td 1 IPX Enclosure standards (IEC) ll enclosures witches IP/7 V PDT mechanical switches Magnum PDT (hermetically sealed proximity type) switches eries GO hermetically sealed switches Enclosures luminium tainless steel (Option 1L) WETD-97-EN-1

2 [ ] 8. [ 1.1 ] 1.9 [. ]. [. ] [. 1 ] [.].98 [. 19 ].7 [ ] 1. [ ]. [1. 9 ] 77.7 [. 9 ].7 [ ] 17.7 [. 9 ] ccutrak Rotary Position Monitors Explosionproof/Flameproof TEX/IEC eries enclosure dimensions 98.8 [.89 ] 1. [.] CONDUIT ENTRY x MX EE OPTION TBLE ON HOUING MCHINING DRWING FOR DETIL 7.1 Q [. ] 8. [1.1 ] HOLE M X 1.P X.7 DEEP EXTERNL ERTH (M) VIEW ON UNDERIDE [.] HOLE /1-18 UNC X. DEEP OR M8 X 1.P X 8 DEEP. /F [.] [.191].98 /F.9.17 [.17] OPTIONL HFT RRNGEMENT NMUR HFT RRNGEMENT.11 [.9] Dimensions in mm, where available imperial dimension (inches) in parentheses Technical specifications Materials of construction Enclosure Temp. range haft and hardware Bushing Beacon visual indicator Drive shaft tandard luminium with powder coat finish tainless steel with electropolished finish - C to +8 C (Flat cover - C to +8 C) tainless steel Oil impregnated bronze (aluminium enclosure) PTFE (stainless steel enclosure) Co-polyester Double-D with ¼ /F Option NMUR standard VDI/VDE 8 vailable switches Please consult your sales office for any other requirements V PDT mechanical switches Magnum PDT (hermetically sealed proximity type) switches GO hermetically sealed switches Conduit entries ccutrak position monitors are available with a choice of conduit entries. Please see the selection guide for standard entries. witches and sensors For further information see our switches and sensors data sheet. Page

3 [. ] [. ]. 98 [. 1 7 ] [ ]. [. 9 ].8 [ 1. 8 ] [. 8 ] [. 18 ] 78 [. 8] [. 9 8 ] [ ] 11 [ ] [. ] 1. [.9] ccutrak Rotary Position Monitors Explosionproof/Flameproof TEX/IEC eries enclosure dimensions 81. [.189] TYP PON HOLE. T HRO. [1.7 ] 8. [.1 ]. [1.7] 7.1 Q [.] CONDUIT TYP CONDUIT B CONDUIT C 17 [.8 ] COVER LOCkING CREW 1. [. ] 8. [.8] 189 mm CLERNCE FOR TOP COVER REMOVL HOLE M8 X 1.P THRO BECON FIXING M.7 [.] EXTERNL ERTH M VILBLE CONDUIT IzE; M X 1.P H M X 1.P H 1/ - 1 NPT / - 1 NPT G 1/ (CONDUIT PECIFIED T TIME OF ORDER)..8 [.191].98 [.17] [.7] NMUR HFT DETIL OPTIONL HFT DETIL...8. Dimensions in mm, where available imperial dimension (inches) in parentheses Technical specifications Materials of construction Enclosure Temp. range haft and hardware Bushing Beacon visual indicator Drive shaft tandard Please consult your sales office for any other requirements luminium with powder coat finish tainless steel with electropolished finish - C to +11 C tainless steel with electropolished finish Oil impregnated bronze (aluminium enclosure) PTFE (stainless steel enclosure) Co-polyester Double-D with ¼ /F Option NMUR standard VDI/VDE 8 vailable switches V PDT mechanical switches Magnum PDT (hermetically sealed proximity type) switches Conduit entries ccutrak position monitors are available with a choice of conduit entries. Please see the selection guide for standard entries. witches and sensors For further information see our switches and sensors data sheet. Page

4 ccutrak Explosionproof Rotary Position Monitors eries election Guide Housing with flanged lid Cover style With Beacon visual indication No visual indication witch type GO switch PDT Microswitch PDT contacts Microswitch DPDT contacts P&F sensor Other inductive sensor Magnum proximity switch No switches fitted Material luminium tainless steel Beacon type and colour BY R GR Black/Yellow NI Red/White Green/Red No Beacon fitted Drive shaft type N B1 B B B7 B9 Westlock standard ¼ /F (. mm) NMUR standard shaft VDI/VDE 8 ncillary options BM-1 pattern 9 BM- pattern 9 BM- pattern 9 BM-7 pattern 18 BM-9 pattern 18 No ancillary options witch/sensor quantity 1 No switch/sensor fitted One switch/sensor Two switches/sensors Three switches/sensors Four switches/sensors Five switches/sensors (consult sales office) ix switches/sensors (consult sales office) Conduit entries supplied Two entries standard Four entries (consult sales office) Unit specification Dz DV FN tandard build- M conduit entries ¾ NPT conduit entries M conduit entries ½ NPT conduit entries Non-standard material (consult sales office) Certification I TEX IECEx Other options (consult sales office) Revision R Internal revision # 9 BY N R1 = Model number 9BYN-R1 pecifying your position monitor pecifying a position monitor is a complex process as there are many variables which affect each individual application. To ensure that you receive the best possible combination for your monitoring requirement, please contact your local sales office for advice and guidance from one of our experts. Hazardous area classification Please see our data sheet for further information on the global standards affecting the specification and installation of equipment in hazardous areas. Page

5 ccutrak Explosionproof Rotary Position Monitors eries election Guide Housing with screw lid Cover style With Beacon visual indication No visual indication witch type Microswitch PDT contacts Microswitch DPDT contacts P&F sensor Other inductive sensor Magnum proximity switch No switches fitted Material luminium tainless steel Beacon type and colour BY R GR Black/Yellow NI Red/White Green/Red No Beacon fitted Drive shaft type N B1 B B B7 B9 Westlock standard ¼ /F (. mm) NMUR standard shaft VDI/VDE 8 ncillary options BM-1 pattern 9 BM- pattern 9 BM- pattern 9 BM-7 pattern 18 BM-9 pattern 18 No ancillary options witch/sensor quantity 1 No switch/sensor fitted One switch/sensor Two switches/sensors Three switches/sensors (consult sales office) Four switches/sensors (consult sales office) Conduit entries supplied Two entries standard Four entries (consult sales office) Unit specification Dz DV FN tandard build- M conduit entries ¾ NPT conduit entries M conduit entries ½ NPT conduit entries Non-standard material (consult sales office) Certification I TEX IECEx Other options (consult sales office) Revision R Internal revision # 9 BY N R1 = Model number 9BYN-R1 pecifying your position monitor pecifying a position monitor is a complex process as there are many variables which affect each individual application. To ensure that you receive the best possible combination for your monitoring requirement, please contact your local sales office for advice and guidance from one of our experts. Hazardous area classification Please see our data sheet for further information on the global standards affecting the specification and installation of equipment in hazardous areas. U/Canada: addle Brook, NJ Ph: Fax: westlockinfo@westlockcontrols.com outh merica: ao Paulo, Brazil Ph: Fax: comercial@westlock.com.br Europe: Kent, England Ph: Fax: sales@westlockuk.com sia: ingapore Ph: sales@westlockuk.com Page