Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
|
|
- Chloe Bailey
- 6 years ago
- Views:
Transcription
1 Load Cell F60X Bending beam load cell made of stainless steel, hermetically sealed. Approved up to 6000d R60 OIML. Level of protection IP 68. ATEX 94/9/CE version for hazardous area (option). Designed to fit with other any weighing applications, the F60 series may easily be installed in platforms, hoppers, tanks. 5kg 5t Connection + Excit. + Signal -Signal -Excit. red black blue white Technical modification to reserve Bestech Australia U14/44 Garden Blvd, Tel: Sales@bestech.com.au Dingley VIC 3172 Fax:
2 Dimensions Metrological Specifications Type Variation C1.5 3e3 C3 10e Nominal load (E) 5 kg 10 kg 20 kg 50 kg 100 kg 200 kg 300 kg 500 kg 0,5 t 1 t 2 t 5 t Accuracy class C1.5 C3 Max. numbers of load cell intervals (nm a x ) Minimal verification interval (vm i n ) Max. load for approved weighing (Em a x ) Combined error d. OIML kg E/3300 E/10000 kg 6,6 13,1 26,2 65, %E ± 0,033 ± 0,017 Creep division factor (Z = Em a x / 2 x DR) Zero balance %E ± 2,5 ± 2,5 Creep error %E ± 0,033 ± 0,025 Temp. coeff. of zero %E/ C ± 0,0042 ± 0,0014 Temp. coeff. of sensitivity %E/ C ± 0,0019 ± 0,0014 Technical modification to reserve Bestech Australia U14/44 Garden Blvd, Tel: Sales@bestech.com.au Dingley VIC 3172 Fax:
3 Specifications Type F60X Variation C6 10e Nominal load (E) 10 kg 20 kg 50 kg 100 kg 200 kg 300 kg 500 kg Accuracy class C6 Max. numbers of load cell intervals (nm a x ) d. OIML 6000 Minimal verification interval (vm i n ) Max. load for approved weighing (Em a x ) Combined error Creep division factor (Z = Em a x / 2 x DR) kg E/10000 kg 13,1 26,2 65, %E ± 0, Zero balance %E ± 2,5 creep error %E ± 0,012 Temp. coeff. of zero %E/ C ± 0,0014 Temp. coeff. of sensitivity %E/ C ± 0,0007 Electrical Specifications Variation C1.5 3e3 C3 10e C6 10e Nominal range of excitation voltage V Nominal sensitivity mv/v 2 ± 1% Input resistance : 385 ± 20 Output resistance : 350 ± 5 Specifications Service load % Em ax 150 Limit load % Em a x 200 Service temperature range C Nominal temperature range C Tighten torque Nm 25 (~ 500 kg); 100 (~ 0,5 t ~ 2 t); 200 (= 5 t) Level of protection EN IP68 Insulation resistance G: / 50V 5 Material Rostbest. Edelstahl - Stainless steel Length of wire m 3 (~ 500kg); 5 (~ 0,5t) Net weight kg 0,45 (~ 500 kg); 0,9 (~ 0,5 t ~ 2 t); 2 (= 5 t) Options ATEX 94/9/CE Accessories Loading foot type LFC Mounting kit STABIFLEX-F II 2 G/D, Ex ia I I 2 D, Ex td II 3 G, Ex na Technical modification to reserve IIC T6, Ex iad A21, T80 C Ta<+60 C (zone 1/21) A21, IP6X T80 C, Ta<+60 C (zone 21) IIC T6, Ex nl IIC T6, Ta<+60 C (zone 2 ) Bestech Australia U14/44 Garden Blvd, Tel: Sales@bestech.com.au Dingley VIC 3172 Fax:
4 Dimentions STABIFLEX-F Technical modification to reserve Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
5 Load cell Low profile shear beam load cell made of stainless steel. Approved up to 3000d OIML R60. Extremely flat design. ATEX 94/9/EC version for hazardous area (option). Calibrated signal output, for multi-load cells mounting. Level of protection IP 67 SB30X 500 kg 2t Supply (+) Signal (+) Signal (-) Supply (-) Connection red black blue white Technical modification to reserve
6 Dimentions SB30X Specifications Type SB30X
7 Load Cell 300 kg... 2 t Low profile shear beam load cell made of stainless steel hermetically sealed (IP68 protection). Approved up to 6000d R60 OIML and up to 5000d NTEP. With an extremely compact design, the SK30X series has been specially constructed for low profile industrial platform scales as well as pallet weighing applications. Calibrated signal output, for multi-load cells mounting. Mounting hardware available on request : Articulated foot LFA for platform scales, STABIFLEX kit or ISOFLEX for silos, hoppers, tanks weighing Version for hazardous area approved to EEx ia IIC T6 (option). Supply (+) Signal (+) Signal (-) Supply (-) Sense (+) Sense (-) Connection brown yellow white green grey pink
8 Dimensions SK30X Dimensions STABIFLEX-SK
9 Dimensions ISOFLEX Specifications Variation C3 10e C6 15e Nominal load (E) kg 300; 500; 1000; 500; 1000; Accuracy class OIML R60 C3 C6 Max. numbers of load cel intervals d.oiml (nmax) Min. verification interval v ( m i n ) kg E m a x / E m a x / Max. load for approved weighing (Emax) kg 300; 500; 1000; 500; 1000; Combined error % E ± 0,017 ± 0,008 Creep division factor ( Z = Emax / 2 x DR ) Zero balance % E ±10 Creep error (30 min) % E ± 0,024 ± 0,012 Temp. coeff. of zero % E/ C ± 0,0014 ± 0,0009 Temp. coeff. of sensitivity % E/ C ± 0,0014 ± 0,0007 Nominal range of excitation voltage V Nominal sensitivity mv/v 2 Signal adjustment % E ± 0,1 Input / Output resistance : 385 ± 20 / 350 ± 5 Service load % Em a x 150 Limit load % E 200 m a x Service temp. range C Nominal temp. range C Tighten torque Nm 20 Level of protection EN IP 68 Insulation resistance G:/50V 5 Material Stainless steel Length of wire m 5 Net weight kg 0,9 Options NTEP d NTEP 5000 ATEX 94/9/EC II 2 G/D, Ex ia IIC T6, Ex iad A21, T80 C Ta<+60 C (zone 1/21) I I 2 D, Ex td A21, IP6X T80 C, Ta<+60 C (zone 21) II 3 G, Ex na IIC T6, Ex nl IIC T6, Ta<+60 C (zone 2 ) Accessories Loading foot type LFA Mounting kit STABIFLEX SK Mounting kit ISOFLEX
10 Load Cell SK30X-5t 3t 5t Low Profile shear beam load cell made of stainless steel hermetically sealed (IP68 protection). Approved up to 4000d R60 OIML. With an extremely compact design, the SK30X series has been specially constructed for low profile industrial platform scales as well as pallet weighing applications. Calibrated signal output, for multi-load cells mounting. Mounting hardware available on request: Articulated foot LFC for platform scales, STABIFLEX kit for silos, hoppers, tanks weighning.. Version for hazardous area approved to EEx ia IIC T6 (option). Supply (+) Signal (+) Signal (-) Supply (-) Sense (+) Sense (-) Connection brown yellow white green grey pink Technical modification to reserve
11 Dimensions SK30K-5t Dimensions STABIFLEX-SK
12 Specifications Type Variation C3 10e Nominal load (E) kg 3000; 5000 Accuracy class OIML R60 C3 Max. numbers of load cell d.oiml 3000 intervals n ( m a x ) Min. verification interval v ( m i n ) kg E m a x / Max. load for approved weighing E ( max) kg 3000; 5000 Combined error % E ± 0,017 Creep division factor ( Z = E max / 2 x DR ) 3000 Zero balance % E ±10 Creep error (30 min) % E ± 0,024 Temp. coef. of zero % E/ C ± 0,0014 Temp. coef. of sensitivity % E/ C ± 0,0014 Nominal range of excitation V voltage Nominal sensitivity mv/v 2 Signal adjustment % E ± 0,1 Input / Output resistance : 385 ± 20 / 350 ± 5 Service load % Em a x 150 Limit load % E 200 m a x Service temp. range C Nominal temp. range C Tighten torque Nm 80 Level of protection EN IP 68 Insulation resistance G:/50V 5 Material Rostbest. Edelstahl - Stainless steel Length of wire m 5 Net weight Options kg 1,75 SK30X-5t ATEX 94/9/EC II 2 G/D, Ex ia IIC T6, Ex iad A21, T80 C Ta<+60 C (zone 1/21) I I 2 D, Ex td A21, IP6X T80 C, Ta<+60 C (zone 21) II 3 G, Ex na IIC T6, Ex nl IIC T6, Ta<+60 C (zone 2) Version C4 d.oiml 4000 Accessories Loading foot type LFC Mounting kit STABIFLEX SK Technical modification to reserve
13 Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
14 Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
15 Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
16 Features High Measuring Accuracy Suitable for Medium Load Measurement Compact and Rugged Model Stainless Steel or Steel Alloy Material Welded Sealing Description MLB21 series with steel alloy or stainless steel material is a rugged and accurate load cell suitable for tension-compression load measurement. This shear beam load cell offers great flexibility and reliability for a wide range of applications with highly competitive pricing. MLB21 is available in standard ranges from 5kg to 500kg with an output of mv/v. The standard Precision is 0.02% FS. The robust construction of MLB21 with its high performance makes it ideal for demanding long term applications. Applications Electronic scales Bin and hopper weighing systems Mechanical scale conversion Hanging Scales OEM scale construction Level and inventory measurement Technical Specifications Capacity: 5, 10, 20, 30, 50, 100, 200, 300, 350, 500kg or other ranges Output: 2.0 ± 0.002mV/V Precision: 0.02% FS (combined LRH error) Creep: ±0.02% FS / 30min Overload rating: 150% FS Excitation: 9 to 12 VDC Zero unbalance: ±1% FS Protection Level: IP67, with cable connection Compensated temp. range: -10 to 40 C Operating temp. range: -20 to +55 C Temp. coefficient of zero: 0.02% FS /10 C Temp. coefficient of span: 0.014% FS /10 C Input resistance: 350±5Ω Output resistance: 350±3Ω Insulation resistance: 50VDC Electrical connection: 4-cored shield cable, φ=5mm and length=3m or others Dimensions Wiring Capacity H d D kg kg Note: All specifications are subject to change without prior notice Ver /06 Bestech Australia Distributor of Measure X
17 Features High Measuring Accuracy Suitable for Medium and High Load Measurement Compact and Rugged Model Nickel coated Steel Alloy Material Silicon Rubber Sealing Description MLB22 series with steel alloy or stainless steel material is a rugged and accurate load cell suitable for tension-compression load measurement. This shear beam load cell offers great flexibility and reliability for a wide range of applications with highly competitive pricing. MLB22 is available in standard ranges from 0.5t to 25t with an output of mv/v. The standard Precision is 0.02% FS. The robust construction of MLB22 with its high performance makes it ideal for demanding long term applications. Applications Hanging Scales Bin and hopper weighing systems Mechanical scale conversion OEM scale construction Level and inventory measurement Electronic scales Technical Specifications Capacity: 0.5, 1, 2, 2.5, 3, 5, 10, 15, 20, 25t or other ranges Output: 2.0 ± 0.002mV/V Precision: 0.02% FS (combined LRH error), optional OIML C3 Creep: ±0.02% FS / 30min Overload rating: 120% FS Excitation: 5 to 12 VDC Zero unbalance: ±1.5% FS Protection Level: IP67, with cable connection Compensated temp. range: -10 to 45 C Operating temp. range: -30 to +65 C Temp. coefficient of zero: 0.011% FS /10 C Temp. coefficient of span: 0.019% FS /10 C Input resistance: 350±3.5Ω Output resistance: 351±2Ω Insulation resistance: 50VDC Electrical connection: 4-cored shield cable, φ=6.2mm and length=4m or others Bestech Australia Distributor of Measure X
18 Dimensions Capacity W L L1 L2 L3 L4 H H1 H2 H3 D d 0.5t t t t t t t t t t Connection Diagrams Note: All specifications are subject to change without prior notice Ver /06 Bestech Australia Distributor of Measure X
19 Features High Measuring Accuracy Suitable for Medium and High Load Measurement Compact and Rugged Model Nickel Coated Steel Alloy Material Silicon Rubber Sealing Description MLB23 series with nickel plated steel alloy material is a rugged and accurate load cell suitable for tension-compression load measurement. This shear beam load cell offers great flexibility and reliability for a wide range of applications with highly competitive pricing. MLB23 is available in standard ranges from 0.25t to 10t with an output of mv/v. The standard Precision is 0.02% FS. The robust construction of MLB23 with its high performance makes it ideal for demanding long term applications. Applications Electronic scales Bin and hopper weighing systems Mechanical scale conversion Hanging Scales OEM scale construction Level and inventory measurement Technical Specifications Capacity: 0.25, 0.5, 1, 1.5, 2, 2.5, 3, 5, 10t or other ranges Output: 3.0 ± 0.02mV/V Precision: 0.02% FS (combined LRH error), optional OIML C3 Creep: ±0.02% FS / 30min Overload rating: 150% FS Excitation: 5 to 15 VDC Zero unbalance: ±1% FS Protection Level: IP67, with cable connection Compensated temp. range: -10 to 55 C Operating temp. range: -30 to +80 C Temp. coefficient of zero: 0.03% FS /10 C Temp. coefficient of span: 0.016% FS /10 C Input resistance: 365±5Ω Output resistance: 350±3Ω Insulation resistance: 50VDC Electrical connection: 4-cored shield cable, φ=5.7mm and length=3.5m or others Dimensions Wiring Capacity H W D L1 L2 L3 L4 L5 H1 M 0.25t - 2t M12x t 3t M12x1.75 5t 10t M16x1.5 Note: All specifications are subject to change without prior notice Ver /06 Bestech Australia Distributor of Measure X
20 Features High Measuring Accuracy Suitable for Medium Load Measurement Compact and Rugged Model Steel Alloy Material with Nickel Coat Silicon Rubber Seal Description MLB24 series with Steel alloy material is a rugged and accurate load cell suitable for tension-compression load measurement. This single ended shear beam load cell offers great flexibility and reliability for a wide range of applications with highly competitive pricing. Installation of this load cell is easy and it is water and oil-proof. MLB24 is available in standard ranges from 250kg to 5,000kg with an output of mv/v. The standard Precision is 0.02% FS. The robust construction of MLB24 with its high performance makes it ideal for demanding long term applications. Applications Electronic scales Bin and hopper weighing systems Mechanical scale conversion Tension force measurement Hanging Scales OEM scale construction Level and inventory measurement Technical Specifications Capacity: 250, 500, 1000, 2000 and 5000kg or other ranges Output signals: 2.0 ± 0.002mV/V Precision: 0.02% FS (combined LRH error) Creep: ±0.02% FS / 30min Overload rating: 120% FS Excitation voltage: 5 to 12 VDC Zero unbalance: ±1.5% FS Protection Level: IP65, with cable connection Compensated temp. range: -10 to 40 C Operating temp. range: -35 to +65 C Temp. coefficient of zero: 0.011% FS /10 C Temp. coefficient of span: 0.019% FS /10 C Insulation resistance: 50VDC Input resistance: 350±3.5Ω Output resistance: 351±2Ω Electrical connection: 4-cored shield cable, φ=5mm and length=4m and others Bestech Australia Distributor of Measure X
21 Dimensions Capacity L L1 L2 L3 L4 H H1 H2 w d D M 250kg M12 500kg M kg M kg M kg M20 Connection Diagram Note: All specifications are subject to change without prior notice Ver /06 Bestech Australia Distributor of Measure X
Bestech Australia U14/44 Garden Blvd, Tel: Dingley VIC 3172 Fax:
Load Cell F60X Bending beam load cell made of stainless steel, hermetically sealed. Approved up to 6000d R60 OIML. Level of protection IP 68. ATEX 94/9/CE version for hazardous area (option). Designed
More informationBestech Australia U14/44 Garden Blvd, Tel: Dinely VIC 3172 Fax:
Load cell 50... 500 kg High capacity single point load cell made of aluminum. EEC approvals in 3000 d according to OIML R60 and up to 5000 d NTEP. Designed to fit with single point platforms of maximum
More informationType PB Load Cell. Approvals OIML approval to C3 (Y = 7 500; Y = for 375 kg capacity)
Type PB Load Cell IP65 Product Description The type PB is a very low profile planar beam load cell. Its unique Flintec design allows for an extremely low scale construction. Using 3 or 4 type PB load cells
More informationABB ME ASURE ME NT & AN AL YT ICS D AT A SHE ET. 9QGPS2000S Hermetically sealed bending beam load cell
BB ME SURE ME NT & N L YT ICS D T SHE ET 9QGPS2000S Hermetically sealed bending beam load cell 2 Measurement made easy High-end load cell combining high accuracy with high resistance in harsh environment.
More informationWeighing Instruments. Applications. Characteristics. DMS strain gauges (load cells), DMS amplifier
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Weighing System Evaluation Mounting DMS strain gauges (load cells), DMS amplifier
More informationLoad cell. Special features. Data sheet
Z6R Load cell Special features - Nominal (rated) loads: 20 kg 200 kg - Welded-on robust cover - Load cells made of rust-resistant materials - Easy to clean - Same dimensions like Z6F - Verifiable up to
More informationLoad Cells Page Option Option
Content: Load Cells Page Option Option Dynamometer, V-LINK 1 Wireless Remote Display, V-LINK 2 Mechanical Overload Switch 3 Static Line Tensiometer 4 Heavy Duty Tensiometer 5 ATEX Running Line Tensiometer
More informationA shear beam load cell, with strain gauges, tested as a part of a weighing instrument. Manufacturer : Precia Molen Type : CSI.
Test certificate Page 1 of 4 Issued by Hugo de Grootplein 1 3314 EG Dordrecht The Netherlands Notified Body Number 0122 In accordance with Applicant In respect of Paragraph 8.1 of the European Standard
More informationModel 3A Series 3-Axis Load Cell
Model 3A Series 3-Axis Load Cell 3-Axis Fx Fy Fz; Independent Bridges 20N to 500kN Force Range Compact Size Low Crosstalk Temperature Compensated Accessories Model 3A60A BSC4A 4-Channel Analog Amplifier
More informationModel 3A Series 3-Axis Load Cell
Model 3A Series 3-Axis Load Cell 3-Axis Fx Fy Fz; Independent Bridges 20N to 500kN Force Range Compact Size Low Crosstalk Temperature Compensated Accessories BSC4A 4-Channel Analog Amplifier BSC4D 4-Channel
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationSingle point load cell
PW15AH Single point load cell Special features - Nominal load 10 kg... 100 kg - Stainless steel - High ratio of minimum verification interval Y - Industrial Footprint (SP4M) - Degree of Protection IP68;
More informationLoad Cells Page Option Option
Content: Load Cells Page Option Option Dynamometer, V-LINK 1 Wireless Remote Display, V-LINK 2 Mechanical Overload Switch 3 Static Line Tensiometer 4 Heavy Duty Tensiometer 5 ATEX Running Line Tensiometer
More informationK3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.
K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and
More informationWeighing Instruments
GHM Messtechnik GmbH Sales Center International Schloßstraße 6 88453 Erolzheim Germany Fon +49-7354-937233-0 Fax -88 www.ghm-messtechnik.de info@ghm-messtechnik.de Weighing Instruments System Evaluation
More information100/200/400 t. Self-centering pendulum lead cells. Data sheet. Special features
C16A 100/200/400 t Self-centering pendulum lead cells Special features - Self restoring function - Nominal (rated) loads: 100 t, 200t and 400t - Simple installation - Rust resistant materials, laser welded,
More informationForce and weight measuring instruments
JJ Force sensors and load cells JJ Measurement amplifiers JJ Mechanical and electronic accessories JJ Combination units JJ Force calibration systems Force and weight measuring instruments DS_Force_and_weight_measuring_instruments
More informationLOAD CELLS AND WEIGHING SOLUTIONS
LOAD CELLS AND WEIGHING SOLUTIONS SINGLE POINTS S - BEAMS SINGLE ENDED BEAMS DOUBLE ENDED BEAMS CANISTERS & DISCS PLANAR BEAMS LOAD BUTTONS WEIGH MODULES DIGITAL LOAD CELLS SCALES DIGITAL INDICATORS ELECTRONICS
More informationPW6C. Single point load cells. Special features. Data sheet
PW6C Single point load cells Special features - Max. capacities: kg... 40 kg - Aluminum - Accuracy class CMR & C6 - Off center load compensated - Shielded connection cable - Different cable lengths and
More informationIntrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic pressure measurement Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA data sheet PE
More informationSENEL TECHNOLOGIES S.A. Load Cells Electronic Indicators
2009 Load Cells Electronic Indicators Presentation Technologies S.A., is a company that has been created to provide solutions in the field of load cells and weighing electronics, it offers the best solutions
More informationPrecision Junction Boxes
Precision Junction Boxes Accuracy and Stability All components are designed for high accuracy and long term stability. Precision SMT resistors and gold plated switches guarantee trouble free operation.
More informationConnection. Input EEx ia IIC. Sense. Fine tuning adjustment. Fine tuning amplifying. Amplifying. Adjustment. Output. Composition
Converter Connection 1-channel EEx ia IIC for 4-wire and 6-wire bridges Analogue output 0/4 ma... 20 ma or 4mA...-12mA Full bridge load cells and strain gauges circuit for resistance bridges up to 17 Ω
More informationIntrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F,
More informationPrecision Junction Boxes
Precision Junction Boxes Accuracy and Stability All components are designed for high accuracy and long term stability. Precision SMT resistors and gold plated switches guarantee trouble free operation.
More informationU10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]
U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of
More informationTechnical data Model F1301 F13C1 ATEX/IECEX 2) F13C1 (Option) Nominal load F nom 10 / 20 / 30 / 50 / 100 / 200 kn 10 / 20 / 30 / 50 / 100 / 200 kn 10
Compression force transducer with Thin-film sensor Accuracy: 1 % Output signal: 4...20 ma; 2-wire, 0...10 VDC; 3-wire Optional Optional ATEX/IECEX II 2G Ex ib IIC T4/T3 for SIL3-Applications with 2-channel
More informationDS 400 DS 400. Intelligent Electronic Pressure Switch Completely in Stainless Steel. piezoresistive stainless steel sensor
GmbH Postal address: House address Fon (+49) 0 22 42-870-0 Postbox 26 Löhestr. 7 Fax (+49) 0 22 42-870-20 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de Data Sheet Page /5 Intelligent
More informationData Sheet. Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar. Special features
P3 Top Class P3MB version with fixed cable P3MBP version with plug connection TEDS: Transducer Electronic Data Sheet P3 Absolute pressure transducer Nominal (rated) pressure 10 bar to 3000 bar Special
More informationTransducer transmitter BILT 4 II 2(1) G. Technical Manual
GB Transducer transmitter BILT 4 II 2(1) G Technical Manual Transducer transmitter BILT 4 Contents Introduction General... 3 Ex.safety description... 4 Technical data... 5 Installation General... 6 Mechanical
More informationService Manual. Hazardous platforms approval Version 1.0
Service Manual Hazardous platforms approval Version 1.0 Service XXL Congratulations on choosing the quality and precision of METTLER TOLEDO. Proper use according to these instructions and regular calibration
More informationZ6... Data Sheet. Load cell. Special features. Dimensions (in mm; 1 mm = inches) B en 1
Z6... Load cell ata Sheet Special features - Welded on metal bellows - Nominal (rated) loads: 5 kg 1 t - Load cells and installation aids made of rust resistant materials - Verifiable up to 6000 parts,
More informationIntrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic pressure measurement Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA data sheet PE
More informationMODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With
Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE
More informationRSCC. Data Sheet. Load cells. Special features. Diagram of RSCC load cell. Design: 500 kg to 5 t. Design: 50 kg to 200 kg. B
RSCC Load cells Data Sheet Special features - Load cell with SG measurement system - aximum capacities: 50 kg to 5 t - Hermetically sealed (IP68) - Rust resistant materials - Legal for trade to 3000 divisions,
More informationUltra high purity transducer, Ex na nl Models WU-20, WU-25 and WU-26
Electronic pressure measurement Ultra high purity transducer, Ex na nl Models WU-20, WU-25 and WU-26 WIKA data sheet PE 87.07 Applications Gas panels for OEM tools Semiconductor, flat panel display and
More informationData sheet. P3 Top Class BlueLine. P3MBP BlueLine. Ultra-high pressure transducers to 15,000 bar. Special features
Ultra-high pressure transducers to 1,000 bar Data sheet Special features P Top Class BlueLine PMBP BlueLine - For static and dynamic pressure variance, pressure peaks and pressure fluctuations - Principle
More informationZ6... Data sheet. Load cell. Special features. Dimensions (in mm; 1 mm = inches) B en HBM: public 1
Z6... Load cell ata sheet Special features Welded-on metal bellows (rated) loads: 5 kg 1 t Load cells and installation aids made of rust-resistant materials Verifiable up to 6000 divisions, test report
More informationFC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable
More informationModels Tension/Compression Pancake Load Cell Model 3174 with tension base DESCRIPTION FEATURES
Models 3174-3176 Model 3174 Model 3174 with tension base DESCRIPTION Models 3174, 3175, and 3176 are fatigue-resistant, low-profile tension and compression load cells that are well suited to materials
More informationMJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400
Data Sheet MJK Expert 700 / 800 / 900 / 1100 / 2100 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile We reserve the right to continuously improve our products and make any change in
More informationIP26 Series Current to Pneumatic Converter
Product Specifications 06.2016 PSS EVE0403 A-(en) IP26 Series Current to Pneumatic Converter The IP26 (current to pressure) transducer converts a 4 20mA electrical current signal to a proportional linear
More informationK3R110 ±50N; ±100N, ±200N; ±500N, ±1000N, ±2000N; ±5000N
K3R110 ±50N; ±100N, ±200N; Description The force sensor K3R110 is suitable for inspection tasks in quality assurance as well as in materials testing because of its compact design. This precision force
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationAssembly 249 (9.80) 259 (10.2) Example: level probe with Pt100 and HUT temperature head transmitter ( ma) ma. Core colors: RD BK YE BU
Level probe Features Assembly Device for hydrostatic pressure measurement in liquids High resistance to overload High-precision, robust ceramic measuring cell with longterm stability Simultaneous level
More informationU15. Force transducer. Special features. Data sheet. Installed dimensions of connection variants
U15 Force transducer Special features - Tensile/compressive force transducer - Nominal (rated) forces 2.5 kn to 2.5 MN - lass 0.5 to ISO 376 in force measurement range between 10% and 100% of the nominal
More informationShear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1
Force Shear beam With thin-film technology from 2 kn Models F3301, F33C1, F33S1 Rated force From 0...2 kn Applications Industrial weighing technology Machine building and plant construction, manufacturing
More informationLoad Cells Shear beam load cells SIWAREX WL230 SB-S SA
oad cell Overview Combined error comb Repeatability v ±0.0% C n ±0.0% C n The shear beam load cell is particularly suitable for implementation in container, overhead rail conveyor and platform scales.
More informationCONTENTS LOAD CELLS / FORCE TRANSDUCERS TR CM CU AM TC TU TH CC CT SB SH CB OC OD CIR CIR-D
CONTENTS LOAD CELLS / FORCE TRANSDUCERS TR CM CU AM TC TU TH CC CT SB SH CB OC OD CIR CIR-D 3 TR FORCE TRANSDUCER FOR MEASURING THE TENSION ON FIXED OR ROTATING SPINDLES Main features Range of measurement:
More informationModel LBS Miniature Compression Load Button
Model LBS Miniature Compression Load Button Why the Interface model LBS Miniature Compression Load Button is the best in class: Temperature compensated Integral load button Small diameter From." height
More informationU2B. Force Transducer. Special features. Data sheet
U2B Force Transducer Special features - Tensile/compressive force transducer - Non rusting, degree of protection IP67 - Can be configured with different cable lengths, plug fitting and TEDS on request
More informationResistance Thermometers Model Series TR7X0, Sheathed Design
Electrical Temperature Measurement Resistance Thermometers Model Series TR7X0, Sheathed Design WIKA Data Sheet TE 60.40 Applications T Suitable for all industrial and laboratory applications Special Features
More informationU2B. Data sheet. Force Transducer. Special features. B en
U2B Force Transducer Special features Data sheet Tensile/compressive force transducer Non-rusting, degree of protection IP67 Can be configured with different cable lengths, plug fitting and TEDS on request
More informationKFS. Flap-type flow meter. Design and range of application
Design and range of application The measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is
More informationProcess transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm
Electronic pressure measurement Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm WIKA data sheet PE 86.05 Applications Process technology Machine building and plant
More informationU9C. Data sheet. Force Transducer. Special features. B en
U9C Force Transducer Data sheet Special features Tensile/compressive force transducer Accuracy class 0.2 Nominal (rated) forces 50 N 50 KN Non-rusting, protection class IP67 Configurable with different
More informationLoad cell system fault finding guide (Application Note: Number AN1)
Load cell system fault finding guide (Application Note: Number AN1) Table of Contents Basic checks 3 Basic load cell system............................ 3 Basic load cell resistance checks......................
More informationForce and weight measuring instruments
JJ Force sensors and load cells JJ Hanging scales JJ Sensors for proof load testing JJ Water filled bags Force and weight measuring instruments DS_Force_and_weight_measuring_instruments 05/2016 97 Force
More informationSubmersible pressure sensor For water and wastewater Model LW-1
Replacement product: Model LF-1 Level measurement Submersible pressure sensor For water and wastewater Model LW-1 WIKA data sheet LM 40.03 Applications Level measurement in rivers and lakes Deep well and
More informationCable Glands, Metal, for shielded EMC Cables CG.EM.*.*.*
Features Assembly Cable gland series for shielded EMC cables Brass nickel-plated or stainless steel AISI 316 Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex d, Ex e and Ex tb Metric and NPT
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 WIKA data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationTension/compression force transducer. With thin film technology up to 100 kn. Models F2301, F23C1, F23S1. Force. Applications.
Force Tension/compression force transducer With thin film technology up to 100 kn Models F2301, F23C1, F23S1 tecsis data sheet FO 51.17 Applications Crane systems and hoists Industrial weighing technology
More informationSubmersible pressure sensor For oils and fuels Model LF-1
Level measurement Submersible pressure sensor For oils and fuels Model LF-1 WIKA data sheet LM 40.04 Applications Level measurement in vessel and storage systems for oils and fuels Overfilling and dry-run
More informationIntrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments WIKA Data Sheet PE 81.51 Applications
More informationIntrinsically safe pressure transmitter MBS 4201, MBS 4251, MBS 4701 and MBS 4751
Data sheet Intrinsically safe pressure transmitter MBS 420, MBS 425, MBS 470 and MBS 475 The intrinsically safe pressure transmitter program is designed for use in hazardous environments and offers a reliable
More informationPaine Series Pressure Transducer
Product Data Sheet March 2017 211-50-070, Rev M Paine 211-50-070 Series Pressure Transducer mv/v, Downhole, HP/HT, +260 C, Ranges to 30,000 PSIA (2068 BAR) The 211-50-070 Series is our rugged High Pressure/High
More informationMiniature resistance thermometer Explosion-protected version Model TR34, thread-mounted
Electrical temperature measurement Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted WIKA data sheet TE 60.34 Applications Machine building, plant and vessel construction
More informationTPFADA FLUSH DIAPHRAGM PRESSURE TRANSMITTER WITH DIGITAL AUTOZERO & SPAN
TECHNICAL DATA TPFADA FLUSH DIAPHRAGM PRESSURE TRANSMITTER WITH DIGITAL AUTOZERO & SPAN Main features Ranges: from 0...10 to 0...1000 bar Output signal 4...0mA -wires / 0.1...5.1Vdc / 0.1...10.1Vdc / 0...5Vdc
More informationExpert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters
Expert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters ll 2G EEx ia llc T6 As our products are continuously improved, we reserve the right to make any change in the stated specifications
More informationAcceleration Sensor AS - 022
1 Application Acceleration Sensor AS - 022 The acceleration sensor AS-022 is used for measurement of vibration acceleration. Fig. 1 Acceleration Sensor AS - 022 2 Measuring Principle 3 Technical Data Acceleration
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationHigh Temperature Velocity and Acceleration Sensor
359 High Temperature Velocity and Acceleration Sensor Bently Nevada* Asset Condition Monitoring Description The 359 High Temperature Velocity and Acceleration Sensor (HTVAS) provides a continuous acceleration
More informationLoad pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1
Force Load pin With thin-film technology up to 70 kn Models F5301, F53C1, F53S1 WIKA data sheet FO 51.18 Applications Crane systems and hoists Industrial weighing technology Machine building and plant
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection Fixed setting EC-Type Examination Certificate TÜV99 ATEX 1479X Usable up
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationC9C. Force Transducer. Special features. Data sheet
C9C Force Transducer Special features - Compact design compressive force transducer - Accuracy class 0.2 - Nominal (rated) forces 50 N to 50 kn - Configurable with different cable lengths, plug assembly
More informationCE620. Piezoelectric accelerometer with integrated electronics. IECEx
Piezoelectric accelerometer with integrated electronics FEATURES» From the Vibro-Meter product line» Voltage output signal: 100 or 500 mv/ g» Frequency response: 2 Hz to 10 khz» Temperature range: 55 to
More informationRelative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 The compact type 528 pressure transmitter is based upon the Huba Control developed and since over 20 years well proven ceramic technology. These transmitters
More informationLocal control stations for Zone 1 and Zone 21. Features. Description
Local control stations for Zone and Zone Local control stations for Zone and Zone Features The right size/material enclosure Optimum functionality thanks to the great variety of components Customised planning
More informationTEK-TEMP 2100A. Explosion-Proof Temperature Transmitter. TEMPERATURE. Technology Solutions
Technology Solutions TEK-TEMP 2100A Explosion-Proof Temperature Transmitter TEMPERATURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Explosion-Proof
More informationT11 - T12 - T13. Electrical contacts stainless steel thermometers. Specifications (20 C) Ø Ø Ø 160 mm
Electrical contacts stainless steel thermometers T11 - T12 - T13 Ø - Ø 1 - Ø 160 mm Derived from the TX thermometers of nominal diameter, 1 and 160, of which they possess all the characteristics, the T11,
More informationED701 General Industry Pressure Transmitter
ED701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationCSG110 Strain Gauge Universal Amplifier
Quick Start Guide CSG110 Strain Gauge Universal Amplifier Sensor Solutions Source Load Torque Pressure Multi-Axis Calibration Instruments Software www.futek.com Getting Help TECHNICAL SUPPORT For more
More informationXPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
More informationNivotester FTR325. Technical Information. 1-channel switch amplifier for the Soliwave M microwave barrier
Technical Information Nivotester FTR325 1-channel switch amplifier for the Soliwave M microwave barrier Area of application The Nivotester FTR325 is suitable as a 1-channel switch amplifier for the Soliwave
More informationELPF Load Cell DESCRIPTION
Compact Tension/Compression Design 10 500 lbf High Level and mv Output High Stability Industry Standard Packing Resists Off Axis Load Components Full NIST Traceable 11 Point Calibration Shielded Teflon
More informationIndustrial Ethernet OPT cable manufactured for Petrol Forecourt Applications.
Industrial Ethernet Petrol Forecourt Cable (Solid) 3014P24S1001 Industrial Ethernet Petrol Forecourt Cable (Solid) 3014P24S1001-10 Industrial Ethernet OPT cable manufactured for Petrol Forecourt Applications.
More informationHan High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
More informationSubmersible pressure sensor For superior applications Model LF-1
Level Submersible pressure sensor For superior applications Model LF-1 WIKA data sheet LM 40.04 Applications Level measurement in vessel and storage systems Overfilling and no-load operation monitoring
More informationMiniature pressure sensor
SPECIFICATIONS Ranges 0.5 to 350 bar [7 psi to 5 000 psi] Absolute, sealed and gauge Titanium construction For static and dynamic applications Linearity up to ±0.25% FS The XP5 serie is designed in titanium
More informationMANUAL HYDROBAR. Manufactured by: Fax: H/US/Hydrobar/ /00 Klay Instruments Page 1
MANUAL HYDROBAR WARNING Before installing the Hydrobar, read the warnings and advisements on the last page for personal and system safety, and for optimum performance, make sure you thoroughly understand
More informationResistance thermometer Model TR30, compact design
Electrical temperature measurement Resistance thermometer Model TR30, compact design WIKA data sheet TE 60.30 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More informationModel 41E. Precision Low Profile Load Cell DESCRIPTION FEATURES
Precision Low Profile Load Cell DESCRIPTION Model 41E is a low profile pancake type load cells. These bonded foil, strain gage load cells are engineered to measure loads from 20 N to 200 kn. The tension/
More information4-20 ma Vibration Transmitter, Top connector
4-20 ma Vibration Transmitter, Top connector Main Characteristics Atex Approved for zone 0, 1, 2. Can monitor machine as low as 180 RPM. Annular shear mode (better than obsolete compression design) Velocity
More informationA Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
More informationOEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 further approvals see page 10 Applications Machine building, plant
More informationSensors for Small Forces
Force Sensors for Small Forces 0,5... 0,5 N to 500... 500 N Type 9203, 9205, 9207, 9215A, 9217A These slim sensors are designed for dynamic and quasistatic tensile and compression forces. Depending on
More informationRHE12. Hazardous Area Coriolis Mass Flow Transmitter. Features. Applications. Benefits
RHE12 Hazardous Area Coriolis Mass Flow Transmitter Features Field mounting Compact, pressure safe housing ATEX and CSA approvals for installation in hazardous areas 24 VDC power supply Configurable analog
More informationResistance thermometer Model TR30, compact design
Electrical temperature measurement Resistance thermometer Model TR30, compact design WIKA data sheet TE 60.30 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More information