SMP Interconnect Series

Size: px

Start display at page:

Download "SMP Interconnect Series"

Merry Amy Scott
5 years ago
Views:

SMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies launched the SMP push-on connector product line about two decades ago to facilitate dense packaging within RF/Microwave systems.

The SMP interconnect series relies on a floating femaleto-female adapter commonly referred to as a bullet to enable stacking of boards equipped with an SMP male PC connector.

1 SMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies launched the SMP push-on connector product line about two decades ago to facilitate dense packaging within RF/Microwave systems. The SMP interface has enabled design engineers to increase performance and complexity of their designs and improve upon their form factor. The SMP interconnect series relies on a floating femaleto-female adapter commonly referred to as a bullet to enable stacking of boards equipped with an SMP male PC connector. This durable construction and ability to tolerate radial and axial misalignment allows for a blindmate interconnect solution. SMP connectors can also withstand multiple engagement/disengagement cycles without degradation in electrical performance. The success of the SMP product line has spurred the development and commercialization of other blind-mate interconnect systems namely the SSMP, TMP and WMP to facilitate rapid assembly and testing for the gamut of Military and Commercial RF/Microwave applications. MTRILS & FINISH Metal ecu (eryllium Copper) STM 196 and/or STM 197 rass STM 36, 121, 16, 16M Stainless Steel STM 484/ 582 or 555/581 Iron-Nickel-Cobalt STM F-15 Dielectric Virgin PTF Fluorocarbon STM D 1710 and STM D 1457 Polyamide-imide STM D5204 Group 2 Class 1 Glass Finish Corning 7070 or quivalent Gold (75u in. Typ) STM-488 Type 1, Class 1.25 Nickel (100u in. Typ) Pasivation S MS-QQ-N-290 STM 967 FTURS Frequency Range: DC - 40 GHz 50 Ω Impedance; lindmateable configuration Industry standard per MIL-PRF compliant bility to withstand Radial/xial Misalignment oard-mount, Field-replaceable, ullets, Hermetic and Cable Connector configurations Custom Connectors vailable SPCIFICTIONS Parameter Impedance 50 Ω Frequency range DC - 40 GHz VSWR DC - 26 GHz: 1.15 : 1 (max) GHz: 1.40:1 (max) Insertion Loss 0.1 x f(ghz) Sea Level 500 Vrms Insulation Resistance 5000 MΩ (min) RF High Pot MHz Full Detent 15 lbs typical Force to ngage Limited Detent 7 lbs typical Smooth ore 2 lbs typical Full Detent 5 lbs typical Force to Disengage Limited Detent 3 lbs typical Smooth ore 0.5 lbs typical Radial Misalignment +/-.020 inches* xial Misalignment.010 inches Temperature range -55 C to +165 C Thermal Shock MIL-STD-202, Method 107, Cond Moisture Resistance MIL-STD-202, Method 106, except step 7b Corrosion MIL-STD-202. Method 101, Cond Vibration MIL-STD-202, Method 204, Cond D Shock MIL-STD-202, Method 213, Cond I *When mated to a Catcher s Mitt interface Carlisle Interconnect Technologies / londra lvd., Cerritos, C Toll Free / Fax / CarlisleIT.com

2 CL CONNCTORS - FOR FLXIL CLS SMP Female Straight Connector for Flexible Cables / P See tabulation for cable type(s) SMP Female Right ngle Connector for Flexible Cables, 26.5 GHz / P601 nti-rock ring nti-rock ring CL CONNCTORS - FOR SMI-RIGID & SMI-FLX CLS SMP Female Straight Connector for Semi-Rigid and Semi-Flex Cables / P651 SMP Female Float Mount Connector for Semi-Rigid and Semi-Flex Cables / P658 (Continued) (.484) (.153) (.237) (Ø.293) S PPLICL DSH(S) NUMR(S) FOR CL TYP(S) DILCTRIC HT SHRINK TUING CRLISL Ø.135 Max r.p..135 Center Conductor Dielectric Stop shrink tubing (.304) shrink tubing (2x Ø.135) (.252) (.221) FOR.093 PNL FLOT MOUNT MTL SLV (FOR -6CC) THRU -10CC ND -12CC) Heat Shrink Tubing -2CC -4CC -9CC Cable Type RG178 RG316 RD178 RD316 TLL flexible cable Cable Type FIGUR -9CC (.090) TLL CC (.122) TLL flexible cable DILCTRIC (2x Ø.135) (.300) (.252) CL TYP FIGUR UFF Ø.092-2CC TLL CC MICROFLX Ø.095-5CC Ø.085 SMI-RIGID -6CC UFF Ø.092-7CC -8CC TLL CC MICROFLX Ø.095 SMP Female Right ngle Connector for Flexible Cables, 18 GHz / P600 (.330) cap cap SMP Male Straight Panel Moount Connector for Flexible Cables / P663 SCRWDRIVR SLOT PNL FLX CL PNL.150±.003 Cable Type FIGUR Ø.047 SMI-RIGID CL.049 MIN 2-2CC Ø.085 SMI-RIGID CL.085 MIN 1 Ø.047 MICROPOROUS CL.047 MIN 2-4CC Ø.085 MICROPOROUS CL.085 MIN 1-10CC Ø.085 SMI-RIGID -11CC Ø.047 SMI-RIGID 1-12CC Ø.047 SMI-RIGID 2 (.260) (.344) SMP ML Ø.233±.001 Ø.201±.001 SMP Female Right ngle For Semi-Rigid/Semi-Flex Cables, 12 GHz / P652 (.255) (.364) (Ø.131) (.186) (11/64 56 UNRS 2) (.240) across flats.050±.001 Recommended Panel Hole Dielectric bead SMP Female Float Mount Connector for Semi-Rigid and Semi-Flex Cables / P (Ø.135) max (.211) (Ø.185) (Ø.120) nti-rock ring Ø.159 Cable Type FIGUR -9CC (.090) TLL CC (.122) TLL nti-rock ring (Ø.230) CL TYP INTRFC M17/93-RG178 CTCHR S MITT -2CC RD178 CTCHR S MITT CTCHR S MITT -4CC RD316 CTCHR S MITT -5CC (Ø.198) M17/93-RG178 (.155) (.325) LIMITD DTNT CL TYP INTRFC -7CC LIMITD DTNT -8CC RD316 LIMITD DTNT -9CC M17/93-RG178-10CC RD178-11CC center conductor carlisle shrink tubing (Ø.293) Recommended Mounting Panel (.484) (.153) (.237) Ø (.221) FOR.093 PNL Ø.283 ±.002 S PPLICL DSH(S) NUMR(S) FOR CL TYP(S) (FOR -11CC) DILCTRIC DILCTRIC (FOR -11CC) HT SHRINK TUING CRLISL CL TYP.049 MIN.047 SMI-RIGID -2CC.088 MIN.085 SMI-RIGID.049 MIN.047 MICROPOROUS -4CC.088 MIN.085 MICROPOROUS CP -6CC RD178 LIMITD DTNT -12CC RD

3 CL CONNCTORS - FOR SMI-RIGID & SMI-FLX CLS (CONT.) SMP Female Right ngle For Semi-Rigid/Semi-Flex Cables, 26.5 GHz / P655 (.186) SMP Male ulkhead Panel Mount Connector for Semi-Rigid Cables / P662 (11/64-56 UNRS-2) (Ø.198) (.375) cross Flats dielectric bead PC CONNCTORS - THROUGH HOL ORD MOUNT SMP Male PC Mount to a Straight Termination / P654 (.196) (5X C) (Ø.028) (Ø ) SMP Male Straight PC Mount - Square ody / P603 (.182) (.182) (Ø.230) (.325) (.240) center conductor (.086) ( Ø.044) ( Ø.027) (.100 TYP) 5X (.140) 5X (.140) CL TYP.049 MIN.047 SMI-RIGID -2CC.088 MIN.085 SMI-RIGID.049 MIN.047 MICROPOROUS -4CC.088 MIN.085 MICROPOROUS SMP Female Right ngle For Semi-Rigid/Semi-Flex Cables, 18 GHz / P659 Screwdiver slot PNL Installed View cable PNL.150±.003 Ø.233±.001 Ø.201± ±.001 Recommended Panel Hole (.196) (.086) (5X C) (Ø.028) ( Ø.044) Ø.031/.034 Ø.037/.039 ( Ø.027) (.100 TYP) (Ø ) Ø Ø.021 Recommended (Ø.272).150 TYP. (.200 SQ.) INTRFC FIGUR CC LIMITD DTNT (Ø.030) (Ø.068) CP (.230) (.190) CL TYP INTRFC SMOOTH OR CC CTCHR S MITT CP DILTRIC (.224) (.224) (.255) (.190) (1.5000) CL TYP Figure.049 MIN Ø.047 SMI-RIGID 1-2CC.088 MIN Ø.085 SMI-RIGID MIN Ø.047 MICROPOROUS 1 Ø.047 S/R CTCHR S MITT -2CC Ø.085 S/R CTCHR S MITT Ø.047 L/L CTCHR S MITT -4CC Ø.085 L/L CTCHR S MITT -5CC Ø.047 S/R -6CC Ø.085 S/R -7CC Ø.047 L/L -8CC Ø.085 L/L -9CC Ø.047 S/R LIMITD DTNT -10CC Ø.085 S/R LIMITD DTNT -11CC Ø.047 L/L LIMITD DTNT -12CC Ø.085 L/L LIMITD DTNT -13CC Ø.085 S/R LIMITD DTNT / CTCHR S MITT Recommended Mounting Hole Pattern INTRFC (Ø ) (C) FIGUR LIMITD DTNT.120 (.218) CC.116 (.218) SMOOTH OR.125 (.218) CC CTCHR S MITT.125 (.235) CC.116 (.218) CC LIMITD DTNT.120 (.218) CC SMOOTH OR.125 (.218) CC CTCHR S MITT.125 (.235) CC.116 (.218) CC LIMITD DTNT.120 (.218) CC SMOOTH OR.125 (.218) CC CTCHR S MITT.125 (.235) (.092) ( Ø.042) SMP Male Right ngle PC Mount / P646 ( Ø.020) (.320) (Ø.024) (.050 TYP.) (.015) (5X C) Recommended Mounting Hole Pattern INTRFC (Ø ) (C) CC (5X ) (.100 TYP.) (.120 SQ.) (.010 TYP.) ( Ø.020) Ø Ø CC.088 MIN Ø.085 MICROPOROUS 2 4 5

4 PC CONNCTORS - SURFC MOUNT SMP Male Straight to Surface Mount with Posts / P797 SMP Male Straight Surface Mount / P839 SMP Male Straight dge Mount Connector / P698 SMP Shroud Solder-in Surface Mount - Short ody / P677 (Ø.195) (.020) INTRFC LIMITD DTNT SMOOTH OR.125 SMP Male Straight Surface Mount / P703 interface per () interface per () (Ø.075) (Ø.075) (.085 TYP) ( Ø.020) (.085 TYP) (Ø.235) ( Ø.020) (Ø.078) (Ø.022).137 (Ø.179) (.179 SQ) (.095) INTRFC.116-2CC LIMITD DTNT.120 SMOOTH OR Grounded Coplanar Waveguide: Rogers (.065) (.007) (.020) (.307) (.065) (.026) (.126) (.078) (Ø.193) (.125) (.068) (CTCHRS MITT) (Ø.235) (.068) (.007) (.307) (.125) (.126) (.078) (.065) interface per.113 (Ø.075) TYP TYP.018 TYP.050 TYP.075 TYP Ø.025 Ø.180/ ±.002 TYP.054 PC CONNCTORS - DG MOUNT SMP Male Straight dge Mount Connector / P TYP Recommended PC Mounting Pattern INTRFC FIGUR (.116) 1-2CC LIMITD DTNT 1 SMOOTH OR (.125) 1-4CC CTCHR S MITT (.125) 2 interface per Ø.180/ (Ø.075) (Ø.235) Ø.012 TYP.089 R.015 TYP..046 TYP. PLTD THROUGH HOLS.0425 TYP. Ø.075 Dimensions shown are for Rogers 4350 PC Material. These dimensions may vary depending on PC material used. INTRFC () FIGUR (.116) CC LIMITD DTNT SMOOTH OR (.125) CC CTCHR S MITT (.125) X.015 THICK TS Ø WID TS (Ø.029) TPY PLTD THRU HOLS (.268).050 TYP SHROUDS - FLNG MOUNT SMP Shroud - Full Detent Straight 2-Hole Flange Mount / P670 interface per (LSS CONTCT) Ø.162 G Ø D R.015 TYP..030 TYP. Dimensions shown are for Rogers 4350 PC Material. These dimensions may vary depending on PC material used..088 Ø.075 INTRFC FIGUR (.116) 1-2CC LIMITD DTNT 1 SMOOTH OR (.125) 1-4CC CTCHR S MITT (.125) 2-5CC (.116) CC LIMITD DTNT CC SMOOTH OR (.125) CC CTCHR S MITT (.125) PC Mount Detail ( Full R.0125).200 D Recommended PC Cutout INTRFC C CC LIMITD DTNT SMOOTH OR CC CC LIMITD DTNT CC SMOOTH OR ± Ø C Ø D F G -1SF SF SF SF SF SF * SF NR NR NR SF Ø C SF SF * #0-80 UNF-2 X Ø.085 X 90 Countersunk 6 7

5 SHROUDS - FLNG MOUNT (CONT.) SMP Shroud - Thread-In / P676 (Continued) SHROUDS - FILD-RPLCL SMP Male Hermetic Shroud - Short ody / P680 (Continued) SMP Shroud - Limited Detent Straight 2-Hole Flange Mount / P672 interface per (LSS CONTCT) Ø ±.002 Ø C Ø D -1SF SF SF SF SMP Shroud - Smooth bore Straight 2-Hole Flange Mount / P Ø D () Ø C (Ø.050) SHROUDS - PRSS-IN Ø.176/.178 STRIGHT KNURL (Ø.224) (.004 X45) INTRFC FIGUR -1SF 1-2SF LIMITD DTNT 1-3SF SMOOTH OR 1-4SF CTCHR S MITT 2 SMP Press-In Shroud / P675 (1/4-48 UNS-2 THRD) (.030) SCRW DRIVR SLOT (Ø.170) (Ø.050).005 X 45 CHMR Ø.1735 ±.0010 S RQ D.100 MIN S RQ D SMP (male) 2-hole flange mount (accepts pin) / P836 Ø.164±.001 interface per () INTRFC Ø C D Ø SF -2CC -2CCSF SF -4CC -4CCSF -5CC -5CCSF -6CC -6CCSF.229± /.005 (.116) LIMITD DTNT SMOOTH OR (.125) (.116) LIMITD DTNT SMOOTH OR (.125) FML SOCKT TO CCPT Ø.012±.001 PIN Ø.124±.001 Ø C D ± ± Ø INTRFC () (C) D F G / ±.001-2CC LIMITD DTNT / ±.001 SMOOTH OR / ±.001-4CC / ±.001-5CC LIMITD DTNT / ±.001-6CC SMOOTH OR / ± CC / ± CC LIMITD DTNT / ± CC SMOOTH OR / ± CC / ± CC LIMITD DTNT / ± CC SMOOTH OR / ± CC / ± CC LIMITD DTNT / ± CC SMOOTH OR / ± CC / ± CC LIMITD DTNT / ± CC SMOOTH OR / ± CC / ± CC LIMITD DTNT / ± CC SMOOTH OR / ±.001 See detail see detail b interface per (SMOOTH OR) () (F) (.045) (Ø D) () Ø C (LSS CONTCT) -1SF -2SF INTRFC LIMITD DTNT Recommended Mounting Hole -7CC -7CCSF -8CC -8CCSF -9CC -9CCSF (.116) LIMITD DTNT SMOOTH OR (.125) ± (Ø.099) SMP Male Hermetic Shroud / P682 S DTIL & (0) () () (Ø C) (Ø D) () (F) -1SF SF SF SHROUDS - THRD-IN (.004 X45) (Ø.160) (Ø.050) SMP Shroud - Thread-In / P676 (10-48 UNS-2 THRD) (.030) SCRW DRIVR SLOT -3SF SMOOTH OR SMP Press-In Shroud - Short ody / P769 (Ø C) (D) STRIGHT KNURL () (Ø ) (Ø C) (D) -1SF P -2SF P -3SF P () (Ø ) HRMTICS (Ø.145).082 S RQ D SMP Male Hermetic Shroud - Short ody / P680 () Recommended Mounting Hole F (C) SOLDR PRFORM S RQ D Ø G (0) Ø D S RQ D (Ø.099) Ø Ø Detail Detail SQUR CUT FULL RDIUS Installation View SOLDR PRFORM Ø (.180) Recommended Mounting Hole INTRFC L DTIL CC LIMITD DTNT SMOOTH OR CC CC LIMITD DTNT CC SMOOTH OR L Ø Ø Ø Detail Detail FULL RDIUS 8 9

6 HRMTICS (CONT.) SMP Male 50 Ohm Termination / P919 SMP Female to SMP Female ullet / P617 (Continued) SMP Male to SMP Female dapter / P914 SMP Male Hermetic Thread-In with Mounting Nut / P UNS-2 THRD Ø.054 (.340) DIMOND KNURL (2 PLC S) nti-rock Ring Ø.165 Figure Ø.135 MX (Ø.135) MX per (.507) (.134) interface per (.187 HX) (.250 HX) INTRFC (.116) -2CC LIMITD DTNT SMOOTH OR (.125) SMP Male Hermetic Thread-In / P761 (.100) (.065) (.180).050 Recommended Mounting Hole (.045 WID X.050 DP) SCRWDRIVR SLOT INTRFC SF.116 SF SMOOTH OR.125 SMP Female Short / P930 MI RING (.500) (Ø.187) figure.768/ CC.850/ / CC.439/ CC.768/ figure -6CC.414/ CC.427/ CC.538/ CC.528/ SMP Female to SMP Female ullet - Short ody / P650 per (.254) Figure 3 per (.2535) (.395) CTHCHR S MITT INTRFC SF.116 SF SMOOTH OR.125 SMP Male to SMP Female Catcher s Mitt / P916 (.234) (.459) LOCKNUT (.250 HX) (#10-32 UNF-2 THRD) LOCK WSHR UNF-2 THRD (Ø.155).060 (.205) OPN/SHORTS/LODS INTRFC LIMITD DTNT -2CC (.116) SMP Female 50 Ohm Termination / P918 MI RING (.500) UNS-2 THD MJOR: Ø.1847/.1892 PITCH: Ø.1730/.1755 (Ø.187) ULLTS/DPTRS Ø.135 MX Ø.135 MX SMP Female Open / P931-1 SMP Female to SMP Female ullet / P Ø Ø.165 MI RING (.500) (2 PLC S) (2 PLC S) (Ø.187) per (.224) figure 1-2CC 2 figure 3-4CC 4 SMP Male ulkhead to SMP Male Cathcer s Mitt / P912 (10-32 UNF-2) (.242) (.058) CTHCHR S MITT per INTRFC (.100) (.235) (.569) Figure 4 (.250 HX) INTRFC SF.116 SF SMOOTH OR.125 SMP Female to SMP Female Spring Loaded ullet / P922 NON-STNDRD smp Fmale interface* NON-STNDRD smp Fmale interface* (.115) Figure (open) (closed) b o-ring (.115) * For use with smooth bore and catcher s mitt interfaces only (OPN) (CLOSD) (OPN) (CLOSD) O-Ring (See table below) Ø.135 MX per Ø.135 MX spring pre-load per spring rate SF.116-2CC not req d 1.95 lbs 15.0 lbs/in Conductive O Ring SF SMOOTH OR not req d 1.21 lbs 5.5 lbs/in -4CC req d 1.21 lbs 5.5 lbs/in 10 11

7 Ordering Information Configuration Part Number* Description Options P657 SMP (female) straight conn for flexible cables Cable Connectors PC Connectors Shrouds For Flexible Cables For Semi-rigid & Semi-flex Cables Through hole oard Mount Surface Mount dge Mount Flange Mount P600 P601 P663 P651 P658 P652 P655 P659 P662 P654 P603 SMP (female) rt angle conn for flexible cables, 18 GHz SMP (female) rt angle conn for flexible cables, 26.5 GHz SMP (male) straight panel mount conn for flexible cables SMP (female) straight conn for semi-rigid and semi-flex cables SMP (female) float mount conn for semi-rigid and semi-flex cables SMP (female) rt. angle for semi-rigid/semi-flex cables, 12 GHz SMP (female) rt. angle for semi-rigid/semi-flex cables, 26.5 GHz SMP (female) rt. angle for semi-rigid/semi-flex cables, 18 GHz SMP (male) bulkhead panel mount conn for semi-rigid cables SMP (male) PC mount to a straight termination SMP (male) straight PC mount - square body vailable for different flexible cables (see figure) & cable versions available (see figure) Different heights and detents available (see figure) P646 SMP (male) rt. angle PC mount Different heights available (see figure) P677 P703 P797 P839 P606 P698 P670 P672 P673 SMP shroud solder-in surface mount - short body SMP (male) straight surface mount SMP (male) straight to surface mount w/ posts SMP (male) straight surface mount SMP (male) straight edge mount connector SMP (male) straight edge mount connector SMP shroud - full detent straight 2-hole flange mount SMP shroud - limited detent straight 2-hole flange mount SMP shroud - smooth bore straight 2-hole flange mount Thread-in P676 SMP shroud - Thread-in Press-in P675 P769 SMP press-in shroud SMP press-in shroud - Short ody Different detents available (see figure) Different flange dimensions available (see figure) Different detents available (see figure) Field-replaceable P836 SMP (male) 2-hole flange mount (accepts pin) Narrow flange version available (see figure) Hermetics Opens, Shorts, Loads ullets/dapters P680 P682 P683 P761 P918 P919 P930 + SMP (male) hermetic shroud - Short ody SMP (male) hermetic shroud SMP (male) hermetic thread-in w/ mounting nut SMP (male) hermetic thread-in SMP (female) 50 Ohm termination SMP (male) 50 Ohm termination SMP (female) Short P SMP (female) Open P617 P650 P912 P914 P916 SMP (female) to SMP (female) bullet SMP (female) to SMP (female) bullet - short body SMP (male) bulkhead to SMP (male) catcher s mitt SMP (male) to SMP (female) adapter SMP (male) to SMP (male) catcher s mitt Different detents and pin styles available (see figure) Different lengths available (see figure) Different detents available (see figure) P922 SMP (female) to SMP (female) spring loaded bullet See chart for available lengths * ll parts have a suffix. Please refer to figures for more information + These part numbers don t require an additional suffix Carlisle Interconnect Technologies / londra lvd., Cerritos, C Toll Free / Fax / CarlisleIT.com Carlisle Interconnect Technologies, ll trademarks, service marks and trade names are property of their respective holding companies. ll Rights Reserved. Rev

Corning Gilbert Inc. Microwave Push-on Interconnects 1

Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics