RG142-TNMNM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR. Regulatory Compliance/Certifications

Transcription

1 RG142-TNMNM-3M Product Classification Product Series Product Type RG142 CNT Jumper with interface types and, 3 m RG142 Braided cable assembly General Specifications Body Style, Connector A Body Style, Connector B Interface, Connector A Interface, Connector B Length m ft Specification Sheet Revision Level A Jumper Assembly Sample Label Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system page 1 of 5 most current information. Revised: November 10, 2017

2 RG142-TNMNM-3M Included Products RG142TNM-CR Type for RG142 braided cable page 2 of 5 most current information. Revised: November 10, 2017

3 Type for RG142 braided cable Product Classification Brand Product Type General Specifications Interface Body Style Brand Electrical Specifications Operating Frequency Band Cable Impedance Connector Impedance RF Operating Voltage, maximum (vrms) dc Test Voltage Outer Contact Resistance, maximum Inner Contact Resistance, maximum Insulation Resistance, minimum Average Power Peak Power, maximum Insertion Loss, typical CNT Braided cable connector CNT MHz 50 ohm 50 ohm V 1000 V 0.25 mohm 1.00 mohm 5000 MOhm MHz 2.50 kw 0.05 db page 3 of 5

4 Outline Drawing Mechanical Specifications Outer Contact Attachment Method Crimp Outer Contact Plating Trimetal Inner Contact Plating Gold Inner Contact Attachment Method Solder Interface Durability 500 cycles Interface Durability Method IEC :9.5 Connector Retention Tensile Force 134 N 30 lbf Connector Retention Torque 0.17 N-m 0.13 ft lb Insertion Force 4.90 N 1.10 lbf Insertion Force Method IEC :9.3.5 Pressurizable No Coupling Nut Proof Torque 1.70 N-m 1.25 ft lb Coupling Nut Proof Torque Method IEC :9.3.6 Coupling Nut Retention Force N lbf Coupling Nut Retention Force Method IEC : Dimensions Nominal Size in page 4 of 5

5 Diameter Height Length Weight mm 0.88 in cm 8.80 in mm 1.31 in g 0.07 lb Environmental Specifications Operating Temperature Storage Temperature Water Jetting Test Mating Water Jetting Test Method Regulatory Compliance/Certifications -40 C to +85 C (-40 F to +185 F) -65 C to +125 C (-85 F to +257 F) Mated IEC 60529:2001, IP65 Mechanical Shock Test Method IEC Climatic Sequence Test Method IEC Damp Heat Steady State Test Method IEC Thermal Shock Test Method IEC Vibration Test Method IEC Corrosion Test Method IEC Standard Conditions Attenuation, Ambient Temperature 20 C 68 F Average Power, Ambient Temperature 40 C 104 F Average Power, Inner Conductor Temperature 100 C 212 F Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz MHz Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Insertion Loss, typical 0.05v freq (GHz) (not applicable for elliptical waveguide) page 5 of 5