APPROVED EQUIPMENT REGISTER -CABLES & CABLE ACCESSORIES-

Transcription

1 1. SCOPE This document lists the underground cables and cable accessories which are for connection to the SP Distribution ltd, SP Manweb plc and SP Transmission ltd networks. The categories of equipment covered by this document include the following:- Cables. Jointing & Terminating Accessories and consumables. Ducts, Warning Tapes and Tiles. Users should always ensure that they are referring to the latest issue of this document. 2. ISSUE RECORD This is a maintained document. Issue Date Issue No Author Amendment Details February 2002 Issue 1 Paul Cunningham Original issue July 2005 Issue 2 Paul Cunningham Updated to include new equipment. March 2007 Issue 3 Jim Livie Addition of MV Re-enterable Resin June 2007 Issue 4 Paul Cunningham Detail added for 132kV and above May 2008 Issue 5 Paul Cunningham ducting updated and other minor changes. February 2009 Issue 6 Paul Cunningham General updates February 2011 Clark Sherry Reviewed and updated to include new equipment. 3. ISSUE AUTHORITY Author Owner Issue Authority Clark Sherry Senior Engineer Alastair Graham Cables & Overhead Lines Asset Manager Jeff Hunt Head of Asset Management.. 4. REVIEW This document will be reviewed as by Approval of new equipment and materials or as items are removed from the list. SP Power Systems Limited Page 1 of 60

2 CONTENTS 1. SCOPE ISSUE RECORD ISSUE AUTHORITY REVIEW REFERENCES POWERSYSTEMS TECHNICAL SPECIFICATIONS POWERSYSTEMS DRAWINGS BRITISH STANDARDS (BS) ELECTRICITY ASSOCIATION TECHNICAL SPECIFICATIONS (EATS) ELECTRICITY ASSOCIATION ENGINEERING RECOMMENDATIONS (ER) INTERNATIONAL ELECTROTECHNICAL COMMISSION GLOSSARY EQUIPMENT APPROVAL CATEGORIES STANDARD REQUIREMENTS KV, 11KV, LOW VOLTAGE, MULTICORE AND MULTIPAIR CABLES PLASTIC DUCTS FOR UNDERGROUND CABLES PLASTIC WARNING TAPES AND TILES KV AND 33KV JOINTS AND TERMINATIONS APPROVED CABLES UP TO AND INCLUDING 33KV APPROVED MANUFACTURER REFERENCES KV CABLES XLPE Insulated Single Core 50mm 2 Copper Wire Screen KV CABLES XLPE Insulated Single Core cables XLPE Insulated Three Core cables XLPE Insulated 1-core cables LSOH Oversheath (Orange) LOW VOLTAGE CABLES core & 4-core Waveform cable Copper CNE or Earth conductor core & 4 core solid sectoral Aluminium Mains cable concentric Copper CNE or Earth conductor and LSOH Oversheath (Orange) LV Substation Cables, Single Core Service Cables SP Power Systems Limited Page 2 of 60

3 Service cables LSOH Oversheaths (Orange) MULTI CORE CABLES MULTI PAIR CABLES GENERAL WIRING CABLES APPROVED DUCTS, WARNING TAPES AND TILES PLASTIC DUCTS & ACCESSORIES FOR UNDERGROUND CABLE WARNING TAPES AND TILES APPROVED JOINTS & TERMINATIONS KV JOINTS kV Straight & Branch joints for XLPE 1-core cables kV Transition Straight Joints for XLPE to PILC Cables kV Pot End Module Kits KV TERMINATIONS kV Indoor Terminations for 1-core XLPE cables kV Outdoor Terminations for XLPE 1-core cables kV "Inner cone" Connectors for XLPE 1-core cables kV Transformer Separable Tee connectors for XLPE 1-core cables KV SUPPLEMENTARY CONNECTORS/MODULES KV JOINTS kV Straight Joints for XLPE cables kV Transition Straight Joints for XLPE to PILC/PICAS cables kV Trifurcating Straight Joints for XLPE cables kV Transition Trifurcating Straight Joints for XLPE to PILC/PICAS cables kV Pot End Module Kits kV Loop Joint Module Kits (XLPE-XLPE) kV Transition Loop Joint Kits (XLPE-PILC/PICAS) kV Branch Joints (XLPE-XLPE) kV Transition Branch Joints (XLPE onto PILC/PICAS) Build up, Earthing and screening kits for XLPE to XLPE and XLPE to PILC/PICAS joints KV TERMINATIONS Indoor Terminations Separable "Elbow" & "T" Connectors Outdoor Terminations APPROVED LV JOINT KITS & COMPONENTS LOW VOLTAGE SERVICE CABLE JOINTS SP Power Systems Limited Page 3 of 60

4 LV Service Stop Ends LV Service Straight Joints LV Service Cut, Test and Remake and/or Branch Joints LOW VOLTAGE MAINS CABLE JOINTS LV Mains Straight Joints (3-core waveform to 3-core waveform) LV Mains Straight Joints (4-core waveform to 4-core waveform) LV Mains Straight Joints (3-core waveform to 4-core waveform) LV Mains Straight Joint Transitional; (3-core or 4-core waveform to 4-core PILC) LV Single Core Solidal Sectoral Aluminium Straight Joint LV Mains Branch Joints (3-core waveform to 3-core waveform) LV Mains Branch Joints (4-core waveform to 4-core waveform) LV Mains Branch Joints (3-core waveform to 4-core waveform) LV Mains Branch Joint Transitional (3-core waveform to 4-core PILC) LV Mains Branch Joint Transitional (4-core waveform to 4-core PILC) LV Mains Loop Joints (3-core & 4-core waveform) LV Mains Loop Joints (Transitional or PILC to PILC) LV Mains 3-Loose End Joints LV Mains Stop Ends (3-core) LV Mains Stop Ends (4-core) LV Mains Stop Ends (Consac) LV Mains Stop Ends (PILC) including old concentric mains LV Mains Service Branch Joints LOW VOLTAGE MAINS PILLAR, TOC, OR INDUSTRIAL CUT-OUT TERMINATION core Waveform core Waveform LOW VOLTAGE SERVICE & MAINS CABLE POLE TERMINATION core Waveform to Droppers core Waveform to Pole Mounted Fuses core Waveform to Droppers core Waveform to Pole Mounted Fuses LV Service Pole Terminations MODULES FOR LV SERVICE CONNECTIONS MODULES FOR LV TEMPORARY JOINTING DURING FAULT LOCATION/REPAIR PROCESSES LV ABANDONMENT KITS APPROVED LV LINK BOXES & SERVICE DISTRIBUTION UNITS LV LINK BOXES SP Power Systems Limited Page 4 of 60

5 13.2 LV SERVICE DISTRIBUTION UNIT CABLE SEALING CAPS Heatshrink cable sealing caps Coldshrink cable sealing caps APPROVED TAPES APPROVED ISOCYANATE FREE RESINS PERMANENT RESINS TEMPORARY RE-ENTERABLE RESINS APPROVED PLUMBING METALS SOLDER AND PLUMBING METAL CABLE SYSTEMS FOR USE AT 132 KV AND ABOVE KV XLPE CABLES AND ASSOCIATED ACCESSORIES KV XLPE CABLES AND ASSOCIATED ACCESSORIES KV XLPE CABLES AND ASSOCIATED ACCESSORIES SP Power Systems Limited Page 5 of 60

6 5. REFERENCES 5.1 PowerSystems Technical Specifications CAB CAB CAB CAB CAB Technical Specification for power cables up to and including 33kV and associated auxiliary cables.. Technical Specification for Joints & Terminations on 11kV & 33kV Polymeric Insulated cables. Specification for ducting for power cables Specification for 132kV cable and Accessories Plumbing metals and solders. 5.2 PowerSystems Drawings Service cable lead-in tube (Hockey stick) Hockey stick details (D.C.M. version) Arrangement of polythene insulated telephone cables ScottishPower Ducting for fibre optic cables SP Power Systems Limited Page 6 of 60

7 5.3 British Standards (BS) BS 441 BS 6234 BS 6346 BS 7870 Specification of purchasing requirements for flux-cored and solid soft solder wire. Specification for polyethylene insulation and sheaths of electric cables. Specification for armoured electric cables having PVC insulation. LV and MV polymeric-s insulated cables for use by distribution and generation utilities (Implementation of HD 603, 604, 605, 620, 622, 626 and 627). HD629 Test requirements on accessories for use on power cables of rated voltage 6-36kV -Part 1 Cables Extruded Insulation BS EN Part 2 Cables impregnated insulation Soft solder alloys. Chemical composition and forms. 5.4 Electricity Association Technical Specifications (EATS) EATS EATS Polyethylene warning tape and protection tape for buried electricity supply cable. Plastic ducts for buried electrical cables. 5.5 Electricity Association Engineering Recommendations (ER) ER C81 ER C93 Type approved tests for joints for 600/1000 volt cable systems. Type approval tests for mechanical connections to metallic sheaths of cables. 5.6 International Electrotechnical Commission IEC Compression and mechanical connectors for power cables for rated voltages up to 36kV SP Power Systems Limited Page 7 of 60

8 6. GLOSSARY For the purpose of this Specification the following definitions shall apply: - The Company SP Distribution SP Transmission SP Manweb plc Energy Networks The Engineer The Tenderer PILC PICAS XLPE LSOH MDPE HDPE PE SAC N/E CNE SNE Refers to SP Distribution Ltd, SP Transmission Ltd and SP Manweb plc. The Distribution Licence Holder for the distribution service area formerly known as ScottishPower. The Transmission Licence Holder for the transmission service area formerly known as ScottishPower. The Distribution Licence Holder for the distribution service area formerly known as Manweb. The brand name for the division of ScottishPower group of Companies that encompasses SP Distribution Ltd, SP Transmission Ltd, SP Manweb plc and SP Power Systems Ltd. The Energy Networks nominated representative having authority over technical matters contained in this specification. Equipment approved in accordance the Energy Networks Equipment Approvals Procedure and which is considered suitable for installation on The Company s networks. The invited to submit a tender in accordance this specification. Paper Insulated Lead Covered cable. Paper Insulated Corrugated Aluminium Sheathed cable. Cross-Linked Polyethylene Low Smoke Zero Halogen sheathed cable Medium Density Polyethylene High Density Polyethylene Polyethylene Solid Aluminium Conductor Neutral Earth Combined Neutral Earth Separate Neutral and Earth SP Power Systems Limited Page 8 of 60

9 7. EQUIPMENT APPROVAL CATEGORIES Cables and cable accessories listed in the Equipment Register may, where appropriate, have been assigned particular Approval categories. The categories are defined below: Category S Category S equipment is that for which approval has been granted only for a specific contract or site. Category A Category A equipment is that which is fully for use on the SP Distribution ltd, SP Manweb plc and SP Transmission ltd networks. Where no approval category is indicated in the attached tables then Category A approval may be assumed. 8. STANDARD REQUIREMENTS Only equipment listed as in the Appendices to this document may be installed on the Company s networks. Items not listed in the Appendices may be considered for Approval by the Company, however, the Approval process may take some time and a charge for this work may be made kV, 11kV, Low Voltage, Multicore and Multipair Cables Shall comply the requirements of SP PowerSystems Technical Specification CAB Plastic Ducts for Underground Cables Shall comply the requirements of in SP PowerSystems Technical Specification CAB Plastic warning tapes and tiles Shall comply as appropriate the requirements of EATS kV and 33kV Joints and Terminations Shall comply the requirements of PowerSystems Technical Specification CAB SP Power Systems Limited Page 9 of 60

10 9. APPROVED CABLES UP TO AND INCLUDING 33KV 9.1 References Single or multiple References are listed for each cable type in sections 9.2 to 9.9 below. This table is a key to the References used. Reference Manufacturing location Note CCC-B Copper Cable Company BFK Plant, Poland Eric-S-S Ericsson Falun, Sweden Nex-H Nexans Hanover, Germany This factory has 3 extrusion lines, only cable manufactured on the extrusion line designated S119 is for use. Nex-N Nexans Namsos, Norway NKT-D NKT Asnaes, Denmark NKT-G NKT Cologne, Germany NKT-C NKT Changzhou, China Pry-W Prysmian Wrexham, Clwyd Trat-PSS Tratos Pieve San Stefano, Italy SP Power Systems Limited Page 10 of 60

11 9.2 33kV Cables XLPE Insulated Single Core 50mm 2 Copper Wire Screen mm 2 circular stranded Copper 33kV XLPE single core mm 2 circular stranded Aluminium 33kV XLPE single core mm 2 circular stranded Copper 33kV XLPE single core mm 2 circular stranded Aluminium 33kV XLPE single core mm 2 circular stranded Aluminium 33kV XLPE single core mm 2 circular stranded Copper 33kV XLPE single core mm 2 circular stranded Copper 33kV XLPE single core References (see section 9.1 for key) Nex-H*, Nex-N, NKT-D, NKT-C, NKT-G, Pry-W Nex-H*, NKT-G, Pry-W * The Nexans, Hanover factory has 3 extrusion lines. Only cable manufactured on the extrusion line designated S119 is for use kV Cables XLPE Insulated Single Core cables mm 2 circular solid Aluminium 11kV single core red oversheath mm 2 circular solid Aluminium 11kV single core red oversheath mm 2 circular solid Aluminium 11kV single core red oversheath mm 2 circular stranded Copper 11kV single core red oversheath mm 2 circular stranded Copper 11kV single core red oversheath mm 2 circular stranded Copper 11kV single core red oversheath. References (see section 9.1 for key) NKT-D, Pry-W NKT-D, Pry-W SP Power Systems Limited Page 11 of 60

12 XLPE Insulated Three Core cables mm 2 circular solid Aluminium 11kV 3-core 70mm 2 Copper wire screen and red oversheath. 185 mm 2 circular solid Aluminium 11kV 3-core 95mm 2 Copper wire screen and red oversheath. 300 mm 2 circular solid Aluminium 11kV 3-core 95mm 2 Copper wire screen and red oversheath. References (see section 9.1 for key) NKT-D, Pry-W XLPE Insulated 1-core cables LSOH Oversheath (Orange) mm 2 circular solid Aluminium 11kV single core LSOH oversheath mm 2 circular solid Aluminium 11kV single core LSOH oversheath mm 2 circular solid Aluminium 11kV single core LSOH oversheath. References (see section 9.1 for key) NKT-D, Pry-W 9.4 Low Voltage Cables 3-core & 4-core Waveform cable Copper CNE or Earth conductor core 95mm 2 solid sectoral Aluminium waveform cable core 185mm 2 solid sectoral Aluminium waveform cable core 300mm 2 solid sectoral Aluminium waveform cable core 95mm 2 solid sectoral Aluminium waveform cable core 185mm 2 solid sectoral Aluminium waveform cable core 240mm 2 solid sectoral Aluminium waveform cable. References (see section 9.1 for key) NKT-D, Pry-W SP Power Systems Limited Page 12 of 60

13 3-core & 4 core solid sectoral Aluminium Mains cable concentric Copper CNE or Earth conductor and LSOH Oversheath (Orange) core 95mm² Cu concentric N/E LSOH oversheath core 185mm² Cu concentric N/E LSOH oversheath core 300mm² Cu concentric N/E LSOH oversheath core 95mm² Cu concentric N/E LSOH oversheath core 185mm² Cu concentric N/E LSOH oversheath core 300mm² Cu concentric N/E LSOH oversheath. References (see section 9.1 for key) NKT-D, Pry-W LV Substation Cables, Single Core mm 2 circular solid sectoral aluminium, armoured mm 2 circular solid sectoral aluminium, un-armoured mm 2 circular solid sectoral aluminium, armoured References (see section 9.1 for key) CCC-B SP Power Systems Limited Page 13 of 60

14 Service Cables phase CNE 4mm 2 copper straight concentric phase CNE 25mm 2 aluminium straight concentric phase CNE 35mm 2 aluminium straight concentric phase CNE 25mm 2 aluminium straight concentric phase CNE 35mm 2 aluminium straight concentric phase SNE 4mm 2 copper split concentric phase SNE 25mm 2 aluminium split concentric phase SNE 35mm 2 aluminium split concentric phase SNE 25mm 2 aluminium split concentric phase SNE 35mm 2 aluminium split concentric phase SNE 35mm 2 copper split concentric References (see section 9.1 for key) Eric-S Service cables LSOH Oversheaths (Orange) phase CNE 35mm 2 aluminium straight concentric LSOH oversheath phase CNE 35mm 2 aluminium straight concentric LSOH oversheath phase SNE 35mm 2 aluminium split concentric LSOH oversheath phase SNE 35mm 2 aluminium split concentric LSOH oversheath phase CNE 25mm 2 aluminium straight concentric LSOH oversheath phase SNE 25mm 2 aluminium split concentric LSOH oversheath phase SNE 25mm 2 aluminium split concentric LSOH oversheath. References (see section 9.1 for key) Eric-S SP Power Systems Limited Page 14 of 60

15 9.5 Multi Core Cables core cable 2.5mm stranded copper conductors core cable 2.5mm stranded copper conductors core cable 2.5mm stranded copper conductors core composite metering cable core cable 2.5mm stranded copper conductors (7/0.67mm) core cable 2.5mm stranded copper conductors (7/0.67mm) References (see section 9.1 for key) CCC-B 9.6 Multi Pair Cables Pairs Conductor Remarks /0.8mm Cu Unfilled. Induced voltage < 5kV /0.8mm Cu Filled. Induced voltage >5kV <15kV /0.8mm Cu Unfilled. Induced voltage < 5kV /0.8mm Cu Unfilled. Induced voltage < 5kV /0.8mm Cu Unfilled. Induced voltage < 5kV Not on Stock 61 1/0.8mm Cu Unfilled. Induced voltage < 5kV References (see section 9.1 for key) CCC-B, Trat-PSS SP Power Systems Limited Page 15 of 60

16 9.7 General Wiring Cables Type Conductor Size (csa) Colour Remarks Supplier / mm 2 Grey/Brown Double Insulated Cu Grey/Blue Double Insulated Grey/Brown Double Insulated / mm 2 Cu Grey/Blue Double Insulated Green/Yellow Non Sheathed Grey/Brown Double Insulated / mm 2 Cu Grey/Blue Double Insulated Green/Yellow Non Sheathed / mm 2 Grey/Brown Double Insulated Cu Grey/Blue Double Insulated Grey/Brown Double Insulated / mm 2 Cu Grey/Blue Double Insulated Green/Yellow Non Sheathed Grey/Brown Double Insulated / mm 2 Cu Grey/Blue Double Insulated Green/Yellow Non Sheathed /1.04 6mm 2 Cu Green/Yellow Non Sheathed Batt Cables Cable Express Cables & Flexibles Strathclyde Cables Copper Cable Company SP Power Systems Limited Page 16 of 60

17 10. APPROVED DUCTS, WARNING TAPES AND TILES 10.1 Plastic Ducts & Accessories for Underground Cable The following list of plastic ducts and associated accessories are all manufactured and supplied by Emtelle. Emtelle Product Code Emtelle Scottish Power Resistance To Deformation Length RED HDPE 38/32MM X 100M COIL 32mm id ducting suitable for trenchless installation (38mm OD) Class 2 100m Coils RED HDPE 58/50MM X 50M COIL 50m X 50mm id ducting suitable for trenchless installation (58mm OD) Class 2 50m Coils TBA RED HDPE 58/50MM X 100M COIL 100m X 50mm id ducting suitable for trenchless installation (58mm OD) Class 2 100m Coils MM PE100 SDR11 X 100M RED 74mm id ducting suitable for trenchless installation(90mm OD SDR 11) Class 1 100m Coils S 90MM PE100 SDR11 X 50M RED 74mm id ducting suitable for trenchless installation(90mm OD SDR 11) Class 1 50m coils (9677) 110MM PE100 SDR11 X 100M RED 90mm id ducting suitable for trenchless installation (110mm OD SDR 11) Class 1 100m Coils S 110MM PE100 SDR11 X 50M RED 90mm id ducting suitable for trenchless installation (110mm OD SDR 11) Class 1 50m Coils MM HDPE SDR11 X 100M RED 110mm id ducting suitable for trenchless installation (125mm OD SDR 11) Class 1 100m coils S 125MM HDPE SDR11 X 50M RED 110mm id ducting suitable for trenchless installation (125mm OD SDR 11) Class 1 50m Coils MM HDPE SDR11 X 100M RED 125mm id ducting suitable for trenchless installation (160mm OD SDR 11) Class 1 100m coils S 160MM HDPE SDR11 X 50M RED 125mm id ducting suitable for trenchless installation (160mm OD SDR 11) Class 1 50m Coils MM HDPE SDR11 X 100M RED 180mm id ducting suitable for trenchless installation (200mm OD SDR 11) Class 1 100m coils S 200MM HDPE SDR11 X 50 RED 180mm id ducting suitable for trenchless installation (200mm OD SDR 11) Class 1 50m Coils MM HDPE SDR11 X 100M RED 147mm id ducting suitable for trenchless installation (180mm OD SDR 11) Class 1 100m coils S 180MM HDPE SDR11 X 50M RED 147mm id ducting suitable for trenchless installation (180mm OD SDR 11) Class 1 50m coils CABLE GUARD 3M X 25MM Guard Cable PVC 25*3.0m n/a 3m CABLE GUARD 3M X 55MM Guard Cable PVC 50*3.0m n/a 3m CABLE GUARD 3M X 80MM Guard Cable PVC 80*3.0m n/a 3m TBA CABLE GUARD 3M X 40MM Guard Cable PVC 40*3.0m n/a 3m SP Power Systems Limited Page 17 of 60

18 Emtelle Product Code Emtelle Scottish Power Resistance To Deformation length RED 110MM 3M C1 ELECTRIC 100mm id straight duct, single socket end (110mm OD upvc Duct) Class 1 3m effective length RED 110MM 6M C1 ELECTRIC 100mm id straight duct, single socket end (110mm OD upvc Duct) Class 1 6m effective length RED 110MM X 3M C2 ELECTRIC 100mm id straight duct, single socket end (110mm OD upvc Duct) Class 2 3m effective length S RED 160MM 3M C1 ELECTRIC 150mm id straight duct, single socket end (160mm OD upvc Duct) Class 1 3m effective length RED 160MM 6.6M C1 ELECTRIC 150mm id straight duct, single socket end (160mm OD upvc Duct) Class 1 6.6m effective length RED 160MM X 3M C2 ELECTRIC 150mm id straight duct, single socket end (160mm OD upvc Duct) Class 2 3m effective length RED 38MM HOCKEYSTICK BEND House service entry tube c/w intregral socket to suit 32mm duct (38mm OD) Class 2 n/a CONN SLEEVE 110MM RED Duct Couplers as. PVC cable duct coupler 100mm id straight duct n/a n/a CONN SLEEVE 160MM RED Duct Couplers as. PVC cable duct coupler 150mm id straight duct n/a n/a DOUBLE COUPLER 32MM RED Duct Couplers as. PVC cable duct 32mm n/a n/a RED 110MM C RAD 100mm ID x Degree bend Class 1 n/a RED 110MM 22.5 C RAD 100mm ID x 22.5 Degree bend Class 1 n/a RED 110MM 45DEG C RAD 100mm ID x 45 Degree bend Class 1 n/a RED 110MM 90DEG C RAD 100mm ID 90 x Degree bend Class 1 n/a U RED 160MM C RAD 150mm ID x Degree bend Class 1 n/a U RED 160MM 22.5 C RAD 150mm ID x 22.5 Degree bend Class 1 n/a U RED 160MM 45DEG C1 1200MM RAD 150mm ID x 45 Degree bend Class 1 n/a U RED 160MM 90DEG C1 1200MM RAD 150mm ID x 90 Degree bend Class 1 n/a (5862) BEND 90 DEG 50MM ID 250MM RAD Bend 90 Deg PVC Duct 50mm (3 phase service cables only) Class 1 n/a TBA RED 110MM 90DEG C1 450MM RAD 100mm ID x 90 Degree bend (For building entry only) n/a n/a TBA RED 160MM 90DEG C1 560MM RAD 150mm ID x 90 Degree bend (For building entry only) n/a n/a GREEN OPTICOM 4 WAY SP 110mm OD straight duct, single socket 4 pre-installed sub ducts n/a 6.6m effective length SP Power Systems Limited Page 18 of 60

19 GREEN DEG OPTICOM BEND Opticom Green 110mm duct + 4 fibre sub ducts deg bend GREEN 22.5 DEG OPTICOM BEND Opticom Green 110mm duct + 4 fibre sub ducts 22.5 deg bend GREEN OPTICOM FLEXI BEND Opticom Green 110mm duct + 4 fibre sub ducts flexible bend BLOWING GUN Rope blowing gun for Opticom TBA 3218 TYPE B TERMINATOR TBA 3613 OPTICOM REPAIR KIT Class 1 Class 1 Class 1 n/a n/a n/a GREEN OPTICOM 4WAY SP MANWEB Opticom Green 110mm duct + 4 fibre sub ducts x 6.6m SP Manweb printing Class 1 6.6m, MoQ 524m GREEN 110MM X 6M 110mm Duct, No subduct Class 1 6m MoQ 540 TBA 3818 GREEN 110MM DEG BEND Class 1 TBA 3817 GREEN 110MM 22.5 DEG BEND Class 1 TBA 3839 GREEN 110MM 45 DEG BEND Class 1 TBA 3840 GREEN 110MM 90 DEG BEND Class GREEN 110MM CONNECTOR SLEEVE Opticom Green 110mm duct + 4 fibre sub ducts Coupling Class 1 TBA 5505 RED 110MM X DEG 3.9M RAD BEND C1 Class 1 TBA 5506 RED 110MM X 22.5 DEG 1.75M RAD BEND C1 Class 1 TBA 5482R RED 160MM X DEG 3.9M RAD BEND C1 Class 1 TBA 5479R RED 160MM X 22.5 DEG 3.9M RAD BEND C1 Class 1 TBA 5640 RED 160MM X 6M RINGSEAL SP 132KV C1 Class 1 TBA 5420R RED 160MM X 22.5 DEG 3.9M RAD BEND RING SEAL C1 Class 1 TBA 5453U RED 160MM X DEG 3.9M RAD BEND RING SEAL C1 Class 1 TBA 5339 BLK 160MM CONNECTOR DOUBLE Class 1 TBA 5645 RED 160MM X 6M RINGSEAL SP 275KV C1 Class 1 TBA RED 200MM X 6M RINGSEAL 275KV SP C1 Class 1 SP Power Systems Limited Page 19 of 60

20 TBA RED 200MM X 22.5 DEG 3.9M RAD RINGSEAL BEND C1 Class 1 TBA RED 200MM X DEG 3.9M RAD RINGSEAL BEND C1 TBA 5505 RED 110MM X DEG 3.9M RAD BEND C1 Class Warning tapes and tiles Type Voltage Remarks LV Warning tape LV 0.1mm thick, 365m rolls inc. SPEN logo Boddingtons kV Protection Tape 11kV 2.5mm thick, 40m rolls inc. SPEN logo kV protection Tiles 33kV 1000mm x 244mm x 12mm inc. SPEN logo Centriforce SP Power Systems Limited Page 20 of 60

21 11. APPROVED JOINTS & TERMINATIONS kV Joints 33kV Straight & Branch joints for XLPE 1-core cables SP Part Reference Straight joint for 1-core XLPE CSJA-36D/1XU-1XU- Includes connector 150mm 2 up to 240mm 2 Cu cables GB Straight joint for 1-core XLPE CSJA-36E/1XU-1XU- Without connector. BSMB mm 2 Alu GB01 + BSMB185- connector Straight joint for 1-core XLPE CSJA-36E/1XU-1XU- Without connector. See section 11.3 for 500mm 2-630mm 2 Cu GB01 full range of connectors for this kit Branch joint for 1-core XLPE SMOE Includes connector 150mm² Straight joint for 1-core XLPE SJ1430D-Wire185SP Includes connector 150mm 2 Straight joint for 1-core XLPE SJ1430D-Wire630SP Without connectors. Crimps available 500mm 2 or 630mm 2 Cu cables from Prysmian Straight joint for 1-core 150mm 2 up 94-AP632-1-SP Includes connector. Requires a 6mm to 240mm 2 XLPE cables Allen key socket to shear off Straight joint for 1-core XLPE 94-AP633-1-SP Includes connector. Requires a 6mm 150mm 2 to 1-core lead sheath Allen key socket to shear off covered XLPE mm 2 Straight joint for 500mm 2 cables 94-AC641-1-SP- Includes crimp C500C11W42 Straight joint for 630mm 2 cables 94-AC641-1-SP- Includes crimp C630C11W44 TYCO Pirelli Components 3M SP Power Systems Limited Page 21 of 60

22 33kV Transition Straight Joints for XLPE to PILC Cables core XLPE 150mm 2-240mm 2 to 1- core PILC 0.3 sq inch Cu core XLPE 500mm-630mm 2 to 1- core PILC sq inch Cu 1-core XLPE 500mm-630mm 2 to 1- core PILC 1.5sq inch Cu (Standard or Milliken conductor) x 1-core XLPE 150mm 2 to 3-core PILC 0.1 sq inch Cu H type trifurcating joint x 1-core XLPE 150mm 2-240mm 2 to 3-core PILC 0.3 sq inch Cu H type trifurcating joint x x 1-core XLPE 150mm 2-240mm 2 to 3-core PILC sq inch Cu H type trifurcating joint x 1-core XLPE 150mm 2-240mm 2 to 3-core PILC 0.3 sq inch Cu HSL trifurcating joint SP Part Reference CATJ-36D/1XU-1HL- Includes connector GB CATJ-36F/1XU-1HL- Without connector. See section 11.3 GB01 for full range of connectors for this kit SMOE Without connector. See section 11.3 for full range of connectors for this kit CATJ-36D/1XU- 3SB-GB02 + SMOE CATJ-36D/1XU- 3SB-GB CATJ-36D/1XU- 3SB-GB x BAH CATJ-36D/1XU-3HL- GB01 SMOE kit contains smaller tubes and connectors for small PILC cable Includes connectors Phase connectors in joint kit are too small use 3 x BAH connectors. Includes connectors 1-core XLPE 150mm 2 to 1-core PILC JSCPX33CSP Includes connector 185mm 2 TYCO Prysmian SP Power Systems Limited Page 22 of 60

23 33kV Pot End Module Kits SP Reference 3 x x x x x x x x x x x x x x x x x x x x x x Use in Conjunction Part 1-core XLPE mm² / CSJ-EndSeal- Kit-C-GB02 1-core XLPE 400mm² CSJ-EndSeal- Kit-E-GB01 1-core XLPE 500mm² CSJ-EndSeal- Kit-E-GB01 1-core XLPE 630mm² CSJ-EndSeal- Kit-E-GB01 1-core PILC 0.3 sq inch Cu CSJ-EndSeal- Kit-C-GB02 1-core PILC 0.75 sq inch Cu CSJ-EndSeal- Kit-E-GB01 1-core PILC 1.0 sq inch Cu CSJ-EndSeal- Kit-E-GB01 3-core PILC 0.1 sq inch Cu H type CATJ- 36D/1XU-3SB- GB02 + SMOE CSJ- EndSeal-Kit-C- GB02 s quoted per circuit set of 3. 1-core Pot ends are made off by using an appropriately sized straight joint kit plus a set of polymeric rods from an End Seal kit. As above + larger connector As above + larger connector. As above + larger connector As above (connector included in kit) As above + larger connector As above + larger connector 3-core PILC pot ends made off using an appropriately sized trif joint kit + a set of poly rods from an End Seal kit. SMOE kit is for small PILC cables TYCO SP Power Systems Limited Page 23 of 60

24 1 x x x x x x x core PILC 0.3 sq inch Cu H type 3-core PILC 0.4/0.5 sq inch H type 3-core PILC 0.3 sq inch Cu HSL CATJ- 36D/1XU-3SB- GB02 + CSJ- EndSeal-Kit-C- GB CATJ- 36D/1XU-3SB- GB02 + BAH CSJ-EndSeal- Kit-D-GB CATJ- 36D/1XU-3HL- GB01 + CSJ- EndSeal-Kit-C- GB02 Connectors included As above + larger connector Connectors included 1-core XLPE 150mm 2 XLPE PE-01SP Prysmian TYCO kV Terminations 33kV Indoor Terminations for 1-core XLPE cables Core XLPE mm² Cu or Alu Coldshrink Termination (pack of 3) Core XLPE 400 mm² Alu or mm² Cu Coldshrink Termination (pack of 3) SP Reference Part , MV33TE1/SP Includes mechanical shear off lugs for phases and earths , MV33TE2/SP Includes mechanical shear off lugs for phases and earths SICAME SP Power Systems Limited Page 24 of 60

25 33kV Outdoor Terminations for XLPE 1-core cables SP Reference Part Core XLPE mm² Cu or Alu , MV33TE3/SP Includes mechanical shear off lugs for Coldshrink Termination (pack of 3) phases & earths Core XLPE 400 mm² Alu or , MV33TE4/SP Includes mechanical shear off lugs for 630mm² Cu Coldshrink Termination phases & earths (pack of 3) SICAME 33kV "Inner cone" Connectors for XLPE 1-core cables SP Reference Plug Size Part Lead Time 1-core XLPE 150mm 2 Cu or Alu Size weeks Set of 3 plugs per pack 1-core XLPE 150mm 2 Cu or Alu Size weeks Set of 3 plugs per pack 1-core XLPE 240mm 2 Cu or Alu Size weeks Set of 3 plugs per pack 1-core XLPE 400mm 2 Alu Size weeks Set of 3 plugs per pack Pfisterer 1-core XLPE 500mm 2 Cu Size weeks Set of 3 plugs per pack 1-core XLPE 630mm 2 Cu Size weeks Set of 3 plugs per pack 33kV Transformer Separable Tee connectors for XLPE 1-core cables SP reference Part core XLPE 150mm 2 Cu or Alu XM400TB/G /SP Three connectors per pack TBC 1-core XLPE 240mm 2 Cu or Alu XM400TB/G /SP Three connectors per pack core XLPE 400mm 2 Alu 3XM440TB/G /SP Three connectors per pack core XLPE 500mm 2 Cu XM440TB/G /SP Three connectors per pack core XLPE 630mm 2 Cu XM440TB/G /SP Three connectors per pack Nexans SP Power Systems Limited Page 25 of 60

26 kV Supplementary Connectors/Modules SP Reference Use in Conjunction Part Shear-off connector for 1-core XLPE BSMB mm 2 to 1-core XLPE 400mm Shear off connector for 1-core XLPE BSMB mm 2 to 1-core XLPE 500mm Shear off connector for 1-core XLPE BSMB mm 2 to 1-core XLPE 630mm Shear off connector for 1-core XLPE BSMB mm 2 to 1-core XLPE 630mm 2 Not held in stock Not held in stock Not held in stock Not held in stock Shear off connector for 1-core XLPE 500mm 2 to 1-core PILC 1.5sq inch Shear off connector for 1-core XLPE 630mm 2 to 1-core PILC 1.5sq inch Shear off connector for 1-core XLPE 500mm 2 to 1-core PILC 1.5sq inch (Milliken conductor) Shear off connector for 1-core XLPE 630mm 2 to 1-core PILC 1.5sq inch BAH SMOE joint kit SMOE joint kit SMOE joint kit SMOE joint kit Shear off connector for 1-core XLPE mm 2 Cu to 1-core PILC sq inch Cu EPPA /41-42/55-180A EPPA /45-42/55-180A EPPA /41-43/56-180A EPPA /45-43/56-180A manufacturer manufacturer manufacturer manufacturer SMOE Contains smaller tubes and (Milliken conductor) core PILC 0.1 sq inch Cu H type to 3 x 1-core XLPE 150mm 2-240mm 2 shear off connectors to suit 0.1sq inch PILC cable Shear off connector for 3-core PILC 0.4/0.5 sq inch Cu H type to 3 x 1-core XLPE 150mm 2-240mm BAH Shear off connector to suit 0.4/0.5 sq inch PILC cable TYCO SP Power Systems Limited Page 26 of 60

27 kV Joints 11kV Straight Joints for XLPE cables SP Part Reference core XLPE 95/185mm 2 SAC to 1-core XLPE CSJT-12B/1XU-1XU-GB01 Connector included 95/300mm 2 SAC core XLPE 300mm 2 SAC to 1-core XLPE 300mm CSJT-12C/1XU-1XU-GB01 Connector included SAC core XLPE 300mm 2 Cu to 1-core XLPE 300mm 2 Cu CSJT-12C/1XU-1XU-GB03 Connector included core XLPE 500mm 2 Cu to1-core XLPE 500mm 2 Cu CSJT-12E/1XU-1XU-GB01 Connector included core XLPE mm 2 SAC to 3-core XLPE CSJT-12B/3XU-3XU-GB01 Connectors included 300mm 2 SAC TYCO 11kV Transition Straight Joints for XLPE to PILC/PICAS cables SP Part Reference CATJ-12C/1XU-1HL-GB01 Connector included core XLPE 300mm 2 Cu to 1-core PILC 300mm 2 Cu core XLPE 500mm 2 Cu to 1-core PILC 500mm CATJ-12E/1XU-1HL-GB01 Connector included Cu core XLPE 95/300mm 2 SAC to 3-core PILC up to CATJ-12B/3XU-3SB-GB02 Connectors included. 70mm 2 Also requires build up kit and earth kit for PILC cable core XLPE 95/300mm 2 SAC to 3-core PILC/PICAS greater than 70mm 2 up to 185mm CATJ-12B/3XU-3SB-GB01 Connectors included. Also requires earth kit for PILC / PICAS cable core XLPE 95/300mm 2 SAC to 3-core PILC/PICAS greater than 185mm 2 up to 300mm CATJ-12C/3XU-3SB-GB01 Connectors included. Also requires earth kit TYCO SP Power Systems Limited Page 27 of 60

28 for PILC / PICAS cable and build up kit for 95mm 2 XLPE cable. 11kV Trifurcating Straight Joints for XLPE cables x 1-core XLPE 95/185mm 2 SAC to 3-core 95/300mm 2 XLPE SAC x 1-core XLPE 300mm 2 SAC to 3-core 95/300mm 2 XLPE SAC SP Part Reference CSJT-12B/1XU-3XU-GB01 Connectors included CSJT-12C/1XU-3XU-GB01 Connectors included. Also requires build up kit for 95mm 2 3c XLPE cable TYCO 11kV Transition Trifurcating Straight Joints for XLPE to PILC/PICAS cables SP Reference Part x 1-core XLPE 95/185mm 2 SAC to 3-core PILC up to 70mm CATJ-12B/1XU-3SB-GB01 Connectors included. Also requires build up kit and earth kit for PILC cable CATJ-12B/1XU-3SB-GB03 Connectors included x 1-core XLPE 95/185mm 2 SAC - 3-core PILC/PICAS greater than 70mm 2 up to 185mm 2 Also requires earth kit for PILC / PICAS cable CATJ-12C/1XU-3SB-GB03 Connectors included x 1-core XLPE 95/300mm 2 SAC - 3-core PILC/PICAS greater than 185mm 2 up to 300mm 2 Also requires earth kit for PILC / PICAS cable and build up kit for 95mm 2 XLPE cable. TYCO SP Power Systems Limited Page 28 of 60

29 x 1-core or 3-core XLPE 95/300mm 2 SAC- 6-core PILC sq inch Transition joint for 3-core PILC/PICAS to 3-core XLPE - 95mm² c/w connectors and jointing instructions. Transition joint for 3-core PILC/PICAS to 3-core XLPE - 185mm² c/w connectors and jointing instructions. Transition joint for 3-core PILC/PICAS to 3-core XLPE - 300mm² c/w connectors and jointing instructions. Trifurcating transition joint for 3-core PILC/PICAS to 3x1-core XLPE - 95mm² c/w connectors and jointing instructions. Trifurcating transition joint for 3-core PILC/PICAS to 3x1-core XLPE - 185mm² c/w connectors and jointing instructions. Trifurcating transition joint for 3-core PILC/PICAS to 3x1-core XLPE - 300mm² c/w connectors and jointing instructions SMOE Use in conjunction an appropriate transition branch joint. Also requires earth kit for PILC cable and 2 x build up kits for 6-core 0.1sq inch PILC cable. MV3CST1/SP MV3CST2/SP MV3CST3/SP MV3CTRT1/SP MV3CTRT2/SP MV3CTRT3/SP 3M SP Power Systems Limited Page 29 of 60

30 11kV Pot End Module Kits core XLPE mm 2 SAC / 3-core XLPE mm2 SAC / 3-core PILC/PICAS up to 185mm2 SP Reference Use in Conjunction , , , , , , Part CSJ-EndSeal- Kit-C-GB core PILC/PICAS greater than 185mm 2 up CSJ-EndSealto 300mm 2 Kit-D-GB01 1-core and 3-core Pot ends are made off by using an appropriately sized straight joint kit plus a set of polymeric rods from End Seal kit. As above TYCO 11kV Loop Joint Module Kits (XLPE-XLPE) SP Reference Use in Conjunction Part core XLPE 95/300mm 2 SAC- 3-core XLPE 95/300mm 2 SAC CSJ-EndSeal- Kit-F-GB02 Tyco XLPE XLPE loop joints are made off by using an appropriately sized branch joint kit plus a set of polymeric rods from End Seal kit. TYCO SP Power Systems Limited Page 30 of 60

31 11kV Transition Loop Joint Kits (XLPE-PILC/PICAS) SP Reference Use in Conjunction Part core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS up to 95mm NA SMOE Connectors included. Also requires earth kit for PILC/PICAS cables + build up kits for 0.1 PILC cables core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS greater than 95mm 2 up to 300mm NA SMOE Connectors included. Also requires earth kit for PILC/PICAS cables TYCO 11kV Branch Joints (XLPE-XLPE) SP Reference Use in Conjunction Part core XLPE 95/300mm 2 SAC- 1-core XLPE 95/300mm 2 SAC core XLPE 95/300mm 2 SAC- 3-core XLPE 95/300mm 2 SAC NA CSBJ- 12F/1XU-2XU- GB NA CSBJ- 12F/3XU-6XU- GB01 Connectors included. Connectors included. TYCO SP Power Systems Limited Page 31 of 60

32 11kV Transition Branch Joints (XLPE onto PILC/PICAS) SP Reference Use in Conjunction Part core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS up to 95mm NA CATJ- 12F/3XU-6SB- GB core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS greater than 95mm 2 up to 300mm NA CATJ- 12F/3XU-6SB- GB x 1-core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS up to 95mm NA CATJ- 12F/1XU-6SB- GB x 1-core XLPE 95/300mm 2 SAC- 3-core PILC/PICAS greater than 95mm 2 up to 300mm NA CATJ- 12F/1XU-6SB- GB03 Connectors included. Also requires earth kit for PILC/PICAS cables + build up kits for 0.1 PILC cables. Connectors included. Also requires earth kit for PILC/PICAS cables. Connectors included. Also requires earth kit for PILC/PICAS cables + build up kits for 0.1 PILC cables. Connectors included. Also requires earth kit for PILC/PICAS cables. TYCO SP Power Systems Limited Page 32 of 60

33 Build up, Earthing and screening kits for XLPE to XLPE and XLPE to PILC/PICAS joints SP Reference Use in Conjunction Part kV Paper to Paper conversion kit for use , SMOE Converts transition base kit paper cables up to 185mm 2 into paper to paper joint kV Paper to Paper conversion kit for use SMOE Converts transition base kit paper cables greater than 185mm 2 up to 300mm 2 into paper to paper joint Earthing kit for mm 2 PICAS , , , , , , , , , , , Earthing kit for up to 50mm 2 PILC , , , , Earthing kit for up to greater than 50mm 2 up to 300mm 2 PILC Build up kit for up to 70mm 2 PILC for transition straight/trifurcating and branch /loop joints Build up kit for 95mm 2 XLPE 3-core for transition straight/trifurcating joints , , , , , , , , , , , SMOE SMOE SMOE , , , CSJ-BuildUp- CATJ-GB , CSJ-BuildUp-Kit- C-GB02 Build up kit for paper cables up to 35mm² 3M joints only PILCSO/SP Screen termination kit for screened paper cables 3M joints only SPM/SP Earth kit for PILC cable up to 35mm² 3M joints only MEHV0/SP Earth kit for PILC cable 50mm² to 95mm² 3M joints only MEHV1/SP Earth kit for PILC cable 120mm² up to 300mm² 3M joints only MEHV2/SP Earth kit for 95mm² PICAS cable 3M joints only MEHV3/SP Earth kit for 185m² and 300mm² PICAS cable 3M joints only MEHV4/SP TYCO 3M SP Power Systems Limited Page 33 of 60

34 kV Terminations Indoor Terminations SP Reference Use in Conjunction Part Bushing protection boots, kit of SMOE For bushing diameter 46-70mm Build up kit for small diameter bushings SMOE For bushing diameter 31-45mm x 1-Core XLPE 95mm² SAC C/W phase and earth lugs (M12) x 1-Core XLPE 185mm² SAC C/W phase and earth lugs (M12) x 1-Core XLPE 300mm² SAC C/W phase and earth lugs (M12) x 1-Core XLPE 300mm² Cu C/W phase and earth lugs (M12) x 1-Core XLPE 500mm² Cu C/W phase and earth lugs (M12) x 1-Core XLPE 630mm² Cu C/W phase and earth lugs (M12) NA MVSCIT1/SP Lugs supplied in kit NA MVSCIT3/SP Lugs supplied in kit NA MVSCIT5/SP Lugs supplied in kit NA MVSCIT7/SP Lugs supplied in kit NA MVSCIT9/SP Lugs supplied in kit NA MVSCIT11/SP Lugs supplied in kit TBC 95mm Al shearbolt lug M16 palm hole ITK95-16/SP Pack of 3 TBC 185mm Al shearbolt lug M16 palm hole ITK185-16/SP Pack of 3 TBC 300mm Al shearbolt lug M16 palm hole ITK300-16/SP Pack of 3 TYCO SICAME SP Power Systems Limited Page 34 of 60

35 mm Cu shearbolt lug M16 palm hole HVTM1/3-16B Pack of mm Cu crimp lug M16 palm hole L500C11W-42(16) Pack of 3 TBC 630mm Cu crimp lug M16 palm hole L630C11W-44(16) Pack of 3 SICAME Separable "Elbow" & "T" Connectors core XLPE 95mm 2 SAC (BIL 95kV) 250 Amp Elbow interface A core XLPE 300mm 2 Cu (BIL 95kV) 630 Amp T connector interface C core XLPE 500mm 2 Cu (BIL 95kV) 1250 Amp T connector interface C 1-core XLPE 95mm 2 SAC (BIL 95kV) 250 Amp Elbow interface A SP Reference Part XK158LR-95-E-45/SP Pack of 3. Kit contains all lugs XK400TB/G /SP Pack of 3. Kit contains all lugs XK440TB/G /SP Pack of 3. Kit contains all lugs Nexans FMCE-250-T3 Prysmian Outdoor Terminations x 1-Core XLPE 95mm² SAC C/W phase and earth lugs (M12) x 1-Core XLPE mm² SAC C/W phase and earth lugs (M12) x 1-Core XLPE 500mm² SAC C/W phase and earth lugs (M12) SP Reference Part MVSCTE1/SP Lugs plus Earth Parking Bars, Dropper Brackets and Cruciform Fixings supplied in kit , MVSCTE2/SP Lugs plus Earth Parking Bars, Dropper Brackets and Cruciform Fixings supplied in kit A MVSCTE3/SP Lugs supplied in kit SICAME SP Power Systems Limited Page 35 of 60

36 x 1-Core XLPE 630mm² SAC C/W phase and earth lugs (M12) Core XLPE 95mm² SAC C/W phase and earth lugs (M12) Core XLPE mm² SAC C/W phase and earth lugs (M12) B MVSCTE4/SP Lugs supplied in kit MV3CTE1/SP Lugs plus Earth Parking Bars, Dropper Brackets and Cruciform Fixings supplied in kit , MV3CTE2/SP Lugs plus Earth Parking Bars, Dropper Brackets and Cruciform Fixings supplied in kit kV Pole Crucifix Assembly 4912KIT Complete surge arrestor bonding plate and earth termination bar. SICAME SP Power Systems Limited Page 36 of 60

37 12. APPROVED LV JOINT KITS & COMPONENTS 12.1 Low Voltage Service Cable Joints LV Service Stop Ends Use in Conjunction Part mm² Single phase CNE plastic service cable stop end mm² Single phase SNE plastic service cable stop end mm² 3 phase CNE/WaveCon plastic service cable stop end mm² 3 phase SNE plastic service cable stop end 4-35mm² (0.007"-0.06") Single phase PILC twin/concentric stop end 4-35mm² (0.007"-0.06") Three phase 4-core PILC stop end 4-35mm² Single phase CNE plastic service cable stop end 4-35mm² Single phase SNE plastic service cable stop end 16-35mm² 3 phase CNE/WaveCon plastic service cable stop end 16-35mm² 3 phase SNE plastic service cable stop end 0.8 litres of resin 0.8 litres of resin 1.1 litres of resin 1.1 litres of resin 1.8 litres of resin 1.8 litres of resin 1.2 litres of resin 1.2 litres of resin 2.2 litres of resin 2.2 litres of resin SE1/SP SE2/SP SE3/SP SE4/SP SE5/SP SE6/SP TLNK-SE1-SP01 TLNK-SE1-SP02 TLNK-SE3-SP03 TLNK-SE3-SP04 Tyco SP Power Systems Limited Page 37 of 60

38 LV Service Straight Joints Use in Conjunction Part mm² Single phase (CNE/SNE) plastic service cable straight joint 1.8 litres of resin SJ1/SP mm² 3 phase (CNE/SNE) plastic service cable straight joint 4-35mm² (0.007"-0.06") Single phase plastic CNE/SNE - PILC twin/concentric transition straight joint 3.5 litres of resin 3.5 litres of resin SJ2/SP SJ3T/SP mm² (0.0225"-0.06") 3 phase plastic CNE/SNE - 4-core PILC transition straight joint 4.1 litres of resin SJ4T/SP 4-35mm² Single phase (CNE/SNE) plastic service cable straight joint 16-35mm² 3 phase (CNE/SNE) plastic service cable straight joint 2.6 litres of resin 2.2 litres of resin TLNK-SS1-SP07 TLNK-SS3-SP08 Tyco LV Service Cut, Test and Remake and/or Branch Joints Use in Conjunction Part mm² Single phase Base Kit for CNE/SNE plastic service cables 16-35mm² Three phase Base Kit for CNE/SNE plastic service cables 2.9 litres of resin 5.1 litres of resin CT1P/SP CT3P/SP SP Power Systems Limited Page 38 of 60

39 mm² Single phase Base Kit for Twin, concentric PILC or Three phase PILC service cables 7.1 litres of resin CT1L/SP 4-35mm² Single phase Base Kit for CNE/SNE plastic service cables 16-35mm² Three phase Base Kit for CNE/SNE plastic service cables 2.2 litres of resin 5.0 litres of resin TLNK-SB1-SP11 TLNK-SB3-SP12 Tyco 12.2 Low Voltage Mains Cable Joints LV Mains Straight Joints (3-core waveform to 3-core waveform) Use in Conjunction Part Up to 95mm² - 95mm² 3-core Waveform straight joint Up to 185mm² - 185mm² 3-core Waveform straight joint Up to 300mm² - 300mm² 3-core Waveform straight joint Up to 95mm² - 95mm² 3-core Waveform straight joint Up to 185mm² - 185mm² 3-core Waveform straight joint Up to 300mm² - 300mm² 3-core Waveform straight joint 8.4 litres of resin 14.8 litres of resin 21.5 litres of resin 10.0 litres of resin 15.0 litres of resin 21.5 litres of resin SMJ95W3/SP SMJ185W3/SP SMJ300W3/SP TLNK-MMS-SP19 TLNK-MMS-SP20 TLNK-MMS-SP21 Tyco SP Power Systems Limited Page 39 of 60

40 LV Mains Straight Joints (4-core waveform to 4-core waveform) Use in Conjunction Part Up to 95mm² - 95mm² 4-core Waveform straight joint 8.4 litres of resin SMJ95W4/SP Up to 185mm² - 185mm² 4-core Waveform straight joint 14.8 litres of resin SMJ185W4/SP Up to 300mm² - 300mm² 4-core Waveform straight joint 21.5 litres of resin SMJ300W4/SP Up to 95mm² - 95mm² 4-core Waveform straight joint 10.0 litres of resin TLNK-MMS-SP22 Up to 185mm² - 185mm² 4-core Waveform straight joint 15.0 litres of resin TLNK-MMS-SP23 Up to 300mm² - 300mm² 4-core Waveform straight joint 21.5 litres of resin TLNK-MMS-SP24 Tyco LV Mains Straight Joints (3-core waveform to 4-core waveform) Use in Conjunction Part Up to 95mm² 3-core Waveform to 95mm² 4-core Waveform straight joint 8.4 litres of resin SMJ95W3/4/SP Up to 185mm² 3-core Waveform to 185mm² 4-core Waveform straight joint 14.8 litres of resin SMJ185W3/4/SP Up to 300mm² 3-core Waveform to 300mm² 4-core Waveform straight joint 21.5 litres of resin SMJ300W3/4/SP Up to 95mm² 3-core Waveform to 95mm² 4-core Waveform straight joint 10.0 litres of resin TLNK-MMS-SP25 Tyco SP Power Systems Limited Page 40 of 60

41 Up to 185mm² 3-core Waveform to 185mm² 4-core Waveform straight joint 15.0 litres of resin TLNK-MMS-SP26 Up to 300mm² 3-core Waveform to 300mm² 4-core Waveform straight joint 21.5 litres of resin TLNK-MMS-SP27 LV Mains Straight Joint Transitional; (3-core or 4-core waveform to 4-core PILC) Use in Conjunction Part Up to 95mm² 3-core or 4-core Waveform to 50-95mm² 4-core PILC straight joint 9.2 litres of resin SMJ95T3&4/SP Up to 185mm² 3-core or 4-core Waveform to >95-185mm² 4-core PILC straight joint 18.0 litres of resin SMJ185T3&4/SP Up to 300mm² 3-core or 4-core Waveform to > mm² 4-core PILC straight joint 24.6 litres of resin SMJ300T3&4/SP LV Single Core Solidal Sectoral Aluminium Straight Joint Use in Conjunction Solidal sectoral Aluminium straight joint 480mm-740mm 7.4 litres of resin STTJ1/SP Part Kit suitable for armoured or unarmoured cables SP Power Systems Limited Page 41 of 60