Safety Instructions Proline Promag 500

Transcription

1 XA01524D/06/EN/ Products Solutions Services Safety Instructions Proline Promag 500 Cl.I, II, III Div.1 for XP (Ex d Flameproofed version) C US Document: XA01524D Safety instructions for electrical apparatus for explosionhazardous areas classified according to the National Electrical Code (NEC) and Canadian Electrical Code (CEC) 3

2

3 Proline Promag 500 XA01524D Proline Promag 500 Table of contents Associated documentation... 4 Manufacturer's certificates... 4 Extended order code... 4 Safety instructions: General... 8 Safety instructions: Installation... 9 Temperature tables... 9 Connection data: Signal circuits Endress+Hauser 3

4 XA01524D Proline Promag 500 Associated documentation All documentation is available: On the CD-ROM supplied (not included in the delivery for all device versions). Available for all device versions via: Internet: Smart phone/tablet: Endress+Hauser Operations App In the Download Area of the Endress+Hauser web site: Download This document is an integral part of the following Operating Instructions: Measuring device Documentation code HART FOUNDATION Fieldbus PROFIBUS PA Modbus RS485 Promag H 500 BA01398D BA01479D BA01404D BA01401D Promag P 500 BA01399D BA01480D BA01405D BA01402D Promag W 500 BA01400D BA01481D BA01406D BA01403D Additional documentation: Document type Contents Documentation code Control drawing As wanted on the nameplate. Please note the documentation associated with the device. Manufacturer's certificates Certificate number CSA Notified body CSA: Canadian Standards Association Extended order code The extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is clearly visible. Additional information about the nameplate is provided in the associated Operating Instructions. 4 Endress+Hauser

5 Proline Promag 500 XA01524D Structure of the extended order code * * * * * * _ * * * * * * * * * * + A*B*C*D*E*F*G* Device type Basic specifications Optional specifications * = Spaceholder: At this position, an option (number or letter) selected from the specification is displayed instead of the placeholders. Device type The device and the device design is defined in the "Device type" section (Product root). Basic specifications The features that are absolutely essential for the device (mandatory features) are specified in the basic specifications. The number of positions depends on the number of features available. The selected option of a feature can consist of several positions. Optional specifications The optional specifications describe additional features for the device (optional features). The number of positions depends on the number of features available. The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists of a number or a letter (e.g. J = test, certificate). The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate). More detailed information about the device is provided in the following tables. These tables describe the individual positions and IDs in the extended order code which are relevant to hazardous locations. Device type Position Order code for Option selected Description 1 Instrument family 5 Electromagnetic flowmeter 2 Sensor H, P, W Sensor type 3 Transmitter 5 Transmitter type: 4-wire, compact version 4 Generation index B Platform generation 5, 6 Nominal diameter H: DN 2 to 150 P: DN 15 to 600 W: DN 25 to 2000 Nominal diameter of sensor Endress+Hauser 5

6 XA01524D Proline Promag 500 Proline 500 digital Proline 500 Order code for "Integrated ISEM electronics", option A "Sensor" Order code for "Integrated ISEM electronics", option B "Transmitter" Transmitter 2 Connecting cable 3 Sensor connection housing with integrated ISEM Transmitter with integrated ISEM 2 Coil current cable 3 Signal cable 4 Sensor connection housing Basic specifications Position 1, 2 Order code for "Approval" Option selected Position 10 Order code for "Integrated ISEM electronics" Option selected Type of protection Transmitter Sensor CD B Cl.I, Div.1, Cl.II, III, Gps. A-G Cl.I, Div.1, Cl.II, III Gps. A-G CN A Cl.I, Div.2, Gps. A-D Cl.I, Div.1, Cl.II, III Gps. A-G Item Order code for Option selected Description 4, 5 Output; input 1 BA 4-20mA HART CA GA HA MA SA TA 4-20mA HART Ex-i PROFIBUS PA PROFIBUS PA Ex-i Modbus RS485 FOUNDATION Fieldbus FOUNDATION Fieldbus Ex-i 6 Output; input 2 A W/o; B C 4-20mA 4-20mA Ex-i 6 Endress+Hauser

7 Proline Promag 500 XA01524D Item Order code for Option selected Description D E F G H I J Configurable I/O initial setting off Pulse/freq./switch output Pulse output, phase-shifted Pulse/freq./switch output Ex-i Relay 4-20mA input Status input 7 Output; input 3 A W/o; B C D E F G H I J 4-20mA 4-20mA Ex-i Configurable I/O initial setting off Pulse/freq./switch output Pulse output, phase-shifted Pulse/freq./switch output Ex-i Relay 4-20mA input Status input 8 Output; input 4 1) A W/o; B C D E G H I J 4-20mA 4-20mA Ex-i Configurable I/O initial setting off Pulse/freq./switch output Pulse/freq./switch output Ex-i Relay 4-20mA input Status input 9 Display, Operation F 4-line, illuminated; touch control G 4-line, illuminated; touch control + WLAN 10 Integrated ISEM electronics A Sensor B Transmitter 21, 22 Device model A1 1 1) The order code "Output; input 4" is only available for the Proline 500 digital transmitter. Endress+Hauser 7

8 XA01524D Proline Promag 500 Optional specifications ID Order code for Option selected Description Jx Test, Certificate JN Ambient temperature of measuring device 50 C Safety instructions: General Staff must meet the following conditions for mounting, electrical installation, commissioning and maintenance of the device: Be suitably qualified for their role and the tasks they perform. Be trained in explosion protection. Be familiar with national regulations (e.g. CEC or NEC). Install the device according to the manufacturer's instructions and national regulations. Do not operate the device outside the specified electrical, thermal and mechanical parameters. Only use the device in media to which the wetted materials have sufficient durability. Refer to the temperature tables for the relationship between the permitted ambient temperature for the sensor and/or transmitter, depending on the range of application, and the temperature classes. Modifications to the device can affect the explosion protection and must be carried out by staff authorized to perform such work by Endress+Hauser. When using in hybrid mixtures (gas and dust occurring simultaneously), additional measures should be taken. Please see approval body. Open the device only if one of the following conditions is met: An explosive atmosphere is not present. A waiting time of 10 minutes is observed after switching off the power supply. Observe all the technical data of the device (see nameplate). Class II Group G: The surface temperature of the apparatus cannot exceed +165 C. For transmitter housing "Proline 500 digital" and plastic connection housing of the sensor Promag W, IP68: Avoid electrostatic charging of the housing (e.g. friction, cleaning, maintenance, strong medium flow). LWARNING Substitution of components is not permitted. Substitution of components may impair intrinsic safety. 8 Endress+Hauser

9 Proline Promag 500 XA01524D Safety instructions: Installation Continuous service temperature of the connecting cable: 40 to +80 C( 50 to +80 C for optional specification, ID Jx (Test, Certificate) = JN); but at least according to the service temperature range of the application taking into account additional influences of the process conditions (T a,min and T a,max + 20 K). Only use certified cable entries suitable for the application. Observe selection criteria as per CEC or NEC. When the measuring device is connected, attention must be paid to explosion protection at the transmitter. In potentially explosive atmospheres: Do not disconnect the electrical connection of the power supply circuit when energized. Do not open the connection compartment cover when energized. Install the transmitter circuit wiring according to Canadian Electrical Code (CEC) respective National Electrical Code (NEC) using threaded conduit or other wiring methods in accordance with articles 500 to 510. Transmitter enclosures with XP rating: Enclosures are factory sealed when using in ambient temperature of not lower than -40 C. Sensor enclosures with XP rating: Enclosures are factory sealed. Basic specification, Position 12, order code for "Sensor connection housing", option B, C To protect the housing of stainless steel housings ensure that the housing gasket is flat and not bent when closing the housing cover. Replace bent gaskets. Intrinsic safety Potential equalization Integrate the device into the local potential equalization. If the ground connection has been established via the pipe as specified, it is also possible to integrate the sensor into the potential equalization system via the pipe. Temperature tables Ambient temperature Minimum ambient temperature: T a = 40 C Optional specification, ID Jx (Test, Certificate) = JN Transmitter: T a = 50 C Maximum ambient temperature: T a = +60 C depending on the temperature class: Endress+Hauser 9

10 XA01524D Proline Promag 500 Transmitter Proline 500 digital Non-hazardous area, Zone 2 T a Material transmitter housing Non-hazardous area Aluminum Polycarbonat 60 Transmitter Proline 500 Zone 1 T a Zone 21 Maximum surface temperature at T a = 60 C 85 C Medium temperature Minimum medium temperature: T m = 40 to 0 C depending on the selected device version (see nameplate!) Maximum medium temperature: T m for depending on the maximum ambient temperature T a Proline 500 digital Basic specification, Position 10, order code for "Integrated ISEM electronics", option A 10 Endress+Hauser

11 Proline Promag 500 XA01524D Without thermal insulation Promag H T m PFA Promag P T m PTFE PFA Promag P High-temperature version T m PTFE PFA Promag W T m Hard rubber PU Endress+Hauser 11

12 XA01524D Proline Promag 500 Promag W High-temperature version T m Hard rubber PU Promag P High-temperature version With thermal insulation according to Endress+Hauser specifications For information on the thermal insulation of the device, see the "Thermal insulation" section of the Operating Instructions T m PTFE PFA Promag W High-temperature version T m Hard rubber PU Endress+Hauser

13 Proline Promag 500 XA01524D With thermal insulation without Endress+Hauser specifications 1 A B 1 Position of the reference point for temperature measurement A Standard version B High-temperature version 1 Reference point A Promag P High-temperature version T m, max T m PTFE PFA Promag W High-temperature version T m, max T m Hard rubber PU Proline 500 Basic specification, Position 10, order code for "Integrated ISEM electronics", option B Endress+Hauser 13

14 XA01524D Proline Promag 500 Promag H Without thermal insulation T m PFA Promag P T m PTFE PFA Promag P High-temperature version T m PTFE PFA Promag W T m Hard rubber PU Endress+Hauser

15 Proline Promag 500 XA01524D Promag W High-temperature version T m Hard rubber PU Promag P High-temperature version With thermal insulation according to Endress+Hauser specifications For information on the thermal insulation of the device, see the "Thermal insulation" section of the Operating Instructions T m PTFE PFA Promag W High-temperature version T m Hard rubber PU Endress+Hauser 15

16 XA01524D Proline Promag 500 With thermal insulation without Endress+Hauser specifications 1 A B 2 Position of the reference point for temperature measurement A Standard version B High-temperature version 1 Reference point A Promag P High-temperature version T m, max T m PTFE PFA Promag W High-temperature version T m, max T m Hard rubber PU Endress+Hauser

17 Proline Promag 500 XA01524D Connection data: Signal circuits The following tables contain specifications which are dependent on the transmitter type and its input and output assignment. Compare the following specifications with those on the nameplate of the transmitter. Terminal assignment Transmitter: supply voltage, input/outputs HART Supply voltage (+) 2 ( ) 26 (+) 27 ( ) 24 (+) 25 ( ) 22 (+) 23 ( ) 20 (+) 21 ( ) Device-specific terminal assignment: adhesive label in terminal cover. FOUNDATION Fieldbus Supply voltage (+) 2 ( ) 26 (A) 27 (B) 24 (+) 25 ( ) 22 (+) 23 ( ) 20 (+) 21 ( ) Device-specific terminal assignment: adhesive label in terminal cover. PROFIBUS PA Supply voltage (+) 2 ( ) 26 (B) 27 (A) 24 (+) 25 ( ) 22 (+) 23 ( ) 20 (+) 21 ( ) Device-specific terminal assignment: adhesive label in terminal cover. Modbus RS485 Supply voltage (+) 2 ( ) 26 (B) 27 (A) 24 (+) 25 ( ) 22 (+) 23 ( ) 20 (+) 21 ( ) Device-specific terminal assignment: adhesive label in terminal cover. Endress+Hauser 17

18 XA01524D Proline Promag 500 Safety-related values Order code for "Output; input 1" Option BA Output type Current output 4 to 20 ma HART U N = 30 V Safety-related values "Output; input 1" 26 (+) 27 ( ) Option GA PROFIBUS PA U N = 32 V Option MA Modbus RS485 U N = 30 V Option SA FOUNDATION Fieldbus U N = 32 V Order code for "Output; input 2"; "Output; input 3"; "Output; input 4" Option B Option D Option E Option F Output type Current output 4 to 20 ma User configurable input/output Pulse/frequency/ switch output Double pulse output Output; input 2 24 (+) 25 ( ) U N = 30 V U N = 30 V U N = 30 V U N = 30 V Safety-related values Output; input 3 22 (+) 23 ( ) Output; input 4 1) 20 (+) 21 ( ) Option H Relay output U N = 30 V I N = 100 ma DC/500 ma AC Option I Current input 4 to 20 ma U N = 30 V Option J Status input U N = 30 V 1) The order code "Output; input 4" is only available for the Proline 500 digital transmitter. 18 Endress+Hauser

19 Proline Promag 500 XA01524D Intrinsically safe values Order code for "Output; input 1" Output type Intrinsically safe values "Output; input 1" 26 (+) 27 ( ) Option CA Current output 4-20 ma HART Ex i U i = 30 V l i = 100 ma P i = 1.25 W L i = 0 C i = 0 Option HA PROFIBUS PA Ex i Ex ia 1) U i = 30 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf NIFW 2) U i = 32 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf Option TA FOUNDATION Fieldbus Ex i Ex ia U i = 30 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf NIFW U i = 32 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf 1) Only for order code "Approval", Option CD 2) Only for order code "Approval", Option CN Order code for "Output; input 2"; "Output; input 3" "Output; input 4" Option C Option G Output type Current output 4-20 ma Ex i Pulse/frequency/ switch output Ex i Output; input 2 24 (+) Intrinsically safe values 25 ( ) U i = 30 V l i = 100 ma P i = 1.25 W L i = 0 C i = 0 U i = 30 V l i = 100 ma P i = 1.25 W L i = 0 C i = 0 Output; input 3 22 (+) 23 ( ) Output; input 4 1) 20 (+) 21 ( ) 1) The order code "Output; input 4" is only available for the Proline 500 digital transmitter. Endress+Hauser 19

20