Instruction. MI October I/A Series Models 83.-D and -T Vortex Flowmeter Intrinsic Safety Connection Diagrams
|
|
- Amie Patterson
- 6 years ago
- Views:
Transcription
1 Instruction MI October 2000 I/A Series Models 83.-D and -T Vortex Flowmeter Intrinsic Safety Connection Diagrams
2 MI October 2000
3 Intrinsically Safe Connection Diagrams If your Model 83.-D/-T I/A Series Vortex Flowmeter is classified as intrinsically safe, connect per the following control diagrams for the appropriate agency. Factory Mutual (FM) Certified HAZARDOUS LOCATION NONHAZARDOUS LOCATION CLASS I, DIVISION 1, GROUPS A, B, C, D CLASS II, DIVISION 1, GROUPS E, F, G CLASS III, DIVISION 1 INTRINSICALLY SAFE FLOWMETER 4-20 ma FM ENTITY TRANSMITTER APPROVED ASSOCIATED APPARATUS OR BARRIER INTRINSICALLY SAFE GROUND (NOTE 2) NOTE: THE PULSE CIRCUIT IS ISOLATED FROM THE 4-20 ma LOOP. ENTITY PARAMETERS V max = 36.1 V I max = 150 ma Ci = 3 nf Li = 0 nh PULSE FM ENTITY APPROVED ASSOCIATED APPARATUS OR BARRIER NOTES: 1. BARRIER MUST BE INSTALLED IN AN ENCLOSURE THAT MEETS THE REQUIREMENTS OF ANSI/ISA S RESISTANCE BETWEEN INTRINSICALLY SAFE GROUND AND EARTH GROUND MUST BE LESS THAN 1 OHM. 3. CONTROL EQUIPMENT CONNECTED TO ASSOCIATED APPARATUS OR BARRIER MUST NOT USE OR GENERATE MORE THAN 250 V rms OR V dc. 4. INSTALLATION SHOULD BE IN ACCORDANCE WITH ANSI/ISA RP 12.6 INSTALLATION OF INTRINSICALLY SAFE SYSTEMS FOR HAZARDOUS (CLASSIFIED) LOCATIONS, ANSI/NFPA 70 NATIONAL ELECTRICAL CODE, AND BARRIER MANUFACTURER S INSTALLATION REQUIREMENTS. 5. AN APPROVED DUST-TIGHT SEAL IS REQUIRED FOR CLASS II AND III APPLICATIONS. Figure 1. Loop Diagram for Model 83.-D/-T Vortex Flowmeter NOTE To maintain intrinsic safety in 83.-D/-T Vortex Flowmeters, current loop and pulse output field wiring pairs must be run in separate cables or with separate shields connected to intrinsically safe ground. 1
4 MI October 2000 Intrinsically Safe Connection Diagrams ORDINARY LOCATIONS CLASS I, GROUPS A, B, C, AND D, DIVISION 1, AND CLASS II, GROUPS E, F, AND G, DIVISION 1 HAZARDOUS LOCATIONS 65 SERIES INDICATOR 2 PLACES (OPTIONAL) FLOWMETERS ZERO B ZERO A INTRINSICALLY SAFE FIELD WIRING 3A2-I2D 3A2-I3D 3A4-I2DA 3AD-I3IA-C 3AS-I2IA-C 3AC-I3I CS-E/FGB-A TO MAINTAIN INTRINSIC SAFETY IN 83 SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 2. UIO and UCM Subsystems Loop Diagram 2
5 Intrinsically Safe Connection Diagrams MI October 2000 ORDINARY LOCATIONS CLASS I, GROUPS A, B, C, AND D, DIVISION 1, AND CLASS I, GROUPS E, F, AND G, DIVISION 1 HAZARDOUS LOCATIONS 0 TO 10 V dc SIGNAL 65 SERIES INDICATOR 2 PLACES (OPTIONAL) FLOWMETERS ZERO B ZERO A INTRINSICALLY SAFE FIELD WIRING 2AI-I2V-FGB 2AI-I3V-FGB 2AS-I2I-FGB 2AS-I3I-FGB 2AS-I3I-FGB-VLA TO MAINTAIN INTRINSIC SAFETY IN 83.-D/-T SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 3. SPEC 200 System Loop Diagram 3
6 MI October 2000 Intrinsically Safe Connection Diagrams ORDINARY LOCATIONS CLASS I, GROUPS A, B, C, AND D, DIVISION 1, AND CLASS II, GROUPS E, F, AND G, DIVISION 1 HAZARDOUS LOCATIONS FLOWMETER 3F4-I2D1A - CS-E/FGB-A ASSOCIATED APPARATUS TO MAINTAIN INTRINSIC SAFETY IN 83 SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 4. FIO System Loop Diagram; Intrinsically Safe Apparatus Input 4
7 Intrinsically Safe Connection Diagrams MI October 2000 Canadian Standards Association (CSA) Certified ORDINARY LOCATIONS HAZARDOUS LOCATIONS CLASS I, DIVISION 1, GROUPS A, B, C, AND D CLASS II, DIVISION 1, GROUPS E, F, AND G CLASS III, DIVISION 1 0 TO 10 V dc SIGNAL 65 SERIES INDICATOR 2 PLACES (OPTIONAL) FLOWMETERS ZERO B ZERO A INTRINSICALLY SAFE FIELD WIRING 2AI-I2V-CGB 2AI-I3V-CGB 2AS-I2I-CGB (CHANNEL A) 2AS-I3I-CGB (CHANNEL A) TO MAINTAIN INTRINSIC SAFETY IN 83.-D/-T SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 5. SPEC 200 System Loop Diagram 5
8 MI October 2000 Intrinsically Safe Connection Diagrams ORDINARY LOCATIONS HAZARDOUS LOCATIONS CLASS I, DIVISION 1, GROUPS A, B, C, AND D CLASS II, DIVISION 1, GROUPS E, F, AND G CLASS III, DIVISION 1 65 SERIES INDICATOR 2 PLACES (OPTIONAL) FLOWMETERS ZERO B ZERO A INTRINSICALLY SAFE FIELD WIRING 3A2-I2D-CGB 3A2-I3D-CGB 3A4-I2DA-CGB (24 V, 62 ma RATING) 3AD-I3IA-CGB (24 V, 62 ma RATING) 3AS-I2I-CGB 3AS-I3I-CGB TO MAINTAIN INTRINSIC SAFETY IN 83.-D/-T SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 6. UIO and MICROSPEC Subsystems Loop Diagram 6
9 Intrinsically Safe Connection Diagrams MI October 2000 ORDINARY LOCATIONS HAZARDOUS LOCATION CLASS I, DIVISION 1, GROUPS A, B, C, AND D CLASS II, DIVISION 1, GROUPS E, F, AND G, CLASS III, DIVISION 1 FLOWMETER 3F4-I2D1A SERIES ASSOCIATED APPARATUS TO MAINTAIN INTRINSIC SAFETY IN 83E.-D/-T SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure 7. FIO System Loop Diagram; Intrinsically Safe Apparatus Input 7
10 MI October 2000 Intrinsically Safe Connection Diagrams ORDINARY LOCATIONS HAZARDOUS LOCATION CLASS I, DIVISION 1, GROUPS A, B, C, AND D CLASS II, DIVISION 1, GROUPS E, F, AND G, CLASS III, DIVISION 1 CSA Certified Zener Barriers Rated at: V max R min Class Temp. 28 V 300 Ω T3C 28 V diode 300 Ω T3C RETURN 83 SERIES WITH INTEGRAL SENSOR RS-83E-D/-T SERIES REMOTE SENSOR 83E-D/-T SERIES FOR REMOTE SENSOR TO MAINTAIN INTRINSIC SAFETY IN 83E-D/-T SERIES FLOWMETERS, CURRENT LOOP AND PULSE Figure D/-T Series Vortex Flowmeters Loop Diagram ISSUE DATES JAN 2000 OCT 2000 Vertical bars to right of text or illustrations indicate areas changed at last issue date. The Foxboro Company 33 Commercial Street Foxboro, MA United States of America Inside U.S.: FOXBORO ( ) Outside U.S.: Contact your local Foxboro representative. Facsimile: (508) Foxboro, FIO, I/A Series, MICROSPEC, and SPEC 200 are trademarks of The Foxboro Company. Invensys is a trademark of Invensys plc. Copyright 2000 The Foxboro Company All rights reserved An Invensys company MB 100 Printed in U.S.A. 1000
IP26 Series Current to Pneumatic Converter
Product Specifications 06.2016 PSS EVE0403 A-(en) IP26 Series Current to Pneumatic Converter The IP26 (current to pressure) transducer converts a 4 20mA electrical current signal to a proportional linear
More informationSpecifications. Specifications. Transfer Characteristics Accuracy at 20 C (68 F) Temperature Drift
Appendix A Specifications 1797-IE8 and -IE8NF Input Modules Specifications Number of Inputs IS Input Type IS Module Type Resolution Transfer Characteristics Accuracy at 20 C (68 F) Temperature Drift Functional
More informationLoop Powered Indicator
Instruction Manual Model PD686 Loop Powered Indicator M397 January 3, 2019 JOWA USA, Inc. 59 Porter Road Littleton, MA 01460-1431 USA Tel: 978-486-9800 Fax: 978-486-0170 PD686 I.S. and N.I. NEMA 4X, IP67
More information2-WIRE UNIVERSAL TEMPERATURE TRANSMITTER
SAFE INSTALLATION MANUAL (FM APPROVAL) -WIRE UNIVERSAL TEMPERATURE TRANSMITTER (HART communication, intrinsically safe/explosion-proof) MODEL B6U/B6U-B BEFORE USE... SAFETY PRECAUTIONS This manual describes
More informationIndustrial Pressure Transducers
Industrial Pressure Transducers User s Manual T Model T Model The Swagelok T model transducer is engineered for use in industrial pressure measurement applications where intrinsically safe ratings are
More informationCERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 0202 USA T: 781 72 400 F: 781-72-975 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL EQUIPMENT
More informationThie. Automation Products Rev. Chang Date Name Supersedes Dwg. : Part Class:
Page: 1 of 3 - - 2003 Date Name Name 27.03.03 Thiem. Title FM/CSA-Control-Document Appr. / 5 08.07.11 Thie. Std. 4 07.10.09 Lasa. 3 26.06.06 Thie. Drwg.-No. (Part-No.) 2 22.05.06 Thie. 901265 1 27.03.
More informationSafety Instructions Proline Promass 100
XA00160D/06/EN/03.14 71261250 Products Solutions Services Safety Instructions Proline Promass 100 Modbus RS485 Cl.I Div.1, Zone 1 for IS (Ex i Intrinsically safe version) C US Document: XA00160D Safety
More informationIntrinsic Safety Control Drawing
s Intrinsic Safety Control Drawing A5E00455287 system in total "No revision to drawing without prior Approval by FM Approvals!" PLC PC Non hazardous area PROFIBUS DP RS 485-IS Coupler PROFIBUS RS 485-IS
More informationCSA Hazardous Area Approvals Fisher FIELDVUE DVC6005 Series Remote Mount Digital Valve Controllers
Instruction Manual Supplement DVC6005 Digital Valve Controllers CSA Hazardous Area Approvals Fisher FIELDVUE DVC6005 Series Remote Mount Digital Valve Controllers Hazardous Area Approvals and Special Instructions
More informationCSA Hazardous Area Approvals Fisher FIELDVUE DVC6200 Series Digital Valve Controllers
Instruction Manual Supplement DVC6200 Digital Valve Controllers CSA Hazardous Area Approvals Fisher FIELDVUE DVC6200 Series Digital Valve Controllers SIS Hazardous Area Approvals and Special Instructions
More informationKENCO Loop Powered Magnetostrictive Transmitter. KMD SERIES Operation and Installation Manual. Table of Contents
KENCO ENGINEERING COMPANY P.O. BOX 470426, TULSA, OK 74147-0426 PHONE: (918) 663-4406 FAX: (918) 663-4480 http://www.kenco-eng.com e-mail: info@kenco-eng.com KENCO Loop Powered Magnetostrictive Transmitter
More informationQN5O, QXBO, QNBO, QX7O, QN7O, QXCO, QNCO
QUARTZ with -0 ma Position Transmitter or Potentiometer (QXO, QNO, QXBO, QNBO, QXO, QNO, QXO, QNO ) SERIES Thru-Bolt Mounting Pub # 00rev Installation & Adjusting Instructions. Attach mounting plate to
More informationINTRINSICALLY SAFE DUPLEXER
INTRINSICALLY SAFE DUPLEXER MADE IN THE U.S.A. DESCRIPTION The Intrinsically Safe Duplexer, ISD, is a low cost SCADA ready intrinsically safe pump controller designed to perform level control for duplex
More informationHT880 and HT885 FM Approved Humidity Transmitter Assemblies Installation and Operating Instructions
HT880 and HT885 FM Approved Humidity Transmitter Assemblies Installation and Operating Instructions Tel: 763. 571.3121 Fax: 763. 571.0927 www.minco.com Description Models HT880 and HT885 are 2-wire temperature
More informationD1061S INSTRUCTION MANUAL. RS422/RS485 Fieldbus Isolating Repeater Din-Rail Model D1061S. D RS422 / RS485 Fieldbus Isolating Repeater
DS INSTRUCTI MANUAL RS/RS Fieldbus Isolating Repeater Din-Rail Model DS D - RS / RS Fieldbus Isolating Repeater ISM00- Characteristics General Description: The single channel DIN Rail RS / RS Fieldbus
More informationModel LD-LPIX EXPLOSION-PROOF LOOP POWERED INDICATOR
DEVAR Inc. 706 Bostwick Avenue, Bridgeport, CT 06605 203-368-6751 FAX 203-368-3747 http://www.devarinc.com e-mail: info@devarinc.com Model LD-LPIX EXPLOSION-PROOF LOOP POWERED INDICATOR R Manual No. 990649
More informationCERTIFICATE OF COMPLIANCE
FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL
More informationJM Enclosure Dimensions (in mm)
ub #0revB process networking solutions Junction Module (JM ) Enclosure with: FOUNDATION Fieldbus Input/Output Module (JMM9 ) These I/O Modules are designed to function as FOUNDATION Fieldbus nodes with
More informationFLEX Ex Power Supplies
Installation Instructions FLEX Ex Power Supplies (Cat. Nos. 1797-PS2N, -PS2E) About the Power Supplies The power supply is an essential component in the operation of an intrinsically safe system. It must
More informationGeneral Specifications
General Specifications GS 01F06F01-01EN Model DY Vortex Flowmeter Model DYA Vortex Flow Converter FOUNDATION Fieldbus Communication Type General FOUNDATION Fieldbus is the digital communication line for
More informationAlphaline Temperature Transmitters
Alphaline Temperature Transmitters Accepts RTD and thermocouple inputs Available with an integral meter Dual compartment housing provides the highest reliability in harsh industrial environments Offers
More informationControlNet Ex Tap Terminator Installation Instructions
Installation Instructions Tap Terminator Installation Instructions (Cat No 1797-TCAP) Use this document as a guide when you install a ControlNet TM Ex tap terminator This document will be packaged with
More informationMiniature Temptran RTD Transmitters
Miniature Temptran RTD Transmitters TT111 only TT211 only TT111, TT211 Overview Two models: TT111: UL-recognized component for Canada and United States. TT211: Wider ambient rating; Factory Mutual (FM)
More informationAH71, AH72, and AH73 FM Approved Humidity Transmitter Assemblies Installation and Operating Instructions
AH71, AH72, and AH73 FM Approved Humidity Transmitter Assemblies Installation and Operating Instructions Tel: 763. 571.3121 Fax: 763. 571.0927 www.minco.com Description Models AH71, AH72, and AH73 are
More informationI/A Series Mass Flow and Density Meters Model CFT50 Digital Coriolis Mass Flow Transmitter with HART Communication Protocol
Product Specifications I/A Series Mass Flow and Density Meters Model CFT50 Digital Coriolis Mass Flow Transmitter with HART Communication Protocol PSS 1-2B7 A The Model CFT50 Digital Coriolis Mass Flow
More informationExpert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters
Expert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters ll 2G EEx ia llc T6 As our products are continuously improved, we reserve the right to make any change in the stated specifications
More informationD1061S INSTRUCTION MANUAL. RS422/RS485 Fieldbus Isolating Repeater Din-Rail Model D1061S. D RS422 / RS485 Fieldbus Isolating Repeater
DS INSTRUCTI MANUAL RS/RS Fieldbus Isolating Repeater Din-Rail Model DS D - RS / RS Fieldbus Isolating Repeater ISM00- Characteristics General Description: The single channel DIN Rail RS / RS Fieldbus
More informationSTT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C
STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 34-TT-03-07 3/06 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature
More informationSTT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C
STT 3000 Series STT170 SMART TEMPERATURE TRANSMITTER Models STT171, STT173, STT17H, STT17F, STT17C 6/07 PRODUCT SPECIFICATION SHEET OVERVIEW The Honeywell STT170 series of programmable temperature transmitters
More informationCertificate of Compliance
Certificate of Compliance Certificate: 70163240 (166720) Issued to: WIKA Alexander Wiegand SE & Co. KG Alexander-Wiegand-Str 30 Klingenberg, Bayern 63911 GERMANY Attention: Harald Gollas The products listed
More informationSafety Instructions Proline Promag 500
XA01524D/06/EN/01.16 71327947 Products Solutions Services Safety Instructions Proline Promag 500 Cl.I, II, III Div.1 for XP (Ex d Flameproofed version) C US Document: XA01524D Safety instructions for electrical
More informationLevel Lance Model 5100
Sales Manual Section 100 Product Specification Model 5100 Level Lance Model 5100 GENERAL DESCRIPTION The Robertshaw Model 5100 Level-Lance is a microprocessor based, advanced technology On-Off level detection
More informationFLEX Ex V ac In/Quad-Ex dc Out Power Supply
Installation Instructions FLEX Ex 85 250V ac In/Quad-Ex dc Out Power Supply Catalog Number 1797-PS1N Topic Important User Information 2 About the Power Supplies 3 Understand System Planning 4 Electrostatic
More informationThe T6000 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T6000 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T6000 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
More information[ Rosemount 648 Wireless Temperature Transmitter. Rosemount 648 Wireless. Quick Installation Guide , Rev CA August 2011
Quick Installation Guide Temperature Transmitter Start Wireless Considerations Step 1: Physical Installation Step 2: Verify Operation Reference Information Product Certifications End www.rosemount.com
More informationR88000 T (including ATEX)
INSTRUCTION MANUAL R88000 T88000 (including ATEX) Factory set transmitters are ready to use. Connect according the labels. Otherwise follow the calibration instructions. Input signals ṮC RTD CONTENTS:
More informationCertificate of Compliance
FF01 Certificate of Compliance Certificate: 1294176 Master Contract: 209996 Project: 1294176 Issued to: Seika Mikrosystemtechnik GmbH Ellharter StraBe 10 D-87435 Kempten GERMANY The products listed below
More informationThe T6000 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional pneumatic output.
GENERAL INFORMATION T6000 SERIES TRANSDUCER Electro-Pneumatic (I/P, E/P) APPLICATIONS The T6000 Series Electro-Pneumatic Transducer converts a DC current or voltage input signal to a directly proportional
More informationPower supply. Calibration. Surface finishing. Seal. Process connection
Page 1 of 6 Description The measuring system is designed for flow measurement. Gas flow through the sensing section passes two PT 100 RTD transducers; one is used as a temperature sensing device whilst
More information250T Loop-Powered (2-wire) Transmitter 250T. Input. Isolation. 350T DC-Powered (3-wire) Transmitter 350T. Input. Isolation
Series Isolated Transmitters 250T Loop-Powered (2-wire) Transmitter PLC / DCS 250T S Sense Resistor P L IN Input Isolation OUT 4-20mA RLOAD 24V DC 350T DC-Powered (3-wire) Transmitter PLC / DCS 350T PWR
More informationHumidity Sensor/Transmitter Assembly
Humidity Sensor/Transmitter Assembly Wall/Duct Space Outside Air (OSA) Overview Minco humidity and humidity/temperature transmitters are designed using an advanced microprocessor. Digital signal processing
More informationGeneral Specifications
General Specifications EJX Series FOUNDATION TM Fieldbus Communication FOUNDATION fieldbus is the digital communication line for the field instruments, whose signal is internationally standardized by Fieldbus
More informationPhD Inline Vortex. Performance Specifications Accuracy. Operating Specifications
Description The Vortex PhD vortex shedding flowmeter measures process fluid flow by detecting the frequency at which vortices are shed from an obstruction in the process fluid line (the bluff body). A
More informationLiquid Level Sensors. M-Series Magnetostrictive Sensors
Liquid Level Sensors M-Series Magnetostrictive Sensors Model USTD II Underground Storage Tank Level Sensor For Leak Detection and Inventory Monitoring 550980 C Installation Instructions Table of Contents:
More informationSPEED SENSORS SIGNAL CONDITIONERS. Standard & Custom Sensors, Signal Conditioners and Interface Electronics
for INNOVATIVE SENSOR SOLUTIONS Standard & Custom Sensors, Signal Conditioners and Interface Electronics SPEED SENSORS Magnetic Speed Sensors (Active & Passive) Hall Effect Speed Sensors, GBR (Zero Speed)
More informationESSENTIAL INSTRUCTIONS Read this page before proceeding!
Instruction Sheet LIQ_MAN_ABR_/Rev.G January 2015 Remote Controlled HART SMART Two-Wire Conductivity Transmitter ESSENTIAL INSTRUCTIONS Read this page before proceeding! Your purchase from Rosemount Analytical,
More informationGeneral Specifications
General Specifications FN510 Field Wireless Multi-Function Module GENERAL This General Specification (GS) describes the specifications for Field Wireless Multi-Function Module. Combined with Field Wireless
More informationRTT20 I/A Series Temperature Transmitter
Instruction MI 020-460 October 1996 RTT20 I/A Series Temperature Transmitter Operation, Configuration, and Calibration Using a HART Communicator MI 020-460 October 1996 Contents General Description...
More informationIntroduction Intrinsic safe system How to select sensors How to select safety barriers...6 Revision Information...
Technical Information FLXA202 2-Wire Analyzer Selection Guide for Intrinsic Safety-type Associated Apparatus TM Contents Introduction...2 1. Intrinsic safe system...3 2. How to select sensors...5 3. How
More informationFM Hazardous Area Approvals Fisher FIELDVUE DVC6200 Series Digital Valve Controllers
Instruction Manual Supplement DVC6200 Digital Valve Controllers FM Hazardous Area Approvals Fisher FIELDVUE DVC6200 Series Digital Valve Controllers SIS Hazardous Area Approvals and Special Instructions
More informationMTL4000 SERIES. isolating IS interface units. For close integration of IS circuits into processconnected
For close integration of S circuits into processconnected systems 1 MTL4000 SERES isolating S interface units Compact modular design with plug-in connections High module/channel packing densities System
More informationUser s Manual. Manual Change No V-E. Please use the attached sheets for the pages listed below in IM 01F06F00-01EN (7th).
User s Manual Model DY Vortex Flowmeter (Integral Type, Remote Type) Model DYA Vortex Flow Converter (Remote Type) FOUNDATION Fieldbus Communication Type Manual Change No.14-013V-E Please use the attached
More informationFLEX Ex Thermocouple/RTD Input Module
Installation Instructions FLEX Ex Thermocouple/RTD Input Module Catalog Number 1797-IRT8 Contents For Information About See Page Important User Information 2 Module Installation 3 Installation in Zone
More informationControlNet Ex Modular Repeater Adapter & Fiber Repeater Module
1 +V 2 -V 3 +V 4 -V Installation Instructions Modular Repeater Adapter & Fiber Repeater Module (Cat No 1797-RPA, -RPFM) indicators backplane connector cover 1797-RPA Do not remove unless connecting to
More informationProcessMaster, HygienicMaster FEX300, FEX500
SM/FEX300/FEX500/FM/CSA-EN ProcessMaster, HygienicMaster FEX300, FEX500 FM / cfm Div. 1, Div. 2 Safety information for electrical equipment for potentially explosive areas in accordance with Factory Mutual
More informationInstruction Manual T-800 Series Current Transmitter. Model T-800L Model T-800LT Model T-800TT
Instruction Manual T-800 Series Current Transmitter Model T-800L Model T-800LT Model T-800TT M323 Rev G1 September 10, 2009 JOWA USA, Inc. 59 Porter Road Littleton, MA 01460-1431 USA Telephone: 978-486
More informationGeneral Specifications
General Specifications FN310 Field Wireless Multi-Protocol Module GENERAL This General Specification (GS) describes the specifications for Field Wireless Multi-Protocol Module. Combined with Field Wireless
More informationMid-West. Instrument. Model 140 Electrical Installation and Operating Instructions. Gauge Front ELECTRICAL
Mid-West Instrument BULLETIN NO. ELEC-IM140/11A Replaces ELEC-IM140-141/09A ELECTRICAL Gauges with switches have one or two SPST or SPDT hermetically sealed adjustable set point reed switch assemblies.
More informationMagnetostrictive Level Transmitter
Magnetostrictive Level Transmitter The Model KMD is an advanced, state-of-the-art, two-wire, Magnetostrictive-based level transmitter suitable for a wide range of process applications. The latest in microprocessor
More informationINSTRUCTION MANUAL. SIL 3 - SIL 2 Digital Output Loop/Bus Powered DIN-Rail Models D1040Q, D1041Q, D1042Q, D1043Q, D1040Q - D1041Q - D1042Q - D1043Q
DQ DQ DQ D3Q INSTRUCTION MANUAL SIL 3 SIL Digital Output Loop/Bus Powered DINRail Models DQ, DQ, DQ, D3Q, D* SIL 3 SIL Digital Output Loop / Bus Powered ISM SIL Applications For Safety Related System and
More informationMCR-FL-TS-LP-I-EX SIL IEC Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol
SIL IEC 6 508 Programmable Intrinsically Safe Loop-Powered Temperature Measuring Transducer With HART Protocol Data Sheet 0068_en_03 PHOENIX CONTACT 0-07-09 Description Temperature FL ϑ Universal PC programmable
More informationINSTRUCTION MANUAL. SIL 3 - SIL 2 Digital Output Loop/Bus Powered DIN-Rail Models D1040Q, D1041Q, D1042Q, D1043Q, D1040Q - D1041Q - D1042Q - D1043Q
DQ DQ DQ D3Q INSTRUCTION MANUAL SIL 3 SIL Digital Output Loop/Bus Powered DINRail Models DQ, DQ, DQ, D3Q, D* SIL 3 SIL Digital Output Loop / Bus Powered ISM SIL Applications For Safety Related System and
More informationExpert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters
Expert 1400 / Expert 3400 Submersible Hydrostatic Level Transmitters Class l, Division 1 Group A-D IIC T4 As our products are continuously improved, we reserve the right to make any change in the stated
More informationABB MEASUREMENT & ANALYTICS DATA SHEET. TB82 2-wire conductivity transmitters
ABB MEASUREMENT & ANALYTICS DATA SHEET TB8 -wire conductivity transmitters TB 8 -W I R E CON DUCT I VI T Y TR ANSMIT TE RS DS/ TB8 -E N RE V. H Measurement made easy Loop-powered transmitters that reduce
More informationSafety Instructions Proline Promass 300
XA01507D/06/EN/01.16 71327925 Products Solutions Services Safety Instructions Proline Promass 300 Class I, Zone 2 AEx/Ex na ic IIC Class I, Zone 2, AEx/Ex na nc ic IIC Class I Division 2 C US Document:
More informationDPharp Differential Pressure and Pressure Transmitters
User s Manual DPharp Differential Pressure and Pressure s Manual Change No. 12-021-2 For the products of EJX and EJA-E series with any of the following option codes, please refer to this manual change
More informationINTRINSIC SAFETY BASIC PRINCIPLES
INTRINSIC SAFETY BASIC PRINCIPLES IGNITION TRIANGLE Ignition Energy In many industrial processes, the presence of flammable materials (gases, vapours, liquids, dusts, fibres and flyings) requires the adoption
More informationLIQ_MAN_ABR_5081T-HT/Rev. L January 2015
instruction Sheet 5081T-HT LIQ_MAN_ABR_5081T-HT/Rev. L January 2015 Remote Controlled HART SMART Two-Wire Conductivity Transmitter ESSENTIAL INSTRUCTIONS Read this page before proceeding! Your purchase
More informationWhite Paper. Requirements for fieldbus equipment installed in a Zone 2 and Division 2 hazardous area environment. March 24, 2005
White Paper Requirements for fieldbus equipment installed in a Zone 2 and Division 2 hazardous area environment March 24, 2005 up Königsberger Allee 87 68307 Mannheim Germany Tel. + 49 621 776-0 Fax +49
More informationPage Type Resolution (mm) min. max. Output
Data Sheet Overview -1- Page Type Resolution (mm) min. max. Output Ind. lenght Ind. lenght 2 XM/XT-800E 5 +/- 2 400 mm 3000 mm current/voltage 6 XM/XT-825E 2.5 +/- 1 200 mm 1500 mm current/voltage 10 XM/XT-800E-PVDF
More informationAnnex 1 to Certificate of Conformity IECEx KEM X Issue No. 8 Rota Yokogawa Rotamass 3 Series Coriolis Mass Flowmeter
Description RotaMass 3 Series Coriolis Mass Flow Meter; - Integral Transmitter, Model RCCx; - Remote Converter, Model RCCF31; - Remote Converter, Model RCCR31; - Remote Detector Model RCCS3xxxx The Coriolis
More informationTransducer transmitter BILT 4 II 2(1) G. Technical Manual
GB Transducer transmitter BILT 4 II 2(1) G Technical Manual Transducer transmitter BILT 4 Contents Introduction General... 3 Ex.safety description... 4 Technical data... 5 Installation General... 6 Mechanical
More informationCyclops User s Manual
Cyclops User s Manual Revision 5.x.x March 14, 2017 Contents Background... 1 Interface... 1 Normal Operation... 1 Controller Input Type... 1 Communication... 2 Sensitivity... 3 Operating Modes... 3 Normal...
More informationD1035S INSTRUCTION MANUAL. Frequency-Pulse Isolating Repeater DIN Rail Model D1035S. D Frequency-Pulse Isolating Repeater
D1035S INSTRUCTION MANUAL FrequencyPulse Isolating Repeater DIN Rail Model D1035S D1035 FrequencyPulse Isolating Repeater ISM007910 Characteristics General Description: The single channel DIN Rail FrequencyPulse
More informationRosemount 3101, 3102, and 3105
Product Data Sheet February 2013 00813-0100-4840, Rev DA Rosemount 3101, 3102, and 3105 Ultrasonic Liquid Level Transmitters Non-contacting measurement with no moving parts Integral LCD and buttons as
More informationUser's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters
User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance
More informationAll TXI7850 products are ROHS compliant.
Features Explosion-proof NEMA 4X, IP65, Type 4 enclosure for outdoor and indoor installations. Optional tapped exhaust port vents exhaust gas. Canadian Registration Numbers (CRN) certification for all
More informationEJX and EJA-E Series Differential Pressure and Pressure Transmitters Installation Manual. Contents 1. Introduction. 3. Installation. 5.
User s Manual EJX and EJA-E Series Differential Pressure and Pressure s Installation Manual Contents 1. Introduction 1.1 For Safe Use of Product...2 1.2 Warranty...3 1.3 ATEX Documentation...4 2. Handling
More informationD1072S - D1072D INSTRUCTION MANUAL. D SIL 2 Temperature Signal Converter, Duplicator, Adder/Subtractor. Din-Rail Models D1072S, D1072D
D7S D7D INSTRUCTION MANUAL SIL Temperature Signal Converter, Duplicator, Adder/Subtractor DinRail Models D7S, D7D D7 SIL Temperature Signal Converter, Duplicator, Adder/Subtractor ISM0018 SIL Applications
More informationPROline promag 53 Division 1
XA 040D/06/en/05.01 50099923 FM+SGML 6.0 PROline promag 53 Division 1 Ex Ex documentation for the BA 053D and BA 054D operating instructions according to FACTORY MUTUAL standards documentation for the
More information1 About this manual Related documents Product description Getting started Mechanical installation...
CONTENTS PAGE 1 About this manual... 1 1.1 Related documents... 1 1.2 Product description... 1 2 Getting started... 1 3 Mechanical installation... 1 3.1 Location... 1 3.2 Mounting options... 1 CONNECTIONS...
More informationMODEL: B6U-B B6-UNIT. [2] LCD DISPLAY 0: Without 1: With
Field-mounted Two-wire Signal Conditioners B6-UNIT 8: TIIS flameproof (CE not available) Confirm selectable combinations of approval and wiring conduit types in the table. 2-WIRE UNIVERSAL TEMPERATURE
More informationIntrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments WIKA Data Sheet PE 81.51 Applications
More informationInstruction MI December Magnetic Flow System
Instruction MI 021-138 December 2015 Magnetic Flow System 2800 Series Flowtubes with an 896 or an E96 Transmitter Fault Location Guide Contents Contents...3 Figures...5 Tables...6 Introduction...7 Reference
More informationSingle-Channel Safety Barriers Series 9001
Single-Channel Safety Barriers Series 9001 > Broad product range for all standard applications in the world of automation > Flexible and space saving single and dual channel versions available > Time saving
More informationFM Control Drawing Class I Division 2 / Class I Zone 2. Compact version PROMAG 10
Hazardous Locations Class I Div. 2 Groups ABCD or Class I Zone 2 Groups IIC and Class II and III Division 1 Groups EFG W / P / E / H / D / L Notes: 1. Control room equipment shall not use or generate more
More informationMobrey Ultrasonic. MSP422, MSP400RH, and MSP900GH Level Transmitters. Product Data Sheet February 2015 IP2045, Rev EA
Mobrey Ultrasonic Product Data Sheet February 215 IP245, Rev EA MSP422, MSP4RH, and MSP9GH Level Transmitters Non-contacting measurement with no moving parts Integral LCD and push-buttons as standard for
More informationINSTRUCTION & SAFETY MANUAL
D1044S - D1044D INSTRUCTION & SAFETY MANUAL - Digital Relay Output Loop / Bus Powered DIN-Rail Models D1044S, D1044D D1044 - - Digital Relay Output ISM000-10 General Description: The single and dual channel
More informationInstallation guide 873 SmartRadar Control Unit & Antenna Unit
Installation guide 873 SmartRadar Control Unit & Antenna Unit Rev. 7 January 2006 Part no. 4416.569 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100 Fax : +31 15 2701 111 E-mail : info@enraf.nl
More informationOperating Principles
Features Explosion-proof NEMA 4X, IP65, Type 4 enclosure for outdoor and indoor installations. Optional tapped exhaust port vents exhaust gas. Canadian Registration Numbers (CRN) certification for all
More informationMZB SERIES. Intrinsically Safe Shunt Diode Safety Barriers. Phone: Fax: Web: -
MZB SERIES Intrinsically Safe Shunt Diode Safety Barriers Turck of Intrinsically Safe Shunt Diode Safety Barriers New series of Zener Barriers include a wider product range for more flexibility in more
More informationLIQ_MAN_ABR_5081P-FF-FI/Rev. D January 2015
instruction Sheet 1a-01p-ff/fi LIQ_MAN_ABR_01P-FF-FI/Rev. D January 201 FOUNDATION fieldbus Two-Wire ph/orp Transmitter ESSENTIAL INSTRUCTIONS Read this page before proceeding! Your Rosemount Analytical
More informationINSTRUCTION MANUAL. SIL 3 Switch/Proximity Detector Interface DIN-Rail Models D1034S, D1034D D1034S - D1034D
D034S D034D INSTRUCTION MANUAL SIL 3 Switch/Proximity Detector Interface DINRail Models D034S, D034D D034 SIL 3 Switch / Proximity Detector Interface ISM0053 SIL Applications For Safety Related System
More informationAT200 Magnetostrictive Level Transmitter. External mounted magnetostrictive level transmitter K-TEK Products
Data sheet DS/-EN Rev. T Magnetostrictive Level Transmitter External mounted magnetostrictive level transmitter K-TEK Products Features SIL2 Certified IEC 61508* Designed to mount externally to K-TEK KM26
More informationTF 02 / TF 02-Ex. Head mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels
TF 0 / TF 0-Ex Head mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.5 EN Input Resistance thermometer (,, wire circuit) Thermocouples
More informationEN Series Installation Manual
Pub # 007revG EN Series Installation Manual Approval Agency Controlled Document. No Changes Authorized Without Prior Agency Approval StoneL 7 US Highway 9 Fergus Falls, MN 7 USA Telephone: (8) 79-77 Fax:
More informationRosemount 5400 Series Radar Level Transmitter
Radar Level Transmitter Start Step 1: Mount the Transmitter Step 2: Connect the Wiring Step 3: Configure Confirm Configuration End HART 00825-0100-4026I www.rosemount.com 2007 Rosemount Inc. All rights
More informationInstruction MI February I/A Series Temperature Transmitters Model RTT15-H with HART 7 Protocol Model RTT15-T with HART 5 Protocol
Instruction MI 00- February 01 I/A Series Temperature Transmitters Model RTT1-H with HART 7 Protocol Model RTT1-T with HART Protocol MI 00- February 01 Contents Figures... Tables...7 1. Introduction...9
More informationMid-West. Instrument. Model 142 Electrical Installation and Operating Instructions. Gauge Front ELECTRICAL
Mid-West Instrument Model 142 Electrical Installation and Operating Instructions BULLETIN NO. ELEC. IM142/14A Supersedes ELEC. IM142/10A ELECTRICAL Gauges with switches have one or two SPST or SPDT hermetically
More information