Safety Instructions Proline Promass 300

Transcription

1 XA01507D/06/EN/ Products Solutions Services Safety Instructions Proline Promass 300 Class I, Zone 2 AEx/Ex na ic IIC Class I, Zone 2, AEx/Ex na nc ic IIC Class I Division 2 C US Document: XA01507D Safety instructions for electrical apparatus for explosionhazardous areas classified according to the National Electrical Code (NEC) and Canadian Electrical Code (CEC) 3

2

3 Proline Promass 300 XA01507D Proline Promass 300 Table of contents Associated documentation... 4 Manufacturer's certificates... 5 Extended order code... 5 Safety instructions: General... 8 Safety instructions: Installation... 8 Temperature tables... 9 Connection data: Signal circuits Endress+Hauser 3

4 XA01507D Proline Promass 300 Associated documentation All documentation is available: On the CD-ROM supplied (not included in the delivery for all device versions). Available for all device versions via: Internet: Smart phone/tablet: Endress+Hauser Operations App In the Download Area of the Endress+Hauser web site: Download This document is an integral part of the following Operating Instructions: Measuring device Documentation HART FOUNDATION Fieldbus PROFIBUS PA Modbus RS485 Promass A 300 BA01482D BA01515D BA01504D BA01493D Promass E 300 BA01484D BA01517D BA01506D BA01495D Promass F 300 BA01485D BA01518D BA01507D BA01496D Promass H 300 BA01486D BA01519D BA01508D BA01497D Promass I 300 BA01487D BA01520D BA01509D BA01498D Promass O 300 BA01488D BA01521D BA01510D BA01499D Promass P 300 BA01489D BA01522D BA01511D BA01500D Promass Q 300 BA01490D BA01523D BA01512D BA01501D Promass S 300 BA01491D BA01524D BA01513D BA01502D Promass X 300 BA01492D BA01525D BA01514D BA01503D Additional documentation: Document type Contents Documentation code Special documentation Safety instructions Control drawing Remote display and operating module DKX001 Remote display and operating module DKX001: Class I, Zone 2, Class I Division 2 SD01763D XA01513D As wanted on the nameplate. Please note the documentation associated with the device. 4 Endress+Hauser

5 Proline Promass 300 XA01507D Manufacturer's certificates Certificate number CSA Notified body CSA: Canadian Standards Association Extended order code The extended order code is indicated on the nameplate, which is affixed to the device in such a way that it is clearly visible. Additional information about the nameplate is provided in the associated Operating Instructions. Structure of the extended order code * * * * * * _ * * * * * * * * * * + A*B*C*D*E*F*G* Device type Basic specifications Optional specifications * = Spaceholder: At this position, an option (number or letter) selected from the specification is displayed instead of the placeholders. Device type The device and the device design is defined in the "Device type" section (Product root). Basic specifications The features that are absolutely essential for the device (mandatory features) are specified in the basic specifications. The number of positions depends on the number of features available. The selected option of a feature can consist of several positions. Optional specifications The optional specifications describe additional features for the device (optional features). The number of positions depends on the number of features available. The features have a 2-digit structure to aid identification (e.g. JA). The first digit (ID) stands for the feature group and consists of a number or a letter (e.g. J = test, certificate). The second digit constitutes the value that stands for the feature within the group (e.g. A = 3.1 material (wetted parts), inspection certificate). More detailed information about the device is provided in the following tables. These tables describe the individual positions and IDs in the extended order code which are relevant to hazardous locations. Endress+Hauser 5

6 XA01507D Proline Promass 300 Device type Item Order code for Selected option Description 1 Instrument family 8 Coriolis flowmeter 2 Sensor A, E, F, H, I, O, P, Q, S, X Sensor type 3 Transmitter 3 Transmitter type: 4-wire, compact version 4 Generation index B Platform generation 5, 6 Nominal diameter 1 to 350 1: 01 2: 02 to 350: 3E, 3F, 3R Nominal diameter of sensor Basic specifications Position 1, 2 Order code for "Approval" Option selected Type of protection Transmitter Sensor CS Cl.I, Div.2, Gps. A-D Cl.I, Div.2, Gps. A-D CZ Cl.I, Zone 2, AEx/Ex na nc IIC... Gc 1) Cl.I, Zone 2, AEx/Ex na IIC... Gc Cl.I, Zone 2, AEx/Ex na nc IIC... Gc 2) 1) The marking Ex na nc [ic] IIC Gc is only available for devices with order code "Output; Input 1", option HA or TA 2) The marking Ex na nc is only applicable for sensor versions without purge connection or rupture disk. Position Order code for Option selected Description 4, 5 Output, input 1 BA 4-20mA HART GA HA MA SA TA PROFIBUS PA PROFIBUS PA Ex-i Modbus RS485 FOUNDATION Fieldbus FOUNDATION Fieldbus Ex-i 6 Output, input 2 A W/o; B C D E F 4-20mA 4-20mA Ex-i Configurable I/O initial setting off Pulse/freq./switch output Pulse output, phase-shifted 6 Endress+Hauser

7 Proline Promass 300 XA01507D Position Order code for Option selected Description G H I J Pulse/freq./switch output Ex-i Relay 4-20mA input Status input 7 Output, input 3 A W/o; B C D E F G H I J 4-20mA 4-20mA Ex-i Configurable I/O initial setting off Pulse/freq./switch output Pulse output, phase-shifted Pulse/freq./switch output Ex-i Relay 4-20mA input Status input 8 Display, Operation A W/o; via communication F G 4-line, illuminated; touch control 4-line, illuminated; touch control + WLAN 17, 18 Device model A1 1 M W/o; prepared for remote display DKX001 1) O Separate, with remote display DKX001 1), 4-line, illuminated; 10m/ 30ft cable; touch control 1) DKX001 is approved according to CSA Optional specifications ID Order code for Option selected Description Jx Test, Certificate JP Ambient temperature of measuring device 50 C Cx Sensor option CA Rupture disk Cx Sensor option CH Rinse connection Endress+Hauser 7

8 XA01507D Proline Promass 300 Safety instructions: General Staff must meet the following conditions for mounting, electrical installation, commissioning and maintenance of the device: Be suitably qualified for their role and the tasks they perform. Be trained in explosion protection. Be familiar with national regulations (e.g. CEC or NEC). Install the device according to the manufacturer's instructions and national regulations. Do not operate the device outside the specified electrical, thermal and mechanical parameters. Only use the device in media to which the wetted materials have sufficient durability. Refer to the temperature tables for the relationship between the permitted ambient temperature for the sensor and/or transmitter, depending on the range of application, and the temperature classes. Modifications to the device can affect the explosion protection and must be carried out by staff authorized to perform such work by Endress+Hauser. Observe all the technical data of the device (see nameplate). LWARNING Substitution of components is not permitted. Substitution of components may impair suitability for Class I, Division 2. Safety instructions: Installation In the event of potentially explosive vapor/air mixtures, only operate the device under atmospheric conditions. Temperature: 20 to +60 C Pressure: 80 to 110 kpa (0.8 to 1.1 bar) Air with normal oxygen content, usually 21 % (V/V) If no potentially explosive mixtures are present, or if additional protective measures have been taken, the device may also be operated under non-atmospheric conditions in accordance with the manufacturer's specifications. 8 Endress+Hauser

9 Proline Promass 300 XA01507D Continuous service temperature of the connecting cable: 40 to +80 C ( 50 to +80 C for optional specification, ID Jx (Test, Certificate) = JP); but at least according to the service temperature range of the application taking into account additional influences of the process conditions (,min and,max + 20 K). Only use certified cable entries suitable for the application. Observe selection criteria as per CEC or NEC. When the measuring device is connected, attention must be paid to explosion protection at the transmitter. In potentially explosive atmospheres: Do not disconnect the electrical connection of the power supply circuit when energized. Do not open the connection compartment cover when energized. Install the transmitter circuit wiring according to Canadian Electrical Code (CEC) respective National Electrical Code (NEC) using threaded conduit or other wiring methods in accordance with articles 500 to 510. AEx/Ex na type of protection In potentially explosive atmospheres: Do not disconnect the electrical connection of the power supply circuit. Seal unused entry glands with approved sealing plugs that correspond to the type of protection. The plastic transport sealing plug does not meet this requirement and must therefore be replaced during installation. Only use certified cable entries or sealing plugs. The metal sealing plugs supplied meet this requirement. When operating in Zone 2 type of protection AEx/Ex na: Ensure that temporary interference does not cause the maximum operating voltage to be exceeded by more than 40 % (see nameplate). Intrinsic safety Observe the guidelines for interconnecting intrinsically safe circuits (e.g., Proof of Intrinsic Safety). Potential equalization Integrate the device into the local potential equalization. If the ground connection has been established via the pipe as specified, it is also possible to integrate the sensor into the potential equalization system via the pipe. Temperature tables Ambient temperature Minimum ambient temperature: = 40 C Endress+Hauser 9

10 XA01507D Proline Promass 300 Maximum ambient temperature: = +60 C depending on the medium temperature and temperature class Medium temperature Minimum medium temperature: Promass A, F, H, I, P, Q, S, X: T m = 50 C Promass E, O: T m = 40 C Promass F, Q with cryogenic temperature version (order code for "Measuring tube material", Option LA): T m = 200 C Maximum medium temperature: T m for depending on the maximum ambient temperature ( ) = The maximum permitted medium temperatures in brackets only apply if the sensor is installed in such a way that the transmitter is not mounted above the sensor and free convection can occur on all sides. Promass A Compact version Without thermal insulation T m ) ) ) ) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 195 C Promass E T m ) 115 2) ) (115 2) ) (140 3) ) (150) (150) ) 95 2) 140 3) Endress+Hauser

11 Proline Promass 300 XA01507D T m ) 140 3) (95 2) ) (140 3) ) (150) (150) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 150 C Promass F 1) T m ) 80 3) 115 4) ) ) 115 4) 170 5) ) 170 5) ) (240) 170 (240) ) 60 3) 95 4) ) ) 95 4) 160 5) ) 160 5) ) 150 6) 170 (240) 170 (240) ) 120 4) 185 5) 280 7) ) 185 5) 280 7) ) 60 3) 95 4) ) ) 95 4) 160 5) Endress+Hauser 11

12 XA01507D Proline Promass 300 1) T m ) 160 5) ) 160 6) 170 (240) 170 (240) 1) Maximum temperature range see nameplate 2) Cryogenic temperature version: T m = C 3) For sensors with type of protection Ex na nc applies: T m = 95 C 4) For sensors with type of protection Ex na nc applies: T m = 130 C 5) For sensors with type of protection Ex na nc applies: T m = 195 C 6) For sensors with type of protection Ex na nc applies: T m = 170 C 7) For sensors with type of protection Ex na nc applies: T m = 290 C Promass H T m ) 80 2) 115 3) ) ) 80 2) 115 3) 165 5) ) 165 5) ) 60 2) 95 3) 130 6) ) 130 6) ) 60 2) 95 3) 130 5) ) 130 5) ) Measuring tube material tantalum 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) Measuring tube material zirconium 5) For sensors with type of protection Ex na nc applies: T m = 195 C 6) For sensors with type of protection Ex na nc applies: T m = 150 C 12 Endress+Hauser

13 Proline Promass 300 XA01507D Promass I T m ) 95 2) ) (95 2) ) (150) (150) (150) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C Promass O T m ) 95 2) 160 3) ) 160 3) ) 160 4) 180 (205) 180 (205) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 195 C 4) For sensors with type of protection Ex na nc applies: T m = 180 C Promass P 1) T m ) 115 3) ) ) 115 3) 170 4) ) 170 4) ) 95 3) ) Endress+Hauser 13

14 XA01507D Proline Promass 300 1) T m ) 95 3) 160 4) ) 160 4) ) Maximum temperature range see nameplate 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) For sensors with type of protection Ex na nc applies: T m = 195 C Promass Q 1) T m ) 95 3) 160 4) ) 160 4) ) 60 2) 95 3) ) ) Maximum temperature range see nameplate 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) For sensors with type of protection Ex na nc applies: T m = 195 C 5) Cryogenic temperature version: T m = C Promass S T m ) 115 2) ) ) 95 2) ) ) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 14 Endress+Hauser

15 Proline Promass 300 XA01507D Promass X T m ) 95 2) 160 3) ) 160 3) (95 2) ) (160 3) ) (180) (180) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 180 C Promass A With thermal insulation according to Endress+Hauser specifications For information on the thermal insulation of the device, see the "Thermal insulation" section of the "Technical Information" document T m ) ) (130) (170 2) ) (205) (205) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 195 C Promass E T m ) 115 2) (115 2) ) (140 3) ) (150) (150) ) 95 2) 140 3) (95 2) ) (140 3) ) (150) (150) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 150 C Endress+Hauser 15

16 XA01507D Proline Promass 300 Promass F 1) T m ) 80 3) 115 4) (115 4) ) (150) (150) (150) ) 115 4) 170 5) (115 4) ) (170 5) ) (240) (240) ) 60 3) 95 4) (95 4) ) (160 5) ) (240) (240) ) 95 4) 160 5) (95 4) ) (160 5) ) (240) (240) ) 120 4) 185 5) 280 6) ) 185 5) 280 6) ) 60 3) 95 4) (95 4) ) (160 5) ) (240) (240) ) 95 4) 160 5) (95 4) ) (160 5) ) (240) (240) 1) Maximum temperature range see nameplate 2) Cryogenic temperature version: T m = C 3) For sensors with type of protection Ex na nc applies: T m = 95 C 4) For sensors with type of protection Ex na nc applies: T m = 130 C 5) For sensors with type of protection Ex na nc applies: T m = 195 C 6) For sensors with type of protection Ex na nc applies: T m = 290 C Promass H T m ) 80 2) 115 3) (115 3) ) (150) (150) (150) ) 80 2) 115 3) 165 5) (115 3) ) (165 5) ) (205) (205) ) 60 2) 95 3) 130 6) (95 3) ) (130) (150) (150) 16 Endress+Hauser

17 Proline Promass 300 XA01507D T m ) 60 2) 95 3) 130 5) (95) (130) (205) (205) 1) Measuring tube material tantalum 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) Measuring tube material zirconium 5) For sensors with type of protection Ex na nc applies: T m = 195 C 6) For sensors with type of protection Ex na nc applies: T m = 150 C Promass I T m ) 95 2) (95 2) ) (150) (150) (150) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C Promass O T m ) 95 2) 160 3) (95 2) ) (160 3) ) (205) (205) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 195 C Promass P 1) T m ) 115 3) (115) (150) (150) (150) ) 115 3) 170 4) Endress+Hauser 17

18 XA01507D Proline Promass 300 1) T m 55 (115 3) ) (170 4) ) (205) (205) ) 95 3) ) (95 3) ) (150) (150) (150) ) 95 3) 160 4) ) 160 4) (95 3) ) (160 4) ) (205) (205) 1) Maximum temperature range see nameplate 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) For sensors with type of protection Ex na nc applies: T m = 195 C Promass Q 1) T m ) 95 3) 160 4) (40) (95) (160) (205) (205) ) 60 2) 95 3) (40) (95) (150) (150) (150) 1) Maximum temperature range see nameplate 2) For sensors with type of protection Ex na nc applies: T m = 95 C 3) For sensors with type of protection Ex na nc applies: T m = 130 C 4) For sensors with type of protection Ex na nc applies: T m = 195 C 5) Cryogenic temperature version: T m = C Promass S T m ) 115 2) (115) (150) (150) (150) ) 95 2) Endress+Hauser

19 Proline Promass 300 XA01507D T m ) (95 2) ) (150) (150) (150) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C Promass X T m ) 95 2) 160 3) (95 2) ) (160 3) ) (180) (180) 1) For sensors with type of protection Ex na nc applies: T m = 95 C 2) For sensors with type of protection Ex na nc applies: T m = 130 C 3) For sensors with type of protection Ex na nc applies: T m = 180 C With thermal insulation without Endress+Hauser specifications 1 A B 1 Position of the reference point for temperature measurement A Standard version B Extended temperature version, cryogenic temperature version, hightemperature version 1 Reference point A Endress+Hauser 19

20 XA01507D Proline Promass 300 T m Endress+Hauser

21 Proline Promass 300 XA01507D Connection data: Signal circuits The following tables contain specifications which are dependent on the transmitter type and its input and output assignment. Compare the following specifications with those on the nameplate of the transmitter. Terminal assignment Transmitter: supply voltage, input/outputs HART Supply voltage Input/output 1 Input/output 2 Input/output 3 1 (+) 2 ( ) 26 (+) 27 ( ) 24 (+) 25 ( ) 22 (+) 23 ( ) Device-specific terminal assignment: adhesive label in terminal cover. FOUNDATION Fieldbus Supply voltage Input/output 1 Input/output 2 Input/output 3 1 (+) 2 ( ) 26 (A) 27 (B) 24 (+) 25 ( ) 22 (+) 23 ( ) Device-specific terminal assignment: adhesive label in terminal cover. PROFIBUS PA Supply voltage Input/output 1 Input/output 2 Input/output 3 1 (+) 2 ( ) 26 (B) 27 (A) 24 (+) 25 ( ) 22 (+) 23 ( ) Device-specific terminal assignment: adhesive label in terminal cover. Modbus RS485 Supply voltage Input/output 1 Input/output 2 Input/output 3 1 (+) 2 ( ) 26 (B) 27 (A) 24 (+) 25 ( ) 22 (+) 23 ( ) Device-specific terminal assignment: adhesive label in terminal cover. Endress+Hauser 21

22 XA01507D Proline Promass 300 Remote display and operating module DKX001 1 Vcc Gnd A 83 B Vcc Gnd A B A Remote display and operating module DKX001 2 Connecting cable 3 Measuring device Safety-related values Order code for "Output; input 1" Option BA Output type Current output 4 to 20 ma HART U N = 30 V U M = 250 V Safety-related values "Output; input 1" 26 (+) 27 ( ) Option GA PROFIBUS PA U N = 32 V U M = 250 V Option MA Modbus RS485 U N = 30 V U M = 250 V Option SA FOUNDATION Fieldbus U N = 32 V U M = 250 V Order code for "Output; input 2"; "Output; input 3" Option B Option D Output type Current output 4 to 20 ma User configurable input/output Safety-related values Output; input 2 Output; input 3 24 (+) 25 ( ) 22 (+) 23 ( ) U N = 30 V U M = 250 V U N = 30 V U M = 250 V 22 Endress+Hauser

23 Proline Promass 300 XA01507D Order code for "Output; input 2"; "Output; input 3" Option E Output type Pulse/frequency/ switch output Safety-related values Output; input 2 Output; input 3 24 (+) 25 ( ) 22 (+) 23 ( ) U N = 30 V U M = 250 V Option F Double pulse output U N = 30 V U M = 250 V Option H Relay output U N = 30 V I N = 100 ma DC/500 ma AC U M = 250 V Option I Current input 4 to 20 ma U N = 30 V U M = 250 V Option J Status input U N = 30 V U M = 250 V Intrinsically safe or NIFW values Order code for "Output; input 1" Output type Intrinsically safe or NIFW values "Output; input 1" 26 (+) 27 ( ) Option HA PROFIBUS PA Ex i AEx ic, Ex ic, NIFW U i = 32 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf Option TA FOUNDATION Fieldbus Ex i AEx ic, Ex ic, NIFW U i = 32 V l i = 570 ma P i = 8.5 W L i = 10 µh C i = 5 nf Endress+Hauser 23

24 XA01507D Proline Promass 300 Order code for "Output; input 2"; "Output; input 3" Output type Intrinsically safe or NIFW values Output; input 2 Output; input 3 24 (+) 25 ( ) 22 (+) 23 ( ) Option C Current output 4-20 ma Ex i U i = 30 V l i = 100 ma P i = 1.25 W L i = 0 C i = 0 Option G Pulse/frequency/ switch output Ex i U i = 30 V l i = 100 ma P i = 1.25 W L i = 0 C i = 0 Remote display DKX001 Basic specification, position 1, 2 Approval Terminal assignment Basic specification, position 8 Display; Operation Option O Option CS, CZ 81, 82, 83, 84 U n = 3.3 V I n = 150 ma 24 Endress+Hauser

25

26

27

28