Series PHD/Pendant Hand-held with E-Stop(2-Contacts) / Enable SW / Push Button SW capability

Size: px
Start display at page:

Download "Series PHD/Pendant Hand-held with E-Stop(2-Contacts) / Enable SW / Push Button SW capability"

Transcription

1 Series PHD/Pendant Hand-held with E-Stop(-Contacts) / Enable SW / Push utton SW capability FETURES New! -Contacts E-Stop SW (-Options are pre-wired) selection of wiring either or available New! Durable thick-wall case & reliable thread mold with brass inserts New! Durable thick multiplier & axis selector lue SW's New! Push utton SW's by IDEC (Sold Separately) Linedriver and TTL outputs (Point to point) IP, NM enclosure protection Std. ft.extended spiral cable Std. Magnets attached in rear Circular Plastic Connector kits-size & Size 3 available CW OUTPUT WVE FORMS LS3 or equivalent Recommended line receiver: LS3 L Q Q US $0.00 S.R.P. List Price VH VL Relation between output signals and click stop position. OUTPUT CIRCUIT SPECIFICTIONS Electrical Outputs Line Driver TTL Voltage Output for FNUC Pulse per Revolution 00 PPR Supply Voltage v±0. v dc v±0. v dc Output Voltage (VH). v.0 v Output Voltage (VL) 0. v 0. v Current Requirement 0 m (No Loading) Sink Current 0 m Output Capacity Sync. Current: 0 m, Residual Voltage: 0. v Phase Difference Quadrature Square Wave & : 90 ± (T/±T/8) Rise/Fall Time µs Frequency Response khz Insulation Resistance 0 MΩ t 00 v dc Megger (Circuit-ody) Spiral Cable ft. extended, pol., - WG Mechanical Dial Rotating Speed 00 r/min.-max., 00 r/min.-normal (Continuous) Starting Torque ozf-in (30 gf-cm) at C Rotational Life 0x bits turns at 00 rpm Weight 3 lbs (. kg) Environmental Operating Temperature 0 to 0 C Humidity RH 3% to 90% no condensation Storage Temperature 0 to 80 C Vibration G Shock 0.G Enclosure IP/NEM Rotary Switch (PTP, Step ngle 30 Degree) Max. Voltage 30 v dc Current / Switch Life 0 m /,000 cycles Emergency Stop Switch (Omron,, E-S-0) DC Load Resistance 30 vdc,.0 OMRON # E-S-0 Enable Switch (Dailywell,, PSMCES-) DC Load Resistance 0 vdc, 00 m Dailywell # PSMCES- 08 World Encoders, Inc. Renton, W 980 US

2 Series PHD / Pendent Hand-Held / xis / With E-Stop (-Contacts) / Enable SW NUMER SPECIFICTION LIST PHD-00-E--L PHD-00-E--L-EN (w/push utton SW capability) PHD-00-E--T-EN (For FNUC w/push utton SW capability) 00 Pulse, DC, Linedriver Output, E-Stop SW, Rear Magnets Two () Mode Switches. ( axis and multiplier) m ( ft.) Spiral Cable 00 Pulse, DC, Linedriver Output, E-Stop SW, Enable SW, Rear Magnets Two () Mode Switches. ( axis and multiplier) m ( ft.) Spiral Cable 00 Pulse, DC, TTL Output, E-Stop SW, Enable SW, Rear Magnets Two () Mode Switches. ( axis and multiplier) m ( ft.) Spiral Cable $0.00 $0.00 $0.00 Series PHD / Pendent Hand-Held / xis / E-Stop (-Contacts) / Push utton SW NUMER SPECIFICTION LIST PHD-00-E--L-P (w/push utton SW capability) PHD-00-E--T-P (For FNUC w/push utton SW capability) 00 Pulse, DC, Linedriver Output, E-Stop SW, Push utton SW Capability. Order Separately. Rear Magnets Two () Mode Switches. ( axis and multiplier) m ( ft.) Spiral Cable 00 Pulse, DC, TTL Output, E-Stop SW, Push utton SW Capability. SW Order Separately. Rear Magnets Two () Mode Switches. ( axis and multiplier), m ( ft.) Spiral Cable $0.00 $0.00 Outline Drawings (mm) 3 08 World Encoders, Inc. Renton, W 980 US

3 Series PHD / Pendant Hand-held with E-Stop(-Contacts) / Enable SW / Push utton SW capability Push utton SW (-Sold Separately) -D.I..Work NUMER SPECIFICTION LIST LM-MPWC LM-PWC Momentary Push utton SW -IDEC, Hole dia mm, SW dia -8 mm. Direct replacement for our previous Deca #DLMR comes with One() set -() flying 3" wires w/-pin conn. on the end lternate Push utton SW-IDEC, Hole dia mm, SW dia -8 mm. Direct replacement for our previous Deca #DLR comes with One() set -() flying 3" wires w/-pin conn. on the end $0.00 $0.00 Replacement MPG for PHD-00-E- Series-lue SW s (won t fit to SW s-old Models or Plastic dials) NUMER SPECIFICTION LIST HDW-E-80-CHM Replacement MPG for Line Driver outputs such as PHD-00-E- -L, PHD-00-E--L-EN, PHD-00-E--L-P, D.I..Work $0.00 HDW--80-CHM Replacement MPG for TTL-Fanuc models outputs such as PHD- 00-E--T-EN, PHD-00-E--T-P, D.I..Work $0.00 EE-C00-0 $80.00 Replacement * m ( ft.) Spiral Cable ( wires)d.i..work* m ( ft.)-extended length. Shrinked length= approx. ft. H $.00 Replacement Two () selector SW's with PC Only for SW s replacement ---Not for lue SW's, D.I..Work PH.0-P L8cm** $.00 Two() sets 3" length flying wires w/-pin conn.on the end for your own Push utton SW's (Not World Encoders rand)**if use World Encoders Push utton SW, Not required. mp CPC Size connector kit $ "O.D., 0."I.D., 8 pos., #8-8 WG Gold Solder -#0039- Plug, 8-#0-3 Pin, 8- #9-3 Socket, -#0038- Mating Receptacle -#0-Cable oot,-#038 Cable Grip mp CPC Size 3 connector kit $ "O.D.,.0"I.D., pos., #0- WG Gold Solder -#003-Plug, -#8- Pin, - #83- Socket, -#0038-Mating Receptacle, -#038-8 Cable Clamp, -#CF0M-K Strain Relief 08 World Encoders, Inc. Renton, W 980 US

4 Wiring Diagram- Line driver output (-Options are pre-wired) PHD-00-E--L PHD-00-E--L-P Handwheel 00 Pulses RS (ihdw-e-80) rown Handwheel 00 Pulses RS (ihdw-e-80) rown RS RS (E-S-0) EMG- EMG- -OPTION EMG- EMG- /lack /lack /lack lack/ (E-S-0) EMG- EMG- -OPTION EMG- EMG- /lack /lack /lack lack/ lue/ lue/ xis (RS N) (RS N) x x x0 x00 Light lue lack / rown/ / /lack xis (RS N) (RS N) x x x0 x00 Light lue lack / rown/ / /lack x00 x00 /lack P (LM-MPWC) 3 P /lack /lack / P (LM-MPWC) 3 P COM P /lack / P COM / / PHD-00-E--L-EN Handwheel 00 Pulses RS (ihdw-e-80) rown RS (E-S-0) EMG- EMG- -OPTION EMG- EMG- /lack /lack /lack lack/ Enabling Switch (Dailywell) (PSMCES-) En- lue/ 3 En- xis (RS N) Light lue lack / (RS N) x x x0 x00 rown/ / /lack x00 P (LM-MPWC) 3 P /lack P COM /lack P (LM-MPWC) 3 P / P COM / 08 World Encoders, Inc. Renton, W 980 US

5 Wiring Diagram- TTL(Fanuc) output (-Options are pre-wired) PHD-00-E--T-P PHD-00-E--T-EN Handwheel 00 Pulses Handwheel 00 Pulses (ihdw--80) (ihdw--80) rown rown (E-S-0) EMG- EMG- -OPTION EMG- EMG- /lack /lack /lack lack/ (E-S-0) EMG- EMG- -OPTION EMG- EMG- /lack /lack /lack lack/ lue/ Enabling Switch (Dailywell) En- lue/ (PSMCES-) 3 En- xis (RS N) Light lue lack xis (RS N) Light lue lack / / (RS N) x x x0 x00 rown/ / /lack (RS N) x x x0 x00 rown/ / /lack x00 x00 P (LM-MPWC) 3 P /lack P (LM-MPWC) 3 P /lack P COM /lack P COM /lack P (LM-MPWC) 3 P / P (LM-MPWC) 3 P / P COM P COM / / 08 World Encoders, Inc. Renton, W 980 US

Series 291 Optical Encoder

Series 291 Optical Encoder Electrocomponents Series 9 Optical Encoder Data Sheet Precision, Long-life Compact mm Size Optical Encoder Features Package Size ( X X 7 mm) Million life cycles (No detent) Million life cycles (With detent)

More information

Universal Radius Mounting Option. Fixed Radius Mounting Option

Universal Radius Mounting Option. Fixed Radius Mounting Option F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA

More information

TRD-J Series Incremental Encoders

TRD-J Series Incremental Encoders Series Incremental Encoders Features mm thick shaft and ø5 mm body Vibration and shock resistant metal slit plate durable at 1, P/R Operating voltage ranging from 4.75 to 3 VDC Totem-pole output facilitating

More information

NPN PNP NPN PNP NPN PNP

NPN PNP NPN PNP NPN PNP Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

More information

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting

More information

Incremental Rotary Encoder E6B2

Incremental Rotary Encoder E6B2 Incremental Rotary Encoder General-Purpose Rotary Encoder Withstands arge Shaft oads Wide variety of supply voltages and output forms Easy-to-adjust zero index (phase Z) with origin indicating function

More information

Rotary Measurement Technology Incremental Encoders

Rotary Measurement Technology Incremental Encoders -20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

847H. Description. Features. Specifications

847H. Description. Features. Specifications 847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536

More information

Power supply voltage Output configuration Output code Resolution (pulses/rotation) Connection method Model

Power supply voltage Output configuration Output code Resolution (pulses/rotation) Connection method Model 60-mm-dia. Encoder Rugged Encoder for High-precision Detection of Automatic Machine Timing Rugged construction with the highest shaft loading. Radial: 120 N, Thrust: 50 N IP65f water- and oil-proof construction.

More information

sealed mini usb connectors

sealed mini usb connectors QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

More information

Encoder - Absolut 2RMHF-SSI

Encoder - Absolut 2RMHF-SSI Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical

More information

Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder

Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder DRC Encoder Up to 1250 line count disc Chrome on glass disc +/- 45 arc sec accuracy Optional internal 2X, 5X, or 10X cycle interpolation

More information

Absolute Rotary Encoder

Absolute Rotary Encoder Absolute Rotary Encoder Use the Tough (Rated IP64 for Degree of Protection) Combined with a PLC or Cam Positioner for Optimum Control and Ease-of-Use Incorporates a sealed bearing, meeting IP64 for durability

More information

Measuring systems. 6/2 Built-on optoelectronic rotary encoders 6/2 Introduction

Measuring systems. 6/2 Built-on optoelectronic rotary encoders 6/2 Introduction Siemens AG 2008 Measuring systems /2 Built-on optoelectronic rotary encoders /2 Introduction /2 Incremental encoders /3 TTL (RS 422) /3 sin/cos 1 V pp /3 HTL /3 TTL (RS 422) double-track / Absolute encoders

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

JR12 Jam Nut Mount Optical Encoder

JR12 Jam Nut Mount Optical Encoder Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions

More information

DG 60 L Incremental Encoder

DG 60 L Incremental Encoder Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square

More information

Incremental Encoder Model: FOI58

Incremental Encoder Model: FOI58 Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

More information

TRD-J Series Incremental Encoders

TRD-J Series Incremental Encoders Series Encoders eatures ong-lasting disign of mm shaft in ø5mm body. urable metal slit plate. Protection degree IP5 (dust proof) or IP65 (dust and splash proof). Wide voltage ranging from 4.75 to 3 VC.

More information

SGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit.

SGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit. Rotary s Model Designations - mini Series st+nd digits 3rd digit th digit th digit 6th digit 7th digit st+nd digits Rated Output th digit Design Revision Order 7th digit Options Code Code Code B3 3.3 W

More information

Ordering Information. Application Example. New General-purpose Incremental. Rotary Encoder

Ordering Information. Application Example. New General-purpose Incremental. Rotary Encoder Rotary Encoder New General-purpose Incremental Rotary Encoder A wide operating voltage range of 5 to 24 VDC (open collector model). Resolution of 2,000 pulses/revolution in 40-mm housing. can be adjusted

More information

Incremental hollow shaft encoder BRIH EcoMag

Incremental hollow shaft encoder BRIH EcoMag Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply

More information

Encoders. Up-to-date price list: FREE Technical Support:

Encoders. Up-to-date price list:  FREE Technical Support: Up-to-date price list: www.automationdirect.com/pricelist FREE Technical Support: www.automationdirect.com/support FREE Videos: www.automationdirect.com/videos FREE Documentation: www.automationdirect.com/documentation

More information

Material: Weight: Shaft Loads:

Material: Weight: Shaft Loads: Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating

More information

Data Sheet for Angle Sensors

Data Sheet for Angle Sensors Up to 1024 pulses / 360 2 channels + index pulse Outputs TTL-compatible or as option linedriver Supply voltage 5 VDC Fast and simple to install, less than 19mm installation depth Upper limit frequency

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

Resolution (divisions) 256, 360, , 360, 720, 1,024 Pre-wired Model

Resolution (divisions) 256, 360, , 360, 720, 1,024 Pre-wired Model Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-4797575 Fax : 011-4797574 E-mail : sales@ashalain.com Absolute 60-mm-dia.

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Optical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features

Optical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder

More information

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.

.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71. SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life

More information

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features. The RBK Series is a motor and driver package

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features. The RBK Series is a motor and driver package Stepping Motors RoHS-Compliant Stepping Motor and Package RBK Series dditional Information Technical reference Page F-1 Safety standards Page G- The RBK Series is a motor and driver package (Terminal box

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Absolute encoders - SSI

Absolute encoders - SSI with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

More information

Supply voltage Output configuration Resolution (P/R) Model 12 to 24 VDC Complementary output 100, 200, 360, 500, or 600 E6F-CWZ5G 1,000

Supply voltage Output configuration Resolution (P/R) Model 12 to 24 VDC Complementary output 100, 200, 360, 500, or 600 E6F-CWZ5G 1,000 Incremental 60-mm-dia. Rotary Encoder E6F-C The Strongest Shaft for Tough Jobs The strongest shaft of any OMRON Incremental Encoder (120 N in the radial direction and 50 N in the thrust direction). Water-

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional

More information

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface

Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

Optical Kit Encoder Page 1 of 5. Description. Features

Optical Kit Encoder Page 1 of 5. Description. Features Description Page 1 of 5 The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount

More information

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

MODEL S15 Incremental Optical Rotary Encoder

MODEL S15 Incremental Optical Rotary Encoder MODEL S15 Incremental Optical Rotary Encoder Up to 200 KHz frequency response all channels Small compact size: 1.51 diameter 1.00 dia. Bolt circle mount Resolutions up to 12,500 cycles / revolution ( 50,000

More information

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors. SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,

More information

Incremental Rotary Encoder

Incremental Rotary Encoder Incremental Rotary Encoder Industrial Strength Encoder Meets World-Class Standards Drip-proof construction Shaft withstands heavy loads, 5 kgf radially, 3 kgf thrust (axially) Short circuit protection

More information

Phone: Fax: Web: -

Phone: Fax: Web:  - ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just

More information

TRD-N/NH Series Incremental Encoders

TRD-N/NH Series Incremental Encoders /N Series Encoders TRD-K TRD-K A TRD-GK TRD-J /N TRD-2E TRD-S/S Features Shaft and ollow Shaft type are available. Compact body with 5mm diameter and 35mm depth. Wide range of resolution from 1 to 2,5P/R.

More information

TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS

TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS BRUSHLESS TECHNOLOGY FEATURES AND BENEFITS Synchronous brushless servomotor, permanently excited Rated output power from 60W to 800W Maximum servomotor speed

More information

Largest Selection of Optical Encoders

Largest Selection of Optical Encoders Value & Technology Largest Selection of Optical Encoders Rotary Incremental Shaft Size 15, 20, 25 & 30 Hollow Shaft, Wheeled, Qube 2.25" & bsolute Encoders. Manual Pulse Generators & Pendant Hand-Helds.

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

Incremental Rotary Encoder

Incremental Rotary Encoder Incremental Rotary Encoder IP64 Drip-proof Construction (IP65f for ) The incorporates a rubber-seal bearing cover of IP64 dripproof construction thus ensuring ease of use in places with water dripping

More information

J1 Line APPLICATION FEATURES DESCRIPTION RUGGED-DUTY SHAFTED ENCODERS

J1 Line APPLICATION FEATURES DESCRIPTION RUGGED-DUTY SHAFTED ENCODERS J1 Line RUGGED-DUTY SHAFTED ENCODERS APPLICATION Joral rugged-duty encoders are perfect for use in harsh applications where dirt, moisture, vibration and shock are factors, such as off-road vehicles, conveyors,

More information

QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW

QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole

More information

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features

RoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features Stepping s RoHS-Compliant -Phase Stepping and Package RBK Series dditional Information Technical reference Page F- Safety standards Page G- The RBK Series is a motor and driver package consisting of a

More information

Incremental encoders 6

Incremental encoders 6 Incremental encoders ELECTRONIC GmbH Incremental encoders 6 6.1 Explanatory notes...6-3 6.2 Functional description...6-4 6.3 Applications...6-5 6.4 Assembly examples...6-6 6.5 Alternative designs...6-8

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

W(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output

W(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output W(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output Position and Velocity Sensor for Long Ranges Protection Class IP50 Measurement Range: 0... 10000 mm to 0... 15000 mm 0...

More information

Setting Standards Connectors M 16

Setting Standards Connectors M 16 Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

More information

SHAFTED ROTARY POSITION SENSORS

SHAFTED ROTARY POSITION SENSORS J8 / J0 / J0 / J30 Shafted ; Brief / of 2 Joral REF S; I / J LINE ENCODERS Joral manufactures shafted rotary position sensors for the market of controls, power equipment, hydraulics, and off road vehicles.

More information

PRELIMINARY RE36 SERIES MAGNETIC ENCODER

PRELIMINARY RE36 SERIES MAGNETIC ENCODER RE6 SERIES MGNETIC EODER The RE6 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing machines. magnet is mounted

More information

TA Series. Analog And Non-Indicating Type, PID Control, Set Temperature By Dial. Features. Ordering Information TA S B 4 R P 4 C

TA Series. Analog And Non-Indicating Type, PID Control, Set Temperature By Dial. Features. Ordering Information TA S B 4 R P 4 C T Series nalog nd Non-Indicating Type, PID Control, Set y Dial Features Improved control performance with built-in microcomputer dopting new uto-tuning PID control algorithm : Selectable ON/OFF, PID control

More information

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85 Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit

More information

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Z500. High-Precision Sensor that Measures and Displays an Object's Profile. Profile Measuring System

Z500. High-Precision Sensor that Measures and Displays an Object's Profile. Profile Measuring System Profile Measuring System High-Precision Sensor that Measures and Displays an Object's Profile. Features OMRON's original line beam method provides a complete solution to profile measurement problems. Conventional

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Datasheet MIL-C-5015 series connectors

Datasheet MIL-C-5015 series connectors Datasheet MIL-C-5015 series connectors Page 1 of 16 MIL-C-5015 series connectors Brief Introduction Specification How To Order Contact Arrangements Product Outline Dimensions Cut Dimension Brief Introduction

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of

More information

New Servo Concept: Junma

New Servo Concept: Junma New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter

More information

HD - Incremental Encoders

HD - Incremental Encoders Phased Array Sensor for Reliable Signal Output Rugged Design Withstands up to 400g Shock Unbreakable Code Disc up to 5000PPR Improved Seal Design for Increased Moisture Resistance NUMBER OF PULSES 0001

More information

General-Purpose Photoelectric Sensors with Self-Contained Amplifier

General-Purpose Photoelectric Sensors with Self-Contained Amplifier General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental

More information

Magnetic absolute single-turn encoder BMSH MAGRES parallel

Magnetic absolute single-turn encoder BMSH MAGRES parallel Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC

More information

JRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation)

JRQ2 ENCODER POSITION TRANSMITTER MODEL. Plug-in Signal Conditioners M-UNIT. (field-programmable; built-in excitation) Plug-in Signal Conditioners M-UNIT ENCODER POSITI TRANSMITTER (field-programmable; built-in excitation) MODEL JRQ MODEL & SUFFIX CODE SELECTI JRQ MODEL SELECTI Open collector Voltage pulse RS- line driver

More information

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING

More information

TECHNICAL DATASHEET Incremental Encoder RI 30

TECHNICAL DATASHEET Incremental Encoder RI 30 Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,

More information

Measuring systems. 7/2 Overview. 7/3 Built-on optoelectronic rotary encoders 7/3 Introduction

Measuring systems. 7/2 Overview. 7/3 Built-on optoelectronic rotary encoders 7/3 Introduction Siemens AG 2010 Measuring systems /2 Overview /3 Built-on optoelectronic rotary encoders /3 Introduction /4 Incremental encoders /4 sin/cos 1 V pp /4 RS 422 (TTL) /4 HTL /4 RS 422 (TTL) double-track /

More information

Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000

Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000 CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical

More information

Features. Applications

Features. Applications AEDC-55xx / AEDC-56xx High Resolution Two or Three Channel Quick Assembly Encoders With Connector Latch Data Sheet Description The AEDC-5xxx series encoders, while similar to the industry standard HEDS-5xxx

More information

P3-19 Series Connectors For Entertainment Lighting

P3-19 Series Connectors For Entertainment Lighting Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully

More information

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

Integrated servo motor

Integrated servo motor R88E-AECT@, R88S-EAD@ Integrated servo motor Motor and drive integrated for space optimization Wide range of motors from 2.55 Nm to 25 Nm 3000 rpm rated speed Peak torque 300% of rated torque IP65 protection

More information

L25 Incremental Optical Encoder

L25 Incremental Optical Encoder L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output

PMIS2 POSIMAG Magnetoresistive Position Sensor with Incremental Output PMIS2 POSIMAG with Incremental Compact Sensor for Industrial Applications Sensor PMIS2 Non contact Robust Fast Protection class IP67 Incremental encoder output Reference pulse Specifications Incremental

More information

Rotary Measuring Technology

Rotary Measuring Technology SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,

More information

EM2. Transmissive Optical Encoder Module Page 1 of 7. Description. Features

EM2. Transmissive Optical Encoder Module Page 1 of 7. Description. Features Description Page 1 of 7 The EM2 is a transmissive optical encoder module designed to offer 2x or 4x higher resolution than the EM1 encoder module. This module is designed to detect rotary position when

More information

Temposonics. Magnetostrictive Linear Position Sensors. ER Start / Stop Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. ER Start / Stop Data Sheet Temposonics Magnetostrictive Linear Position Sensors ER Start / Stop Compact sensor model Operating temperature up to +75 C (+167 F) Ideal for flexible mounting MEASURING TECHNOLOGY The absolute, linear

More information

RM36. Rotation sensors RM36 Absolute rotary encoder

RM36. Rotation sensors RM36 Absolute rotary encoder Rotation sensors RM36 Absolute rotary encoder RM36 Description The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design removes

More information

3Specifications CHAPTER THREE IN THIS CHAPTER

3Specifications CHAPTER THREE IN THIS CHAPTER CHAPTER THREE 3Specifications IN THIS CHAPTER Drive Specifications SM and NeoMetric Motor Specifications SM and NeoMetric Motor / Curves SM and NeoMetric Motor Dimensions SM and NeoMetric Encoder Specifications

More information

Temposonics. Magnetostrictive Linear Position Sensors. ER SSI Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. ER SSI Data Sheet Temposonics Magnetostrictive Linear Position Sensors ER SSI Compact sensor model Operating temperature up to +75 C (+167 F) Ideal for flexible mounting MEASURING TECHNOLOGY The absolute, linear position

More information

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24 Ø0mm Shaft Magnetic Multi-Turn Absolute Type Diameter Ø0mm Shaft Type Magnetic Multi-Turn Absolute otary Encoder Features Higher resistant to vibration and impact by magnetic elements than optical encoder

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HRPG Series Miniature Panel Mount Optical Encoders Data Sheet Description

More information

SRS SEALED ROTARY SENSORS

SRS SEALED ROTARY SENSORS SRS SEALED ROTARY SENSORS Innovation In Motion INNOVATION IN MOTION Penny+Giles SRS280 sealed rotary sensors and SRS880 submersible rotary sensors have been specially developed to provide maximum performance

More information

Temposonics. Magnetostrictive Linear Position Sensors. EP / EL Analog Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. EP / EL Analog Data Sheet Temposonics Magnetostrictive Linear Position Sensors EP / EL Analog For standard applications Position measurement with more than one magnet Ideal for limited installation space MEASURING TECHNOLOGY The

More information

Mounting M12 x 1 EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles

Mounting M12 x 1 EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles PRDS1 Magnetic Angle Encoder with Incremental Output Magnetic angle encoder 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69 Incremental encoder output Stainless steel housing

More information

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096

More information

COMPACT 700 SERIES ENCODERS FOR DRIVES

COMPACT 700 SERIES ENCODERS FOR DRIVES COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be

More information