Data Sheet for Angle Sensors
|
|
- Ami Chandler
- 6 years ago
- Views:
Transcription
1 Up to 1024 pulses / channels + index pulse Outputs TTL-compatible or as option linedriver Supply voltage 5 VDC Fast and simple to install, less than 19mm installation depth Upper limit frequency 100 khz The series SPM is available with higher operational torque (manual feeling) together with IP 55M/IP66S protection grade from shaft side. Thus SPM is especially suitable as panel encoder for manual settings. In comparison to series SPM the series SPNTM offers a low operational torque with IP40 protection grade from shaft side. SPNTM is primary made for sensor applications. Electrical Data Number of pulses Output channels Output electronics SPM / SPNTM 50, 96, 100, 200, 256, 360, 400, 500, 512,1000, 1024 Imp./ev.,, Z (Z not available for 96 Imp./ev. and1024 Imp./ev.) TTL or as an option linedriver Supply voltage 5 VDC +/-10 % Current consumption (no load) 2 channels / typ. 17 m 3 channels //Z typ. 57 m Output voltage IOH Output voltage IOL Max. output current per channel Limit frequency Min. 2.4 V (2 channels /: IOH = -40 µ max., 3 channels //Z: IOH = -200 µ max.) Max. 0.4 V (2 channels /: IOL = 3,2 m, IOL 3 channels 3,86 m) 5 m 100 khz Mechanical and Environment Data SPM SPNTM Max. operational speed Operational torque Max. allowed axial load Max. allowed radial load Life time shaft bearing 1.) Fastening torque mounting nut Protection grade front side (IEC 60529) Protection grade rear side (without solder or clamping terminals) 0.3 Md 1.3 Ncm (@ T/ ca. 4 U/ min bzw. ca. 25 /s) IP55M, IP66S (IP protection grade is ensured until shaft movements) 100 rpm (<1 min. 800 rpm) 1 N 1 N > 100 Mio. shaft rotating movements 5 Nm Operating temperature range C Storage temperature range C Shaft bearing Material housing Material shaft Material encoder disc Mass (product without option N or ST) IP40 Sleeve bearing Thermoplastic / bronze Stainless steel Thermoplastic app. 25 g 0.1 Md 0.6 Ncm (@ T/ ca. 4 U/ min bzw. ca. 25 /s) IP40 (IP protection grade is ensured until 100 Mio. shaft rotating movements) Page: 1 of 7
2 Mechanical and Environment Data Vibration proof (IEC , Test Fc) ±1,5 mm / 20 g / 10 bis 2000 Hz / 16 frequency cycles (3 x 4 h) Shock proof (IEC 68-27, Test Ea) 50 g / 11 ms / half-sine (3 x 6 shocks) Humidity 90 % F no dewing Fastening parts included in delivery Hex nut F14, tooth washer 1.) Determined by climatic conditions according to IEC 68-1, para without load collectives Page: 2 of 7
3 Order Code Description Series SPM, SPNTM SPM: Operational torque 0.3 Md 1.3 Ncm (manual feeling), protection class from shaft side IP66S, IP55M SPNTM: Operational torque 0.1 Md 0.6 Ncm (smooth feeling), protection class from shaft side IP40 Shaft diameter, shaft length: Shaft diameter Ø 6 mm, shaft length 20.3 mm Option: user defined shaft [mm] Ø 6,35mm Selection: standard=black/bold, possible options=grey/cursive SPM SPNTM 6x20,3 XxXX Pulses per revolution / number of channels 1.) The number of pulses and the number of channels are not variable, they are coupled together. : means 3 channels,, Z : means 2 channels, Option: 50 pulses, =3 channels 2.) 0050 Option: 96 pulses, =2 channels 2.) 0096 Option: 100 pulses, =3 channels 2.) 0100 Option: 200 pulses, =3 channels 2.) 0200 Option: 256 pulses, =3 channels 2.) pulses, =3 channels 0360 Option: 400 pulses, =3 channels 2.) pulses, =3 channels 0500 Option: 512 pulses, =3 channels 2.) pulses, =3 channels 1000 estellbeispiel: Option: 1024 pulses, =2 channels 2.) 1024 nforderung: Supply voltage: IP VSUP: Schutzklasse 5 V (+/- 10 wellenseitig %) IP66S/IP55M, etriebsdrehmoment 0,3 M 1,3 Ncm, Welle Ø 6,00 5 mm / chslänge 20,3mm, Optische uflösung 512 Impulse pro Umdrehung, 3 Spuren, Elektrischer usgang TTL, Elektrischer nschluss Kontaktstifte Output signal: eispiel TTL estellschlüssel: SPM Option: 6x20,3 Linedriver ) TTL TTL N Electrical connection: Contact pin s Option: 5 pol. socket (für 5 pol. connector with latch) 1.) Option = 3 Channels: Track, Track, Track Z (One index impulse per 360 rotation) Option = 2 Channels: Track, Track, without index impulse The number of pulses per revolution and the possible number of channels can not be chosen arbitrarily. For example it is not possible to get the optical resolution 1024ppr together with index track Z. 2.) This option is only available with minimum order quantity Order example: equirement: Operational torque requirement with manual feeling (increased torque) - for example for usage in a panel encoder application, shaft diameter Ø 6.00 mm, optical resolution 512 ppr., 3 channels (/ with Index), supply voltage 5 V, electrical output: TTL, electrical connection: contact pin s Example for order code: SPM 6x20, TTL - ST Page: 3 of 7
4 For higher quantities or on-going demand, additional options are available as described below on request For example: Tandem version with 2 independent optical discs and 2 optical modules, also with different numbers of pulses, shaft flattening all bearing instead of sleeve bearing Special shaft design. For example: change of shaft length, special shaft flattening, shaft diameters 6,35mm Other operational torque Special cable and connection design Page: 4 of 7
5 Drawing cw CW 30 ±0,5 28,6 ±1 20 ±1 D 10,3-0 0,03 GND VSUP 0,635 ±0,06(5x) 13,5 ±1 M10x0,75 Tightening torque of hex nut 5Nm ,7 ±0,5 L 3,6 ±1 2,54 ±0,15(4x) Do not connect Do not connect Standard shaft dimensions Shaft length L 20,3 mm Shaft diameter D 6 mm ecommended Drilling Pattern: 10,3 +0,03 0 9,3 ±0,5 Option ST 36,4 ± Page: 5 of 7
6 Sufficient ESD protection is necessary for the transport, assembly and operation of the encoder. PIN ssignment Series SPM, SPNTM PIN Option (2 Channels) Option (3 Channels) PIN 1 GND GND PIN 2 Do not connect! Channel Z (Index) PIN 3 Channel Channel PIN 4 VSUP VSUP PIN 5 Channel Channel ecommendations for mating connectors: Standard, contact pins (TTL output): MOLEX: KK 254 crimp housing, 5 circuits, series 2695 KK254 crimp terminals series 2759 For Option ST (with plug and TTL output): MOLEX: SL crimp housing, 5 circuits, series SL crimp terminals series For Option N (with plug and linedriver output): MOLEX: SL housing, 8 circuits, series SL crimp terminals series ecommended Output Circuit TTL (2 Channels) ecommended Output Circuit TTL (3 Channels) otary Encoder ecommended External Wiring otary Encoder ecommended External Wiring VSUP =2,7kΩ VSUP =2,7kΩ nel nel GND hannel hannel hannel Z GND Page: 6 of 7
7 Output Signals TTL (2 Channels) Sense of otation: CW (Clockwise) Output Signals TTL (3 Channels) Sense of otation: CW (Clockwise) Possible Output Signal Deviations (2 Channels) Possible Output Signal Deviations (3 Channels) 1, 2, 3, 4 = 4 ± 12 1, 2, 3, 4 = 4 ± 12 = 2 ± 12 = 2 ± 12 Φ = 4 ± 24 Φ = 4 ± 24 = 4 ± 12 Output Signals Linedriver (2 Channels) Sense of otation: CW (Clockwise) Output Signals Linedriver (3 Channels) Sense of otation: CW (Clockwise) mplitude otation mplitude Z Z otation Page: 7 of 7
Data Sheet for Angle Sensors
ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming
More informationData Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
More informationOptical encoder MEC22 HR
Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable
More informationPWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical
More informationIncremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationMagnetic Encoder MEM 22
Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed
More informationOptical Kit Encoder Page 1 of 5. Description. Features
Description Page 1 of 5 The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationData Sheet MEM 16. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com
More informationABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull Œ Short circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationUniversal Radius Mounting Option. Fixed Radius Mounting Option
F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More informationAbsolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
More informationXXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More information4 / 24,5 2,6 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05 8,1 ±0,3 2, T
DC-Micromotors Precious Metal Commutation 4, mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 4 74... SR Nominal voltage Terminal resistance Output power
More informationData Sheet MEM 22. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM 22 IE Rev.1.9 / 16.05.2017 info@pwb-encoders.com
More informationQR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
More informationElectrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
More informationNOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
More informationIXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
More informationAbsolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationMaterial: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
More informationVert-X 37-5V. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles
Version A B C Electrical Data Measuring range 0... 360 0... 360 360 Linearity see table A see table B see table C Max. hysteresis see table A see table B see table C Resolution see table A see table B
More informationRotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationTechnical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More informationMini Encoder High Resolution
Mini Encoder High Resolution PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEHR25 plug Rev.5A / 27.04.2017 info@pwb-encoders.com
More informationAbsolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
More informationDG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
More informationIncremental Shaft Encoders Industrial types
Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due
More informationEncoder WDG 50B.
Encoder WDG 0B www.wachendorffautomation.com/wdg0b Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationJR12 Jam Nut Mount Optical Encoder
Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions
More informationIncremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
More informationSE22 Mini Encoder Data Sheet 5V TTL power supply optical model
SE22 Mini Encoder Data Sheet 5V TTL power supply optical model 1 Description SE22 is a high performance, low cost, hollow shaft encoder family, very easy for assembly on shaft diameters set ranging from
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationOnline data sheet DFS60B-S4PA00S74 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60B-S4PA00S74 DFS60 A B C D E F Illustration may differ Ordering information Type Part no. DFS60B-S4PA00S74 1081183 Other models and accessories www.sick.com/dfs60 H I J K L M N O
More informationStandard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
More informationAbsolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
More informationStandard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More informationPhone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More informationOptical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features
Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationHD25. Industrial Rugged Metal Optical Encoder Page 1 of 6. Description. Mechanical Drawing. Features
Description HD25 Page 1 of 6 The HD25 is a rugged optical incremental shaft encoder designed for heavy-duty industrial applications. The housing, machined from a solid billet aluminum block and finished
More informationTechnical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More informationMIG Encoders BEGE MIG NOVA+ Your drive, our (trans)mission. BEGE Power Transmission
MIG Encoders BEGE MIG NOVA+ BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission Mounting a conventional
More informationIncremental encoders 6
Incremental encoders ELECTRONIC GmbH Incremental encoders 6 6.1 Explanatory notes...6-3 6.2 Functional description...6-4 6.3 Applications...6-5 6.4 Assembly examples...6-6 6.5 Alternative designs...6-8
More informationCOMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
More informationEncoder WDG 100H.
Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps
More informationDRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationIncremental Shaft Encoders Industrial types
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many
More informationOnline data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories
More informationCOMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
More informationTechnical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More information847H. Description. Features. Specifications
847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536
More informationFeatures & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000
CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical
More informationAbsolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
More informationAbsolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
More informationOnline data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS
Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information
More informationOnline data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi
More informationAbsolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str. 39a 53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com AE30 medium temperature range LD 1 of 9 Rev. 3.0 / 06.07.2007 Description
More informationAbsolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
More informationOnline data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
More informationABSOLUTE MAGNETIC ROTARY ENCODER ANALOG
High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Certified: By ODVA - Interface: Device Net - Housing: 58 mm - Full or hollow shaft: 6 or 0 mm / 5 mm - Max. 6556 steps per revolution (6 Bit) -
More informationRotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationEncoder WDGI 58E.
Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationFVS58 singleturn absolute encoder. FVS58. Technical Product description data Incremental encoders special designs. Technical data
absolute encoder Industrial standard housing Ø58 mm 1 Bit singleturn Output code: Gray and binary Short-circuit proof push-pull output Inputs for selection of counting direction, LATCH and PRESET Code
More informationMultiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
More informationQR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
More informationMultiturn absolute encoder
0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
More informationMultiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
More informationTECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
More informationABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationEncoder WDGI 58H.
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationABSOLUTE ROTARY ENCODER DEVICE NET
Main Features - Compact and heavy-duty industrial model - Interface: CAN according to Device Net - Housing: 8 mm - Shaft: 6 or 0 mm - Resolution: Max. 2 Bit =,,2 steps over,096 revolutions - Code: Binary
More informationOnline data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS
Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration
More informationEncoder WDG 58H.
Encoder WDG H www.wachendorffautomation.com/wdgh Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationNOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog
NOVOHALL Rotary Sensor touchless technology transmissive Series RFC4800 analog The RFC 4800 utilizes a separate magnet or magnetic position marker, attached to the rotating shaft to be measured. The orientation
More information