Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Bureau Veritas Consumer Products Services Germany GmbH Wilhelm-Hennemann-Straße 8, Schwerin Location: Bureau Veritas Consumer Products Services Germany GmbH Thurn-und-Taxis-Straße 18, Nürnberg Tests in the s: A) Electromagnetic compatibility (EMC) 1. Standards within the flexibilisation of the scope of accreditation 1.1 Basic standards 1.2 Generic standards 1.3 Product family standards 1.4 EMC in the telecommunications sector (R&TTE Art. 3.1 b) 1.5 Automotive 1.6 Procedures of foreign standards bodies 1.7 Withdrawn procedures or procedures for which more recent editions exist (but which are still referenced) 2. Standards or in-house procedures not within the flexibilisation of the scope of accreditation 2.1 Procedures of foreign organisations 2.2 Other B) Radio Standards within the flexibilisation of the scope of accreditation C) Simulation 1. Standards within the flexibilisation of the scope of accreditation 2. Standards or in-house procedures not within the flexibilisation of the scope of accreditation 2.1 Procedures of foreign organisations This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/18

2 D) Other The ing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent ing methods listed here with different issue dates. The ing laboratory maintains a current list of all ing standards / equivalent ing procedures within the flexible scope of accreditation. Title of standard or method A) Electromagnetic compatibility (EMC) 1 Standards within the flexibilisation of the scope of accreditation 1.1 Basic standards EMC EN :2009 DIN EN ; VDE :2009 EMC EN : A1: A2: 2010 DIN EN VDE : 2011 EMC EN : 2012 DIN EN ; VDE :2013 EMC EN : 2014 DIN EN VDE : 2007 EMC EN :2014 DIN EN ; VDE : EMC EN :2010 DIN EN ; VDE :2010 EMC EN :1993 +A1:2001 DIN EN ; VDE : Part 4-2: Test and measurement methods - Immunity to the discharge of statistical electricity (IEC : 2008); German version EN : 2009 Part 4-3: Test and measurement methods - Immunity to high-frequency electromagnetic s (IEC : A1: A2: 2010); German version EN : A1: A2: 2010 Part 4-4: Test and measurement methods - Immunity to fast transient electrical disturbances / burst (IEC : 2012); German version EN : 2012 Part 4-5: Test and measurement methods - Immunity against impact voltages (IEC : 2014) German version EN : 2014 Part 4-6: Test and measurement methods - Immunity to conducted disturbances induced by high-frequency s (IEC : 2013); German version EN : 2014 Part 4-8: Test and measurement methods - Immunity s against magnetic s with energy-related frequencies (IEC : 2009); German version EN : 2010 Part 4-9: Testing and measuring methods - Immunity ing against pulsed magnetic s (IEC 77B / 728 / CDV: 2015); German Version FprEN : 2015 Period of validity: to Translation - 2/18

3 EMC EN :1993 +A1:2001 DIN EN ; VDE :2001 EMC EN :2004 DIN EN VDE :2005 EMC EN :2006 DIN EN ; VDE : EMC EN : A1: A2:2016 DIN EN : ; VDE : EMC EN : Cor.:2007 DIN EN ; VDE : A1: EMC EN : A1:2009 DIN EN ; VDE 0847 Teil 4-27: EMC EN : 2014 DIN EN : ; VDE : Title of standard or method Part 4-10: Test and measurement methods - Immunity ing against damped magnetic s (IEC 77B / 730 / CDV: 2015); German version FprEN : 2015 TeTeil 4-11: Test and measurement methods - Immunity for voltage dips, short-time interruptions and voltage fluctuations (IEC : 2004); German version EN : 2004 Part 4-12: Test and measurement methods - Immunity to attenuated sinusoidal oscillations (Ringwave) (IEC : 2006); German version EN : 2006 Electromagnetic compatibility (EMC) - Part 4-13: Test and measurement methods - Immunity s on the AC mains connection against harmonics and harmonics, including conducted disturbances from the signal transmission on electrical low voltage networks (IEC : A1: A2: 2015); German version EN : A1: A2: 2016 Part 4-18: Test and measurement methods - Immunity to attenuated undulating waves (IEC ) German version EN : Cor.: 2007 Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity for equipment with input current not exceeding 16 A per phase (IEC : A1:2009); German version EN : A1:2009 Requirements for equipment and devices as well as definition of methods for the measurement of high-frequency interference (radio interference) and immunity - Part 2-1: Methods for the measurement of high-frequency interference (radio interference) and immunity - Measurement of conducted interference (CISPR Period of validity: to Translation - 3/18

4 EMC EN :2010 +A1:2010 +AC:2013+A2:2014 DIN EN : ; VDE : EMC EN : 2007 DIN EN VDE :2007 EMC EN : 2005 DIN EN VDE :2006 EMC EN : A1:2011 DIN EN ; VDE 0839 Teil 6-3: A1: EMC EN : A1:2011 DIN EN ; VDE :2011 EMC EN :2015 DIN EN ; VDE : EMC EN :2015 DIN EN : ; VDE : Title of standard or method : 2014); German version EN : 2014 Requirements for equipment and devices as well as determination of methods for the measurement of high-frequency interference (radio interference) and immunity - Part 2-3: Method for the measurement of high-frequency interference (radio interference) and immunity - Measurement of radiated interference (CISPR : A1: A2: 2014); German version EN : A1: AC: A2: Generic Standards Part 6-1: Grounding principles - immunity to interference for residential, commercial and commercial premises and small businesses (IEC : 2005); English version EN : 2007 Part 6-2: General principles - Immunity for industrial applications (IEC : 2005); German version EN : 2005 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments (IEC : A1:2010); German version EN : A1:2011 Part 6-4: Grounding principles - Grounding principle for industrial noise (IEC : A1: 2010); German version EN : A1: Product family standards Railway applications - Electromagnetic compatibility - Part 1: General information; English version EN : 2015 Railway applications - Electromagnetic compatibility - Part 4: Emissions and immunity of signaling and telecommunication equipment; English version EN : 2015 Without reverberatio n chamber and without TEM cell Period of validity: to Translation - 4/18

5 EMC EN 55011:2016 DIN EN 55011: ; VDE : EMC EN 55013: 2013+A1:2016 DIN EN 55013: ; VDE : [NEU] EMC EN :2006 +A1:2009 +A2:2011 DIN EN ; VDE :2012 EMC EN :2015 DIN EN ; VDE :2009 EMC EN 55022: 2010 DIN EN 55022; VDE : EMC EN 55024: A1:2015 DIN EN 55024; VDE :2011 EMC EN :2014 DIN EN ; VDE : EMC EN :2013 DIN EN ; VDE : EMC EN :2000 Title of standard or method Industrial, scientific and medical equipment - Radio interference - Limits and methods of measurement (CISPR 11: 2015, modified); English version EN 55011: 2016 Sound and television broadcasting receivers and related equipment of the entertainment electronics - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13: 2009, modified + AMD1: 2015, modified); English version EN 55013: A1: 2016 Electromagnetic compatibility - Requirements for household appliances, electrical tools and similar electrical appliances - Part 1: Emitted interference (CISPR 14-1: A1: Cor.: A2: 2011); German version EN : A1: A2: 2011 Electromagnetic compatibility - Requirements for household appliances, electrical tools and similar electrical equipment - Part 2: Immunity - Product family standard (CISPR 14-2: 2015); English version EN : 2015 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 22: 2008, modified); English version EN 55022: 2010 Information technology installations - Immunity characteristics - Limits and methods (CISPR 24: Cor.: A1: 2015); English version EN 55024: A1: 2015 Part 3-2: Limits - Limit values for harmonic currents (device input current <= 16 A per conductor) (IEC : 2014) Part 3-3: Limit values - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for devices with a rated current <= 16 A per conductor which are not subject to a special connection condition (IEC : 2013); English version EN : 2013 Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limiting voltage changes, voltage Measureme nt up to 20 A Period of validity: to Translation - 5/18

6 DIN EN ; VDE : EMC EN :2011 DIN EN ; VDE : EMC EN : 2011+A1:2014 DIN EN :2015; VDE : EMC EN 50155:2007 DIN EN 50155; VDE :2008 EMC EN 15194:2009+A1:201 1 DIN EN 15194: EMC EN : 2012 DIN EN ; VDE : EMC EN 55020:2007 DIN EN 55020; VDE : DIN EN 55020/A1; VDE /A10: EMC EN 55032:2015 DIN EN 55032; VDE : Title of standard or method fluctuations and flicker in public low-voltage supply networks; Devices and devices with a rated current <= 75 A, which are subject to a special connection condition (IEC : 2000); English version EN : 2000 Electromagnetic compatibility (EMC) Part 3-12: Limits - Limits for harmonic currents caused by devices and devices with an input current> 16 A and = 75 A per conductor intended for connection to public low-voltage networks (IEC : 2011); English version EN : 2011 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Requirements for the immunity of equipment for fire alarm systems, burglar alarm systems, video surveillance systems, access control systems and emergency call systems; English version EN : A1: 2014 Railway applications - Electronic equipment on railway vehicles; English version EN 50155: 2007 Bicycles - Electrically assisted wheels - EPAC bicycles Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility of equipment English version EN : A1: 2015 Sound and television broadcast receivers and related equipment of entertainment electronics - Immunity characteristics - Limits and methods (IEC / CISPR 20: 2006); English version EN 55020: 2007 Electromagnetic compatibility of multi-media devices and devices - Requirements for emitted interference (CISPR 32: 2015); English version EN 55032: 2015 per phase Measureme nt up to 20 A per phase Without TEM cell Appendix C1-8 only Without mode inverter, without GTEM cell Period of validity: to Translation - 6/18

7 EMC EN :2013 DIN EN ; VDE :2013 EMC EN : 2013 DIN EN ; VDE :2013 EMC EN : 2013 DIN EN ; VDE : 2013 EMC EN : 2013 DIN EN ; VDE : 2013 EMC EN : 2013 DIN EN ; VDE : 2013 EMC EN : 2013 DIN EN ; VDE : 2013 Title of standard or method Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (IEC : 2012); German version EN : 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test arrangement, operating conditions and performance characteristics for sensitive and measuring instruments for applications without EMC protection measures (IEC : 2012 ); German version EN : 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test arrangements, operating conditions and performance characteristics for portable, measurement and monitoring devices for use in low-voltage power supply systems (IEC : 2012); German version EN : 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test arrangement, operating conditions and performance characteristics for transducers with integrated or remote signal processing (IEC : 2012); English version EN : 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test arrangement, operating conditions and performance characteristics for insulation monitoring devices according to IEC and devices for insulation fault location according to IEC (IEC : 2012); English version EN : 2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test arrangements, operating conditions and performance characteristics for devices with bus interfaces according to IEC (IEC Period of validity: to Translation - 7/18

8 Title of standard or method 5: 2012) ; German version EN : 2013 EMC EN : 2008 DIN EN VDE : 2008; DIN EN ; VDE Berichtigung 1: EMC EN :2008 DIN EN VDE : 2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and devices intended for safety-related functions (functional safety) - General industrial applications (IEC : 2008); English version EN : 2008 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and devices intended for safety-related functions (Functional Safety) - Industrial applications in specified electromagnetic environments (IEC : 2008); German version EN : EMC in the telecommunications area (R&TTE Art. 3.1b and RED Art 3.1b) EMC ETSI V2.1.1.: Electromagnetic Compatibility (EMC) Standard for radio equipment and services; Part 1: Common technical requirements; Harmonized Standard covering the essential requirements Of article 3.1 (b) of Directive 2014/53 / EU and the essential Requirements of article 6 of Directive 2014/30/EU EMC ETSI EN V1.6.1: EMC ETSI EN V2.2.1: Electromagnetic compatibility and radio spectrum matters (ERM) Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 3: Specific conditions for short-range devices (SRD) operating on frequencies between 9 khz and 40 GHz spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems Period of validity: to Translation - 8/18

9 EMC ETSI EN V2.1.1: Title of standard or method Electromagnetic Compatibility (EMC) Repeater standard for radio equipment and services; only Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU 1.5 Automotive EMC EN 55025:2008 DIN EN 55025; VDE :2009 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats and on devices Limits and methods of measurement EMC ISO 10605:2008 +Cor.1: 2010 Road vehicles Component methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure EMC ISO :2004 Road vehicles Component methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Bulk current injection (BCI) EMC ISO :2011 Road vehicles Component methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) EMC ISO :2002 Road vehicles Component methods for electrical disturbances from narrowband radiated electromagnetic energy Part 5: Stripline EMC ISO :2007 Road vehicles - Component methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic s EMC ISO :2012 Road vehicles - Component methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable Transmitters Only Testing with broadband antennas im Bereich 360 MHz 2700 MHz Period of validity: to Translation - 9/18

10 Title of standard or method EMC ISO :2011 Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only EMC ISO :2007 Road vehicles Electrical disturbances from conduction and coupling Part 3: Vehicles with nominal 12V or 24V supply voltage Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines 1.6 Procedures of foreign standardization organizations EMC ANSI C63.022:2004 American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment EMC ANSI C ANSI C TK+EMC / USA FCC MP-5: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz Stand alone or in combination with: CFR 47 FCC Part 15, Unintentional Radiators CB Receiver Superregenerative Receiver All other receivers subject to part 15 TV interface device Cable system terminal device Class B personal computers and peripherals CPU boards and internal power supplies used with Class B personal computers Class B personal computers assembled using authorized CPU boards or power supplies FCC Methods of Measurements of Radio Noise Emissions from Industrial, Scientific, and Medical Equipment Stand alone or in combination with: CFR 47 FCC Part 18, Industrial Scientific and Medical Equipment Consumer ISM equipment TK / USA ANSI C American National Standard for Testing of Unlicensed Wireless Devices Stand alone or in combination with: Period of validity: to Translation - 10/18

11 Title of standard or method CFR 47 FCC Part 15 Intentional Radiators below 26.5 GHz - except Part 15D and Part 15E (non- DFS) Intentional Radiators KDB CFR 47 FCC Part 15 Intentional Radiators above 26.5 GHz - except Part 15D and Part 15E (non- DFS) Intentional Radiators TK / USA ANSI/TIA-603-D (2010) Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Stand alone or in combination with: - Frequency Allocations and Radio Treaty Matters - General Rules and Regulations CFR 47 FCC Part 2 - Licensed Radio Service Equipment - Commercial Mobile Services CFR 47 FCC Part 20 CFR 47 FCC Part 22 (cellular) CFR 47 FCC Part 24 CFR 47 FCC Part 27 KDB KDB General Mobile Radio Services CFR 47 FCC Part 22 (non-cellular) CFR 47 FCC Part 90 KDB Restricted procedures EMC ANSI C63.4:2009 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz EMC ETSI EN V1.2.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Repeater only Period of validity: to Translation - 11/18

12 EMC ETSI EN V1.9.2: EMC EN 55011: A1:2010 DIN EN 55011; VDE :2011 EMC EN 55013: 2013 DIN EN 55013; VDE : Title of standard or method Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment spectrum Matters (ERM) Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements Industrial, scientific and medical equipment - Radio interference - Limits and methods of measurement (IEC / CISPR 11: 2009, modified + A1: 2010); English version EN 55011: A1: 2010 Sound and television broadcast receivers and related equipment of the entertainment electronics - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13: 2009, modified); English version EN 55013: Standards or methods which are not covered by the flexibility of the accreditation area 2.1 Procedures of foreign organizations EMC ATIS :2013 American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment no electrical noise s EMC SEMI F :2006 SEMI F SPECIFICATION FOR SEMICONDUCTOR PROCESSING EQUIPMENT VOLTAGE SAG IMMUNITY EMC IACS E10 IACS Unified requirements concerning electrical installations (IACS UR_E): E10, Test Specification for Type Approval hout subdivisions 7, 8, 21 EMC TELCORDIA GR-1089-CORE, Issue06:2013 Electromagnetic Compatibility and Electrical Safety Generic Criteria for Network Telecommunications Equipment. Sec. 2; 3; 4; 10 Period of validity: to Translation - 12/18

13 EMC FprEN 55035:2012 DIN EN 55035; VDE : (Design) Title of standard or method 2.2 Other Electromagnetic Compatibility (EMC) - Immunity standard for multimedia products Without Reverberatio n Chamber and without TEM cell B) Radio 1 standards that are subject to the flexibility of the accreditation area ETSI EN V1.3.1: spectrum Matters (ERM) Additional Electromagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications EN V1.2.: ETSI EN V2.4.6: ETSI EN V2.4.1:2012 EN V2.4.1:2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiated emission ing of physically large telecommunication systems Engineering (EE) Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to MHz frequency range with power s ranging up to 500 mw; Part 1: characteristics and methods spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to MHz frequency range with power s ranging up to 500 mw; Part 1: characteristics and methods Period of validity: to Translation - 13/18

14 Title of standard or method ETSI EN V1.7.1: ETSI EN V1.8.1: ETSI EN V1.6.1: spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 1: characteristics and methods spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 1: characteristics and methods spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive ETSI EN V1.6.1:2012 ETSI EN :2010 ETSI EN V1.4.1:2010 Draft ETSI EN V ( ) spectrum Matters (ERM) Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements spectrum Matters (ERM);Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: characteristics and methods spectrum Matters (ERM);Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Period of validity: to Translation - 14/18

15 Funk/Wireless ETSI EN V1.8.1 : ETSI EN V1.7.1 : ETSI EN V7.1.1: ETSI EN V7.1.1: ETSI EN V7.1.1: EN V6.2.1: EN V5.2.1: EN V5.2.1: Title of standard or method Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements IMT cellular networks; Harmonised EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) only spurious emission only spurious emission IMT cellular networks; Harmonised EN covering only the essential requirements of article 3.2 of the spurious R&TTE Directive; Part 13: Evolved Universal emission Terrestrial Radio Access (E-UTRA) User Equipment (UE) IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) spectrum Matters (ERM) Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT- 2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive. spectrum Matters (ERM) Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 7: Harmonized EN for IMT- 2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive. only spurious emission only spurious emission only spurious emission Period of validity: to Translation - 15/18

16 Title of standard or method D) 1 standards that are subject to the flexibility of the accreditation area EN : 2007 influences - Part 2-1: Test DIN EN ; methods - Test A: Refrigeration VDE : EN : 2007 DIN EN ; VDE : EN : 2008 DIN EN ; VDE : EN : 2009 DIN EN ; VDE : EN : 2009 DIN EN ; VDE : influences - Part 2-2: Test methods - Test B: Dry heat influences - Part 2-6: Test methods - Test Fc: Swing (sinusoidal) influences - Part 2-14: Test methods - Test N: Temperature change influences - Part 2-27: Test methods - Test Ea and Guidelines: Shocks EN : 2005 DIN EN : EN : 2008 DIN EN ; VDE : EN : 2009 DIN EN ; VDE : EN : 2008 influences - Part 2-30: Test methods - Test Db: Humidity, cyclic ( hours) influences - Part 2-31: Test methods - Testing Ec: Shocks due to rough handling, mainly for equipment influences - Part 2-38: Test methods - Test Z / AD: Composite, temperature / humidity, cyclic influences - Part 2-64: Test methods - Test Fh: Swing, broadband noise Period of validity: to Translation - 16/18

17 DIN EN ; VDE : EN : 1996 DIN EN : EN : 2013 DIN EN ; VDE : Title of standard or method (digital control) and guidance audits - Part 2: Tests; Test Cy: humidity heat, constant, accelerated, preferably for components influences - Part 2-78: Test methods - Test Cab: Humidity, constant Simulation Engineering (EE) ETS : DIN EN : conditions and environmental ing for telecommunications equipment - Part 2-3: Specifications for environmental ing; Weatherproof, weatherproof EN 50155:2007 +Cor.1:2010 DIN EN VDE : Cor.1: Railway applications - Electronic equipment on railway vehicles EN 61373:2010 DIN EN VDE : KTA 3503: KTA 3505: Railway applications - Railway equipment - Shock and shock ing Type ing of electrical assemblies of safety control technology Type ing of transducers and transmitters of safety control technology Category 1 Without: Radiation resistance Preexposure to radiation Behavior under pressure, temperature Period of validity: to Translation - 17/18

18 Engineering (EE) Engineering (EE) Engineering (EE) Engineering (EE) Sound Power Measurement Title of standard or method and humidity loading Behavior with radiation exposure Standards which are not covered by the flexibility of the accreditation area 2.1 Procedures of foreign organizations TELCORDIA GR-63-CORE, Issue 4: April 2012 TELCORDIA GR-3108-Core- CORE, Issue 3: April 2013 TELCORDIA GR-487-CORE, Issue 4: February 2013 American National Standard for Telecommunication s ATIS EN ISO 3744: 2010 DIN EN ISO 3744: NEBSTM Requirements: Physical Protection Sec Temperature; Humidity and Altitude Criteria; Equipment Handling Criteria; , partly: Office and Transportation Vibration; Acoustic Noise Electromagnetic Compatibility, Electrical Safety and Environment Generic Requirements for Network Equipment in the Outside Plant (OSP). Sec. 4; 6; 7 Generic Requirements for Electronic Equipment Cabinets.Sec. 3.8 Insect Instrution; 3.32 Acoustical Noise Emission; 3.35 Impact Resistance; 3.39 Shock and Vibration Temperature, Humidity, and Altitude Requirements for Network Telecommunications Equipment Utilized in Outside Plant Environments E) Others Acoustics - Determination of the sound power and sound power s of sound sources from sound pressure measurements - Envelope surface method of accuracy class 2 for a substantially free sound over a reflecting plane no solar load, no hypobaric chamber s For measuremen ts from 52 db sound power Period of validity: to Translation - 18/18