ANSI-ASQ National Accreditation Board/ACLASS

Size: px

Start display at page:

Download "ANSI-ASQ National Accreditation Board/ACLASS"

Joseph Palmer
6 years ago
Views:

ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Advanced Compliance Solutions, Inc. 3998 Fau Blvd.

1 ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Advanced Compliance Solutions, Inc Fau Blvd., Suite 310, Boca Raton, FL Randy Abernathy, Quality Manager, Phone: Ext Sam Wismer, Vice President of, Phone: Ext Jason Gerke, Lab Manager: ING I. Electrical FIELD OF Generic Industrial Products Generic Residential Products Industrial Scientific and Medical Household Appliances, Electric Tools and Similar Lighting Valid to: March 29, 2015 Certificate Number: AT Conducted Disturbances Insertion Loss, Conducted Disturbances EN (2007) + A1: 2011 Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards Emission Standard for Industrial Environments EN (2007) + A1: 2011 Electromagnetic compatibility (EMC) - Part 6-3: Generic Standards Emission Standard for Residential, Commercial and Light Industrial environments EN 55011: A1:2010 Industrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic disturbance characteristics - Limits and methods of measurement EN :2006 +A1:2010 +A2:2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission EN 55015:2013:2007, A2:2009 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN (2006): Limits and Methods of Measurement of Disturbance Characteristics of 150 khz to 18 GHz 9 khz to 30 MHz Version 009 Issued: 11/11/2014 Page 1 of 6

2 Digital Devices Industrial, Scientific and Medical Devices Digital Devices ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart B: Unintentional Radiators FCC OST/MP-5 (1986): FCC Methods of Measurement of Noise for ISM (cited in FCC Method 47 CFR Part 18 - Industrial, Scientific, and Medical ) ICES-003 Issue 5 (2012) (ITE) Limits and methods of measurement CNS (2006) Limits and Methods of Measurement of Interference Characteristics of Agreement of Voluntary Control Council for Interference by - Technical Requirements: V-3( ) and V-4/ EN 55022:2010 technology equipment. disturbance characteristics. Limits and methods of measurement CISPR ed 2.1 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements CISPR ed 3.0 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements Version 009 Issued: 11/11/2014 Page 2 of 6

3 Unintentional / Intentional Radiators FCC AS/NZS CISPR 22: A1:2010 technology equipment disturbance characteristics Limits and methods of measurement ANSI C63.4 (2009) with FCC Method 47 CFR Part 15, Subpart B: Unintentional Radiators Unlicensed Devices ANSI C63.4 (2003) with FCC Method 47 CFR Part 15, Subpart C: Intentional Radiators FCC Unlicensed Testing Procedures FCC Unlicensed PCS Testing Procedures Spread Spectrum Devices Public Safety s Land Mobile, Fixed Land Mobile, Fixed Zone Enhancers ANSI C American National Standard for Testing Unlicensed Wireless Devices ANSI C Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices DA March 30, 2000 and KDB Pub. No : with FCC Method - 47 CFR Part 15, Subpart C: Intentional Radiators - (Filing and Measurement Guidelines for Frequency Hopping Spread Spectrum Systems - and - New Guidance on Measurements for Digital Transmission Systems in Section ) RSS-111, Issue 4 (January 2012) Broadband Public Safety Operating in the Band MHz RSS-112, Issue 1 (February 2008) Land Mobile and Fixed Operating in the Band (1 670 to 1 675) MHz RSS-119, Issue 11 (June 2011) Land Mobile and Fixed Transmitters and Receivers, (27.41 to 960) MHz RSS-131, Issue 2 (July 2003) Zone Enhancers for the Land Mobile Service (902 to 928) MHz, (2 400 to ) MHz, (5 725 to 5 850) MHz (4 940 to 4 990) MHz (1 670 to 1 675) MHz (27.41 to 960) MHz Version 009 Issued: 11/11/2014 Page 3 of 6

4 Cellular Telephones Personal Communications Services Personal Communications Services Low Power Unlicensed Devices Certification Requirements Licensed Devices RSS-132, Issue 3 (January 2013) Cellular Telephones Employing New Technologies Operating in the Bands MHz and MHz RSS-133, Issue 6 (January 2013) 2 GHz Personal Communications Services RSS-134, Issue 1, Rev. 1 (March 25, 2000) 900 MHz Narrowband Personal Communication Service RSS-210, Issue 8 (December 2010) Low Power License-Exempt communication Devices (All Frequency Bands): Category 1 RSS-Gen, Issue 3 (December 2010) General Requirements and for the TIA/EIA 603-D (2010) with 47 CFR Part 2: General Mobile Services in 47 CFR Parts 22, 24, 90, 95, and 101 ETSI EN V2.4.1 ( ) ElectroMagnetic Compatibility and Spectrum Matters (ERM);Short Range Devices (SRD); equipment to be used in the 25 MHz to MHz frequency range with power levels ranging up to 500 mw;part 1: Technical characteristics and test methods EN V2.4.1 Electromagnetic compatibility and spectrum Matters (ERM); Short Range Devices (SRD); equipment to be used in the 25 MHz to MHz frequency range with power levels ranging up to 500 mw; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (824 to 849) MHz and (869 to 894) MHz 2 GHz 900 MHz 9 khz to 40 GHz N/A 9 khz to 40 GHz 25 MHz to MHz 25 MHz to MHz Version 009 Issued: 11/11/2014 Page 4 of 6

5 Wideband Data Transmission EN V1.7.1 Electromagnetic compatibility and spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (2 400 to ) MHz ETSI EN V1.8.1 ( ) Wideband Data Transmission Radiated Electromagnetic compatibility and spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive ETSI EN V1.7.1 ( ) Electromagnetic compatibility and spectrum Matters (ERM);Short Range Devices (SRD); equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 1: Technical characteristics and test methods (2 400 to ) MHz 9 khz to 30 MHz EN V1.5.1 Electromagnetic compatibility and spectrum Matters (ERM); Short Range Devices (SRD); equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive 9 khz to 30 MHz ETSI EN V1.6.1 ( ) Electromagnetic compatibility and spectrum Matters (ERM);Short range devices; equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods 1 GHz to 40 GHz Version 009 Issued: 11/11/2014 Page 5 of 6

6 EN V1.4.1 Electromagnetic compatibility and spectrum Matters (ERM); Short range devices; equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive 1 GHz to 40 GHz Land Mobile ETSI EN V1.7.1 ( ) Electromagnetic compatibility and spectrum Matters (ERM);Land mobile service; equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector;part 1: Technical characteristics and methods of measurement 30 MHz 1000 MHz Land Mobile ETSI EN V1.5.1 ( ) Electromagnetic compatibility and spectrum Matters (ERM);Land mobile service; equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector;part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive 30 MHz 1000 MHz Notes: 1. * = As Applicable 2. For standards or methods listed on the scope of accreditation without a revision number or issue date or with a superseded issue date or revision number, laboratories are expected to be competent in the use of the current version within one year of standard or method publication update (or by the authorized use date of a recognition body or regulatory agency). When an older standard or method is required for an accredited test, the scope will include the superseded date/version if lab demonstrated proficiency for the procedures to be enveloped by and within the limits of the listed tests and the general controls enveloped in ISO/IEC Accreditation. 3. For the CISPR standards, the test laboratory is using the regional test requirement documents as opposed to the base reference documents as defined by the regional regulatory agencies (e.g. AS/NZ representing Australia and New Zealand, EN for the European community). 4. This scope is part of and must be included with the Certificate of Accreditation No. AT Vice President Version 009 Issued: 11/11/2014 Page 6 of 6

National Voluntary Laboratory Accreditation Program

National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Compatible Electronics, Inc. 114 Olinda Drive Brea, CA 92823 Mr. Jeff Klinger Phone: 714-579-0500 Fax: 714-579-1850