SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TIMCO ENGINEERING, INC. 849 NW State Road 45 Newberry, FL Sid Sanders - Phone: sid@timco.cc Website: ELECTRICAL (EMC) Valid to: December 31, 2017 Certificate Number: In recognition of the successful completion of the A2LA evaluation, accreditation is granted to this laboratory to perform the following tests: Test Technology: Test Method(s) 1 : Emissions Radiated and Conducted (Unintentional) FCC Part 15B (using ANSI C63.4:2014); FCC Part 18 (using MP-5:1986); ANSI C63.4:2009 EN 55011; CISPR 11; AS/NZS CISPR 11; EN (2010) (Excluding Section 9.6); CISPR (Excluding Section 9.6); AS/NZS CISPR 22; ICES-001; ICES-003; ICES-004; ICES-005 Harmonic Current Emissions EN ; IEC ; AS/NZS Fluctuation and Flicker EN ; IEC ; AS/NZS Immunity ESD EN ; IEC Radiated Immunity (Up to 2.7 GHz) EN ; IEC ; AS/NZS ; AS/NZS Amendment 1; AS/NZS Amendment 1 EFT/Burst EN ; IEC Surge (Excluding Annex A) Conducted Immunity (Excluding EM clamp coupling) Voltage Dips, Short Interruptions and Voltage Variations Immunity EN ; IEC ; AS/NZS EN ; IEC ; AS/NZS EN ; IEC (A2LA Cert. No ) Revised 03/13/2017 Page 1 of 5

2 Test Technology: Test Method(s) 1 : Unlicensed Transmitter / Receiver Emissions (Excluding SAR and DFS) Licensed Transmitter / Receiver Emissions EU Radio Test (Excluding DFS, Relative Humidity, Salt Spray, Rain, Magnetic Field Immunity, and Vibration) Canadian Broadcasting Standards Generic and Product Family EMC Tests EU Product Family Immunity Standards ACMA Standards FCC Parts 15C, D, E, F, G, H (using ANSI C63.10:2013 and ANSI C63.17:2013); AS/NZS 4268; RSS-Gen; RSS-210; RSS-211; RSS-213; RSS-215; RSS-216; RSS-220; RSS-222; RSS-236; RSS-238; RSS-243; RSS-244; RSS-247; RSS-251; RSS-287; RSS-288; RSS-310 FCC Parts 2, 11, 20, 22, 24, 25, 27, 73, 74, 80, 87, 90, 95, 96, 97, and 101 (using TIA-603-D); ANSI C63.4:2009; ANSI C63.4:2014; TIA-603-C; RSS-Gen; RSS-102; RSS-111; RSS-112; RSS-117; RSS-119; RSS-123; RSS-125; RSS-127; RSS-130; RSS-131; RSS-132; RSS-133; RSS-134; RSS-135; RSS-137; RSS-139; RSS-141; RSS-142; RSS-170; RSS-181; RSS-182; RSS-191; RSS-192; RSS-194, RSS-195; RSS-196; RSS-197; RSS-199; AS/NZS 4295; AS/NZS 4355; AS/NZS 4365; AS/NZS ; AS/NZS Amendment 1; AS/NZS ; AS/NZS Amendment 1; AS/NZS 4583; AS/NZS 4770; AS/NZS ; AS/NZS ; AS/NZS 4582; AS 4367 EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN ; ETSI EN BETS-1; BETS-4; BETS-5; BETS-6; BETS-8; BETS-9 EN ; EN ; EN ; EN ; EN 55024; ETSI ; ETSI ; ETSI ; ETSI ; AS/NZS EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN ; EN (Excluding section 8) Radiocommunications (Analogue Speech (Angle Modulated) Equipment) Standard 2014; Radiocommunications (UHF CB Radio Equipment) Standard 2011 (No. 1); Radiocommunications (VHF Radiotelephone Equipment Maritime Mobile Service) Standard 2014; (A2LA Cert. No ) Revised 03/13/2017 Page 2 of 5

3 Test Technology: Test Method(s) 1 : ACMA Standards (cont.) Radiocommunications (118 MHz to 137 MHz Amplitude Modulated Equipment - Aeronautical Radio Service) Standard 2012; Radiocommunications (Paging Service Equipment) Standard 2014; Radiocommunications (MF and HF Radiotelephone Equipment - International Maritime Mobile Service) Standard 2014; Radiocommunications (MF and HF equipment Land Mobile Service) Standard 2014; Radiocommunications (Short Range Devices) Standard 2014; Radiocommunications (HF CB and Handphone Equipment) Standard 2008; Radiocommunications (Devices used in the Inshore Boating Radio Services Band) Standard When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 - General Requirements- Accreditation of ISO-IEC Laboratories. (A2LA Cert. No ) Revised 03/13/2017 Page 3 of 5

4 Project 25 Compliance Assessment Program Baseline Common Air Interface Testing Requirements. P25 Performance Requirement Subscriber Units (Phase 1) Subscriber Unit Conventional Mode Subscriber Unit Trunked Mode Base Stations / Repeaters (Phase 1) Base Station / Repeater Conventional Mode Base Station / Repeater Trunked Mode Project 25 Phase 1 Common Air Interface Conventional Subscriber Unit Performance Project 25 Phase 1 Common Air Interface Trunked Subscriber Unit Performance Project 25 Phase 1 Common Air Interface Conventional Base Station/Repeater Performance Project 25 Phase 1 Common Air Interface Trunked Base Station/Repeater Performance P25 Interoperability Subscriber Unit Conventional Subscriber Unit Interoperability (Direct Mode) Conventional Subscriber Unit Interoperability (Repeat Mode) Trunked Mode Operation - Subscriber Unit Base Station / Repeater Conventional Mode Base Station / Repeater Interoperability Trunked Mode - Base Station / Repeater Interoperability Requirement Project 25 Phase 1 Common Air Interface Conventional Subscriber Unit Interoperability Project 25 Phase 1 Common Air Interface Conventional Subscriber Unit Interoperability Project 25 Phase 1 Common Air Interface Trunked Subscriber Unit Interoperability Project 25 Phase 1 Common Air Interface Conventional Base Station/Repeater Interoperability Project 25 Phase 1 Common Air Interface Trunked Base Station/Repeater Interoperability (A2LA Cert. No ) Revised 03/13/2017 Page 4 of 5

5 Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB , Appendix A, Table A.1: Rule Subpart/Technology Test Method Maximum Frequency Unintentional Radiators Part 15B ANSI C63.4: GHz Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) 40 GHz Intentional Radiators Part 15C ANSI C63.10: GHz Unlicensed Personal Communication Systems Devices Part 15D ANSI C63.17: GHz U-NIII without DFS Intentional Radiators Part 15E ANSI C63.10: GHz UWB Intentional Radiators Part 15F ANSI C63.10: GHz BPL Intentional Radiators Part 15G ANSI C63.10: GHz White Space Device Intentional Radiators Part 15H ANSI C63.10: GHz Maritime and Aviation Radio Services Parts 80 and 87 ANSI/TIA-603-D 40 GHz (A2LA Cert. No ) Revised 03/13/2017 Page 5 of 5

6 Accredited Laboratory A2LA has accredited TIMCO ENGINEERING, INC. Newberry, FL for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets A2LA R242 - Specific Requirements - Project 25 (P25) Compliance Assessment Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 25 th day of April President and CEO For the Accreditation Council Certificate Number Valid to December 31, 2017 Revised March 13, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.