ACCREDITED LABORATORY. LIBERTY LABS, INC. Kimballton, IA for technical competence in the field of Calibration

Size: px

Start display at page:

Download "ACCREDITED LABORATORY. LIBERTY LABS, INC. Kimballton, IA for technical competence in the field of Calibration"

Gabriel Atkinson
5 years ago
Views:

This laboratory meets the requirements of ISO/IEC 17025-1999 "General Requirements for the Competence of Testing and Calibration Laboratories.

1 THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY A2LA has accredited LIBERTY LABS, INC. Kimballton, IA for technical competence in the field of Calibration The accreditation covers the specific calibrations listed on the agreed scope of accreditation. This laboratory meets the requirements of ISO/IEC "General Requirements for the Competence of Testing and Calibration Laboratories." This laboratory also meets the requirements of ANSI/NCSL Z and any additional program requirements in the field of calibration. Presented this 5 th day of January 2006 President For the Accreditation Council Certificate Number: Valid to: October 31, 2007 For the calibrations to which this accreditation applies, please refer to the laboratory's Calibration Scope of Accreditation.

2 SCOPE OF ACCREDITATION TO ISO/IEC & NCSL/ANSI Z LIBERTY LABS, Inc Yellowwood Rd. Kimballton, IA Michael Wayne Howard Phone: Web: CALIBRATION Valid To: October 31, 2007 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Electrical Microwave / RF Parameter/Equipment Range Best Uncertainty 3, 5 (±) Comments LISN Insertion Loss T connector Through connection 9 khz to 108 MHz 9 khz to 108 MHz 0.66 db + M 0.68 db + M ANSI C63.4, Appendix E. HP 8751A, 87512A, BNC and Type N calibration standards Impedance 9 khz to 108 MHz 0.39 % Current Probes & Bulk Current Injection Probes CISPR , Section 5 and EN Insertion Loss Transfer Impedance 5 Hz to 500 MHz 5 Hz to 500 MHz (500 to 1000) MHz 0.77 db + M 0.77 db + M 1.1 db + M HP 8751A, 87512A, BNC and Type N calibration standards (A2LA Cert. No ) Revised 01/06/2006 Page 1 of 17

3 Parameter/Equipment Range Best Uncertainty 3, 5 (±) Comments CDN s and Adapters (50 to 150) Ω Adapter Insertion Loss Coupling Factor 10 khz to 230 MHz 10 khz to 230 MHz 1.16 db + M 1.1 db + M EN with HP 8751A, 87512A, BNC and Type N calibration standards Impedance 10 khz to 230 MHz 0.39 % Rod Antennas (ECSM) Antenna Factor 10 Hz to 60 MHz 0.23 db CISPR 25, ANSI C63.5, SAE ARP 958 (ECSM) using HP 8751A, 87512A, BNC calibration standards Rod Antennas Antenna Factor 30 khz to 60 MHz 1.0 db NIST 1347 HP 8751A, 87512A, BNC calibration standards Loop Antennas 1 khz to 30 MHz 0.32 db Standard field using vacuo junction 20 Hz to 100 khz 0.34 db Using series resistor to measure loop current. 20 Hz to 30 MHz 0.44 db By substitution NSA Measurements ANSI C63.4 CISPR (30 to 1000) MHz (1 to 18) GHz HP 8591E and 8593EM (30 to 1000) MHz (30 to 6000) MHz 0.1 db 0.2 db HP 8753D (30 to 1000) MHz (1 to 40) GHz 0.1 db 0.2 db Agilent 8364B (A2LA Cert. No ) Revised 01/06/2006 Page 2 of 17

4 ESD Simulators IEC/EN Contact Voltage (positive and negative) Rise Time Peak Current 30 ns current 60 ns current (2 to 8) kv (0.7 to 1) ns (6.8 to 33) A (2.8 to 20.8) A (1.4 to 10.4) A 0.69 % 23 ps 2.8 % 3.8 % 9.0 % TDS 7404B Scope MD 102 target 20 db attenuator Air Discharge Voltage (positive and negative) (0 to 25) kv 1.9 % SAE J ISO Rise Time RC Time Constant (at ± 15 kv) (0.7 to 1) ns 600 ns ± 130 ns (for 330 pf probe) 300 ns ± 60 ns (for 150 pf probe) 60 ps 60 ps 60 ps TDS 7404B Scope, MD 102 Target 20 db Attenuator Indicated Voltage 2 kv to 25 kv 0.69 % Electrometer 6514 Probe MHEP-1 Magnetic Meters 20 Hz to 500 khz 20 Hz to 500 khz 0.73 db 0.73 db Helmholtz coil Standard field Absorbing Clamps 30 MHz to 1 GHz 2.0 db CISPR HP 8593E Injection Clamps (0.01 to 300) MHz (300 to 1000) MHz 4 db 3 db IEC HP 8593E Antenna Pattern Measurements (10 to 1000) MHz (1 to 40) GHz 0.87 db 1.0 db HP E8364B PNA (A2LA Cert. No ) Revised 01/06/2006 Page 3 of 17

5 RF Isotropic Probes 5 10 khz to 1 GHz 0.71 db GTEM/TEM cell (0.1 to 18) GHz 0.76 db GTEM/Open Ended Wave Guide 10 khz to 1 GHz 1.3 db Stripline/Tri-Plate (1 to 40) GHz 1.9 db Standard field Isotropic Response/ Linearity 0.82 db Channel Match 0.98 db RF Pre-Amps and Amplifiers 10 khz to 18 GHz (18 to 40) GHz 0.97 db 1.0 db IEEE 291, HP 8591E 8593E and E8364B PNA General RF Insertion Loss S Parameters 20 Hz to 500 MHz 10 MHz to 50 GHz 0.15 db 0.15 db IEEE 291 Agilent 8364B PNA 10 Hz to 500 MHz (0.5 to 18) GHz 0.97 db 0.97 db HP 8591E and 8593E (0.3 to 1000) MHz (1 to 6) GHz 0.20 db 0.20 db HP 8753D (A2LA Cert. No ) Revised 01/06/2006 Page 4 of 17

6 Parameter/Equipment Range Best Uncertainty 3, 4 (±) Comments Reflection S 11 /S 22 Measure (100 to 300) khz (0.5 to 1) LIN (0.1 to 0.5) LIN (0 to 0.1) LIN M (LIN) M (LIN) HP 8753D with 85032B cal kit 300 khz to 6 GHz (0.56 to 1) LIN (0.32 to 0.56) LIN (0.1 to 0.32) LIN (0.032 to 0.1) LIN (0.001 to 0.032) LIN (0 to 0.001) LIN 10 MHz to 18 GHz (0.6 to 1) LIN (0.32 to 0.66) LIN (0.1 to 0.32) LIN (0.032 to 0.1) LIN (0 to 0.032) LIN Agilent E8364B PNA with electronic cal (18 to 50) GHz (0.6 to 1) LIN (0.32 to 0.6) LIN (0.1 to 0.32) LIN (0.032 to 0.1) LIN (0 to 0.032) LIN (A2LA Cert. No ) Revised 01/06/2006 Page 5 of 17

7 Transmission S 12 /S 21 Measure khz to 6 GHz (0 to 12) db (12 to 30) db (30 to 40) db (40 to 50) db (50 to 60) db (60 to 70) db M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o HP 8753D with 85032B cal kit 10 MHz to 18 GHz (0 to 12) db (12 to 30) db (30 to 40) db (40 to 50) db (50 to 60) db (60 to 70) db M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o Agilent E8364B PNA with electronic cal (18 to 50) GHz (0 to 12) db (12 to 30) db (30 to 40) db (40 to 50) db (50 to 60) db (60 to 70) db M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o M db/0.1 o Conical Log Spirals 1 meter (200 to 400) MHz (1000 to ) MHz 2.2 db 0.88 db 1.7 db SAE ARP958 with Agilent N5230A PNA with electronic cal (A2LA Cert. No ) Revised 01/06/2006 Page 6 of 17

8 High Precision Dipole Calibrations on Site 1 Horizontal (30 to 60) MHz (50 to 150) MHz (140 to 400) MHz 0.46 db 1.45 db 1.65 db ANSI C ANSI C ANSI C63.5 with HP 8591E and 8593E 3 & 10 Meters using standard dipole sets (i.e. EMCO 3121) on Site 1 GND Plane Horizontal/Vertical (30 to 1000) MHz 0.31 db ANSI C ANSI C ANSI C63.5 with HP 8591E and 8593E 3 Meters using High Precision Dipoles (i.e. NIST Fitzgerald, NPL, Austrian Research) on square meter GND plane 5 Horizontal (30 to 60) MHz (50 to 150) MHz (140 to 400) MHz 0.30 db 0.36 db 0.43 db 0.39 db ANSI C ANSI C ANSI C63.5 with HP 8591E and 8593E 10 Meters using High Precision Dipoles (i.e. NIST Fitzgerald, NPL, Austrian Research) on square meter GND plane 5 Horizontal (30 to 60) MHz (50 to 150) MHz (140 to 400) MHz 0.32 db 0.39 db 0.46 db 0.43 db ANSI C63.5 with HP 8591E and 8593E 3 & 10 Meters using standard dipole sets (i.e. EMCO 3121) on square meter GND plane 5 Horizontal/Vertical (30 to 1000) MHz 0.25 db ANSI C ANSI C ANSI C63.5 with HP 8591E and 8593E (A2LA Cert. No ) Revised 01/06/2006 Page 7 of 17

9 Biconical Antennas 5 1 Meter Distance (30 to 70) MHz (70 to 200) MHz 0.33 db 0.34 db 0.37 db SAE ARP958; with Agilent N5230A PNA with E-Cal module 3 Meter Distance (30 to 70) MHz (70 to 200) MHz 0.37 db 0.48 db 0.37 db SAE ARP958 Appendix C Agilent N5230A PNA with E-Cal module 3 Meters 10 Meters (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz 0.25 db 0.2 db 0.4 db 0.4 db ANSI C , ANSI C , ANSI C63.5 using 3-antenna method on (50 80) square meter ground plane with Agilent N5230A PNA with E-Cal module 3 Meters 10 Meters (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz 0.2 db 0.25 db ANSI C , ANSI C , ANSI C63.5 using identical antenna method on (50 80) square meter ground plane with N5230A PNA and E- Cal module 3 Meters 10 Meters (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 200) MHz 0.2 db 0.25 db 0.25 db 0.4 db ANSI C , ANSI C , ANSI C63.5 using identical antenna method on (50 80) square meter ground plane with N5230A PNA and E-Cal module (A2LA Cert. No ) Revised 01/06/2006 Page 8 of 17

10 Log-Periodic Antennas 5 1 Meter Distance (200 to 400) MHz 0.32 db 0.38 db 0.52 db SAE ARP958 with N5230A PNA and E-Cal module 3 Meter Distance (200 to 400) MHz 0.38 db 0.58 db SAE ARP958, Appendix C 3 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.4 db 0.4 db 0.4 db ANSI C , ANSI C , ANSI C63.5; using 3-antenna method on (50 80) square meter ground plane with N5230A PNA and E-Cal module 10 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.4 db 0.4 db 0.4 db 3 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.8 db 0.9 db 1.3 db ANSI C , ANSI C , ANSI C63.5; using identical antenna method on (50 80) square meter ground plane with N5230A PNA and E-Cal module (A2LA Cert. No ) Revised 01/06/2006 Page 9 of 17

11 Log-Periodic Antennas 5 (cont.) 10 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.8 db 0.9 db 1.0 db 1.5 db ANSI C , ANSI C , ANSI C63.5 using identical antenna method on (50 80) square meter ground plane with N5230A PNA and E-Cal module 3 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.2 db 0.2 db 0.2 db 0.25 db ANSI C , ANSI C , ANSI C63.5 using identical antenna method on (50 80) square meter ground plane with N5230A PNA and E-Cal module 10 Meters (300 to 400) MHz (400 to 500) MHz (500 to 600) MHz (600 to 700) MHz (700 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.55 db (A2LA Cert. No ) Revised 01/06/2006 Page 10 of 17

12 Bilog Antennas 5 1 Meter Distance (30 to 70) MHz (70 to 200) MHz (200 to 400) MHz (1000 to 2000) MHz 0.50 db 0.76 db 0.91 db 0.74 db 0.75 db SAE ARP958 with N5230A PNA and E- Cal module 3 Meter Distance 3 & 10 Meter Distance (30 to 70) MHz (70 to 200) MHz (200 to 400) MHz (1000 to 2000) MHz (20 to 1000) MHz (1000 to 6000) MHz 0.11 db 0.11 db 0.19 db 0.26 db 0.41 db 0.58 db 0.75 db SAE ARP958, Appendix C ANSI C , ANSI C , ANSI C63.5 with N5230A PNA and E-Cal module Using 3-antenna method on Site 1 (20 to 1000) MHz (1000 to 6000) MHz 0.58 db 0.75 db Using 3-antenna method on (50 80) square meter ground plane (20 to 1000) MHz (1000 to 6000) MHz 0.68 db 0.89 db Using identical antenna method on Site 1 (20 to 1000) MHz (1000 to 6000) MHz 0.68 db 0.89 db Using identical antenna method on (50 80) square meter ground plane (A2LA Cert. No ) Revised 01/06/2006 Page 11 of 17

13 Horn Antennas 5 (e.g. EMCO 3115) ANSI C , ANSI C , ANSI C63.5 with HP 8591E, 8593EM, E8364B PNA and 8753E 960 MHz to 18 GHz 960 MHz to 18 GHz using 3-antenna method on an OATS in anechoic room 960 MHz to 18 GHz 960 MHz to 18 GHz using identical antenna method on an OATS in anechoic room 960 MHz to 18 GHz (18 to 40) GHz 0.69 db 0.68 db using standard field antenna method in an anechoic room 960 MHz to 18 GHz (18 to 40) GHz 1.3 db 1.3 db using substitution method 1 Meter Distance (1 to 15) GHz (15 to 18) GHz 1.0 db 1.0 db SAE ARP958 with E8364B PNA 3 Meter Distance (1 to 18) GHz 0.70 db SAE ARP958, Appendix C (A2LA Cert. No ) Revised 01/06/2006 Page 12 of 17

14 Loop Antennas 6 10 Hz to 100kHz 0.34 db IEEE Std khz to 30 MHz 0.44 db Substitution by transfer standard Electric Field Probes 6 10 khz to 5000 MHz Correction Factor (i.e. FP5000 probe type) 1.3 db IEEE 1309 via transfer standard 10 khz to 5000 MHz Linearity Factor (i.e. FP5000 probe type) 0.83 db 10 khz to 5000 MHz Channel Match Factor (i.e. FP5000 probe type) 1.0 db 200 to 1000 MHz Isotropic Response 0.83 db 80 MHz to 18 GHz Correction Factor (i.e. FP2080 probe type) 1.9 db 80 MHz to 18 GHz Linearity Factor (i.e. FP2080 probe type) 0.84 db 80 MHz to 18 GHz Channel Match Factor (i.e. FP2080 probe type) 1.0 db (A2LA Cert. No ) Revised 01/06/2006 Page 13 of 17

15 Horn Antennas 6 (e.g. EMCO 3115) 800 MHz to 18 GHz ANSIC C , ANSI C , ANSI C63.5 (Reference antenna method with broadband reference antenna) 1 Meter Distance 3 Meter Distance 800 MHz to 18 GHz 800 MHz to 18 GHz 0.92 db 0.88 db SAE ARP958 SAE ARP958, Appendix C Horn Ant Pattern 800 MHz to 18 GHz Anritsu R3770 Measurement 6 Network analyzer Dipole Antennas 6 (e.g. SB VHAP/UHAP) (30 to 50) MHz (50 to 150) MHz (140 to 400) MHz 0.37 db 0.43 db 0.49 db 0.47 db VCCI, V.10/ Annex 1-3 (30 to 50) MHz (50 to 150) MHz (140 to 400) MHz 0.30 db 0.32 db ANSI C , ANSI C , ANSI C63.5, Ref method (30 to 1000) MHz 0.32 db Standard site method Biconical Antenna 6 10 Meter Distance (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 300) MHz 0.38 db 0.46 db 0.50 db VCCI, V.10/ Annex Meters (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 300) MHz 0.55 db ANSI C , ANSI C , Standard site method 10 Meters (30 to 72.5) MHz (72.5 to 115) MHz (115 to 157.5) MHz (157.5 to 300) MHz 0.40 db 0.50 db 0.55 db ANSI C , ANSI C , ANSI C63.5 Standard site method (A2LA Cert. No ) Revised 01/06/2006 Page 14 of 17

16 Biconical Antenna 6 (cont.) 1 Meter Distance 3 Meter Distance (30 to 70) MHz (70 to 200) MHz (30 to 70) MHz (70 to 200) MHz 0.33 db 0.48 db 0.37 db 0.37 db 0.49 db 0.41 db SAE ARP958 SAE ARP958 Appendix C Log-Periodic Antennas 6 10 Meter Distance (200 to 600) MHz (600 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.38 db 0.50 db 0.59 db 0.64 db 0.73 db VCCI, V.10/ Annex Meters (200 to 600) MHz (600 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.40 db 0.50 db 0.60 db 0.60 db 0.70 db ANSI C , ANSI C Standard site method 10 Meters (200 to 600) MHz (600 to 800) MHz (800 to 900) MHz (900 to 1000) MHz 0.40 db 0.50 db 0.60 db 0.60 db 0.70 db ANSI C , ANSI C , ANSI C63.5 Standard site method 1 Meter Distance (200 to 400) MHz 0.42 db SAE ARP958 3 Meter Distance (200 to 400) MHz 0.31 db 0.38 db SAE ARP958, Appendix C Broadband NSA Measurements 6 (30 to 300) MHz 0.58 db ANSI C63.4, VCCI, V-3 Appendix I and II CISPR (200 to 1000) MHz 0.69 db (A2LA Cert. No ) Revised 01/06/2006 Page 15 of 17

17 Dipole 6 NSA Measurements (30 to 1000) MHz 0.47 db ANSI C63.4, VCCI, V-3 Appendix I and II CISPR Bilog Antennas 6 1 Meter Distance (30 to 70) MHz (70 to 200) MHz (200 to 400) MHz (1000 to 6000) MHz 1.2 db SAE ARP958 3 Meter Distance (30 to 70) MHz (70 to 200) MHz (200 to 400) MHz (1000 to 6000) MHz 1.6 db SAE ARP958, Appendix C 3 Meter Distance (20 to 1000) MHz (1000 to 6000) MHz 0.68 db 0.85 db ANSI C , ANSI C Standard site method 10 Meter Distance (20 to 1000) MHz (1000 to 6000) MHz 0.72 db 0.92 db ANSI C , ANSI C , ANSI C63.5 Standard site method 1 This laboratory offers commercial calibration service. 2 Best Uncertainties represents an expanded uncertainty corresponding to a % level of confidence using a coverage factor, k. Values of k other than 2 were approximated by a t-distribution with the effective degrees of freedom, v eff, obtained from the Welch-Satterthwaite formula. 3 Best Uncertainty is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards of nearly ideal measuring equipment. Best uncertainties represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The best uncertainty of a specific calibration performed by the laboratory may be greater than the best uncertainty due to the behavior of the customer s device, to the environment (if the calibration is performed in the field) and to influences from the circumstances of the specific calibration. 4 In the statement of best uncertainty, M is the Mismatch error due to connections of device to other devices in actual use. (A2LA Cert. No ) Revised 01/06/2006 Page 16 of 17

18 5 On-site calibration service is available for this calibration. The uncertainties achievable on a customer's site can normally be expected to be larger than the Best Measurement Capabilities (BMC) that the accredited laboratory has been assigned as Best Uncertainty on the A2LA Scope. Allowance must be made for aspects such as the environment at the place of calibration and for other possible adverse effects such as those caused by transportation of the calibration equipment. The usual allowance for the uncertainty introduced by the item being calibrated, (e.g. resolution) must also be considered and this, on its own, could result in the calibration uncertainty being larger than the BMC. 6 These calibrations are only performed at the remote facility at Fujitsu General EMC Laboratory, which is enveloped under the Liberty Labs, Inc. A2LA accreditation. (A2LA Cert. No ) Revised 01/06/2006 Page 17 of 17

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z540.3

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3 KEYSIGHT TECHNOLOGIES, INC. SERVICE CENTERS 1346 Yellowwood Rd Kimballton, IA 51543 Brandt Langer Phone: 712 254 5100