2015 / 9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany. Radio and Telecommunications Terminal Equipment

Size: px

Start display at page:

Download "2015 / 9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany. Radio and Telecommunications Terminal Equipment"

Theodore Robinson
5 years ago
Views:

1 OSRAM OSRAM Manufacturer or representative: Address: 2015 / 9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany Brand name or trade mark: Product type: Product designation: OSRAM Radio and Telecommunications Terminal Equipment IQ Push Button Coupler See attached list The designated product(s) is (are) in conformity with the provisions ofthe following European Directives. IEI 2006/95/EC 2004/108/EC /125/EC 244/ 245/ 1194/ /65/EU 1999/5/EC Directive ofthe European Parliament and ofthe Council of 12 December 2006 on the harmonisation ofthe laws of Member States relating to electrical equipment designed for use within certain voltage limits Directive ofthe European Parliament and ofthe Council of 15 September 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility Directive of the European Parliament and ofthe Council of 21 October establishing a framework for the setting of ecodesign requirements for energy-related products Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for non-directional household lamps Commission Regulation (EC) implementing Directive 2005/32/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for fluorescent lamps without integrated bailast, for high intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, and repealing Directive 2000/55/EC of the European Parliament and ofthe Council Commission Regulation (EU) No 1194/2012 of 12 December 2012 implementing Directive /125/EC ofthe European Parliament and ofthe Council with regard to ecodesign requirements for directional lamps, light emitting diode lamps and related equipment Directive ofthe European Parliament and ofthe Council of 8 June 2011 on the restriction ofthe use of certain hazardous substances in electrical and electronic equipment Directive ofthe European Parliament and ofthe Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity Last two digits of the year in which the CE marking was affixed: 15 Place and date of signatures: Signatures: ity Management EHS LAB emmel Bernhs Quality Assurance Names: Günther Casper Bernhard Schemmel This declaration of conformity is issued under the sole responsibility of the manufacturer or representative. It certifies compliance with the indicated Directives, but implies no warranty of properties. 1

2 2015 / 9C EN-00 The conformity of the designated product(s) with the provisions of the European Directive 2004/108/EC is given by the compliance with the following European Standard(s) or other speeifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 55015: EN 55022: 2010 EN : 2006 EN : 2008 EN : EN : 2010 EN : 2012 EN : 2006 EN : EN : 2004 EN 61547: EN 50498: 2010 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (class B) Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement Electromagnetic compatibility (EMC) Part 3-2: Limits Limits for harmonic current emissions (equipment input current < 16 A per phase) Electromagnetic compatibility (EMC) Part 3-3: Limits Limitation of voltage changes, voltage fluetuations and flicker in public low voltage supply Systems, for equipment with rated current < 16 A per phase and not subjected to conditional connection Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC :2006) / Endorsement notice Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC :2012) / Endorsement notice Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to condueted disturbances, induced by radio-frequency fields (IEC :2013) / Endorsement notice Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC :2004) Equipment for general lighting purposes EMC immunity requirements Electromagnetic compatibility (EMC) - Product family Standard for aftermarket electronic equipment in vehicles 2

3 2015 / 9C EN-00 The conformity ofthe designated product(s) with the provisions ofthe European Directive 2011/65/EU is given by the compliance with the following European Standard(s) or other speeifications. If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. EN 50581: 2012 Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances fj*3 Internal report 1M EN00 3

4 2015 / 9C EN-00 The conformity of the designated product(s) with the provisions of the European Directive 1999/5/EC is given by the compliance with the following European Standard(s). If not elsewhere/otherwise indicated the edition/amendment as referenced below applies. ETSI EN V2.1.1: ETSI EN V2.1.2: ETSI EN V1.8.1: ETSI EN V1.9.2 ETSI EN V2.2.1 EN : A11: + A1: A12: AC: A2:2013 EN : 2014 EN 60065: A1: Cor.: A11: A2:2010 +A12:2011 EN 62479:2010 EN 62311:2008 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to MHz frequency ränge with power levels ranging up to 500 mw; Part 1: Technical characteristics and test methods Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to MHz frequency ränge with power levels ranging up to 500 mw; Part 2: Harmonized EN covering essential requirements under article 3.2 ofthe R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wideband transmission Systems - Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) Standard for radio equipment and Services; Part 1: Common technical requirements Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) Standard for radio equipment ;Part 17:Specific conditions for Broadband Data Transmission Systems Information technology equipment - Safety - Part 1: General requirements Safety of laser products - Part 1: Equipment Classification and requirements (IEC :2014) / Endorsement notice Audio, video and similar electronic apparatus - Safety requirements Assessment of the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) (IEC 62479:2010, modified) / Endorsement notice Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz GHz) (IEC 62311:2007, modified) EMF exclusion note: This is not a final independent product, this is a build equipment, which will be installed in a final Atting. 4

5 5of 6

EU Declaration of Conformity Annex

EU Declaration of Conformity Annex 2017 / 9C1- The conformity of the designated product(s) with the provisions of the European Low Voltage Directive is given by the compliance with the following European Standard(s) or other specifications.