Accr. 002-Test EN-ISO (2005)

Transcription

1 Electromagnetic compatibility LAB > Examination of compliance with EMC standards > Measurement of radio-disturbances > Immunity tests > 2004/108/EC EMC Directive > CE Marking > Measurement of electromagnetic fields Accr. 002-Test EN-ISO (2005)

2 Expert advice Broad range, flexible service To check compliance with the EMC standards, our EMC laboratory offers you the following accredited services: Verification of appliance immunity to external EM phenomena > IEC/EN : Generic standard, residential environment > IEC/EN : Generic standard, industrial environment > EN 298: Automatic gas burner control systems for gas burners and gas burning appliances with or without fans > EN 230: Automatic burner control systems for oil burners > EN 50091: Specification for uninterruptible power systems (UPS). General and safety requirements for UPS used in restricted access locations > EN 50165: Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements > EN : Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems > EN 50293: Road traffic signal systems > IEC/EN ( 19): Household and similar electrical appliances Safety > IEC/EN : Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections > IEC/EN : Medical electrical equipment. (non-invasive) > IEC/EN 61131: Programmable controllers > IEC/EN 61326: Electrical equipment for measurement, control and laboratory use > IEC/EN 61547: Lighting appliances > IEC/EN : Metering equipment > IEC/EN : Electricity metering - Tariff and load control > CISPR 14/EN : Electro-domestic appliances > CISPR 24/EN 55024: Information technology equipment > ETSI/EN 489: Standard for radio equipment and services > ETSI/EN : Requirements for telecommunication network equipment

3 Immunity tests standards > IEC/EN : Testing and measurement techniques > IEC/EN : Electrostatic discharge (to 30 kv) > IEC/EN : Radio-frequency electromagnetic fields (45 V/m at GSM, DECT and Bluetooth frequencies) > IEC/EN : Fast electric transients (to 4 kv) > IEC/EN : Surge test (to 10 kv) > IEC/EN : Conducted disturbances induced by radio-frequency fields (to 20 V HF) > IEC/EN : Power frequency magnetic field (to 3000 A/m) > IEC/EN (*): Pulse magnetic field > IEC/EN (*): Damped oscillatory magnetic field > IEC/EN : Voltage dips, short interruptions and voltage variations (supply to 45 kva mono, 3 x 15 kva) > IEC/EN : Harmonics and interharmonics including mains signalling at a.c. power port > IEC/EN (*): Ripple on d.c. input power port > IEC/EN : Damped oscillatory wave (100kHz & 1MHz) Those tests can be performed as well on single phase as on three phase equipment. (*) not BELAC accredited

4 Measurement of appliance emissions Low frequency emissions > EN : Harmonics > EN : Voltage fluctuations and flicker High frequency emissions : > IEC/EN : Generic standard, residential environment > IEC/EN : Generic standard, industrial environment > IEC/ EN (*): Assessment of lighting equipment related to human exposure to electromagnetic fields > CISPR 11/EN 55011: ISM appliances > CISPR 14-1/EN : Electro-domestic appliances > CISPR 15/EN 55015: Lighting appliances > CISPR 22/EN 55022: IT appliances (*) not BELAC accredited Electromagnetic fields IEC/EN 62233: Electromagnetic fields of household appliances and similar apparatus with regard to human exposure Laborelec has received a BELAC accreditation for on-site measurements of electric fields at 50 Hz and magnetic fields from 50 Hz to 10 khz. We are the only ones in Belgium with this acknowledgement. This proves the high reliability of our measurement equipment and procedures, and ensures independence from manufacturers, vendors, HV transmission and MV and LV distribution. It is a quality guarantee for all companies that need EM field measurements to comply with the 2004/40/EC and 1999/519/EC Directives.

5 A BELAC EN-ISO accredited laboratory Accr. 002-Test EN-ISO (2005) CE marking Meeting the standards and specifications Electrical low voltage equipment must meet the relevant European standards on safety and Electromagnetic Compatibility (EMC). In many cases it must meet additional customer specifications. As a manufacturer or importer you need a written guarantee that your products comply with these standards and specifications. BELAC accredited tests offer an independent and accurate assessment of your equipment. Test in lab and in situ The experts of Laborelec conduct BELAC accredited tests in their own laboratory. Since larger machines are often difficult to transport, you can also make use of an unique service in which they carry out the tests on your premises. They use all the appropriate measurement methods and have all the required tools at their disposal. Due to the huge diversity of electrical equipment on the market, orientation tests are made before conducting tests in situ. Recommendations during new design and construction During the design or construction of appliances, you can call upon the assistance of our experts. The implementation of the proper EMC methods, based on their recommendations, will help you to develop your future design. In this way, you will be assured that the final products will meet all EMC standards. You may be demanding The service is fast and flexible: normal appliances take about 14 days, and customised tests are also possible. Knowledge of specifications Making use of Laborelec s service means that you are supported by years of experience in low voltage equipment testing. The EMC laboratory has been BELAC accredited for many years. The Laborelec experts regularly advise members of the GDF SUEZ group on writing specifications for low voltage equipment. This is your guarantee that the EMC team keeps a close eye on all the latest EMC developments. You can rely on your BELAC report confirming that your appliances meet all the relevant EMC standards.

6 Five reasons for you to choose Laborelec > Wide range of technical competences in Electricity Generation, Grids, and End-Use > Increased profitability and sustainability of your energy processes and assets > Unique combination of contract research and operational assistance > Independent advice based on certified laboratory and field analyses all over the world > More than 50 years of experience The Technical Competence Centre In energy processes and energy use From innovation to operational assistance Contact Conrad Bottu T Laborelec Belgium Laborelec The Netherlands Laborelec Germany Rodestraat 125 Amerikalaan 35 Bromberger Strasse Linkebeek 6199 AE Maastricht-Airport Wuppertal T T T F RPR/RPM Brussels BTW/TVA BE info@laborelec.com Responsible editor: Bart Boesmans VCA **