Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Transcription

1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: EMCCons DR. RAŠEK GmbH & Co. KG Boelweise 8, Ebermannstadt Location: Boelwiese 8, Ebermannstadt Störnhofer Berg 15, Unterleinleiter Tests in the fields: Electromagnetic Compatibility (EMC), Wireless application, Safety of electrical Appliances and Environmental testing Page 1 of 139

2 Flexible accreditation category 3 Within the specified testing fields, marked with *, the laboratory is permitted to use standard test methods listed here with different issue dates or revision status without being required to inform and obtain prior approval from DAkkS. The laboratory maintains a current list of all test methods in a flexible scope of accreditation. Flexible accreditation category 1 Within the specified testing fields, marked with **, the laboratory is permitted the free choice of standard or equivalent test methods without being required to inform and obtain prior approval from DAkkS. The listed test methods are exemplary. The laboratory maintains a current list of all test methods in a flexible scope of accreditation. Location: Moggast: Boelwiese 8, Ebermannstadt (Page 5 to 64) a. * flexible scope category 3: Page 5 to 44 b. not flexible scope: Page 44 to 64 Unterleinleiter: Störnhofer Berg 15, Unterleinleiter (Page 5 to 139) a. * flexible scope category 3: Page 5 to 44, Page 65 to 116, Page 125 to 131 and Page 137 to 139 b. ** flexible scope category 1: Page 123 to 125 c. not flexible scope: Page 44 to 64, Page 116 to 122 and Page 132 to 136 Period of validity: to Translation - Page 2 of 139

3 Content 1 Testing field: Electromagnetic Combatibility (EMC); location: Moggast and Unterleinleiter Flexible standards according to category 3 * Basic standards * Generic standards * Product standards * EMF * Automotive * Airborne Equipment * Maritime Equipment * Railway Equipment * Military Equipment * Procedures from foreign organisations for standardisation * US-American requirements EMC/Telecommunications * Withdrawn procedures or procedures for which newer issues were published (which still will be referenced) Basic standards Generic standards Product standards EMF Automotive Airborne Equipment Military Equipment Procedures from foreign organisations for standardisation Not flexible standards Automotive Airborne Equipment Military Equipment Procedures of foreign organizations Testing Field: Wireless application; location: Unterleinleiter Standards in the flexible scope of accreditation according to category 3 * Period of validity: to Translation - Page 3 of 139

4 2.2 Withdrawn procedures or procedures for which newer issues were published (which still will be referenced) Testing field: Environmental testing; location: Unterleinleiter Standards in the flexible scope of accreditation according to category 1 ** Standards in the flexible scope of accreditation according to category 3 * Not flexible standards Withdrawn procedures or procedures for which newer issues were published (which still will be referenced) Testing field: Safety of electrical Appliances; location: Unterleinleiter Standards in the flexible scope of accreditation according to category 3 * Period of validity: to Translation - Page 4 of 139

5 1 Testing field: Electromagnetic Combatibility (EMC); location: Moggast and Unterleinleiter 1.1 Flexible standards according to category 3 * Basic standards * EMC IEC :2008 DIN EN : ; VDE : EMC IEC : A1: A2:2010 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : EMC IEC :2014 DIN EN : ; VDE : EMC IEC :2013 DIN EN : ; VDE : EMC IEC : A1:2008 DIN EN : ; VDE : EMC IEC :2009 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 4-2: Testing and measurement techniques; Electrostatic discharge immunity test Electromagnetic compatibility (EMC); Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test Electromagnetic compatibility (EMC); Part 4-4: Testing and measurement techniques; Electrical fast transient/burst immunity test Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques Surge immunity test Electromagnetic compatibility (EMC); Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radiofrequency fields Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto Electromagnetic compatibility (EMC); Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test Period of validity: to Translation - Page 5 of 139

6 EMC IEC : A1:2000 DIN EN : ; VDE : EMC IEC : A1:2000 DIN EN : ; VDE : EMC IEC :2004 DIN EN : ; VDE : EMC IEC :2006 DIN EN : ; VDE : EMC IEC : A1:2009 DIN EN : ; VDE : EMC IEC : A1: A2:2009 DIN EN : ; VDE : EMC IEC :1998+A1: A2:2009 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test Electromagnetic compatibility (EMC); Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test Electromagnetic compatibility (EMC); Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests Electromagnetic compatibility (EMC); Part 4-12: Testing and measurement techniques; Oscillatory waves immunity test; Basic EMC publication Electromagnetic compatibility (EMC); Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests; Basic EMC publication Electromagnetic compatibility (EMC); Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test Electromagnetic compatibility (EMC); Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 khz EMC IEC :2015 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 khz Period of validity: to Translation - Page 6 of 139

7 EMC IEC : A1: A2:2008 DIN EN : ; VDE : DIN EN /A2: ; VDE /A2: EMC IEC : A1:2010 DIN EN : ; VDE : EMC IEC :2010 DIN EN : ; VDE : EMC IEC :2011 DIN EN : ; VDE : EMC IEC :2000 DIN EN : ; VDE : EMC IEC :1997 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 4-17: Testing and measurement techniques; Ripple on d.c. input power port immunity test Electromagnetic compatibility (EMC) Part 4-18: Testing and measurement techniques Damped oscillatory wave immunity test Electromagnetic compatibility (EMC); Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides Electromagnetic compatibility (EMC); Part 4-21: Testing and measurement techniques; Reverberation chamber test methods Electromagnetic compatibility (EMC); Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances Electromagnetic compatibility (EMC); Part 4: Testing and measurement techniques; Section 24: Test methods for protective devices for HEMP conducted disturbance; Basic EMC publication EMC IEC :2015 Electromagnetic compatibility (EMC) Part 4-24: Testing and measurement techniques Test methods for protective devices for HEMP conducted disturbance EMC IEC : A1:2012 DIN EN : ; VDE : EMC IEC : A1:2009 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 4-25: Testing and measurement techniques; HEMP immunity test methods for equipment and systems Electromagnetic compatibility (EMC); Part 4-27: Testing and measurement techniques; Unbalance, immunity test Period of validity: to Translation - Page 7 of 139

8 EMC IEC : A1: A2:2009 DIN EN : ; VDE : EMC IEC :2000 DIN EN : ; VDE : EMC IEC :2008 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test Electromagnetic compatibility (EMC); Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests Electromagnetic compatibility (EMC); Part 4-30: Testing and measurement techniques; Power quality measurement methods EMC IEC :2015 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods EMC IEC : A1: Cor. :2009 DIN EN : ; VDE : EMC CISPR :2014 DIN EN : ; VDE : EMC CISPR :2010 DIN EN : ; VDE : EMC CISPR : A1: A2:2014 DIN EN : ; VDE : Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity Conducted disturbance measurements Specification for radio disturbance and immunity measuring apparatus and methods; Part 2-2: Methods of measurement of disturbances and immunity; Measurement of disturbance power Specification for radio disturbance and immunity measuring apparatus and methods; Part 2-3: Methods of measurement of disturbances and immunity; Radiated disturbance measurements Period of validity: to Translation - Page 8 of 139

9 EMC CISPR :2003 DIN EN : ; VDE : Specification for radio disturbance and immunity measuring apparatus and methods; Part 2-4: Methods of measurement of disturbances and immunity; Immunity measurements EMC CISPR TR :2007 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling Statistics of complaints and a model for the calculation of limits for the protection of radio services EMC CISPR 17:2011 DIN EN 55017: ; VDE : EMC IEC :1996 DIN EN : ; VDE : EMC IEC :2001 DIN EN : ; VDE : EMC DIN EN : ; VDE : Methods of measurement of the suppression characteristics of passive EMC filtering devices Electromagnetic compatibility (EMC); Part 5: Installation and mitigation guidelines; Section 5: Specification of protective devices for HEMP conducted disturbance Electromagnetic compatibility (EMC) Part 5-7: Installation and mitigation guidelines; Degrees of protection by enclosures against electromagnetic disturbances (EM code) Anechoic chambers - Part 1: Shield attenuation measurement; German version EN :1996 Period of validity: to Translation - Page 9 of 139

10 1.1.2 Generic standards * EMC IEC :2005 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 6-1: Generic standards; Immunity for residential, commercial and lightindustrial environments EMC IEC :2005 Electromagnetic compatibility (EMC); DIN EN : ; VDE Part 6-2: Generic standards; Immunity : for industrial environments EMC IEC : A1:2010 DIN EN : ; VDE : Electromagnetic compatibility (EMC); Part 6-3: Generic standards; Emission standard for residential, commercial and light industrial environments EMC IEC : A1:2010 Electromagnetic compatibility (EMC); DIN EN : ; VDE Part 6-4: Generic standards; Emission : standard for industrial environments EMC IEC :2015 Electromagnetic compatibility (EMC) Part 6-5: Generic standards Immunity for equipment used in power station and substation environment EMC IEC :2003 Electromagnetic compatibility (EMC); Part 6-6: Generic standards; HEMP immunity for indoor equipment Product standards * EMC DIN EN : Aerospace series Elements of electrical and optical connection; Test methods; Part 225: RF high potential withstanding voltage EMC DIN EN 15194: Cycles - Electrically power assisted cycles - EPAC Bicycles; German version EN 15194:2009+A1:2011 Test und Annex C (normativ), only Period of validity: to Translation - Page 10 of 139

11 EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz - Part 1: General requirements, frequency bands and electromagnetic disturbances; German version EN :2011 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 khz to 148,5 khz and intended for use in residential, commercial and light industrial environments; German version EN : Corrigendum A1:2005 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 khz to 148,5 khz and intended for use in industrial environments; German version EN : Corrigendum A1:2005 Signalling on low-voltage electrical installations in the frequency range 3 khz to 148,5 khz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 khz to 95 khz and intended for use by electricity suppliers and distributors; German version EN : Corrigendum A1:2005 Period of validity: to Translation - Page 11 of 139

12 EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment; German version EN : A1:2015 Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems; German version EN : A1:2014 EMC DIN EN 50148: Electronic taximeters; German version EN 50148:1995 EMC DIN EN 50270: ; VDE : Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2015 EMC EMC EMC EMC DIN EN 50293: ; VDE : DIN EN : ; VDE : DIN EN : ; VDE : DIN EN : ; VDE : Road traffic signal systems - Electromagnetic compatibility; German version EN 50293:2012 Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) (IEC :2008, modified); German version EN :2013 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission; German version EN :2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity; German version EN :2003 EMC CISPR 11:2015 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Period of validity: to Translation - Page 12 of 139

13 EMC DIN EN 55011: ; VDE : EMC CISPR 12: A1:2009 DIN EN 55012: ; VDE : EMC CISPR 13: A1:2015 DIN EN 55013: ; VDE : EMC CISPR 14-1: A1: Cor. : A2:2011 DIN EN : ; VDE : EMC CISPR 14-2:2015 DIN EN : ; VDE : Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (CISPR 11:2015, modified); German version EN 55011:2016 Vehicles, boats and internal combustion engines Radio disturbance characteristics Limits and methods of measurement for the protection of off-board receivers (CISPR 12: A1:2009) Sound and television broadcast receivers and associated equipment; Radio disturbance characteristics; Limits and methods of measurement Electromagnetic compatibility; Requirements for household appliances, electric tools and similar apparatus; Part 1: Emission Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity Product family standard (CISPR 14-2:2015) EMC CISPR 15: A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EMC CISPR 15: IS1: IS2:2013 DIN EN 55015: ; VDE : EMC CISPR 20: A1:2013 DIN EN 55020: ; VDE : EMC DIN EN 55020/A11: ; VDE /A1: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Sound and television broadcast receivers and associated equipment; Immunity characteristics; Limits and methods of measurement Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement; German version EN 55020:2007/A11:2011 Period of validity: to Translation - Page 13 of 139

14 EMC CISPR 22:2008 DIN EN 55022: ; VDE : EMC CISPR 24: A1:2015 DIN EN 55024: ; VDE : EMC CISPR 32:2015 DIN EN 55032: ; VDE : EMC DIN EN : ; VDE : EMC EMC DIN EN : ; VDE : DIN EN : ; VDE : EMC IEC :2013 DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC IEC :2006 DIN EN : ; VDE : EMC IEC :2006 DIN EN : ; VDE : Information technology equipment; Radio disturbance characteristics; Limits and methods of measurement Information technology equipment; Immunity characteristics; Limits and methods of measurement Electromagnetic compatibility of multimedia equipment Emission requirements Electromagnetic compatibility - Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use - Part 1: Emissions; German version EN : A1:2012 Electromagnetic compatibility - Product family standard for audio, video, audiovisual and entertainment lighting control apparatus for professional use - Part 2: Immunity; German version EN :2009 Rotating electrical machines - Part 1: Rating and performance (IEC :2010, modified); German version EN : Cor.:2010 Safety of machinery Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches (IEC :2002, modified + A1:2008, modified); German version EN : A1:2009 Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) Switches for household and similar electrical installations; Part 2-3: Particular requirements; Time-delay switches (TDS) Period of validity: to Translation - Page 14 of 139

15 EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC IEC :2006 DIN EN : ; VDE : Automatic electrical controls for household and similar use - Part 1: General requirements (IEC :2010, modified); German version EN :2011 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems (IEC :2013, modified); German version EN :2015 Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (IEC :2007, modified); German version EN :2008 Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches (IEC :2008, modified); German version EN :2010 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC :2000, modified + A1:2002, modified); German version EN : A1:2003 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls (IEC :2008, modified); German version EN :2010 Automatic electrical controls for household and similar use; Part 2: Particular requirements for energy regulators Period of validity: to Translation - Page 15 of 139

16 EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC DIN EN : ; VDE : EMC IEC :1995 DIN EN : EMC IEC : A1: A2:2014 DIN EN : ; VDE : EMC IEC : A1: A2:2013) DIN EN : ; VDE : EMC IEC : A1:2012 DIN EN : ; VDE : EMC IEC : A1:2012 DIN EN : ; VDE : Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls (IEC :2006, modified); German version EN :2008 Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators (IEC :1995, modified + A1: A2:2007, modified); German version EN : A1: A11: A2:2008 Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls (IEC :2008, modified); German version EN :2010 Telecontrol equipment and systems; Part 2: Operating conditions; Section 1: Power supply and electromagnetic compatibility Low-voltage switchgear and controlgear - Part 1: General rules Low-voltage switchgear and controlgear - Part 2: Circuit-breakers Low-voltage switchgear and controlgear; Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters Period of validity: to Translation - Page 16 of 139

17 EMC IEC : Cor.:2012 DIN EN : ; VDE : EMC IEC :2014 DIN EN : ; VDE : EMC IEC : A1:2009 DIN EN : ; VDE : EMC IEC : A1:2012 DIN EN : ; VDE : EMC IEC :2013 DIN EN : ; VDE : EMC IEC :1999 DIN EN : ; VDE : EMC IEC : A1:2013 DIN EN : ; VDE : EMC IEC : A1:2007 DIN EN : ; VDE : EMC IEC : A1: A2:2011 DIN EN : ; VDE : Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for nonmotor loads Low-voltage switchgear and controlgear; Part 5-2: Control circuit devices and switching elements; Electromechanical control circuit devices Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) Low-voltage switchgear and controlgear; Part 5-6: Control circuit devices and switching elements; DC interface for proximity sensors and switching amplifiers (NAMUR) Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment Low-voltage switchgear and controlgear; Part 6-2: Multiple function equipment; Section 2: Control and protective switching devices (or equipment) (CPS) Low-voltage switchgear and controlgear; Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines Period of validity: to Translation - Page 17 of 139

18 EMC IEC :2007 DIN EN : ; VDE : EMC (IEC :2014 DIN EN : ; VDE : EMC IEC :2013 DIN EN : ; VDE : EMC IEC :2000 DIN EN : ; VDE : EMC IEC :2011 DIN EN : ; VDE : EMC DIN EN : ; VDE : Arc welding equipment; Part 10: Electromagnetic compatibility (EMC) requirements Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection Electromagnetic compatibility (EMC); Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current 75 A and subject to conditional connection Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and 75 A per phase Residual current operated circuitbreakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules (IEC :2010, modified + A1:2012, modified + A2:2013, modified + A2:2013/Cor.:2014); German version EN : A1: A2: A11:2015 Period of validity: to Translation - Page 18 of 139

19 EMC DIN EN : ; VDE : EMC IEC :2007 DIN EN : VDE : EMC IEC :2000 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : Residual current operated circuitbreakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC :2010, modified + A1:2012, modified + A1:2012/Cor.: A2:2013, modified + A2:2013/Cor.:2014); German version EN : A1: A2: A11: A12:2016 Programmable controllers; Part 2: Equipment requirements and tests Low voltage power supplies, DC output - Part 3: Electromagnetic compatibility (EMC) Electrical equipment for measurement, control and laboratory use; EMC requirements - Part 1: General requirements Electrical equipment for measurement, control and laboratory use; EMC requirements; Part 2-1: Particular requirements; Test configurations, operational conditions and performance criteria for sensitive test and measurements equipment for EMC unprotected applications Electrical equipment for measurement, control and laboratory use; EMC requirements; Part 2-2: Particular requirements; Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distributions systems. Period of validity: to Translation - Page 19 of 139

20 EMC IEC :2012 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : EMC IEC :2012 DIN EN : ; VDE : EMC IEC 61543: A2:2005 DIN EN 61543: ; VDE : EMC IEC 61547:2009 DIN EN 61547: ; VDE : EMC IEC : A1:2011 DIN EN : ; VDE : EMC IEC :2011 DIN EN : ; VDE : EMC IEC :2001 DIN EN : ; VDE : Electrical equipment for measurement, control and laboratory use; EMC requirements; Part 2-3: Particular requirements; Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning. Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC and for equipment for insulation fault location according to IEC Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC Residual current-operated protective devices (RCD's) for household and similar use - Electromagnetic compatibility Equipment for general lighting purposes; EMC immunity requirements Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods Time relays for industrial and residential use - Part 1: Requirements and tests Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station Tests restricted to: 11.3 Period of validity: to Translation - Page 20 of 139

21 EMC IEC :2005 DIN EN : ; VDE : EMC IEC :2003 DIN EN : ; VDE : EMC IEC :2003 DIN EN : ; VDE : EMC IEC :2003 DIN EN : ; VDE : EMC IEC :2003 DIN EN : ; VDE : EMC IEC :2003 DIN EN : ; VDE : Uninterruptible power systems (UPS); Part 2: Electromagnetic compatibility (EMC) requirements Electricity metering equipment (AC); General requirements, tests and test conditions; Part 11: Metering equipment Electricity metering equipment (a.c.); Particular requirements; Part 11: Electromechanical meters for active energy (classes 0.5, 1 and 2) Electricity metering equipment (a.c.); Particular requirements; Part 21: Static meters for active energy (classes 1 and 2) Electricity metering equipment (a.c.); Particular requirements; Part 22: Static meters for active energy (classes 0.2 S and 0.5 S) Electricity metering equipment (a.c.); Particular requirements; Part 23: Static meters for reactive energy (classes 2 and 3) EMC DIN EN 12015: Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission; German version EN 12015:2014 EMC DIN EN 12016: Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity; German version EN 12016:2013 EMC DIN EN 12635: Industrial, commercial and garage doors and gates - Installation and use; German version EN 12635:2002+A1:2008 EMC DIN EN 12895: ; VDE : Industrial trucks - Electromagnetic compatibility; German version EN 12895:2015 EMC DIN EN 13309: Construction machinery - Electromagnetic compatibility of machines with internal power supply; German version EN 13309:2010 Period of validity: to Translation - Page 21 of 139

22 EMC ISO 14982:2009 DIN EN ISO 14982: Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria EMC IEC TS :1998 Electromagnetic compatibility (EMC); Part 3-4: Limits; Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A EMC IEC TS :2009 Electromagnetic compatibility (EMC) - Part 3-5: Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A EMC IEC TR :2008 Electromagnetic compatibility (EMC) Part 3-6: Limits - Assessment of emission limits for distorting loads in MV and EHV power systems EMC IEC TR :2008 Electromagnetic compatibility (EMC); Part 3-7Limits- Assessment of emission limits for the connection of fluctuating loads in MV and HV power systems EMC IEC : Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels EMC DIN EN 45501: Metrological aspects of non-automatic weighing instruments; German version EN 45501:2015 EMC DIN EN : ; VDE : EMC IEC :2011 DIN EN : ; VDE : EMC IEC : A1:2008 DIN EN : ; VDE : EMC IEC :2013 DIN EN : ; VDE : Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks; German version EN :2013 Electroacoustics; Hearing aids; Part 13: Electromagnetic compatibility (EMC) Safety of machinery; Electrical equipment of machines; Part 1: General requirements Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements Tests restricted to: Period of validity: to Translation - Page 22 of 139

23 EMC IEC :2000 DIN EN : EMC ETSI EN V1.2.1 ( ) EMC Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories Radio spectrum Matters (ERM) Radiated emission testing of physically large telecommunication systems ETSI EN V1.6.1: Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements EMC ETSI ES V1.4.1 ( ) Additional Electro Magnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications EMC CISPR TR 18-2:2010 Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits EMC DIN VDE 0873 Beiblatt 2: ; VDE 0873 Beiblatt 2: EMC EMC DIN : ; DIN VDE : ; VDE : DIN : ; DIN VDE : ; VDE : Radio interference characteristics of overhead power lines and high-voltage equipment; part 2: methods of measurement and procedure for determining limits; identical with CISPR 18-2:1986 Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems of 10 kv and above (VDE Guide) Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems below 10 kv and from electrical trains [VDE Specification] Period of validity: to Translation - Page 23 of 139

24 EMC DIN VDE : ; VDE : Radio interference suppression of telecommunication equipment; equipment in telecommunication operating rooms EMC CISPR TR 18-2:2010 Radio interference characteristics of overhead power lines and high-voltage equipment; Part 2: Methods of measurement and procedure for determining limits EMC CISPR TR 30-1:2012 Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps EMF * EMF IEC :2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 khz with regard to exposure of human beings Part 2: Basic standard for measurements EMF IEC 62110:2009 DIN EN 62110: ; VDE : EMF IEC 62233:2005 DIN EN 62233: ; VDE : EMF IEC 62311:2007 DIN EN 62311: ; VDE : EMF DIN EN 50413: ; VDE : Electric and magnetic field levels generated by AC power systems Measurement procedures with regard to public exposure Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz Hz) Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz GHz); German version EN 50413:2008 Period of validity: to Translation - Page 24 of 139

25 EMF Draft DIN VDE : EMF DIN VDE : ; VDE : EMF IEC :2008 DIN EN : ; VDE : Safety in electrical, magnetic and electromagnetic fields - Part 3-1: Protection of persons with active implants in the frequency range 0 Hz to 300 GHz Safety in electric, magnetic and electromagnetic fields; Part 5: Protection against explosion Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems EMF EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure EMF Anderer Ausgabestan d DIN EN 62233: ; VDE : Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure (IEC 62233:2005, modified); German version EN 62233:2008 Period of validity: to Translation - Page 25 of 139

26 EMF DIN EN 50400: ; VDE : Basic standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service; German version EN 50400: AC: A1:2012 Independent or combined with: Product standard to demonstrate the compliance of fixed equipment for radio transmission (110 MHz - 40 GHz) intended for use in wireless telecommunication networks with the basic restrictions or the reference levels related to general public exposure to radio frequency electromagnetic fields, when put into service; German version EN 50401: A1: Automotive * EMC VDE-AR-E : Electric equipment of electric road vehicles Electric vehicle inductive charging systems Part 4-2: Low power range EMC DIN EN 50498: ; VDE : EMC CISPR 25:2008 DIN EN 55025: ; VDE : Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles; German version EN 50498:2010 Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices; Limits and methods of measurement Test , , only Period of validity: to Translation - Page 26 of 139

27 EMC ISO : Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures EMC ISO : Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only EMC ISO : Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMC ISO 10605: Road vehicles -- Test methods for electrical disturbances from electrostatic discharge EMC ISO : Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources EMC ISO : Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation EMC ISO : Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) EMC ISO : Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure EMC ISO : Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell Tests restricted to: 5.6 Period of validity: to Translation - Page 27 of 139

28 EMC ISO : Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods EMC ISO : Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline EMC ISO : ISO :2003/A1:2013 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection EMC ISO : Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields EMC ISO : Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters EMC SAE J1113/1: Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) EMC SAE J1113/4: Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method EMC SAE J1113/11: Immunity to Conducted Transients on Power Leads EMC SAE J1113/12: Electrical Interference by Conduction and Coupling Capacitive and Inductive Coupling via Lines Other than Supply Lines EMC SAE J1113/13: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge Period of validity: to Translation - Page 28 of 139

29 EMC SAE J1113/26: Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields EMC SAE J1113/27: Electromagnetic Compatibility Measurements Procedure for Vehicle Components Part 27 Immunity to Radiated Electromagnetic Fields Mode Stir Reverberation Method EMC ISO : Road Vehicles --Airbag components-- Part 2: Testing of airbag modules EMC /245/EEC; Revision 2006/28/EC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC /24/EC chapter 8 (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC /64/EC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) Regulation (EC) 44/2014 (Annex VII) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) Regulation (EC) 2015/208 (Annex XV, Part 3 5) Regulation (EC) 2015/208 (Annex XV, Part 6 8) UNECE-R 10; Revision 5 Test procedures within the Subscope (Prüfumfang) for approval and market surveillance according to national regulations and for new technologies and concepts 74/61/EEC (Annex VI); Revision 95/56/EC UNECE-R 97; (Part I and II); Revision 1 Period of validity: to Translation - Page 29 of 139

30 EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) EMC (scope classification according to Kraftfahrt-Bundesamt (KBA)) UNECE-R 116 (Part II and III) Test procedures within the Subscope (Prüfumfang) for approval and market surveillance according to national regulations and for new technologies and concepts 74/61/EEC (Annex V); Revision 95/56/EC UNECE-R 97 (Part III); Revision 1 UNECE-R 116 (Part IV) Regulation (EC) 3/2014 (Annex IV) Regulation (EC) 2015/208 (Annex XXIV) UNECE-R 100 (Part I) vehicle; Revision 2 UNECE-R 100 (Part II) Rechargeable Energy Storage Systems (REESS); Revision Airborne Equipment * EMC EUROCAE ED-14G: Environmental conditions and test procedures for airborne equipment EMC EUROCAE ED-14G:Change Environmental conditions and test procedures for airborne equipment Tests restricted to: 1, 2, 3, 15, 16, 17, 18, 19, 20, 21, 22, 23, 25 Tests restricted to : 1, 2, 3, 15, 16,17, 18, 19, 20, 21, 22, 23, 25 Period of validity: to Translation - Page 30 of 139

31 EMC EUROCAE ED-107A: Guide to certification of aircraft in a high intensity radiated field (HIRF) environment EMC EUROCAE ED-130: Guidance for the use of portable electronic devices (PEDs) on board aircraft EMC EMC FAA Advisory Circular AC No:20-136:1990 FAA Advisory Circular AC No:20-136A:2006 Protection of Aircraft electrical/electronic systems against the indirect effects of lightning Protection of Aircraft electrical/electronic systems against the indirect effects of lightning EMC FAA Advisory Circular AC No:20-136B:2011 Aircraft Electrical and Electronic System Lightning Protection EMC MIL-STD-704F: Aircraft Electric Power Characteristics EMC MIL-STD-1541A: Electromagnetic Compatibility Requirements for Space Systems EMC MIL-STD-1757A: Lightning Qualification Test Techniques for Aerospace Vehicles and Hardware EMC RTCA/DO-160G: Environmental conditions and test procedures for airborne equipment EMC RTCA/DO-160G: change Environmental conditions and test procedures for airborne equipment EMC RTCA/DO-294C: Guidance on allowing transmitting portable electronic devices (T-PEDs) on aircraft EMC RTCA/DO-307: Aircraft Design and Certification for Portable Electronic Device (PED) Tolerance EMC RTCA/DO-307, change 1: Aircraft Design and Certification for Portable Electronic Device (PED) Tolerance EMC SAE ARP5412B: Aircraft Lightning Environment and Related Test Waveforms EMC SAE ARP5414: Aircraft Lightning Zoning EMC SAE ARP5416A: Aircraft Lightning Test Methods Tests restricted to: 1, 2, 3, 15, 16, 17, 18, 19, 20, 21, 22, 23, 25 Tests restricted to: 1, 2, 3, 15, 16, 17, 18, 19, 20, 21, 22, 23, Maritime Equipment * Period of validity: to Translation - Page 31 of 139