THIS PAGE WAS INTENTIONALLY LEFT BLANK.

Transcription

1

2 THIS PAGE WAS INTENTIONALLY LEFT BLANK.

3 Table of Contents Transient Suppression Diodes... 1 General Information... 2 P4KE Series 400 Watt... 8 SA Series 500 Watt P6KE Series 600 Watt KE Series 1500 Watt KP Series 3000 Watt KP Series 5000 Watt KP Series Watt KP Series Watt KP Series Watt WLCE Series: Low Capacitance WFC Series P4SMAJ Series 400 Watt Surface Mount P6SMBJ Series 600 Watt Surface Mount SMCJ Series 1500 Watt Surface Mount SMCJ Series 3000 Watt Surface Mount SMCJ Series 5000 Watt Surface Mount SMEJ Series 6600 Watt Surface Mount PA4SMAJ Series PA6SMBJ Series ASMCJ Series Circuit Examples Applications Transient Suppression Diodes World Products, LLC is committed to providing the optimum products for your transient/surge protection problems. Our TVS Diode satisfies the toughest requirements for a low clamping device and provides superior performance in all applications. World Products expands your options... Large selection of equivalents to essentially all TVS Diodes. World Products specifications are designed to provide all of the necessary physical and electrical parameters required for proper component selection. Discover why the first choice in TVS Diodes is WPI. QS 9000 ISO 9002 E N V I R O N M E N TA L S Y S T E M ISO REGISTERED COMPANY SOCIÉTÉ ENREGISTRÉE REGISTERED COMPANY SOCIÉTÉ ENREGISTRÉE TVS Diodes 1

4 General Information TVS Diode Technology World Products Transient Suppression (TVS) Diodes are silicon avalanche devices designed, manufactured, specified and tested according to voltage suppression applications. These devices, with their fast response and low clamping characteristics, protect all MOS technology based devices, hybrids, and other voltage sensitive components. The low clamping factor and pico-second response time of World Products TVS Diodes clamps transient pulses early and maintains them at an acceptable level for their entire duration. In other overvoltage protection devices, response times are delayed by 24nS to 2μs allowing transients to reach dangerous levels. World Products TVS Diodes are designed to meet a 1.30 maximum clamping factor at their rated peak impulse current. This can be compared to clamping factors of 2 to 5 found in other protection devices. TVS Diode Applications TVS Diodes are the optimum choice in protecting computer or data processor circuits and power supplies, airframe avionics and controls, numerically controlled machines, telecom circuits, and many other applications. These devices are designed to protect against transient voltages generated by lightning, electro-static discharge (ESD), and inductive switching. TVS Diode RoHS Compliance All axial TVS Diodes (no suffix code required) and SMD TVS Diodes (denoted by suffix F ) products purchased from World Products, LLC comply to a maximum concentration value of 0.1% by weight in homogeneous materials for lead (Pb), mercury, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) and of 0.01% weight in homogeneous materials for cadmium and are in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive). Note: Lead(Pb) in high-melting point solder for internal connections is not inhibited by RoHS. (i.e. tin-lead solder alloys containing more than 85%) Selecting the Correct Part Type The following guidelines should be observed in selecting the correct diode: TVS Parameters Application Parameters 1. Stand-off (Vwm) >= Operating (Vop) 2. Peak Pulse (Ippm) >= Source Transient (Is) 3. Clamping (Vc) =< Withstand (Vws) 1. If the stand-off voltage is less than the operating voltage of the application, the diode will continually clamp the circuit voltage. 2. The Peak Pulse (Ippm) is the maximum current the TVS can handle. The source transient current is determined by dividing the peak transient voltage by the source impedance this is often difficult to determine. In many cases, however, this may be obtained from industry standard documents, customer requirements, etc. 3. Determine the maximum voltage level that the protected device can withstand (Vws). Select a suppressor which will clamp the transient at a lower level (Vc). Consider the transient source: lightning, electro-static discharge, inductive switching or nuclear explosion (NEMP). Often, a 1500 watt peak pulse rated device will protect against transients due to secondary lightning effects or inductive switching on power, data and telephone lines. A 500 watt device is sufficient to protect sensitive components against transients generated by electro-static discharge. 2 TVS Diodes

5 General Information (continued) Schematic Symbols Definitions of Terms Unidirectional Bidirectional Vc Clamping : Peak voltage across the suppressor measured at a specific Ippm. (Note: due to thermal, reactive or other effects, peak voltage and peak current are not necessarily coincident in time.) Ipp Peak Impulse : Peak current measured using a specified waveform. Ippm Peak Impulse : maximum value of peak impulse current (Ipp) applied using a 10 x 1000μs waveform. (Minimum of 10 pulses applied.) Vwm Standoff : working (continuous) DC or peak voltage which may be applied over the standard operating temperature range. (Note: Vwm of a selected device must be greater than or equal to the maximum operating voltage of the line to be protected.) Id Stand-By : current that flows through the suppressor at rated standoff voltage (Vwm) at a specified temperature. Vbr Breakdown : The voltage measured across the suppressor at a specified DC test current (It). It Test : The specific DC current applied to the suppressor used to determine breakdown voltage (Vbr). Vbr Temperature Coefficient: The ratio of change in breakdown voltage (Vbr) to changes in temperature. Expressed either as millivolts per degree centigrade (mv/ C) or percent change in breakdown voltage per degree centigrade (%Vbr/ C). Cf Clamping Factor: Ratio of the measured clamping voltage (Vc) at specified peak pulse current (Ipp) to breakdown voltage (Vbr) on a specific device. Vc CF = Vbr C Capacitance: Capacitance between the two terminals of a suppressor measured at a specific frequency and bias voltage. Pppm Multiple Peak Pulse Power: Derived by multiplying the maximum clamping voltage (Vc) times the Peak Impulse (Ippm). IFSM Forward Surge : Unidirectional devices only. forward current during a 8.3ms half sine wave of AC line frequency (60Hz). TVS Diodes 3

6 General Information (continued) Impulse Waveform % of Peak Value µs 1000µs Time - µs Mechanical Characteristics Case: UL94V-0 Molded Epoxy Leads: Tinned Copper Bending Terminal Leads (Through-hole) Types When bending the leads, in order to avoid stress to the area where the leads enter the resinous body, use a tool that clamps the point between the package and the bending point. Improper bending will damage the die or separate the resin from the mounting frame, resulting in a degradation in electrical characteristics or a reliability problem such as poor resistance to moisture. The leads must be bent only once and they should not be bent at an angle of more than 90 C. Leads must be formed before fixing them to a printed circuit board. Never form the leads after soldering. Recommended distances are: 2mm for P4KE and SA series. 3mm for 1.5KE series. 4mm for 3KP, 5KP, 15KP, 20KP and 30KP series. Right Jig or Tool Right Jig or Tool 4 TVS Diodes

7 General Information (continued) Solderability Military Standard 202G Method 208H Heat Resistance of Solder Standard Temperature Profile for Lead Solder (Sn-Pb eutectic) Peak temperature: 240 C Max Standard Temperature Profile for Lead-free Solder Peak temperature: 260 C Max Temperature ( C) Preheating area 150 C±10 C 90s±30s Soldering area 235 C±5 C 10s Temperature ( C) Preheating area 150 C±10 C 90s±30s Soldering area 255 C±5 C 10s Time (s) Time (s) Note: For Lead-free solder, the maximum temperature during mounting processes will be 260 C for both re-flow and flow soldering processes. Soldering of Through-hole Mounting Devices Resistance to soldering heat test is carried out under the condition shown below. Soldering should be completed at a lowest possible temperature for a shortest period. Temp. 260± 5 C Duration 10± 1s General requirements for manual soldering are as follows: Use a soldering iron of 30 watts maximum, that is grounded or with a high insulation resistance. The iron tip is kept away from any resinous body. Attachment should be achieved in not more than 3 seconds. Be sure again not to put an excessive mechanical stress on devices, such as a rough insertion of device into a throughhole, or manual reforming of leads after soldering. Axial Lead Devices Solder Temperature ( C) L= 0 L= 5mm L L Duration of Immersion (sec) $0 TVS Diodes 5

8 General Information (continued) Preformed Lead Drawings R R A A C B C Min. 3.0 B C B B A A D M E B C Case type DO-41 package P4KE Series DO-15 package SA Series P6KE Series DO-201AD package 1.5KE Series R-6 package 3KP Series 5KP Series 15KP Series 20KP Series 30KP Series Preformed type A (mm) B (mm) C (mm) D (mm) R (mm) Range Tolerance Range Tolerance Range Tolerance Range Tolerance Range Tolerance M 11~20 ±0.5 8~20 ± max E 11~20 ±0.5 11~16 ±1.0 4~5 ± max B 7.5 ±0.5 19~22 ± ± max. 2.5~4 typ. C 4.5 ±0.8 18~19 ± ± max. 2.5~4 typ. M 13~20 ±0.5 8~22 ± max E 13~20 ±0.5 11~16 ±1.0 4~5 ± max M 15~20 ±1.0 8~22 ± max E 15~20 ±1.0 10~22 ±1.0 3~5 ± max M 15~20 ±1.0 8~22 ± max M 15~20 ±1.0 8~22 ± max Part Marking For Surface Mount Devices For Axial Lead For WFC Series Types Cathode Band Date Code (3 Digit) Example: 10 = 2010, 1 9 = Jan Sept (Use O for October, N for November, D for December) X = Halogen Free (optional 4th Digit) Date Code (3 Digit) Example: 10 = 2010, 1 9 = Jan Sept (Use O for October, N for November, D for December) Cathode Band X = Halogen Free (optional 4th Digit) Date Code Example: 10 = 2010, 1 9 = Jan Sept (Use O for October, N for November, D for December) WP XXX X XXX WP XXX X XXX WP XXX X 1.5KE220A WP XXX X 1.5KE220CA XXXX XXX Part Marking Code. Please refer to the specifications tables for each specific part marking code. Optional (internal factory designation) Optional (internal factory designation) Part Number (reference catalog) Example: WFC L = WFCA-068L = A068 6 TVS Diodes

9 General Information (continued) Part Numbering System Axial Type Example Part Number: P4KE 20 C A Z TR X (1) (2) (3) (4) (5) (6) (7) (1) Series: P4KE = 400 Watt SA = 500 Watt P6KE = 600 Watt 1.5KE = 1500 Watt 3KP = 3000 Watt 5KP = 5000 Watt 15KP = Watt 20KP = Watt 30KP = Watt (2) : 20 = 20V Nominal Breakdown For P4KE, P6KE, 1.5KE Standoff For SA, 3KP, 5KP, 15KP, 20KP, 30KP (3) Polarity: Blank = Unidirectional C = Bidirectional (4) Tolerance: Blank = 10% A = 5% (5) AEC-Q101: Z (where applicable) Surface Mount Type Example Part Number: P4SMAJ 20 C A Z F X (1) (2) (3) (4) (5) (6) (7) (1) Series: P4SMAJ = 400 Watt Surface Mount (2) Stand-Off : 20 = 20V (3) Polarity: Blank = Unidirectional C = Bidirectional (4) Tolerance: Blank = 10% A = 5% (5) AEC-Q101: Z (where applicable) (6) RoHS Compliance: Blank: No Compliance F: RoHS Compliance (7) Halogen Free: X = Halogen Free Note: Surface mount packaging is tape and reel. (6) Packaging: Blank = Bulk TR = Tape and Reel (7) Halogen Free X = Halogen Free Note: All Axial Types are RoHS compliant. WFC Type Refer to complete part number as stated in this catalog on pages All WFC Series parts are RoHS compliant and Halogen Free. TVS Diodes 7

10 P4KE Series 400 Watt P4KE Series Features RoHS Compliance Standard 400 watt peak pulse power dissipation Available in voltages from 6.8V to 550V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 5,000 pieces) Each device 100% surge tested Tape and Reel to EIA Standard RS-296-E UL 497B Recognized, File #E AEC-Q101 Qualified (11A & 11CA 550A & 550CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) Value 400W 1W Operating and storage temperatures -65 C to C Mechanical Dimensions Diameter 0.8 ± 0.1 mm ± in Diameter 2.35 ± 0.35 mm ± in Minimum 25.4 mm 1.0 in Minimum 25.4 mm 1.0 in 4.65 ± 0.55 mm ± in Standard Mounting Pad Layout 1.97 (50.0) 0.19 (3.0) 1.97 (50.0) D NOTE: Dimension D a.) P4KE (DO-41 Package) (9.2) b.) SA / P6KE (DO-15 Package) (11.6) Hole Diameter a.) (1.1) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 8 TVS Diodes

11 P4KE Series 400 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4KE P4KE6.8A P4KE P4KE7.5A P4KE P4KE8.2A P4KE P4KE9.1A P4KE P4KE10A P4KE P4KE11A P4KE P4KE12A P4KE P4KE13A P4KE P4KE15A P4KE P4KE16A P4KE P4KE18A P4KE P4KE20A P4KE P4KE22A P4KE P4KE24A P4KE P4KE27A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 9

12 P4KE Series 400 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4KE P4KE30A P4KE P4KE33A P4KE P4KE36A P4KE P4KE39A P4KE P4KE43A P4KE P4KE47A P4KE P4KE51A P4KE P4KE56A P4KE P4KE62A P4KE P4KE68A P4KE P4KE75A P4KE P4KE82A P4KE P4KE91A P4KE P4KE100A P4KE P4KE110A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 10 TVS Diodes

13 P4KE Series 400 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4KE P4KE120A P4KE P4KE130A P4KE P4KE150A P4KE P4KE160A P4KE P4KE170A P4KE P4KE180A P4KE P4KE200A P4KE P4KE220A P4KE P4KE250A P4KE P4KE300A P4KE P4KE350A P4KE P4KE400A P4KE P4KE440A P4KE480A P4KE510A P4KE530A P4KE540A P4KE550A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 11

14 SA Series 500 Watt SA Series Features RoHS Compliance Standard 500 watt peak pulse power dissipation Available in voltages from 5.0V to 170V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 4,000 pieces) Each device 100% surge tested Tape and Reel to EIA Standard RS-296-E UL 497B Recognized, File #E Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) Value 500W 1W Operating and storage temperatures -55 C to C Mechanical Dimensions Diameter 0.8 ± 0.1 mm ± in Diameter 3.1 ± 0.5 mm (0.122 ± in) Minimum 25.4 mm 1.0 in Minimum 25.4 mm 1.0 in Standard Mounting Pad Layout 1.97 (50.0) 0.19 (3.0) 6.7 ± 0.9 mm (0.265 ± 0.35 in) 1.97 (50.0) D NOTE: Dimension D a.) P4KE (DO-41 Package) (9.2) b.) SA / P6KE (DO-15 Package) (11.6) Hole Diameter a.) (1.1) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 12 TVS Diodes

15 SA Series 500 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) SA SA5.0A SA SA6.0A SA SA6.5A SA SA7.0A SA SA7.5A SA SA8.0A SA SA8.5A SA SA9.0A SA SA10A SA SA11A SA SA12A SA SA13A SA SA14A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 13

16 SA Series 500 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) SA SA15A SA SA16A SA SA17A SA SA18A SA SA20A SA SA22A SA SA24A SA SA26A SA SA28A SA SA30A SA SA33A SA SA36A SA SA40A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 14 TVS Diodes

17 SA Series 500 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) SA SA43A SA SA45A SA SA48A SA SA51A SA SA54A SA SA58A SA SA60A SA SA64A SA SA70A SA SA75A SA SA78A SA SA85A SA SA90A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 15

18 SA Series 500 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) SA SA100A SA SA110A SA SA120A SA SA130A SA SA150A SA SA160A SA SA170A SA180A SA190A SA200A SA210A SA220A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 16 TVS Diodes

19

20 P6KE Series 600 Watt P6KE Series Features RoHS Compliance Standard 600 watt peak pulse power dissipation Available in voltages from 6.8V to 600V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 4,000 pieces) Each device 100% surge tested Tape and Reel to EIA Standard RS-296-E UL 497B Recognized, File # E AEC-Q101 Qualified (11A & 11CA 600A & 600CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Value 600W Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) 5W Operating and storage temperatures -55 C to C Mechanical Dimensions Diameter 0.8 ± 0.1 mm ± in Diameter mm (0.122 ± in) Minimum 25.4 mm 1.0 in mm ( in) Minimum 25.4 mm 1.0 in Standard Mounting Pad Layout 1.97 (50.0) 0.19 (3.0) 1.97 (50.0) D NOTE: Dimension D a.) P4KE (DO-41 Package) (9.2) b.) SA / P6KE (DO-15 Package) (11.6) Hole Diameter a.) (1.1) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 18 TVS Diodes

21 P6KE Series 600 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6KE P6KE6.8A P6KE P6KE7.5A P6KE P6KE8.2A P6KE P6KE9.1A P6KE P6KE10A P6KE P6KE11A P6KE P6KE12A P6KE P6KE13A P6KE P6KE15A P6KE P6KE16A P6KE P6KE18A P6KE P6KE20A P6KE P6KE22A P6KE P6KE24A P6KE P6KE27A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 19

22 P6KE Series 600 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6KE P6KE30A P6KE P6KE33A P6KE P6KE36A P6KE P6KE39A P6KE P6KE43A P6KE P6KE47A P6KE P6KE51A P6KE P6KE56A P6KE P6KE62A P6KE P6KE68A P6KE P6KE75A P6KE P6KE82A P6KE P6KE91A P6KE P6KE100A P6KE P6KE110A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 20 TVS Diodes

23 P6KE Series 600 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6KE P6KE120A P6KE P6KE130A P6KE P6KE150A P6KE P6KE160A P6KE P6KE170A P6KE P6KE180A P6KE P6KE200A P6KE P6KE220A P6KE P6KE250A P6KE P6KE300A P6KE P6KE350A P6KE P6KE400A P6KE P6KE440A P6KE480A P6KE510A P6KE530A P6KE540A P6KE550A P6KE600A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 21

24 1.5KE Series 1500 Watt 1.5KE Series Features RoHS Compliance Standard 1500 watt peak pulse power dissipation Available in voltages from 6.8V to 550V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 1,200 pieces) Each device 100% surge tested Metal hermetically sealed (DO13) version of this diode is available upon request UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E AEC-Q101 Qualified (11A & 11CA 500A & 550CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Value 1500W Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) 5W Operating and storage temperatures -55 C to C Mechanical Dimensions Diameter ± mm ± in Diameter mm / mm / in Minimum 25.4 mm 1.00 in 0.32 ± in 8.35 ± 1.15 mm Minimum 25.4 mm 1.00 in Standard Mounting Pad Layout 1.97 (50.0) D 1.97 (50.0) 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP (P600 Package) (17.1) Hole Diameter a.) (1.5) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 22 TVS Diodes

25 1.5KE Series 1500 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5KE KE6.8A KE KE7.5A KE KE8.2A KE KE9.1A KE KE10A KE KE11A KE KE12A KE KE13A KE KE15A KE KE16A KE KE18A KE KE20A KE KE22A KE KE24A KE Metal hermetically sealed (DO13) version of this diode is available upon request. * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 23

26 1.5KE Series 1500 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5KE27A KE KE30A KE KE33A KE KE36A KE KE39A KE KE43A KE KE47A KE KE51A KE KE56A KE KE62A KE KE68A KE KE75A KE KE82A KE KE91A KE KE100A Metal hermetically sealed (DO13) version of this diode is available upon request. * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 24 TVS Diodes

27 1.5KE Series 1500 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5KE KE110A KE KE120A KE KE130A KE KE150A KE KE160A KE KE170A KE KE180A KE KE200A KE KE220A KE KE250A KE KE300A KE KE350A KE KE400A KE KE440A KE480A KE510A KE530A KE540A KE550A Metal hermetically sealed (DO13) version of this diode is available upon request. * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 25

28 3KP Series 3000 Watt 3KP Series Features RoHS Compliance Standard 3000 watt peak pulse power dissipation Available in voltages from 5V to 220V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 800 pieces) Each device 100% surge tested UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E AEC-Q101 Qualified (11A & 11CA 220A & 220CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Value 3000W Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) 8W Operating and storage temperatures -55 C to C Mechanical Dimensions Diameter 1.25 ± 0.05 mm 0.05 ± in Diameter 8.85 ± 0.25 mm 0.35 ± 0.01 in Minimum 25.4 mm 1.0 in Minimum 25.4 mm 1.0 in Standard Mounting Pad Layout 8.85 ± 0.25 mm 0.35 ± 0.01 in 1.97 (50.0) D 1.97 (50.0) 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP (P600 Package) (17.1) Hole Diameter a.) (1.5) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 26 TVS Diodes

29 3KP Series 3000 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3KP5.0A KP6.0A KP6.5A KP7.0A KP7.5A KP8.0A KP8.5A KP9.0A KP KP10A KP KP11A KP KP12A KP KP13A KP KP14A KP KP15A KP KP16A KP KP17A KP KP18A KP KP20A KP KP22A KP KP24A KP KP26A Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 27

30 3KP Series 3000 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3KP KP28A KP KP30A KP KP33A KP KP36A KP KP40A KP KP43A KP KP45A KP KP48A KP KP51A KP KP54A KP KP58A KP KP60A KP KP64A KP KP70A KP KP75A Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 28 TVS Diodes

31 3KP Series 3000 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3KP KP78A KP KP85A KP KP90A KP KP100A KP KP110A KP KP120A KP KP130A KP KP150A KP KP160A KP KP170A KP KP180A KP KP190A KP KP200A KP KP210A KP KP220A Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 29

32 5KP Series 5000 Watt 5KP Series Features RoHS Compliance Standard 5000 watt peak pulse power dissipation Available in voltages from 5V to 250V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in bulk or tape and reel (Reel quantity = 800 pieces) Each device 100% surge tested UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E AEC-Q101 Qualified (11A & 11CA 250A & 250CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Value 5000W Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) 8W Operating and storage temperatures -55 C to C Mechanical Dimensions Diameter 1.25 mm ± 0.05 mm 0.05 in ± in Diameter 8.85 mm ± 0.25 mm 0.35 in ± 0.01 in Minimum 25.4 mm 1.0 in Minimum 25.4 mm 1.0 in Standard Mounting Pad Layout 8.85 mm ± 0.25 mm 0.35 in ± 0.01 in 1.97 (50.0) D 1.97 (50.0) 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP (P600 Package) (17.1) Hole Diameter a.) (1.5) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 30 TVS Diodes

33 5KP Series 5000 Watt (continued) Electrical Characteristics Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 5KP KP5.0A KP KP6.0A KP KP6.5A KP KP7.0A KP KP7.5A KP KP8.0A KP KP8.5A KP KP9.0A KP KP10A KP KP11A KP KP12A KP KP13A KP KP14A KP KP15A KP KP16A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform TVS Diodes 31

34 5KP Series 5000 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 5KP KP17A KP KP18A KP KP20A KP KP22A KP KP24A KP KP26A KP KP28A KP KP30A KP KP33A KP KP36A KP KP40A KP KP43A KP KP45A KP KP48A KP KP51A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform 32 TVS Diodes

35 5KP Series 5000 Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min Max (ma) (μa) (Volts) (Amperes) 5KP KP54A KP KP58A KP KP60A KP KP64A KP KP70A KP KP75A KP KP78A KP KP85A KP KP90A KP KP100A KP KP110A KP KP120A KP130A KP150A KP160A KP170A KP180A KP190A KP200A KP210A KP220A KP250A * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform TVS Diodes 33

36 15KP Series Watt 15KP Series Features RoHS Compliance Standard watt peak pulse power dissipation Avaliable in voltages from 17V to 280V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Each device 100% surge tested Available in bulk or tape and reel (Reel quantity = 300 or 800 pieces) UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E AEC-Q101 (36A & 36CA) other values pending. (When ordering ADD sufix Z to end of part number) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) Operating and storage temperatures Value 15000W 8W -55 C to +175 C Mechanical Dimensions Diameter Minimum: 1.2 mm, in : 1.3 mm, in Diameter Minimum: 8.6 mm, in : 9.1 mm, in Minimum: 25.4 mm, 1.0 in Minimum: 25.4 mm, 1.0 in Standard Mounting Pad Layout Minimum: 8.6 mm, in : 9.1 mm, in 1.97 (50.0) D 1.97 (50.0) 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP (P600 Package) (17.1) Hole Diameter a.) (1.5) All dimensions in inches and (millimeters) (2.0) 0.28 (7.0) 34 TVS Diodes

37 15KP Series Watt (continued) Electrical Characteristics Part Number* Standoff Vwm Vbr (Volts) Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min (ma) (μa) (Volts) (Amperes) 15KP17A KP18A KP20A KP22A KP24A KP26A KP28A KP KP30A KP KP33A KP KP36A KP KP40A KP KP43A KP KP45A KP KP48A KP KP51A KP KP54A KP KP58A KP KP60A KP KP64A KP KP70A KP KP75A KP KP78A * = Add C or CA suffix for bidirectional device types. # = See General Information for Impulse Waveform TVS Diodes 35

38 15KP Series Watt (continued) Electrical Characteristics (continued) Part Number* Standoff Vwm Vbr (Volts) Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min (ma) (μa) (Volts) (Amperes) 15KP KP85A KP KP90A KP KP100A KP KP110A KP KP120A KP KP130A KP KP150A KP KP160A KP KP170A KP KP180A KP KP200A KP220A KP240A KP260A KP280A * = Add C or CA suffix for bidirectional device types. # = See General Information for Impulse Waveform 36 TVS Diodes

39

40 20KP Series Watt 20KP Series Features RoHS Compliance Standard watt peak pulse power dissipation Avaliable in voltages from 20V to 300V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Each device 100% surge tested Available in bulk or tape and reel (Reel quantity = 800 pieces) UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) Operating and storage temperatures Mechanical Dimensions Diameter Minimum: 1.22 mm, in : 1.32 mm, in Diameter Minimum: 8.6 mm, in : 9.1 mm, in Value 20000W 8W -55 C to +175 C Minimum: 25.4 mm, 1.0 in Minimum: 25.4 mm, 1.0 in Standard Mounting Pad Layout 1.97 (50.0) Minimum: 8.6 mm, in : 9.1 mm, in 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP / 20KP / 30KP (P600 Package) (17.1) 1.97 (50.0) D Hole Diameter a.) (1.5) (2.0) All dimensions in inches and (millimeters) 0.28 (7.0) 38 TVS Diodes

41 20KP Series Watt Electrical Characteristics Part Number* Standoff Vwm Vbr (Volts) Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min (ma) (μa) (Volts) (Amperes) 20KP20A KP24A KP26A KP28A KP30A KP32A KP34A KP36A KP40A KP44A KP48A KP52A KP56A KP60A KP64A KP68A KP72A KP80A KP88A KP96A KP104A KP112A KP120A KP132A KP144A KP160A KP172A KP180A KP192A KP204A KP216A KP232A KP240A KP256A KP280A KP300A * = Add CA suffix for bidirectional device types. # = See General Information for Impulse Waveform TVS Diodes 39

42 30KP Series Watt 30KP Series Features RoHS Compliance Standard watt peak pulse power dissipation Avaliable in voltages from 28V to 288V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Each device 100% surge tested Available in bulk or tape and reel (Reel quantity = 800 pieces) UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-296-E Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C Steady state power dissipation at lead temperature = 75 C (Lead length 3/8 min.) Operating and storage temperatures Mechanical Dimensions Diameter Minimum: 1.22 mm, in : 1.32 mm, in Diameter Minimum: 8.6 mm, in : 9.1 mm, in Value 30000W 8W -55 C to +175 C Minimum: 25.4 mm, 1.0 in Minimum: 25.4 mm, 1.0 in Standard Mounting Pad Layout 1.97 (50.0) Minimum: 8.6 mm, in : 9.1 mm, in 0.19 (3.0) NOTE: Dimension D a.) 1.5KE (DO-201 Package) (15.5) b.) 3KP / 5KP /15KP / 20KP / 30KP (P600 Package) (17.1) 1.97 (50.0) D Hole Diameter a.) (1.5) (2.0) All dimensions in inches and (millimeters) 0.28 (7.0) 40 TVS Diodes

43 30KP Series Watt Electrical Characteristics Part Number* Standoff Vwm Vbr (Volts) Stand Id Vc Max Peak Impulse Ippm# Vwm (Volts) Min (ma) (μa) (Volts) (Amperes) 30KP28A KP30A KP33A KP36A KP39A KP42A KP43A KP45A KP48A KP51A KP54A KP58A KP60A KP64A KP66A KP70A KP71A KP72A KP75A KP78A KP84A KP90A KP96A KP102A KP108A KP120A KP132A KP144A KP150A KP158A KP160A KP168A KP170A KP180A KP198A KP216A KP240A KP258A KP260A KP270A KP280A KP288A * = Add CA suffix for bidirectional device types. # = See General Information for Impulse Waveform TVS Diodes 41

44 WLCE Series Low Capacitance WLCE Series Features RoHS Compliant 1500 WATT Peak Pulse Power capability at waveform Available in voltages 6.5V to 28V Glass Passivated junction Low incremented surge resistance Fast response time: typically less than 5μs from 0 volts to VBR min Ideal for dataline applications JEDEC DO-201 Plastic molded case UL 497B Recognized, File #E Operating junction and storage temperature (-55ºC to + 175ºC) Tape and Reel to EIA Standard RS E Package Dimensions Diameter Minimum: 0.96 mm, in : 1.07 mm, in Diameter Minimum: 4.80 mm, in : 5.30 mm, in Minimum: mm, 1.00 in Minimum: mm, 1.00 in Minimum: 7.20 mm, in : 9.50 mm, in 42 TVS Diodes

45 WLCE Series Low Capacitance Electrical Characteristics Part Number Reverse Stand-Off VRMM Breakdown VBR (V) VBR (V) Test Reverse Peak Pulse IPP Junction 0V Working Inverse Blocking Working Blocking Leaking Peak Inverse Blocking VRWM (V) IT (ma) IR (μa) IPP (A) VC (C) (pf) VWIB (V) IIB (ma) VPIB (V) WLCE6.5A WLCE7.0A WLCE7.5A WLCE8.0A WLCE8.5A WLCE9.0A WLCE10A WLCE11A WLCE12A WLCE13A WLCE14A WLCE15A WLCE16A WLCE17A WLCE18A WLCE20A WLCE22A WLCE24A WLCE26A WLCE28A TVS Diodes 43

46 WFC Series TVS Diodes WFC Series Features High current transient suppressor Excellent Clamping Capability Glass Passivated Junction Bi-directional RoHS Compliant High Temperature soldering: 260 C/10 seconds at terminals UL1449 4th Edition Recognized, File #E (see specific values) Packaging in tray/box: General Lead Series - 20pcs/80pcs Cell Series - 25pcs/100pcs Stack Series - 50pcs/200pcs Absolute Ratings RATING SYMBOL VALUE UNITS Rating IPP 3, 6, 10, 16 KAmps Operating Junction and Storage Temperature Range TJ, TSTG -55 to +150 ºC Package Dimensions General Lead Series A F D C B E WFCA, WFCB, WFCC ( ) SERIES DIMENSIONS DIMENSIONS INCHES MILLIMETERS A ± ± 1.20 B min min. C ± ± 1.20 D max max. E 0.05 ± ± 0.01 F max max. WFCB (430) SERIES DIMENSIONS DIMENSIONS INCHES MILLIMETERS A ± ± 1.20 B min min. C min 2.00 min. D max max. E 0.05 ± ± 0.10 F max max. WFCC (012, 015, 200, 240)/WFCD SERIES DIMENSIONS DIMENSIONS INCHES MILLIMETERS A ± ± 1.20 B min 1.40 min C ± ± 1.20 D max. 16 max. E 0.05 ± ± 0.01 F 0.63 max. 16 max WFCC (430) SERIES DIMENSIONS DIMENSIONS INCHES MILLIMETERS A ± ± 1.20 B min 1.40 min C min min. D max max. E 0.05 ± ± 0.10 F 0.63 max max 44 TVS Diodes

47 WFC Series Package Dimensions (continued) Cell Series A C B WFCA, WFCB, WFCC SERIES DIMENSIONS DIMENSIONS INCHES MILLIMETERS A 0.37 ± ± 0.4 B 0.37 ± ± 0.4 C max. 20 max. Stack Series A DIMENSIONS INCHES MILLIMETERS A 0.37 ± ± 0.4 B C B 0.37 ± ± 0.4 D C ± ± 0.4 D ± ± 0.4 E 0.19 ± ± 0.3 F G t F ± ± 0.2 G max 20 max t ± ± 0.05 E TVS Diodes 45

48 WFC Series TVS Diodes Electrical Characteristics (continued) General Lead Series WFCA Part Number Standoff Cell Series Stack Series VAC (V) VDC (V) Breakdown VBR (V) Test IT (ma) Rating IPP measured with 8/20μS pulse Clamping Reverse Leakage IR VDC WFCA-012L WFCA-012C WFCA-012S KA WFCA-015L WFCA-015C WFCA-015S KA WFCA-020L WFCA-020C WFCA-020S KA WFCA-025L WFCA-025C WFCA-025S KA WFCA-030L WFCA-030C WFCA-030S KA WFCA-042L WFCA-042C WFCA-042S KA WFCA-058L WFCA-058C WFCA-058S KA WFCA-066L WFCA-066C WFCA-066S KA WFCA-076L WFCA-076C WFCA-076S KA WFCA-100L WFCA-100C WFCA-100S KA WFCA-133L WFCA-133C WFCA-133S KA WFCA-170L WFCA-170C WFCA-170S KA WFCA-190L WFCA-190C WFCA-190S KA WFCA-200L WFCA-200C WFCA-200S KA WFCA-240L WFC C WFCA-240S KA WFCA-275L WFCA-275C WFCA-275S KA WFCA-300L WFCA-300C WFCA-300S KA WFCA-380L WFCA-380C WFCA-380S KA WFCA-430L WFCA-430C WFCA-430S KA WFCA-460L WFCA-460C WFCA-460S KA WFCA-500L WFCA-500C WFCA-500S KA WFCB WFCB-012L WFCB-012C WFCB-012S KA WFCB-015L WFCB-015C WFCB-015S KA WFCB-020L WFCB-020C WFCB-020S KA WFCB-025L WFCB-025C WFCB-025S KA WFCB-030L WFCB-030C WFCB-030S KA WFCB-042L WFCB-042C WFCB-042S KA WFCB-058L WFCB-058C WFCB-058S KA WFCB-066L WFCB-066C WFCB-066S KA WFCB-076L WFCB-076C WFCB-076S KA WFCB-100L WFCB-100C WFCB-100S KA WFCB-133L WFCB-133C WFCB-133S KA WFCB-170L WFCB-170C WFCB-170S KA WFCB-190L WFCB-190C WFCB-190S KA WFCB-200L WFCB-200C WFCB-200S KA WFCB-240L WFCB-240C WFCB-240S KA WFCB-275L WFCB-275C WFCB-275S KA WFCB-300L WFCB-300C WFCB-300S KA WFCB-380L WFCB-380C WFCB-380S KA WFCB-430L NA NA KA NOTES: 1. Ta=25ºC unless otherwise specified. 2. Using 8/20 us wave shape pulses as defined in IEC UL1449 4th Edition Recognized, File #E (Pending) 46 TVS Diodes

49 WFC Series TVS Diodes Electrical Characteristics (continued) General Lead Series WFCC Part Number Standoff Cell Series Stack Series VAC (V) VDC (V) Breakdown VBR (V) Test IT (ma) Rating IPP measured with 8/20μS pulse Clamping Reverse Leakage IR VDC WFCC-012L WFCC-012C WFCC-012S KA WFCC-015L WFCC-015C WFCC-015S KA WFCC-020L WFCC-020C WFCC-020S KA WFCC-025L WFCC-025C WFCC-025S KA WFCC-030L WFCC-030C WFCC-030S KA WFCC-042L WFCC-042C WFCC-042S KA WFCC-058L WFCC-058C WFC-058S KA WFCC-066L WFCC-066C WFCC-066S KA WFCC-076L WFCC-076C WFCC-076S KA WFCC-100L WFCC-100C WFCC-100S KA WFCC-133L WFCC-133C WFCC-133S KA WFCC-170L WFCC-170C WFCC-170S KA WFCC-190L WFCC-190C WFCC-190S KA WFCC-200L NA NA KA WFCC-240L NA NA KA WFCC-430L NA NA KA WFCD WFCD-012L NA NA KA WFCD-015L NA NA KA WFCD-020L NA NA KA WFCD-025L NA NA KA WFCD-030L NA NA KA WFCD-042L NA NA KA WFCD-058L NA NA KA WFCD-066L NA NA KA WFCD-076L NA NA KA WFCD-100L NA NA KA WFCD-133L NA NA KA WFCD-170L NA NA KA WFCD-190L NA NA KA WFCD-200L NA NA KA NOTES: 1. Ta=25ºC unless otherwise specified. 2. Using 8/20 us wave shape pulses as defined in IEC UL1449 4th Edition Recognized, File #E (Pending) TVS Diodes 47

50 WFC Series FLOW/WAVE SOLDERING RECOMMENDATION PARAMETERS Flow/wave Soldering 300 Preheating Wave 260ºC Soldering Cooling 250 TEMPERATURE (ºC) TIME (MINUTES) Peak Temperature: 265ºC Dipping Time: 10 seconds Soldering: 1 time PEAK POWER DERATING 120 PERCENT OF RATED VALUE AMBIENT TEMPERATURE (ºC) 48 TVS Diodes

51 P4SMAJ Series 400 Watt Surface Mount P4SMAJ Series Features RoHS Compliance Standard 400 watt peak pulse power dissipation Available in voltages from 5.0V to 440V Unidirectional and bidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 5,000 pieces) Each device 100% surge tested Tape and Reel to EIA Standard RS A UL 497B Recognized, File #E AEC-Q101 Qualified (11A & 11CA - 440A & 440CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Value Peak pulse power dissipation (PPPM) at 25 C 400W Operating and storage temperatures -55 C to C Mechanical Characteristics DO214AC package UL94V-0 Thermoset Epoxy Solder plated terminals Solderable per MIL-STD-750 Method 2026 Mechanical Dimensions ± mm ± in 1.5 ± 0.1 mm ± in 2.7 ± 0.2 mm ± in mm in ± mm ± in 4.3 ± 0.3 mm ± in ± mm ± in 5.04 ± 0.24 mm ± 0.01 in Standard Mounting Pad Layout MAX. (2.69 MAX.) MIN. (2.10 MIN.) MIN. (1.27 MIN.) REF. All dimensions in inches and (millimeters) TVS Diodes 49

52 P4SMAJ Series 400 Watt Surface Mount (continued) Electrical Characteristics Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4SMAJ5.0 HD TD P4SMAJ5.0A HE/AE TE/WE P4SMAJ6.0 HF TF P4SMAJ6.0A HG/AG TG/WG P4SMAJ6.5 HH TH P4SMAJ6.5A HK/AK TK/WK P4SMAJ7.0 HL TL P4SMAJ7.0A HM/AM TM/WM P4SMAJ7.5 HN TN P4SMAJ7.5A HP/AP TP/WP P4SMAJ8.0 HQ TQ P4SMAJ8.0A HR/AR TR/WR P4SMAJ8.5 HS TS P4SMAJ8.5A HT/AT TT/WT P4SMAJ9.0 HU TU P4SMAJ9.0A HV/AV TV/WV P4SMAJ10 HW TW P4SMAJ10A HX/AX TX/WX P4SMAJ11 HY TY P4SMAJ11A HZ/AZ TZ/WZ P4SMAJ12 ID UD P4SMAJ12A IE/BE UE/XE P4SMAJ13 IF UF P4SMAJ13A IG/BG UG/XG P4SMAJ14 IH UH P4SMAJ14A IK/BK UK/XK * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 50 TVS Diodes

53 P4SMAJ Series 400 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4SMAJ15 IL UL P4SMAJ15A IM/BM UM/XM P4SMAJ16 IN UN P4SMAJ16A IP/BP UP/XP P4SMAJ17 IQ UQ P4SMAJ17A IR/BR UR/XR P4SMAJ18 IS US P4SMAJ18A IT/BT UT/XT P4SMAJ20 IU UU P4SMAJ20A IV/BV UV/XV P4SMAJ22 IW UW P4SMAJ22A IX/BX UX/XX P4SMAJ24 IY UY P4SMAJ24A IZ/BZ UZ/XZ P4SMAJ26 JD VD P4SMAJ26A JE/CE VE/YE P4SMAJ28 JF VF P4SMAJ28A JG/CG VG/YG P4SMAJ30 JH VH P4SMAJ30A JK/CK VK/YK P4SMAJ33 JL VL P4SMAJ33A JM/CM VM/YM P4SMAJ36 JN VN P4SMAJ36A JP/CP VP/YP P4SMAJ40 JQ VQ P4SMAJ40A JR/CR VR/YR * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 51

54 P4SMAJ Series 400 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4SMAJ43 JS VS P4SMAJ43A JT/CT VT/YT P4SMAJ45 JU VU P4SMAJ45A JV/CV VV/YV P4SMAJ48 JW VW P4SMAJ48A JX/CX VX/YX P4SMAJ51 JY VY P4SMAJ51A JZ/CZ VZ/YZ P4SMAJ54 RD WD P4SMAJ54A RE WE/ZE P4SMAJ58 RF WF P4SMAJ58A RG WG/ZG P4SMAJ60 RH WH P4SMAJ60A RK WK/ZK P4SMAJ64 RL WL P4SMAJ64A RM WM/ZM P4SMAJ70 RN WN P4SMAJ70A RP WP/ZP P4SMAJ75 RQ WQ P4SMAJ75A RR WR/ZR P4SMAJ78 RS WS P4SMAJ78A RT WT/ZT P4SMAJ85 RU WU P4SMAJ85A RV WV/ZV P4SMAJ90 RW WW P4SMAJ90A RX WX/ZX * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 52 TVS Diodes

55 P4SMAJ Series 400 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P4SMAJ100 RY WY P4SMAJ100A RZ WZ/ZZ P4SMAJ110 SD XD P4SMAJ110A SE XE/VE P4SMAJ120 SF XF P4SMAJ120A SG XG/VG P4SMAJ130 SH XH P4SMAJ130A SK XK/VK P4SMAJ150 SL XL P4SMAJ150A SM XM/VM P4SMAJ160 SN XN P4SMAJ160A SP XP/VP P4SMAJ170 SQ XQ P4SMAJ170A SR XR/VR P4SMAJ180A ST VT P4SMAJ190A SU YU P4SMAJ200A SV VV P4SMAJ210A SW YW P4SMAJ220A GE VX P4SMAJ250A SZ VZ P4SMAJ300A TE UE P4SMAJ350A TG UG P4SMAJ400A TK UK P4SMAJ440A TM UM * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 53

56

57 P6SMBJ Series 600 Watt Surface Mount P6SMBJ Series Features RoHS Compliance Standard 600 watt peak pulse power dissipation Available in voltages from 5.0V to 440V Unidirectional and bidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 3,000 pieces) Each device 100% surge tested Tape and Reel to EIA Standard RS-481-A UL 497B Recognized, File # E AEC-Q101 Qualified (8.0A & 8.0CA 440A & 440CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Peak pulse power dissipation (PPPM) at 25 C 600W Steady state power dissipation at 25 C 5W Operating and storage temperatures -55 C to C Value Mechanical Characteristics DO214AA package UL94V-0 Thermoset Epoxy Solder plated terminals Solderable per MIL-STD-750 Method 2026 Mechanical Dimensions ± mm ± in ± mm ± in ± mm 0.17 ± 0.01 in 3.62 ± 0.32 mm ± in mm in ± mm ± in ± mm ± in 5.40 ± 0.19 mm ± in Standard Mounting Pad Layout MAX. (2.69 MAX.) MIN. (2.10 MIN.) MIN. (1.27 MIN.) REF. All dimensions in inches and (millimeters) TVS Diodes 55

58 P6SMBJ Series 600 Watt Surface Mount (continued) Electrical Characteristics Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6SMBJ5.0 KD AD P6SMBJ5.0A KE AE P6SMBJ6.0 KF AF P6SMBJ6.0A KG AG P6SMBJ6.5 KH AH P6SMBJ6.5A KK AK P6SMBJ7.0 KL AL P6SMBJ7.0A KM AM P6SMBJ7.5 KN AN P6SMBJ7.5A KP AP P6SMBJ8.0 KQ AQ P6SMBJ8.0A KR AR P6SMBJ8.5 KS AS P6SMBJ8.5A KT AT P6SMBJ9.0 KU AU P6SMBJ9.0A KV AV P6SMBJ10 KW AW P6SMBJ10A KX AX P6SMBJ11 KY AY P6SMBJ11A KZ AZ P6SMBJ12 LD BD P6SMBJ12A LE BE P6SMBJ13 LF BF P6SMBJ13A LG BG P6SMBJ14 LH BH P6SMBJ14A LK BK * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 56 TVS Diodes

59 P6SMBJ Series 600 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6SMBJ15 LL BL P6SMBJ15A LM BM P6SMBJ16 LN BN P6SMBJ16A LP BP P6SMBJ17 LQ BQ P6SMBJ17A LR BR P6SMBJ18 LS BS P6SMBJ18A LT BT P6SMBJ20 LU BU P6SMBJ20A LV BV P6SMBJ22 LW BW P6SMBJ22A LX BX P6SMBJ24 LY BY P6SMBJ24A LZ BZ P6SMBJ26 MD CD P6SMBJ26A ME CE P6SMBJ28 MF CF P6SMBJ28A MG CG P6SMBJ30 MH CH P6SMBJ30A MK CK P6SMBJ33 ML CL P6SMBJ33A MM CM P6SMBJ36 MN CN P6SMBJ36A MP CP P6SMBJ40 MQ CQ P6SMBJ40A MR CR * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 57

60 P6SMBJ Series 600 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6SMBJ43 MS CS P6SMBJ43A MT CT P6SMBJ45 MU CU P6SMBJ45A MV CV P6SMBJ48 MW CW P6SMBJ48A MX CX P6SMBJ51 MY CY P6SMBJ51A MZ CZ P6SMBJ54 ND DD P6SMBJ54A NE DE P6SMBJ58 NF DF P6SMBJ58A NG DG P6SMBJ60 NH DH P6SMBJ60A NK DK P6SMBJ64 NL DL P6SMBJ64A NM DM P6SMBJ70 NN DN P6SMBJ70A NP DP P6SMBJ75 NQ DQ P6SMBJ75A NR DR P6SMBJ78 NS DS P6SMBJ78A NT DT P6SMBJ85 NU DU P6SMBJ85A NV DV P6SMBJ90 NW DW P6SMBJ90A NX DX * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 58 TVS Diodes

61 P6SMBJ Series 600 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) P6SMBJ100 NY DY P6SMBJ100A NZ DZ P6SMBJ110 PD ED P6SMBJ110A PE EE P6SMBJ120 PF EF P6SMBJ120A PG EG P6SMBJ130 PH EH P6SMBJ130A PK EK P6SMBJ150 PL EL P6SMBJ150A PM EM P6SMBJ160 PN EN P6SMBJ160A PP EP P6SMBJ170 PQ EQ P6SMBJ170A PR ER P6SMBJ180A PT ET P6SMBJ190A PA EC P6SMBJ200A PV EV P6SMBJ210A PB ED P6SMBJ220A PX EX P6SMBJ250A PZ EZ P6SMBJ300A QE FE P6SMBJ350A QG FG P6SMBJ400A QK FK P6SMBJ440A QM FM * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 59

62

63 1.5SMCJ Series 1500 Watt Surface Mount 1.5SMCJ Series Features RoHS Compliance Standard 1500 watt peak pulse power dissipation Available in voltages from 5.0V to 440V Unidirectional and bidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 3,000 pieces) Each device 100% surge tested UL 497B Recognized, File # E Tape and Reel to EIA Standard RS-481-A Gull-wing lead frame may be available upon request AEC-Q101 Qualified (11A & 11CA - 440A & 440CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Value Peak pulse power dissipation (PPPM) at 25 C 1500W Operating and storage temperatures -55 C to C Mechanical Characteristics DO214AB package UL94V-0 Thermoset Epoxy Solder plated terminals Solderable per MIL-STD-750 Method 2026 Mechanical Dimensions ± mm ± in mm mm in in 6.86 ± 0.24 mm 0.27 ± 0.01 in 5.9 ± 0.32 mm ± in mm in ± mm ± in 7.94 ± 0.19 mm ± in mm mm in in Standard Mounting Pad Layout MAX. (4.69 MAX.) MIN. (3.07 MIN.) MIN. (1.52 MIN.) REF. All dimensions in inches and (millimeters) TVS Diodes 61

64 1.5SMCJ Series 1500 Watt Surface Mount (continued) Electrical Characteristics Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5SMCJ5.0 GDD BDD SMCJ5.0A GDE BDE SMCJ6.0 GDF BDF SMCJ6.0A GDG BDG SMCJ6.5 GDH BDH SMCJ6.5A GDK BDK SMCJ7.0 GDL BDL SMCJ7.0A GDM BDM SMCJ7.5 GDN BDN SMCJ7.5A GDP BDP SMCJ8.0 GDQ BDQ SMCJ8.0A GDR BDR SMCJ8.5 GDS BDS SMCJ8.5A GDT BDT SMCJ9.0 GDU BDU SMCJ9.0A GDV BDV SMCJ10 GDW BDW SMCJ10A GDX BDX SMCJ11 GDY BDY SMCJ11A GDZ BDZ SMCJ12 GED BED SMCJ12A GEE BEE SMCJ13 GEF BEF SMCJ13A GEG BEG SMCJ14 GEH BEH SMCJ14A GEK BEK * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 62 TVS Diodes

65 1.5SMCJ Series 1500 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5SMCJ15 GEL BEL SMCJ15A GEM BEM SMCJ16 GEN BEN SMCJ16A GEP BEP SMCJ17 GEQ BEQ SMCJ17A GER BER SMCJ18 GES BES SMCJ18A GET BET SMCJ20 GEU BEU SMCJ20A GEV BEV SMCJ22 GEW BEW SMCJ22A GEX BEX SMCJ24 GEY BEY SMCJ24A GEZ BEZ SMCJ26 GFD BFD SMCJ26A GFE BFE SMCJ28 GFF BFF SMCJ28A GFG BFG SMCJ30 GFH BFH SMCJ30A GFK BFK SMCJ33 GFL BFL SMCJ33A GFM BFM SMCJ36 GFN BFN SMCJ36A GFP BFP SMCJ40 GFQ BFQ SMCJ40A GFR BFR * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 63

66 1.5SMCJ Series 1500 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5SMCJ43 GFS BFS SMCJ43A GFT BFT SMCJ45 GFU BFU SMCJ45A GFV BFV SMCJ48 GFW BFW SMCJ48A GFX BFX SMCJ51 GFY BFY SMCJ51A GFZ BFZ SMCJ54 GGD BGD SMCJ54A GGE BGE SMCJ58 GGF BGF SMCJ58A GGG BGG SMCJ60 GGH BGH SMCJ60A GGK BGK SMCJ64 GGL BGL SMCJ64A GGM BGM SMCJ70 GGN BGN SMCJ70A GGP BGP SMCJ75 GGQ BGQ SMCJ75A GGR BGR SMCJ78 GGS BGS SMCJ78A GGT BGT SMCJ85 GGU BGU SMCJ85A GGV BGV SMCJ90 GGW BGW SMCJ90A GGX BGX * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 64 TVS Diodes

67 1.5SMCJ Series 1500 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking Bi Part Marking Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 1.5SMCJ100 GGY BGY SMCJ100A GGZ BGZ SMCJ110 GHD BHD SMCJ110A GHE BHE SMCJ120 GHF BHF SMCJ120A GHG BHG SMCJ130 GHH BHH SMCJ130A GHK BHK SMCJ150 GHL BHL SMCJ150A GHM BHM SMCJ160 GHN BHN SMCJ160A GHP BHP SMCJ170 GHQ BHQ SMCJ170A GHR BHR SMCJ180A GHT BHT SMCJ190A GHU BHU SMCJ200A GHV BHV SMCJ210A GHW BHW SMCJ220A GHX BHX SMCJ250A GHZ BHZ SMCJ300A GJE BJE SMCJ350A GJG BJG SMCJ400A GJK BJK SMCJ440A GJM BJM * = Add C or CA suffix for bidirectional device types. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 65

68

69 3.0SMCJ Series 3000 Watt Surface Mount 3.0SMCJ Series Features RoHS Compliance Standard 3000 watt peak pulse power dissipation Available in voltages from 5.0V to 220V Unidirectional and bidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 3,000 pieces) Each device 100% surge tested UL 497B Recognized, File # E Tape and Reel to EIA Standard RS A Gull-wing lead frame may be available upon request AEC-Q101 Qualified (8.0A & 8.0CA 220A & 220CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Value Peak pulse power dissipation (PPPM) at 25 C 3000W Operating and storage temperatures -55 C to C Mechanical Characteristics DO214AB package UL94V-0 Thermoset Epoxy Solder plated terminals Solderable per MIL-STD-750 Method 2026 Mechanical Dimensions ± mm ± in mm mm in in 6.86 ± 0.24 mm 0.27 ± 0.01 in 5.9 ± 0.32 mm ± in mm in ± mm ± in 7.94 ± 0.19 mm ± in mm mm in in Standard Mounting Pad Layout MAX. (4.69 MAX.) MIN. (3.07 MIN.) MIN. (1.52 MIN.) REF. All dimensions in inches and (millimeters) TVS Diodes 67

70 3.0SMCJ Series 3000 Watt Surface Mount (continued) Electrical Characteristics Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3.0SMCJ5.0 HDD IDD SMCJ5.0A HDE/RDE IDE/DDE SMCJ6.0 HDF IDF SMCJ6.0A HDG/RDG IDG/DDG SMCJ6.5 HDH IDH SMCJ6.5A HDK/RDK IDK/DDK SMCJ7.0 HDL IDL SMCJ7.0A HDM/PDM IDM/DDM SMCJ7.5 HDN IDN SMCJ7.5A HDP/PDP IDP/DDP SMCJ8.0 HDQ IDQ SMCJ8.0A HDR/PDR IDR/DDR SMCJ8.5 HDS IDS SMCJ8.5A HDT/PDT IDT/DDT SMCJ9.0 HDU IDU SMCJ9.0A HDV/PDV IDV/DDV SMCJ10 HDW IDW SMCJ10A HDX/PDX IDX/DDX SMCJ11 HDY IDY SMCJ11A HDZ/PDZ IDZ/DDZ SMCJ12 HED IED SMCJ12A HEE/PEE IEE/DEE SMCJ13 HEF IEF SMCJ13A HEG/PEG IEG/DEG SMCJ14 HEH IEH SMCJ14A HEK/PEK IEK/DEK * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 68 TVS Diodes

71 3.0SMCJ Series 3000 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3.0SMCJ15 HEL IEL SMCJ15A HEM/PEM IEM/DEM SMCJ16 HEN IEN SMCJ16A HEP/PEP IEP/DEP SMCJ17 HEQ IEQ SMCJ17A HER/PER IER/DER SMCJ18 HES IES SMCJ18A HET/PET IET/DET SMCJ20 HEU IEU SMCJ20A HEV/PEV IEV/DEV SMCJ22 HEW IEW SMCJ22A HEX/PEX IEX/DEX SMCJ24 HEY IEY SMCJ24A HEZ/PEZ IEZ/DEZ SMCJ26 HFD IFD SMCJ26A HFE/PFE IFE/DFE SMCJ28 HFF IFF SMCJ28A HFG/PFG IFG/DFG SMCJ30 HFH IFH SMCJ30A HFK/PFK IFK/DFK SMCJ33 HFL IFL SMCJ33A HFM/PFM IFM/DFM SMCJ36 HFN IFN SMCJ36A HFP/PFP IFP/DFP SMCJ40 HFQ IFQ SMCJ40A HFR/PFR IFR/DFR * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 69

72 3.0SMCJ Series 3000 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3.0SMCJ43 HFS IFS SMCJ43A HFT/PFT IFT/DFT SMCJ45 HFU IFU SMCJ45A HFV/PFV IFV/DFV SMCJ48 HFW IFW SMCJ48A HFX/PFX IFX/DFX SMCJ51 HFY IFY SMCJ51A HFZ/PFZ IFZ/DFZ SMCJ54 HGD IGD SMCJ54A HGE/PGE IGE/DGE SMCJ58 HGF IGF SMCJ58A HGG/PGG IGG/DGG SMCJ60 HGH IGH SMCJ60A HGK/PGK IGK/DGK SMCJ64 HGL IGL SMCJ64A HGM/PGM IGM/DGM SMCJ70 HGN IGN SMCJ70A HGP/PGP IGP/DGP SMCJ75 HGQ IGQ SMCJ75A HGR/PGR IGR/DGR SMCJ78 HGS IGS SMCJ78A HGT/PGT IGT/DGT SMCJ85 HGU IGU SMCJ85A HGV/PGV IGV/DGV SMCJ90 HGW IGW SMCJ90A HGX/PGX IGX/DGX * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 70 TVS Diodes

73 3.0SMCJ Series 3000 Watt Surface Mount (continued) Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 3.0SMCJ100 HGY IGY SMCJ100A HGZ/PGZ IGZ/DGZ SMCJ110 HHD IHD SMCJ110A HHE/PHE IHE/DHE SMCJ120 HHF IHF SMCJ120A HHG/PHG IHG/DHG SMCJ130 HHH IHH SMCJ130A HHK/PHK IHK/DHK SMCJ150 HHL IHL SMCJ150A HHM/PHM IHM/DHM SMCJ160 HHN IHN SMCJ160A HHP/PHP IHP/DHP SMCJ170 HHQ IHQ SMCJ170A HHR/PHR IHR/DHR SMCJ180A HHT IHT SMCJ190A HHV IHV SMCJ200A HHX IHX SMCJ210A HHZ IHZ SMCJ220A HIE IIE * = Add C or CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. TVS Diodes 71

74

75 5.0SMCJ Series 5000 Watt Surface Mount 5.0SMCJ Series Features RoHS Compliance Standard 5000 watt peak pulse power dissipation Available in voltages from 11V to 170V Unidirectional and Bidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 3,000 pieces) Each device 100% surge tested UL 497B Recognized, File # E Tape and Reel to EIA Standard RS A Gull-wing lead frame may be available upon request AEC-Q101 Qualified (22A & 22CA 170A & 170CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Parameter Value Peak pulse power dissipation (PPPM) at 25 C 5000W Operating and storage temperatures -55 C to C Mechanical Characteristics DO214AB package UL94V-0 Thermoset Epoxy Solder plated terminals Solderable per MIL-STD-750 Method 2026 Mechanical Dimensions ± mm ± in mm mm in in 6.86 ± 0.24 mm 0.27 ± 0.01 in 5.9 ± 0.32 mm ± in mm in ± mm ± in 7.94 ± 0.19 mm ± in mm mm in in Standard Mounting Pad Layout MAX. (4.69 MAX.) MIN. (3.07 MIN.) MIN. (1.52 MIN.) REF. All dimensions in inches and (millimeters) TVS Diodes 73

76 5.0SMCJ Series 5000 Watt Surface Mount Electrical Characteristics (continued) Part Number* Uni Part Marking** Bi Part Marking** Standoff Vwm Breakdown Vbr Stand Id Vc Max Peak Impulse Ippm# (Volts) Min Max (ma) (μa) (Volts) (Amperes) 5.0SMCJ11A 5PEN 5BEN SMCJ12A 5PEP 5BEP SMCJ13A 5PEQ 5BEQ SMCJ14A 5PER 5BER SMCJ15A 5PES 5BES SMCJ16A 5PET 5BET SMCJ17A 5PEU 5BEU SMCJ18A OET/5PEV 5BEV SMCJ20A OEV/5PEW 5BEW SMCJ22A OEX/5PEX 5BEX SMCJ24A OEZ/5PEZ 5BEZ SMCJ26A OFE/5PFE 5BFE SMCJ28A OFG/5PFG 5BFG SMCJ30A OFK/5PFK 5BFK SMCJ33A OFM/5PFM 5BFM SMCJ36A OFP/5PFP 5BFP SMCJ40A 5PFR 5BFR SMCJ43A 5PFT 5BFT SMCJ45A 5PFV 5BFV SMCJ48A 5PFX 5BFX SMCJ51A 5PFZ 5BFZ SMCJ54A 5PGE 5BGE SMCJ58A 5PGG 5BGG SMCJ60A 5PGK 5BGK SMCJ64A 5PGM 5BGM SMCJ70A 5PGP 5BGP SMCJ75A 5PGR 5BGR SMCJ78A 5PGT 5BGT SMCJ85A 5PGV 5BGV SMCJ90A 5PGX 5BGX SMCJ100A 5PGZ 5BGZ SMCJ110A 5PHE 5BHE SMCJ120A 5PHG 5BHG SMCJ130A 5PHK 5BHK SMCJ150A 5PHM 5BHM SMCJ160A 5PHP 5BHP SMCJ170A 5PHR 5BHR * = Add CA suffix for bidirectional device types. ** = There may be two potential codes depending on factory designation. + = For Bidirectional Types Having VWM <= 10V, their ID limit is doubled. # = See General Information for Impulse Waveform. 74 TVS Diodes

77 6.6SMEJ Series 6600 Watt Surface Mount 6.6SMEJ Series Features RoHS Compliance Standard 6600 watt peak pulse power dissipation Available in voltages from 20V to 48V Unidirectional Glass passivated junction Low clamping factor Available in tape and reel (Reel quantity = 700 pieces) Meets MSL Level 1, per J-STD-020 Tape and Reel to EIA Standard RS A Meets AEC-Q101 requirements. Absolute Ratings and Characteristics Rating Symbol Value Units Peak pulse power dissipation 10/1000µs waveform P PPM min W Surge Discharge current 10/1000µs waveform I PP See table A Operating junction and Storage Temperature range T J, T STG -55 to +175 ºC Dimensions Cathode M C E F K A D G H I J B L Symbol Millimeters Millimeters Symbol Min. Nom. Max. Min. Nom. Max. A H B I C J D K E L F M G TVS Diodes 75

78 6.6SMEJ Series 6600 Watt Surface Mount Electrical Characteristics Part Number* Marking Standoff V RWM (V) Breakdown Vbr Surge Discharge Clamping Reverse Leakage (Volts) Min. Max. (ma) I PP V C PP I R DC 6.6SMEJ20AG 20A SMEJ22AG 22A SMEJ24AG 24A SMEJ26AG 26A SMEJ28AG 28A SMEJ30AG 30A SMEJ33AG 33A SMEJ36AG 36A SMEJ40AG 40A SMEJ43AG 43A SMEJ48AG 48A TVS Diodes

79 PA4SMAJ Series PA4SMAJ Series Features RoHS Compliance Standard For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction SMAJ/DO-214AC Low inductance Excellent clamping capability Repetition Rate (duty cycle): 0.01% Fast response time: typically less than 1.0 ps from 0 Volts to VBR for unidirectional types Typical IR less than 1µA above 10V High Temperature soldering: 260 C/10 seconds at terminals UL497B Recognized, File #E Tape and Reel to EIA Standard RS A (Reel Quantity = 5000 pieces) AEC-Q101 Qualified (9.1A & 9.1CA 550A & 550CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Ratings at 25ºC ambient temperature unless otherwise specified. Rating Symbol Value Units Peak pulse power dissipation on 10/1000µs waveform. (Note1 & 2, Fig. 1) PPPM Minimum 400 Watts Peak Pulse on 10/1000µs waveform. (Note 1, Fig. 2) IPPM See Table Amps Steady State Power Dissipation at TL = 75ºC. Lead lenghths.375 in. (9.5mm). (Note 2, Fig. 5) PM(AV) 3.3 Watts Peak Forward Surge, 8.3ms Single Half Sine-Wave Superimposed on Load (JEDEC Method). (Note 3, Fig. 6) IFSM 40 Amps Operating junction and Storage Temperature Range. TJ, TSTG -65 to +150 ºC Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA= 25ºC per Fig Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal ms single half sine-wave or equivalent square wave. Duty Cycle = 4 pulses per minute maximum. Mechanical Characteristics Case: JEDEC DO214AC. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bi-directional Standard Packaging: 12mm tape (EIA STD RS-481) Weight: ounce, grams Devices for Bipolar Application For bi-directional use CA suffix for types PA4SMAJ 6.8CA thru types PA4SMAJ 550CA, electrical characteristics apply in both directions. TVS Diodes 77

80 Mechanical Dimensions Cathode Band t D1 D s L d T T1 Item Millimeters Inches Min. Max. Min. Max. L D D T T d s t Ratings and Characteristics Curves (TA = 25ºC unless otherwise noted) P PPM -Peak Pulse Power (kw) Figure 1 - Peak Pulse Power Rating Curve x0.2" (5.0x5.0mm) Copper Pad Area t d -Pulse Width (sec.) Figure 2 - Pulse Derating Curve Peak Pulse Power (P PP ) or (I PP ) Derating in Percentage % T A -Ambient temperature (ºC) I PPM - Peak Pulse, % I RSM Figure 3 - Pulse Waveform td tr=10µsec Peak Value IPPM Half Value IPPM IPPM ( 2 ) TJ=25 C Pulse Width(td) is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec. Waveform as defined by R.E.A t-time (ms) Figure 4 - Typical Junction Capacitance Cj (pf) R R Bi-directional V=0V Uni-directional V=0V 10 Tj=25ºC f=1.0mhz Vsig=50mVp-p V BR - Reverse Breakdown (V) Figure 5 - Steady State Power Dissipation Derating Curve P M(AV), Steady State Power Dissipation (W) T A - Ambient Temperature (ºC) Figure 6 - Non-Repetitive Forward Surge Uni-Directional Only I FSM - Peak Forward Surge (A) Number of Cyles at 60 Hz 78 TVS Diodes

81 PA4SMAJ Series Electrical Characteristics TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) PA4SMAJ6.8A PA4SMAJ6.8CA 6V8A 6V8C PA4SMAJ7.5A PA4SMAJ7.5CA 7V5A 7V5C PA4SMAJ8.2A PA4SMAJ8.2CA 8V2A 8V2C PA4SMAJ9.1A PA4SMAJ9.1CA 9V1A 9V1C PA4SMAJ10A PA4SMAJ10CA 10A 10C PA4SMAJ11A PA4SMAJ11CA 11A 11C PA4SMAJ12A PA4SMAJ12CA 12A 12C PA4SMAJ13A PA4SMAJ13CA 13A 13C PA4SMAJ15A PA4SMAJ15CA 15A 15C PA4SMAJ16A PA4SMAJ16CA 16A 16C PA4SMAJ18A PA4SMAJ18CA 18A 18C PA4SMAJ20A PA4SMAJ20CA 20A 20C PA4SMAJ22A PA4SMAJ22CA 22A 22C PA4SMAJ24A PA4SMAJ24CA 24A 24C PA4SMAJ27A PA4SMAJ27CA 27A 27C PA4SMAJ30A PA4SMAJ30CA 30A 30C PA4SMAJ33A PA4SMAJ33CA 33A 33C PA4SMAJ36A PA4SMAJ36CA 36A 36C PA4SMAJ39A PA4SMAJ39CA 39A 39C PA4SMAJ43A PA4SMAJ43CA 43A 43C PA4SMAJ47A PA4SMAJ47CA 47A 47C PA4SMAJ51A PA4SMAJ51CA 51A 51C PA4SMAJ56A PA4SMAJ56CA 56A 56C PA4SMAJ62A PA4SMAJ62CA 62A 62C PA4SMAJ68A PA4SMAJ68CA 68A 68C PA4SMAJ75A PA4SMAJ75CA 75A 75C PA4SMAJ82A PA4SMAJ82CA 82A 82C PA4SMAJ91A PA4SMAJ91CA 91A 91C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. TVS Diodes 79

82 PA4SMAJ Series Electrical Characteristics (continued) TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) PA4SMAJ100A PA4SMAJ100CA 100A 100C PA4SMAJ110A PA4SMAJ110CA 110A 110C PA4SMAJ120A PA4SMAJ120CA 120A 120C PA4SMAJ130A PA4SMAJ130CA 130A 130C PA4SMAJ150A PA4SMAJ150CA 150A 150C PA4SMAJ160A PA4SMAJ160CA 160A 160C PA4SMAJ170A PA4SMAJ170CA 170A 170C PA4SMAJ180A PA4SMAJ180CA 180A 180C PA4SMAJ200A PA4SMAJ200CA 200A 200C PA4SMAJ220A PA4SMAJ220CA 220A 220C PA4SMAJ250A PA4SMAJ250CA 250A 250C PA4SMAJ300A PA4SMAJ300CA 300A 300C PA4SMAJ350A PA4SMAJ350CA 350A 350C PA4SMAJ400A PA4SMAJ400CA 400A 400C PA4SMAJ440A PA4SMAJ440CA 440A 440C PA4SMAJ480A PA4SMAJ480CA 480A 480C PA4SMAJ510A PA4SMAJ510CA 510A 510C PA4SMAJ530A PA4SMAJ530CA 530A 530C PA4SMAJ540A PA4SMAJ540CA 540A 540C PA4SMAJ550A PA4SMAJ550CA 550A 550C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. 80 TVS Diodes

83 PA6SMBJ Series PA6SMBJ Series Features RoHS Compliance Standard For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction SMBJ/DO-214AA Low inductance Excellent clamping capability Repetition Rate (duty cycle): 0.01% Fast response time: typically less than 1.0 ps from 0 Volts to VBR for unidirectional types Typical IR less than 1µA above 10V High Temperature soldering: 260 C/10 seconds at terminals UL497B Recognized, File #E Tape and Reel to EIA Standard RS A (Reel Quantity = 3000 pieces) AEC-Q101 Qualified (9.1A & 9.1CA 550A & 550CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Ratings at 25ºC ambient temperature unless otherwise specified. Rating Symbol Value Units Peak pulse power dissipation on 10/1000µs waveform. (Note1 & 2, Fig. 1) PPPM Minimum 600 Watts Peak Pulse on 10/1000µs waveform. (Note 1, Fig. 3) IPPM See Table Amps Steady State Power Dissipation at TL = 75ºC. Lead lengths.375 in. (9.5mm). (Note 2, Fig. 5) PM(AV) 5.0 Watts Peak Forward Surge, 8.3ms Single Half Sine-Wave Superimposed on Load (JEDEC Method). (Note 3, Fig. 6) IFSM 100 Amps Operating junction and Storage Temperature Range. TJ, TSTG -65 to +150 ºC Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA= 25ºC per Fig Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal ms single half sine-wave or equivalent square wave. Duty Cycle = 4 pulses per minute maximum. Mechanical Characteristics Case: JEDEC DO214AA. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bi-directional Standard Packaging: 12mm tape (EIA STD RS-481) Weight: ounce, grams Devices for Bipolar Application For bi-directional use CA suffix for types PA6SMBJ 6.8CA thru types PA6SMBJ 550 CA, electrical characteristics apply in both directions. TVS Diodes 81

84 Mechanical Dimensions Cathode Band t D1 D s L d T Item Millimeters Inches Min. Max. Min. Max. L D D T T d s t T1 Ratings and Characteristics Curves (TA = 25ºC unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform P PPM -Peak Pulse Power (kw) x0.2" (5.0x5.0mm) Copper Pad Area t d -Pulse Width (sec.) Peak Pulse Power (P PP ) or (I PP ) Derating in Percentage % T A - Ambient Temperature (ºC) I PPM - Peak Pulse, % I RSM td tr=10µsec Peak Value IPPM Half Value IPPM IPPM ( 2 ) TJ=25 C Pulse Width(td) is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec. Waveform as defined by R.E.A t-time (ms) Cj (pf) Figure 4 - Typical Junction Capacitance Bi-directional V=0V Uni-directional V=0V 10 Tj=25C f=1.0mhz Vsig=50mVp-p V BR - Reverse Breakdown (V) Figure 5 - Steady State Power Dissipation Derating Curve P M(AV), Steady State Power Dissipation (W) T A - Ambient Temperature (ºC) Figure 6 - Non-Repetitive Forward Surge Uni-Directional Only 82 TVS Diodes I FSM - Peak Forward Surge (A) Number of Cycles at 60 Hz 100

85 PA6SMBJ Series Electrical Characteristics TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) PA6SMBJ6.8A PA6SMBJ6.8CA 6V8A 6V8C PA6SMBJ7.5A PA6SMBJ7.5CA 7V5A 7V5C PA6SMBJ8.2A PA6SMBJ8.2CA 8V2A 8V2C PA6SMBJ9.1A PA6SMBJ9.1CA 9V1A 9V1C PA6SMBJ10A PA6SMBJ10CA 10A 10C PA6SMBJ11A PA6SMBJ11CA 11A 11C PA6SMBJ12A PA6SMBJ12CA 12A 12C PA6SMBJ13A PA6SMBJ13CA 13A 13C PA6SMBJ15A PA6SMBJ15CA 15A 15C PA6SMBJ16A PA6SMBJ16CA 16A 16C PA6SMBJ18A PA6SMBJ18CA 18A 18C PA6SMBJ20A PA6SMBJ20CA 20A 20C PA6SMBJ22A PA6SMBJ22CA 22A 22C PA6SMBJ24A PA6SMBJ24CA 24A 24C PA6SMBJ27A PA6SMBJ27CA 27A 27C PA6SMBJ30A PA6SMBJ30CA 30A 30C PA6SMBJ33A PA6SMBJ33CA 33A 33C PA6SMBJ36A PA6SMBJ36CA 36A 36C PA6SMBJ39A PA6SMBJ39CA 39A 39C PA6SMBJ43A PA6SMBJ43CA 43A 43C PA6SMBJ47A PA6SMBJ47CA 47A 47C PA6SMBJ51A PA6SMBJ51CA 51A 51C PA6SMBJ56A PA6SMBJ56CA 56A 56C PA6SMBJ62A PA6SMBJ62CA 62A 62C PA6SMBJ68A PA6SMBJ68CA 68A 68C PA6SMBJ75A PA6SMBJ75CA 75A 75C PA6SMBJ82A PA6SMBJ82CA 82A 82C PA6SMBJ91A PA6SMBJ91CA 91A 91C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. TVS Diodes 83

86 PA6SMBJ Series Electrical Characteristics (continued) TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) PA6SMBJ100A PA6SMBJ100CA 100A 100C PA6SMBJ110A PA6SMBJ110CA 110A 110C PA6SMBJ120A PA6SMBJ120CA 120A 120C PA6SMBJ130A PA6SMBJ130CA 130A 130C PA6SMBJ150A PA6SMBJ150CA 150A 150C PA6SMBJ160A PA6SMBJ160CA 160A 160C PA6SMBJ170A PA6SMBJ170CA 170A 170C PA6SMBJ180A PA6SMBJ180CA 180A 180C PA6SMBJ200A PA6SMBJ200CA 200A 200C PA6SMBJ220A PA6SMBJ220CA 220A 220C PA6SMBJ250A PA6SMBJ250CA 250A 250C PA6SMBJ300A PA6SMBJ300CA 300A 300C PA6SMBJ350A PA6SMBJ350CA 350A 350C PA6SMBJ400A PA6SMBJ400CA 400A 400C PA6SMBJ440A PA6SMBJ440CA 440A 440C PA6SMBJ480A PA6SMBJ480CA 480A 480C PA6SMBJ510A PA6SMBJ510CA 510A 510C PA6SMBJ530A PA6SMBJ530CA 530A 530C PA6SMBJ540A PA6SMBJ540CA 540A 540C PA6SMBJ550A PA6SMBJ550CA 550A 550C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. 84 TVS Diodes

87 1.5ASMCJ Series 1.5ASMCJ Series Features RoHS Compliance Standard For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction SMCJ/DO-214AB Low inductance Excellent clamping capability Repetition Rate (duty cycle): 0.01% Fast response time: typically less than 1.0 ps from 0 Volts to BV min. Typical IR less than 1µA above 10V High Temperature soldering: 260 C/10 seconds at terminals UL497B Recognized, File #E Tape and Reel to EIA Standard RS A (Reel Quantity = 3000 pieces) Gull-wing lead frame may be available upon request AEC-Q101 Qualified (9.1A & 9.1CA 550A & 550CA) types. (When ordering ADD suffix Z to end of part number.) Absolute Ratings Ratings at 25ºC ambient temperature unless otherwise specified. Rating Symbol Value Units Peak pulse power dissipation on 10/1000µs waveform. (Note1 & 2, Fig. 1) PPPM Minimum 1500 Watts Peak Pulse on 10/1000µs waveform. (Note 1, Fig. 3) IPPM See Table Amps Steady State Power Dissipation at TL = 75ºC. Lead lenghths.375 in. (9.5mm). (Note 2, Fig. 5) PM(AV) 6.5 Watts Peak Forward Surge, 8.3ms Single Half Sine-Wave Superimposed on Load (JEDEC Method). (Note 3, Fig. 6) IFSM 200 Amps Operating junction and Storage Temperature Range. TJ, TSTG -65 to +150 ºC Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA= 25ºC per Fig Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal ms single half sine-wave or equivalent square wave. Duty Cycle = 4 pulses per minute maximum. Mechanical Characteristics Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bi-directional Standard Packaging: 16mm tape (EIA STD RS-481) Weight: ounce, 0.21 grams Devices for Bipolar Application For bi-directional use CA suffix for types 1.5ASMCJ 6.8CA thru types 1.5ASMCJ 550CA, electrical characteristics apply in both directions. TVS Diodes 85

88 Mechanical Dimensions Cathode Band t D1 D s L d T Item Millimeters Inches Min. Max. Min. Max. L D D T T d s t T1 Ratings and Characteristics Curves (TA = 25ºC unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve P PPM -Peak Pulse Power (kw) x0.31" (8.0x8.0mm) Copper Pad Area t d -Pulse Width (sec.) Figure 2 - Pulse Derating Curve Peak Pulse Power (P PP ) or (I PP ) Derating in Percentage % T A - Ambient Temperature (ºC) Figure 3 - Pulse Waveform I PPM - Peak Pulse, % I RSM td tr=10µsec Peak Value IPPM Half Value IPPM IPPM ( 2 ) TJ=25 C Pulse Width(td) is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec. Waveform as defined by R.E.A t-time (ms) Figure 4 - Typical Junction Capacitance Cj (pf) R Bi-directional V=0V Uni-directional V=0V R 10 Tj=25C f=1.0mhz Vsig=50mVp-p V BR - Reverse Breakdown (V) Figure 5 - Steady State Power Dissipation Derating Curve P M(AV), Steady Sate Power Dissipation (W) T A - Ambient Temperature (ºC) Figure 6 - Non-Repetitive Forward Surge Uni-Directional Only I FSM - Peak Forward Surge (A) Number of Cycles at 60 Hz TVS Diodes

89 1.5ASMCJ Series Electrical Characteristics TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) 1.5ASMCJ6.8A 1.5ASMCJ6.8CA 6V8A 6V8C ASMCJ7.5A 1.5ASMCJ7.5CA 7V5A 7V5C ASMCJ8.2A 1.5ASMCJ8.2CA 8V2A 8V2C ASMCJ9.1A 1.5ASMCJ9.1CA 9V1A 9V1C ASMCJ10A 1.5ASMCJ10CA 10A 10C ASMCJ11A 1.5ASMCJ11CA 11A 11C ASMCJ12A 1.5ASMCJ12CA 12A 12C ASMCJ13A 1.5ASMCJ13CA 13A 13C ASMCJ15A 1.5ASMCJ15CA 15A 15C ASMCJ16A 1.5ASMCJ16CA 16A 16C ASMCJ18A 1.5ASMCJ18CA 18A 18C ASMCJ20A 1.5ASMCJ20CA 20A 20C ASMCJ22A 1.5ASMCJ22CA 22A 22C ASMCJ24A 1.5ASMCJ24CA 24A 24C ASMCJ27A 1.5ASMCJ27CA 27A 27C ASMCJ30A 1.5ASMCJ30CA 30A 30C ASMCJ33A 1.5ASMCJ33CA 33A 33C ASMCJ36A 1.5ASMCJ36CA 36A 36C ASMCJ39A 1.5ASMCJ39CA 39A 39C ASMCJ43A 1.5ASMCJ43CA 43A 43C ASMCJ47A 1.5ASMCJ47CA 47A 47C ASMCJ51A 1.5ASMCJ51CA 51A 51C ASMCJ56A 1.5ASMCJ56CA 56A 56C ASMCJ62A 1.5ASMCJ62CA 62A 62C ASMCJ68A 1.5ASMCJ68CA 68A 68C ASMCJ75A 1.5ASMCJ75CA 75A 75C ASMCJ82A 1.5ASMCJ82CA 82A 82C ASMCJ91A 1.5ASMCJ91CA 91A 91C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. TVS Diodes 87

90 1.5ASMCJ Series Electrical Characteristics (continued) TVS Diodes Part Number Device Marking Code Reverse Standoff Uni Polar Bi Polar UNI BI VRWM (V) VBR MIN. (V) VBR MAX. (V) Test Peak Pulse Reverse IT (ma) VC (V) IPP (A) IR (μa) 1.5ASMCJ100A 1.5ASMCJ100CA 100A 100C ASMCJ110A 1.5ASMCJ110CA 110A 110C ASMCJ120A 1.5ASMCJ120CA 120A 120C ASMCJ130A 1.5ASMCJ130CA 130A 130C ASMCJ150A 1.5ASMCJ150CA 150A 150C ASMCJ160A 1.5ASMCJ160CA 160A 160C ASMCJ170A 1.5ASMCJ170CA 170A 170C ASMCJ180A 1.5ASMCJ180CA 180A 180C ASMCJ200A 1.5ASMCJ200CA 200A 200C ASMCJ220A 1.5ASMCJ220CA 220A 220C ASMCJ250A 1.5ASMCJ250CA 250A 250C ASMCJ300A 1.5ASMCJ300CA 300A 300C ASMCJ350A 1.5ASMCJ350CA 350A 350C ASMCJ400A 1.5ASMCJ400CA 400A 400C ASMCJ440A 1.5ASMCJ440CA 440A 440C ASMCJ480A 1.5ASMCJ480CA 480A 480C ASMCJ510A 1.5ASMCJ510CA 510A 510C ASMCJ530A 1.5ASMCJ530CA 530A 530C ASMCJ540A 1.5ASMCJ540CA 540A 540C ASMCJ550A 1.5ASMCJ550CA 550A 550C Note: For bi-directional type having VRWM of 10 volts and less, the IR limit is double. 88 TVS Diodes

91 Circuit Examples Data Line Protection R L1 L1 VZ (10mm disc size) VZ (10mm disc size) TVS (LCE) TVS (LCE) L2 L2 VZ (10mm disc size) R TVS (LCE) G G AC Line Protection H VZ20D241KBS L 1.5KE250C 1.5KE250C H VZ20D241KBS WXE-104K L WYE-222M N N VZ20D241KBS WYE-222M G 1.5KE250C G Telecom Circuit Protection R R Tip 1.5KE250C 1.5KE250C Tip WPGT-3R230 VZ20D241KBS VZ20D241KBS Ring R Ring VZ20D241KBS 1.5KE250C G G TVS Diodes 89

92 Applications Transient Suppression Diodes or TVSD is a semiconductor diode with a single P-N junction which may operate in either direction and employs its breakdown characteristics as part of its function. This device limits (clamp) transient voltages and diverts transient currents. TVSD in Bridge Rectifier Protection TVSD in SMPS Output Protection TVSD in Triac Protection TVSD in AC Line Protection GDT & TVSD In Telephone Line Protection TVSD in Servo Motor Protection TVSD in Automtoive Equipment Protection TVSD in Low Capacitance Applications All application notes/circuits are shown as examples only. It is the responsibility of the purchaser to insure that the application meets purchaser s specifications. No representation or warranty, whether express or implied, is given and no liability is assumed by WPI with respect to the use of such examples. WPI Reserves Copyright DISLAIMER: The names of the products and the specifications in this catalog are subject to change without notice for the sake of improvement. World Products, LLC also reserves the right to discontinue any of these products. The products in this catalog are intended for use in ordinary electronic products. If any of these products are to be used in special applications requiring extremely high reliability, where product defects might pose a safety risk, please consult World Products, LLC Though World Products, LLC has taken all possible precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fire, or similar accident. If you have any questions regarding the use of the products in question, please consult World Products, LLC Please be advised that World Products, LLC accepts no responsibility for any infraction by users of World Products, LLC products on third party patents or industrial copyrights. 90 TVS Diodes