cosmo ELECTRONICS CORPORATION

Transcription

1 Features DATE:5/3/211 NO.6P3 KMOC323 SHEET 1 OF 6 Optoisolators TRIAC Driver Output (V Volts Peak) 1. Compact dual-in-line package. 2. V peak blocking voltage. 3. Isolation voltage between input and output (Viso:5Vrms). For 115/2 Vac(rms) Application: 1. Solenoid/Valve Controls. 2. Lighting Controls. 3. Static Power Switches.. AC Motor Drives. 5. Temperature Controls. 6. E.M. Contactors. 7. AC Motor Starters. 8. Solid State Relays. 9. Programmable controllers.

2 DATE:5/3/211 NO.6P3 KMOC323 SHEET 2 OF 6 1. OUTSIDE DIMENSION:UNIT (mm) 323 XXX Date Code Anode o 13. o 5.8 TOLERANCE : ±.2mm 2. SCHEMATIC:TOP VIEW Anode 2. Cathode 3. NC. Main Terminal 6. Main Terminal

3 DATE:5/3/211 Absolute Maximum Ratings Input NO.6P3 KMOC323 SHEET 3 OF 6 Parameter Symbol Rating Unit Forward current IF 5 ma Peak forward current IFM 1 A Reverse voltage VR 6 V Power dissipation PD 7 mw Off-State Output Terminal voltage VDRM VPEAK Output On-State R.M.S. Current IT(RMS) ma Peak Repetitive Surge Current (PW=1ms.DC 1%) ITSM 1 A Power dissipation PD 3 mw Total power dissipation Ptot 33 mw Isolation voltage 1 minute Viso 5 Vrms Operating temperature Topr - to + Storage temperature Tstg -5 to +125 Soldering temperature 1 second Tsol 26 Electro-optical Characteristics Parameter Symbol Conditions Min. Typ. Max. Unit Forward voltage VF IF=1mA V Input Peak forward voltage VFM IFM=.5A V Reverse current IR VR=V ua Peak Blocking Current IDRM VDRM=V - - na Output ON-State Voltage VTM ITM=mA V Holding Current IH ma Tranfer characteristics Critical rate of rise of OFF-state voltage dv/dt VDRM=(1/ 2 )*Rated V/uS Isolation resistance Riso DC5V 5x Ohm Minimum trigger current IFT Main Terminal Voltage=3V ma Turn-on time Ton VD=6V,RL=Ohm,IF=2mA - - us

4 DATE:5/3/211 NO.6P3 KMOC323 SHEET OF 6 Fig.1 Forward Current vs. Fig.2 Diode Power Dissipation vs. Forward Current IF(mA) Diode Power Dissipation PD(mW) Fig.3 On-State R.M.S. Current vs. Fig. Total Power Dissipation vs. On-State R.M.S. Current (ma) Total Power Dissipation PC(mW) Fig.5 Peak Forward Current vs. Duty Ratio Fig.6 Forward Current vs. Forward Voltage Peak Forward Current IFM(mA) 1 Pulse width <=us Ta=25 C Duty Ratio 1 Forward Current IF(mA) Ta=75 C 5 C C C -25 C Forward Voltage V F (V) 3.

5 DATE:5/3/211 NO.6P3 KMOC323 SHEET 5 OF 6 Fig.7 On-State Characteristics Fig.8 Leakage with LED off vs. On-State Current (ma) Output Pulse Width 8us I F =3mA,f=6Hz,Ta=25 C Peak Blocking Current IDRM(nA) I F=,V DRM =Rated On-State Voltage (V) Fig.9 Trigger Current vs. IFT, Normalized Normalized To Ta=25 C

6 NOTICE DATE:5/3/211 NO.6P3 KMOC323 SHEET 6 OF 6 The information contained in this document is intended to be a general product description and is subject to change without notice. Please contact cosmo in order to obtain the latest device data sheets before using any cosmo device. cosmo does not assume any responsibility for use of any circuitry described. No circuit patent licenses are implied. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or by any means, or transferred to any third party without the prior written consent of cosmo Electronics Corporation. The devices listed in this document are designed for general applications only in electronic equipment. No devices shall be deployed which require higher level of reliability such as: - Medical and other life support equipments. - Space application. - Telecommunication equipment (trunk lines). - Nuclear power control equipment. Unless it received prior written approval from cosmo. cosmo takes no responsibility for damages arise form the improper usage of our device. Please contact cosmo for further information regarding the above notices.