Aluminum Capacitors Radial Miniature Semi-Professional MARKING
|
|
- Helena Dean
- 6 years ago
- Views:
Transcription
1 Aluminum Capacitors 047 RMS Fig.1 Component outline. QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes ( D L in mm) to Rated capacitance range, C R 100 to μf Tolerance on C R ±20% Rated voltage range, U R 16 to 63 V Category temperature range 40 to +105 C Endurance test at 105 C 1000 hours Useful life at 105 C 1500 hours Useful life at 40 C, 1.3 I R applied hours Shelf life at 0 V, 105 C 500 hours Based on sectional specification IEC /EN Climatic category IEC /105/56 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue vinyl sleeve Charge and discharge proof Long useful life: 1500 hours at 105 C Miniaturized, high CV-product per unit volume Lead (Pb)-free versions are RoHS compliant. APPLICATIONS EDB, telecommunication, industrial, automotive and audio-video Smoothing, filtering, buffering in SMPS, timing Portable and mobile equipment (small size, low mass). MARKING The capacitors are marked (where possible) with the following information: Rated capacitance value (in µf). Tolerance on rated capacitance, code letter in accordance with IEC (M for ±20%). Rated voltage (in V). Date code, in accordance with IEC Code indicating factory of origin. Name of manufacturer. Upper category temperature (105 C). Negative terminal identification. Series number (047). SELECTION CHART FOR C R, U R AND RELEVANT NOMINAL CASE SIZES (ØD x L in mm) C R U R (V) (ΜF) Pb-free Available RoHS* COMPLIANT * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: For technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov
2 047 RMS Aluminum Capacitors DIMENSIONS in millimeters, AND AVAILABLE FORMS Fig.2 Form CA: Long leads. Table 1 Fig.3 Form CB: Cut leads. DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE CASE SIZE CODE D L d D max L max F MASS (g) Fig.4 Form TFA: Taped in box (ammopack). PACKAGING QUANTITIES FORM CA FORM CB FORM TFA ± ± ± ± ± ± ± ± ± For technical questions contact: aluminumcaps1@vishay.com Document Number: Revision: 16-Nov-05
3 Aluminum Capacitors 047 RMS ELECTRICAL DATA SYMBOL DESCRIPTION C R rated capacitance at 100 Hz, tolerance ±20% I R rated RMS ripple current at 100 Hz, 105 C I L1 max. leakage current after 1 minute at U R Tan δ max. dissipation factor at 100 Hz Z max. impedance at 10 khz or 100 khz Note 1. Unless otherwise specified, all electrical values in Table 2 apply at T amb = 20 C, P = 86 to 106 kpa, RH = 45 to 75%. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING EXAMPLE* Electrolytic capacitor 047 series 1000 μf/35 V; ±20 Nominal case size: mm; Form TFA Catalog number: * To ensure delivery of lead (Pb)-free parts during the transition period, please contact your Vishay sales agent. NOMINAL I C R CATALOG NUMBER U R I R CASE SIZE L1 Z 100 Hz Tan Δ 100 Hz 1min 100 khz BULK PACKAGING TAPED (V) D L 105 C 100 Hz (ΜF) (ΜA) (Ω) (mm) (ma) FORM CA FORM CB FORM TFA Document Number: For technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov
4 047 RMS Aluminum Capacitors ADDITIONAL ELECTRICAL DATA DESCRIPTION CONDITIONS VALUE Voltage Surge voltage U s 1.15 U R Reverse voltage U rev 1V Current Leakage current after 1 minute at U R I L C R U R +3μA after 5 minutes at U R I L C R U R +3μA Inductance Equivalent series inductance (ESL) case D = 10 mm typ. 16 nh case D 12.5 mm Resistance RIPPLE CURRENT AND USEFUL LIFE typ. 18 nh Equivalent series resistance (ESR) calculated from tan δ max and C R (see Table 2) ESR = tan δ / 2πfC R I A = actual ripple current at 100 Hz. I R = rated ripple current at 100 Hz, 105 C. (1) Useful life at 105 C and I R applied: 1500 hours. Fig.5 Multiplier of useful life as a function of ambient temperature and ripple current load. Table 3 I A I R lifetime multiplier (1) T amb ( C) MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) I R MULTIPLIER U R =16and25V U R =35and40V U R =50and63V CCC206 For technical questions contact: aluminumcaps1@vishay.com Document Number: Revision: 16-Nov-05
5 Aluminum Capacitors 047 RMS Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE Endurance IEC / EN subclause 4.13 Useful life CECC subclause Shelf life (storage at high temperature) IEC / EN130300, subclause 4.17 PROCEDURE (quick reference) T amb =105 C; U R applied; 1000 hours T amb =105 C; U R and I R applied; 1500 hours T amb =105 C; no voltage applied; 500 hours after test: U R to be applied for 30 minutes, 24 to 48 hours before measurement REQUIREMENTS ΔC/C: ±15% tan δ 1.3 spec. limit Z 2 spec. limit I L5 spec. limit ΔC/C: ±45% tan δ 3 spec. limit Z 3 spec. limit I L5 spec. limit no short or open circuit total failure percentage: 1% ΔC/C: ±15% tan δ 1.3 spec. limit Z 2 spec. limit I L5 2 spec. limit Document Number: For technical questions contact: aluminumcaps1@vishay.com Revision: 16-Nov
6 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: Revision: 18-Jul-08 1
Aluminum Capacitors Radial Miniature Long Life
048 RML Aluminum Capacitors FEATURES Fig.1 Component outline. 151 152 RLH RMH Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case with pressure relief,
More informationAluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability
Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance, High Vibration Capability 40 RTM lower Z longer life 50 RMI 25 C 46 RTI high vibration QUICK REFERENCE DATA DESCRIPTION VALUE Nominal
More informationAluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current
Aluminum Electrolytic Capacitors Axial High Temperature, High Ripple Current smaller 9 AHT-DIN 8 AHT lower dimensions higher ripple Fig. 25 C 38 AML QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case
More informationAluminum Electrolytic Capacitors Power Ultra Miniature Snap-In
Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In 056/057 PSM-SI miniaturized 156 PUM-SI Fig. 1 high voltage 157 PUM-SI QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in
More informationAluminum Electrolytic Capacitors Radial Low Profile, 5 mm
Aluminum Electrolytic Capacitors Radial Low Profile, 5 mm 038 RSU 097 RLP 7 higher CV-values 5 mm ig. 1 longer life SMD 153 CRV QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm)
More informationAluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In
Aluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In FEATURES Useful life: 2000 h at +105 C, > 5000 h at +85 C Voltage range from 16 V to 100 V Polarized aluminum electrolytic
More informationAluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar
Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar FEATURES Long useful life: 6000 h at +105 C Specified for 500 V, 50 C operation High ripple current capability High reliability
More informationSchottky Diode, 2 x 0.1 A
Vishay High Power Products Schottky Diode, 2 x A FEATURES Small foot print, surface mountable Very low forward voltage drop Extremely fast switching speed for high frequency operation Pb-free Available
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
More informationSurge Metal Film Leaded Resistor
Surge Metal Film Leaded Resistor FEATURES Metal film technology High pulse load (up to 10 kv) capability Replacement for carbon-composition resistors Compatible with lead (Pb)-free and lead containing
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationSingle Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A VS- Series PRODUCT SUMMARY I O V RRM Package Circuit 1.9 A 1 V to 1 V Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard 2.54
More information3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer 43 FEATURES W at 70 C Wide ohmic value range (10 Ω to 5 MΩ) Panel mount available Multi-finger wiper for better C.R.V. Tests according to CECC 41000 or
More informationHyperfast Rectifier, 8 A FRED Pt TM
Base cathode 2 FEATURES Hyperfast recovery time Low forward voltage drop Low leakage current 175 C operating junction temperature Lead (Pb)-free ( PbF suffix) Designed and qualified for industrial level
More informationCeramic Disc Capacitors Class 2, 500 V DC, 1 kv DC, General Purpose
Ceramic Disc Capacitors Class 2, 500 V DC, 1 kv DC, General Purpose FEATURES High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS Directive 2011/65/EU APPLICATIONS Bypassing
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
More informationSilicon PIN Photodiode, RoHS Compliant
BP4, BP4S DESCRIPTION 948386_ BP4 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view plastic package with daylight blocking filter. Filter bandwidth is matched
More informationSingle Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
More informationAluminum Capacitors Little-Lytic Electrolytics
QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature - 40 C to + 105 C Tolerance on C R G = + 75 %, - 10 % and F = + 50 %, - 10 % Ripple current Life validation test 2000 hours at + 85 C DC leakage
More informationWirewound/Metal Film Resistors, Commercial Power, Radial Lead
RMW, RMF End-of-Life Product FEATURES High power dissipation in small volume Very stable mounting Non-flammable High pulse load handling capabilities High heat and moisture resistance Various terminal
More informationThin Film Microwave Resistors
FEATURES Small size, down to 2 by 16 mils Edged trimmed block resistors Pure alumina substrate (99.5 %) RoHS COMPLIANT Various terminations: Pre-tinned over nickel barrier (wraparound or flip chip) for
More informationMultilayer Ceramic Dipped Axial Capacitors 50 V DC and 100 V DC
DIMENSIONS 5 mm or 6.35 mm wide carrier tape Ø 0.5 Lb Ø D 52.4 ± 1.5 CAPACITOR DIMENSIONS AND WEIGHT in millimeters (inches) WEIGHT SIZE Lb max. Ø D max. (g) 15 3.8 (0.150) 2.5 (0.100) 0.14 20 5.0 (0.200)
More informationFusible Power Metal Film Leaded Resistors
Fusible Power Metal Film Leaded NFR1, NFR2, NFR3 FEATURES Metal film technology High power (upto 3 W) in small package Small standard sizes (27/414/617) High stability, reliability and uniformity characteristics
More informationMetal Film, Cylindrical Resistors
SMM4 Metal Film, Cylindrical Resistors FEATURES Stable metal film on high quality ceramic Low TC and tight tolerances Excellent stability in different environmental conditions Pure tin termination on nickel
More information4-Channel LCR - EMI-Filter with ESD-Protection VEMI45LA-HNH VEMI45LA-HNH-G Molding compound flammability rating
-Channel LCR - EMI-Filter with ESD-Protection VEMILA-HNH Features Ultra compact LLP7-9L package Low package profile of. mm -channel LC EMI-filter Low leakage current Line inductance L S = nh Low line resistance
More informationSilicon PIN Photodiode, RoHS Compliant
DESCRIPTION 640- is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched with 870 nm to 950 nm IR emitters.
More informationSingle Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
More informationAluminum Capacitors +125 C, Miniature, Radial Lead
Aluminum Capacitors +125 C, Miniature, Radial Lead FEATURES +125 C performance Suitable for tantalum foil replacement applications Available Low DC leakage currents Very stable, long life Case sizes through
More informationHigh Ohmic (up to 33 MΩ)/ High Voltage (up to 3.5 kv) Resistors
High Ohmic (up to 33 MΩ)/ FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
More informationReflective Optical Sensor with Transistor Output
TCRT, TCRT Reflective Optical Sensor with 2836 TCRT A C E C TCRT 955_ FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 7 x 4 x 2.5 Peak operating distance: mm
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationMolded Metal Film High Stability (< 0.25 % after 1000 h) High Temperature (up to 175 C) Precision Resistors
Vishay Sfernice Molded Metal Film High Stability (< 0.25 % after 1000 h) FEATURES 0.1 W to 2 W at 125 C EN140100 CECC 40 101044 High climatic performance 65 C/+ 175 C/56 days High long term stability drift
More informationSilicon PIN Photodiode, RoHS Compliant
BPW41N DESCRIPTION 94 8480 BPW41N is a PIN photodiode with high speed and high radiant sensitivity in a black, side view plastic package with daylight blocking filter. Filter bandwidth is matched with
More informationHyperfast Rectifier, 15 A FRED Pt TM
5ETX6PbF Base cathode 2 5ETX6FPPbF FEATURES Benchmark ultralow forward voltage drop Hyperfast recovery time Low leakage current 75 C operating junction temperature Fully isolated package (V INS = 25 V
More informationLead (Pb)-free Thick Film, Rectangular, Pulse Proof Chip Resistors
D../CRCW...-IF e3 Lead (Pb)-free Thick Film, Rectangular, STANDARD ELECTRICAL SPECIFICATIONS SIZE LIMITING POWER RATING ELEMENT MODEL P INCH METRIC 70 C W VOLTAGE MAX. V FEATURES High pulse performance
More informationHigh Speed Infrared Emitting Diode, 850 nm, Surface Emitter Technology
High Speed Infrared Emitting Diode, 85 nm, Surface Emitter Technology VSLY585 Vishay Semiconductors DESCRIPTION 224 VSLY585 is an infrared, 85 nm emitting diode based on GaAlAs surface emitter chip technology
More informationPower MOSFET FEATURES. IRLZ24PbF SiHLZ24-E3 IRLZ24 SiHLZ24 T C = 25 C
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 5.0 V 0.10 Q g (Max.) (nc) 18 Q gs (nc) 4.5 Q gd (nc) 12 Configuration Single TO-220 G D S ORDERING INFORMATION Package Lead (Pb)-free SnPb G D S
More informationSingle Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
60EPU04PbF Cathode to base PRODUCT SUMMARY t rr (AV) 2 1 3 Cathode Anode TO247AC modified 60APU04PbF Cathode to base 2 1 3 Anode Anode TO-247AC 50 ns 60 A 400 V FEATURES Ultrafast recovery 175 C operating
More informationFEATURES ± [0.64 ± 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable
SuperTan Wet Tantalum Capacitors s capacitor represents a major breakthrough in wet tantalum technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates
More informationPart Ordering code Type Marking Remarks BAT41 BAT41-TR or BAT41-TAP BAT41 Tape and Reel/Ammopack
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage and high breakdown voltage. This device e2 is protected by a PN junction guard ring against
More informationHigh Performance Schottky Generation 5.0, 10 A
UT, WTFN UT Base cathode 4 3 Anode 2 Anode Cathode I-PAK (TO-25AA) Schottky Generation 5.0, A WTFN Base cathode 4 2 Cathode 3 Anode Anode D-PAK (TO-252AA) FEATURES 75 C high performance Schottky diode
More informationHigh Current Density Surface Mount Dual Common-Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp TM Series TO-77A (SMPC) Cathode Anode Anode PRIMARY CHARACTERISTICS I F(AV) x 4.0 A V RRM 50 V, 60 V I FSM 0 A E AS 0 mj V
More informationInfrared Emitting Diode, RoHS Compliant, 950 nm, GaAs
TSUS52, TSUS521, TSUS522 Infrared Emitting Diode, RoHS Compliant, 95 nm, GaAs DESCRIPTION 94 839 TSUS52 is an infrared, 95 nm emitting diode in GaAs technology molded in a blue-gray tinted plastic package.
More informationHigh Speed Infrared Emitting Diode, RoHS Compliant, 870 nm, GaAlAs Double Hetero
TSFF52 High Speed Infrared Emitting Diode, RoHS Compliant, 87 nm, GaAlAs Double Hetero DESCRIPTION 94 839 TSFF52 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationHEXFRED Ultrafast Soft Recovery Diode, 15 A
Vishay High Power Products TO-247AC modified HEXFRED Base common cathode 2 1 3 Cathode Anode FEATURES Ultrafast recovery Ultrasoft recovery Very low I RRM Very low Q rr Specified at operating conditions
More informationHyperfast Rectifier, 8 A FRED Pt
New Product 8S2TH6I-M 2L TO-22 PRODUCT SUMMARY t rr (AV) 2 ns 8 A 6 V FEATURES Hyperfast recovery time Low forward voltage drop Low leakage current 75 C operating junction temperature Compliant to RoHS
More informationHigh Intensity Red Low Current Seven Segment Display
High Intensity Red Low Current 19237 DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in color red. The supreme
More informationHyperfast Rectifier, 15 A FRED Pt TM
15ETH6S Base cathode 2 15ETH6-1 2 FEATURES Hyperfast recovery time Low forward voltage drop Low leakage current 175 C operating junction temperature Single die center tap module Designed and qualified
More informationSchottky Barrier Rectifiers
Schottky Barrier Rectifiers FEATURES Guardring for overvoltage protection Very small conduction losses Extremely fast switching Low forward voltage drop DO-204AL (DO-4) High frequency operation Solder
More informationHigh Speed Infrared Emitting Diode, RoHS Compliant, 830 nm, GaAlAs Double Hetero
TSHG84 Compliant, 83 nm, GaAlAs Double Hetero DESCRIPTION 94 8389 TSHG84 is an infrared, 83 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded in a
More information1 Form A Solid State Relay
LH5AAB, LH5AABTR, LH5AT Form A Solid State Relay FEATURES S S DC 5 S' S' Isolation test voltage 53 V RMS Current limit protection built in High reliability monolithic output die Low power consumption Clean
More informationHigh Speed Infrared Emitting Diode, 890 nm, GaAlAs Double Hetero
TSHF62 Vishay Semiconductors High Speed Infrared Emitting Diode, 89 nm, GaAlAs Double Hetero DESCRIPTION 94 8389 TSHF62 is an infrared, 89 nm emitting diode in GaAlAs double hetero (DH) technology with
More information2-Channel EMI-Filter with ESD-Protection
2-Channel EMI-Filter with 9499 6 5 4 2 3 MARKING (example only) XX YY Dot = pin marking YY = type code (see table below) XX = date code 9957 2 FEATURES Ultra compact LLP75-6A package 2-channel EMI-filter
More informationSurface Mounted Power Resistor Thick Film Technology
D2TO35 DIMENSIONS in millimeters 1.6 10.1 Surface Mounted Power Resistor 8.8 1.25 4.5 FEATURES 35 W at 25 C case temperature Surface mounted resistor - TO-263 (D 2 PAK) style package Wide resistance range
More informationExcellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Vishay Semiconductor/Diodes Division For any questions, you can email
More informationHigh Speed Infrared Emitting Diode, RoHS Compliant, 850 nm, GaAlAs Double Hetero
TSHG62 Vishay Semiconductors High Speed Infrared Emitting Diode, RoHS Compliant, 85 nm, GaAlAs Double Hetero DESCRIPTION 94 8389 TSHG62 is an infrared, 85 nm emitting diode in GaAlAs double hetero (DH)
More informationOptocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling
More informationAC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y2, 300 V AC / 250 V AC
AC Line Rated Ceramic Disc Capacitors Class X1, V AC / Class Y, V AC / V AC FEATURES Complying with IEC 638-1 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer
More informationSuperTan Wet Tantalum Capacitors with Hermetic Seal
SuperTan Wet Tantalum Capacitors with Hermetic Seal represents a major breakthrough in wet tantalum capacitor technology. Its unique cathode system provides the highest capacitance per unit volume. The
More informationAluminum Capacitors Little-Lytic Electrolytics
Aluminum Capacitors Little-Lytic Electrolytics QUICK REFERENCE DATA DESCRIPTION VALUE Operating temperature -40 C to +105 C Tolerance on C R G = +75 %, -10 % and F = +50 %, -10 % Ripple current Life validation
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt TM
Vishay High Power Products 60EPU04 Ultrafast Soft Recovery Diode, 60APU04 FEATURES Ultrafast recovery Cathode to base PRODUCT SUMMARY t rr (typical) (AV) 2 1 3 Cathode Anode TO-247AC modified Cathode to
More informationThree Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationSchottky Rectifier, 1.0 A
SMB Cathode Anode FEATURES 125 C operation (V R < 5 V) Optimized for OR-ing applications Ultralow forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
More informationSchottky Rectifier, 8 A
Schottky Rectifier, 8 A 8TQ8SPbF, 8TQSPbF D 2 PAK PRODUCT SUMMARY I F(AV) V R Base cathode 2 3 N/C Anode 8 A 8 V/ V FEATURES 75 C operation Low forward voltage drop High frequency operation High purity,
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance Stability R/R 1 % for 0 h at 70 C Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free and lead
More informationSchottky Rectifier, 6 A
Schottky Rectifier, 6 A 6TQ...PbF Series TO-220AC PRODUCT SUMMARY I F(AV) V R Base cathode 2 3 Cathode Anode 6 A 35 to 45 V FEATURES 75 C operation High frequency operation Low forward voltage drop High
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
More informationAC Line Rated Disc Capacitors Class X1, 400 V AC /Class Y2, 300 V AC
LV Series AC Line Rated Disc Capacitors Class X1, V AC /Class Y2, V AC FEATURES Complying with IEC 6384-14 3 rd edition High reliability Complete range of capacitance values Radial leads Singlelayer AC
More informationN-Channel 60-V (D-S), 175 C MOSFET
N-Channel -V (D-S), 75 C MOSFET Si4559EY V DS (V) r DS(on) ( ) (A) N-Channel P-Channel.55 @ V GS = V 4.5.75 @ V GS = 4.5 V 3.9. @ V GS = V 3..5 @ V GS = 4.5 V.8 D D S SO-8 S 8 D G 7 D S 3 D G 4 5 D G G
More informationHigh Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
TSAL61 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL61 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic
More informationSchottky Rectifier, 10 A
Schottky Rectifier, 0 A 0TQ035SPbF, 0TQ045SPbF D 2 PAK PRODUCT SUMMARY I F(AV) V R Base cathode 2 3 N/C Anode 0 A 35 V/45 V FEATURES 75 C operation Low forward voltage drop High frequency operation High
More informationDual P-Channel 2.5-V (G-S) MOSFET
Dual P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).6 at V GS = -.5 V -.7 -. at V GS = -.5 V - 3.7 FEATURES Halogen-free According to IEC 69-- Definition Compliant to RoHS Directive
More informationInfrared Emitting Diode, 950 nm, GaAs
94 8553 DESCRIPTION is an infrared, 95 nm emitting diode in technology, molded in a PLCC-2 package for surface mounting (SMD). FEATURES Package type: surface mount Package form: PLCC-2 Dimensions (L x
More informationInfrared Emitting Diode, RoHS Compliant, 950 nm, GaAs
DESCRIPTION 94 8638 is an infrared, 95 nm emitting diode in GaAs technology molded in a miniature, clear plastic package without lens. FEATURES Package type: leaded Package form: T-¾ Dimensions (in mm):
More informationSilicon Phototransistor in 0805 Package
Silicon Phototransistor in 85 Package TEMT7X1 Vishay Semiconductors 243-1 DESCRIPTION TEMT7X1 is a silicon NPN epitaxial planar phototransistor with daylight blocking filter in a miniature, black 85 package
More informationHigh Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1
More informationThin Film Mini-MELF Resistors
FEATURES Advanced thin film technology AEC-Q2 qualified Low TCR and tight tolerances Excellent stability in different environmental conditions Pure tin termination on nickel barrier, plated on press fit
More informationS07B, S07D, S07G, S07J, S07M
Small Signal Switching Diode, High Voltage S07B, S07D, S07G, S07J, S07M Features For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering:
More informationDual Photovoltaic MOSFET Driver Solid-State Relay
Dual Photovoltaic MOSFET Driver Solid-State Relay i179034_2 SMD DIP DESCRIPTION - Control 1 + Control 1 - Control 2 + Control 2 8 7 6 5 1 2 3 4 + Control 1 - Control 1 + Control 2 - Control 2 The VO1263AB
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP, 01, 03, 05 Schematics
MDP 01,, 05 Thick Film Resistor Networks, Dual-In-Line, STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ NO. OF PINS MDP 14 MDP 16 SCHEMATIC 01 05 01 RESISTOR POWER RATING Max. AT 70 C W 0.250 0.250 RESISTANCE
More informationN-Channel 60 V (D-S), 175 C MOSFET, Logic Level
N-Channel 6 V (D-S), 75 C MOSFET, Logic Level SUD23N6-3L PRODUCT SUMMARY V DS (V) r DS(on) (Ω) I D (A) a.3 at V GS = V 23 6.45 at V GS = 4.5 V 9.5 FEATURES TrenchFET Power MOSFET 75 C Junction Temperature
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationPower MOSFET FEATURES. IRLD024PbF SiHLD024-E3 IRLD024 SiHLD024
Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 5.0 V 0.10 Q g (Max.) (nc) 18 Q gs (nc) 4.5 Q gd (nc) 12 Configuration Single D HVMDIP G S G D S N-Channel MOSFET ORDERING INFORMATION Package Lead
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
KP 1830 AC and Pulse Film Foil Capacitors L max. W max. Marking FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel 0.5 H max. Material categorization: for definitions of compliance
More informationIMPROVED PRODUCT DSM. Vishay Foil Resistors FEATURES INTRODUCTION FIGURE 1 - SCHEMATIC
High Precision Bulk Metal Foil Surface Mount Voltage Divider, TCR Tracking of < 0.5 ppm/ C, Tolerance Match of 0.01 % and Stability of ± 0.005 % (50 ppm) INTRODUCTION Bulk Metal foil technology out-performs
More informationOptocoupler, Photodarlington Output, High Gain, with Base Connection
i79005 DESCRIPTION i79005_ The 4N32 and 4N33 are optically coupled isolators with a gallium arsenide infrared LED and a solicon photodarlington sensor. Switching can be achieved while maintaining a high
More informationZener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
More informationUltrafast Soft Recovery Diode, 60 A FRED Pt
60EPU06PbF 60APU06PbF FEATURES Ultrafast recovery 175 C operating junction temperature Compliant to RoHS directive 2002/95/EC Designed and qualified for industrial level Cathode to base 2 1 3 Cathode Anode
More informationSmall Signal Switching Diode
Small Signal Switching Diode 2 DESIGN SUPPORT TOOLS click logo to get started 3 FEATURES Silicon epitaxial planar diode Fast switching diode in case SOT-23, especially suited for automatic insertion AEC-Q
More informationOptocoupler, Phototransistor Output
Vishay Semiconductors Optocoupler, Phototransistor Output FEATURES DC isolation test voltage 5 V RMS Compliant to RoHS directive 22/95/EC and in accordance to WEEE 22/96/EC APPLICATIONS Programmable logic
More informationSilicon NPN Phototransistor, RoHS Compliant
Vishay Semiconductors Silicon NPN Phototransistor, RoHS Compliant DESCRIPTION 9 1 BPW77 is a silicon NPN phototransistor with high radiant sensitivity in hermetically sealed TO-1 package with base terminal
More informationInfrared Emitting Diode, RoHS Compliant, 875 nm, GaAlAs
TSHA62, TSHA621, TSHA622, TSHA623 DESCRIPTION 94 8389 The TSHA62. series are infrared, 875 nm emitting diodes in GaAlAs technology, molded in a clear, untinted plastic package. FEATURES Package type: leaded
More informationP-Channel 2.5-V (G-S) MOSFET
Si33BDV P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).6 at V GS = -.5 V -.7 -.9 at V GS = -.7 V - 3.8. at V GS = -.5 V - 3.7 FEATURES Halogen-free According to IEC 69-- Definition
More information1 Form A Solid State Relay
FEATURES i1791- DESCRIPTION i17931- The LH1 relay are SPST normally open switches (1 form A) that can replace electromechanical relays in many applications. The relay requires a minimal amount of LED drive
More informationU290/291. N-Channel JFETs. Vishay Siliconix PRODUCT SUMMARY FEATURES BENEFITS APPLICATIONS DESCRIPTION ABSOLUTE MAXIMUM RATINGS
U9/9 N-Channel JFETs PRODUCT SUMMARY Part Number V GS(off) (V) r DS(on) Max ( ) I D(off) Typ (pa) t ON Typ (ns) U9. to 3 U9.5 to.5 7 FEATURES BENEFITS APPLICATIONS Low On-Resistance: U9 < 3 Fast Switching
More informationN-Channel 40-V (D-S), 175 C MOSFET
N-Channel 4-V (D-S), 75 C MOSFET SUD5N4-9H PRODUCT SUMMARY V (BR)DSS (V) r DS(on) (Ω) (A) c Q g (Typ) 4.9 at V GS = V 5 55 FEATURES TrenchFET Power MOSFETS 75 C Junction Temperature High Threshold Voltage
More informationUF4001, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier
UF400, UF4002, UF4003, UF4004, UF4005, UF4006, UF4007 Ultrafast Plastic Rectifier FEATURES Glass passivated chip junction Ultrafast reverse recovery time Low forward voltage drop Low switching losses,
More information