Single Phase Rectifier Bridge, 2 A
|
|
|
- Cordelia Hudson
- 5 years ago
- Views:
Transcription
1 Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current capability RoHS compliant DESCRIPTION A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS I O 2.0 A I FSM A 50 Hz Hz Hz 18 I 2 t A 2 s 60 Hz 16 V RRM 50 to 1000 V T J - 40 to 150 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS PART NUMBER V RRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V RSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V RMS, MAXIMUM RECOMMENDED RMS SUPPLY VOLTAGE 2KBP KBP KBP KBP KBP KBP Document Number: For technical questions, contact: ind-modules@vishay.com Revision: 17-Jun-08 1
2 2KBP Series Single Phase Rectifier Bridge, 2 A FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum DC output current I O A T A = 50 C, resistive or inductive load 2.0 T A = 50 C, capacitive load 1.8 Maximum peak one cycle, non-repetitive surge current Maximum I 2 t capability for fusing I 2 t I FSM condition and with rated V RRM t = 10 ms, 20 ms Following any rated load 60 t = 8.3 ms, 16.7 ms reapplied 63 t = 10 ms t = 8.3 ms 100 % V RRM reapplied Initial T J = T J maximum t = 10 ms No voltage 26 t = 8.3 ms reapplied 23 Maximum I 2 t capability for fusing I 2 t t = 0.1 to 10 ms, no voltage reapplied 255 A 2 s Maximum peak forward voltage per diode V FM I FM = 1 A, T J = 25 C 1.0 V Typical peak reverse leakage current per diode T J = 25 C, 100 % V RRM 10 µa I RM T J = 150 C, 100 % V RRM 1.0 ma Operating frequency range f 40 to 1000 Hz A A 2 s THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL VALUES UNITS Operating junction and storage temperature range T J, T Stg - 40 to 150 C 4 g Approximate weight 0.14 oz. Average Output Current (A) Resistive, inductive load Capacitive load Maximum Peak Output Current (A) From any rated load condition Maximum Allowable Ambient Temperature ( C) Pulse Train Duration (s) Fig. 1 - Ambient Temperature Ratings Fig. 2 - Non-Repetitive Surge Ratings For technical questions, contact: ind-modules@vishay.com Document Number: Revision: 17-Jun-08
3 Single Phase Rectifier Bridge, 2 A 2KBP Series CIRCUIT CONFIGURATION I O + ~ ~ - LINKS TO RELATED DOCUMENTS Dimensions Document Number: For technical questions, contact: ind-modules@vishay.com Revision: 17-Jun-08 3
4 Outline Dimensions Vishay Semiconductors D-44 DIMENSIONS in millimeters (inches) 22 (0.87) 15 (0.59) + ~ ~ (0.69) 6.8 (0.27) Ø 0.75 (0.030) Document Number: For technical questions, contact: indmodules@vishay.com Revision: 04-Jul-08 1
5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000
Single Phase Rectifier Bridge, 2 A
Single Phase Rectifier Bridge, 2 A 2KBP Series FEATURES Suitable for printed circuit board mounting Compact construction RoHS COMPLIANT D-44 PRODUCT SUMMARY I O V RRM 2 A 50 to 1000 V High surge current
Single Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 A FEATURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please
Single Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A VS- Series PRODUCT SUMMARY I O V RRM Package Circuit 1.9 A 1 V to 1 V Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard 2.54
Single Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
Standard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes Vishay High Power Products DO-205AA (DO-8) FEATURES Diffused diode High voltage ratings up to 1200 V High surge current capabilities Stud cathode and stud anode version Hermetic
Single Phase Bridge (Power Modules), 25/35 A
MB Series MB Single Phase Bridge FEATURES Universal, 3 way terminals: Push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume
Single Phase Rectifier Bridge, 1.9 A
Single Phase Rectifier Bridge, 1.9 A PRIMARY CHARACTERISTICS I O 1.9 A V RRM 5 V to 1 V Package Circuit configuration Single phase bridge FEATURES Suitable for printed circuit board mounting Leads on standard
Single Phase Rectifier Bridge, 1.2 A
Single Phase Rectifier Bridge, 1.2 A FEATURES VS-1KAB-E Series Ease of assembly, installation, inventory High surge rating Compact Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
Three Phase Bridge (Power Modules), 25/35 A
26MT/ D-63 FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E3359 approved
Three Phase Bridge (Power Modules), 25 A to 35 A
Three Phase Bridge (Power Modules), 25 A to 35 A D-63 PRODUCT SUMMARY I O 25 A to 35 A V RRM V to 6 V Package D-63 Circuit Three phase bridge FEATURES Universal, 3 way terminals: push-on, wrap around or
Three Phase Bridge, 130 A to 160 A (Power Modules)
Three Phase Bridge, 3 A to 6 A (Power Modules) VS-3-6MT..KPbF Series PRODUCT SUMMARY I O V RRM Package Circuit MTK 3 A to 6 A 8 V to 6 V MT-K Three phase bridge FEATURES Package fully compatible with the
Schottky Rectifier, 1.0 A
VS-BQ040PbF Schottky Rectifier, 1.0 A SMB Cathode Anode FEATURES Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability
Small Signal Fast Switching Diode FEATURES
Small Signal Fast Switching Diode = Cathode = Anode 6 MARKING (example only) FEATURES These diodes are also available in other case styles including the DO- case with the type designation N8, the MiniMELF
Single Phase Rectifier Bridge, 3 A, 6 A
S-, S- Series Single Phase Rectifier Bridge, 3 A, 6 A FEATURES Suitable for printed circuit board or chassis mounting Compact construction High surge current capability Material categorization: for definitions
FlipKY, Chip Scale Package Schottky Barrier Rectifier, 0.5 A
VS-FCSP5H4TR FlipKY, Chip Scale Package Schottky Barrier Rectifier,.5 A FEATURES Ultra low V F to footprint area Very low profile (
High Voltage, Input Rectifier Diode, 10 A
VS-ETS..FPPbF Series, VS-ETS..FP-M3 Series High Voltage, Input Rectifier Diode, A TO-22 FULL-PAK PRODUCT SUMMARY Base cathode 3 Cathode Anode Package TO-22FP I F(AV) A V R 8 V to 2 V V F at I F. V I FSM
VS-70TPS12PbF, VS-70TPS16PbF High Voltage Series High Voltage Phase Control Thyristor, 70 A
High Voltage Phase Control Thyristor, 70 A Super TO-247 PRODUCT SUMMARY 2 (A) 1 (K) (G) 3 Package Super TO-247 Diode variation Single SCR I T(AV) 70 A V DRM /V RRM 1200 V, 1600 V V TM 1.4 V I GT 100 ma
Power Rectifier Diodes (T-Modules), 40 A to 110 A
THF..., THF..., T85HF..., T1HF... Series (T-Modules), A to 1 A FEATURES Electrically isolated base plate D-55 Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly
Schottky Rectifier, 440 A
TO-244 PRODUCT SUMMARY I F(AV) V R Lug terminal anode Base common cathode 44 A 3 V Lug terminal anode 2 FEATURES 5 C operation Center tap module Very low forward voltage drop High frequency operation Guard
Fast Switching Plastic Rectifier
BY9(X,B)-00 thru BY9(X,B)-800 Fast Switching Plastic Rectifier TO-0AC BY9 Series PIN PIN CASE TO-63AB ITO-0AC BY9x Series PIN PIN FEATURES Glass passivated chip junction Superfast recovery time for high
Standard Recovery Diodes (Stud Version), 70 A
Standard Recovery Diodes (Stud Version), 70 A VS- FEATURES High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available DO-203AB
Dual Common-Cathode Schottky Rectifier
SBL(F,B)030CT & SBL(F,B)040CT Dual Common-Cathode Schottky Rectifier TO-0AB SBL0xxCT PIN PIN 3 CASE 3 TO-63AB ITO-0AB 3 SBLF0xxCT PIN PIN 3 FEATURES Guardring for overvoltage protection Lower power losses,
Single phase bridge. (Power Modules), 25 A/35 A
Single Phase Bridge (Power Modules), 25 A/35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 1 V to 1600 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
Three Phase Bridge (Power Module), 45 A to 100 A
40MT1.0P.PbF, 0MT1.0P.PbF, MT1.0P.PbF Series Three Phase Bridge (Power Module), 45 A to A FEATURES Vishay High Power Products MT...PA PRODUCT SUMMARY I O MT...PB 45 A to A Low V F Low profile package Direct
Standard Recovery Diodes, (Stud Version), 85 A
Standard Recovery Diodes, (Stud Version), 85 A FEATURES High surge current capability Stud cathode and stud anode version Leaded version available Types up to 400 V V RRM Designed and qualified for industrial
2-Channel EMI-Filter with ESD-Protection
2-Channel EMI-Filter with 9499 6 5 4 2 3 MARKING (example only) XX YY Dot = pin marking YY = type code (see table below) XX = date code 9957 2 FEATURES Ultra compact LLP75-6A package 2-channel EMI-filter
Single Phase Bridge Rectifier, 2 A
Single Phase Bridge Rectifier, 2 FETURES Suitable for printed circuit board mounting Compact construction High surge current capability Material categorization: for definitions of compliance please see
High Voltage Glass Passivated Junction Plastic Rectifier
High Voltage Glass Passivated Junction Plastic Rectifier SUPERECTIFIER FEATURES Superectifier structure for high reliability application Cavity-free glass-passivated junction Low leakage current High forward
Single phase bridge. (Power Modules), 25 A / 35 A
Single Phase Bridge (Power Modules), 25 A / 35 A D-34 PRIMARY CHARACTERISTICS I O 25 A to 35 A V RRM 200 V to 1200 V Package D-34 Circuit configuration Single phase bridge FEATURES Universal, 3 way terminals:
High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs
High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic package.
FEATURES. Package. PARAMETER SYMBOL PB4006 PB4008 PB4010 UNIT Maximum repetitive peak reverse voltage V RRM V 40 T A = 25 C (2) 4.
Enhanced isocink+ TM Bridge Rectifiers + isocink+ ~ ~ - - ~ ~ + ~ ~ Case Style PB FEATURES UL recognition file number E32394 (QQQX2) UL 557 (see *) Enhanced high-current density single in-line package
Standard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Alloy diode High current carrying capability
High Intensity Red Low Current Seven Segment Display
High Intensity Red Low Current Seven Segment Display DESCRIPTION 19237 This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology
High Performance Schottky Rectifier, 240 A
High Performance Schottky Rectifier, 240 A HALF-PAK (D-67) PRODUCT SUMMARY I F(AV) V R Package Circuit Lug terminal anode Base cathode 240 A 150 V HALF-PAK (D-67) Single diode FEATURES 175 C T J operation
Small Signal Fast Switching Diode
N45WS-G Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD-323 Weight: approx. 4 mg Packaging codes/options: 8/K per 3" reel (8 mm tape), K/box 8/3K per 7" reel (8 mm tape), 5K/box FEATURES Silicon
Schottky Rectifier, 3.0 A
Schottky Rectifier, 3.0 A VS-30BQ040PbF Vishay High Power Products SMC Cathode Anode FEATURES Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced
ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A
FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or
Fast Recovery Diodes (Stud Version), 6 A, 12 A, 16 A
Fast Recovery Diodes (Stud Version), 6 A, 2 A, 6 A DO-23AA (DO-4) FEATURES Short reverse recovery time Low stored charge Wide current range Excellent surge capabilities Standard JEDEC types Stud cathode
Zener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
VS-VSKD91.., VS-VSKC91.., VS-VSKJ91.., VS-VSKE91.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, 100 A
VS-VSKD9.., VS-VSKC9.., VS-VSKJ9.., VS-VSKE9.. Series ADD-A-PAK Generation VII Power Modules Standard Diodes, A PRODUCT SUMMARY I F(AV) Type ADD-A-PAK A Modules - Diode, High Voltage MECHANICAL DESCRIPTION
Enhanced isocink+ Bridge Rectifiers
Enhanced isocink+ Bridge Rectifiers + ~ ~ - - ~ ~ + isocink+ Case Style BU + ~ ~ - * Tested to UL standard for safety electrically isolated semiconductor devices. UL 1557 4th edition. Dielectric tested
Schottky Rectifier, 2 A
Schottky Rectifier, 2 A 21DQ06 DO-204AL Cathode Anode FEATURES Low profile, axial leaded outline High frequency operation Very low forward voltage drop High purity, high temperature epoxy encapsulation
Photovoltaic Solar Cell Protection Schottky Rectifier, 15 A
Photovoltaic Solar Cell Protection Schottky Rectifier, Cathode Anode DO-204AR PRODUCT SUMMARY Package DO-204AR I F(AV) V R 30 V, 35 V, 40 V, 45 V V F at I F 0.48 V I RM max. 70 ma at 125 C T J max. 150
VS-11DQ05, VS-11DQ05-M3, VS-11DQ06, VS-11DQ06-M3 Schottky Rectifier, 1.1 A
Schottky Rectifier, 1.1 A Cathode Anode DO-204AL PRODUCT SUMMARY Package DO-204AL (DO-41) I F(AV) 1.1 A V R 50 V, 60 V V F at I F See Electrical table I RM max. 11.0 ma at 125 C T J max. 150 C Diode variation
Enhanced isocink+ Bridge Rectifiers
Enhanced isocink+ Bridge Rectifiers isocink+ - ~ ~ + Case Style BU * Tested to UL standard for safety electrically isolated semiconductor devices. UL 557 th edition. Dielectric tested to maximum case,
Schottky Rectifier, 2 A
Schottky Rectifier, 2 A Cathode Anode DO-204AL PRODUCT SUMMARY Package DO-204AL (DO-4) I F(AV) 2 A V R 60 V V F at I F 0.55 V I RM max. 0 ma at 25 C T J max. 50 C Diode variation Single die E AS 4.0 mj
SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS
Schottky Rectifier, 9 A
Schottky Rectifier, 9 A Cathode Anode DO-204AR PRODUCT SUMMARY Package DO-204AR I F(AV) 9 A V R 30 V, 35 V, 40 V, 45 V V F at I F 0.42 V I RM max. 70 ma at 25 C T J max. 50 C Diode variation Single die
Standard Recovery Diodes (Stud Version), 12 A
Standard Recovery Diodes (Stud Version), 12 A VS- FEATURES High surge current capability Stud cathode and stud anode version Wide current range DO-203AA (DO-4) Types up to 1200 V V RRM Designed and qualified
High Performance Schottky Rectifier, 100 A
High Performance Schottky Rectifier, A VS-BGQHF4 Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die
Dual N-Channel 30 V (D-S) MOSFET with Schottky Diode
SPICE Device Model SiR77DP Dual N-Channel 3 V (D-S) MOSFET with Schottky Diode DESCRIPTION The attached SPICE model describes the typical electrical characteristics of the n-channel vertical DMOS. The
Schottky Rectifier, 1.0 A
VS-BQ15PbF Schottky Rectifier, 1. A Cathode Anode SMB PRODUCT SUMMARY Package SMB (DO-214AA) I F(AV) 1 A V R 15 V V F at I F.32 V I RM 12 ma at C T J max. 125 C Diode variation Single die E AS 1 mj FEATURES
Schottky Rectifier, 20 A
Schottky Rectifier, 20 A 20TQ...PbF Series TO-220AC PRODUCT SUMMARY I F(AV) V R Base cathode 2 1 3 Cathode Anode 20 A 35 to 45 V FEATURES 150 C operation Low forward voltage drop High frequency operation
Single phase bridge. (Power Modules), 25 A/35 A
Single Phase Bridge (Power Modules), 25 /35 GBPC... PRODUCT SUMMRY I O V RRM Package Circuit GBPC...W 25 to 35 V to V GBPC.., GBPC..W Single phase bridge FETURES Universal, 3 way terminals: push-on, wrap
Medium Power Phase Control Thyristors (Stud Version), 50 A
Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp Series 2 TO-277A (SMPC) Anode Cathode Anode 2 FEATURES Very low profile - typical height of. mm Ideal for automated placement
High Performance Schottky Rectifier, 200 A
High Performance Schottky Rectifier, 200 A VS-203CNQPbF TO-244 PRODUCT SUMMARY I F(AV) V R Package Circuit Lug terminal anode Lug terminal anode 2 Base common cathode 200 A V TO-244 Two diodes common cathodes
Hyperfast Rectifier, 2 x 5 A FRED Pt
Hyperfast Rectifier, 2 x 5 A FRED Pt VS-CSH02HM3 K TO-277A (SMPC) 2 K Cathode Anode Anode 2 FEATURES Hyperfast recovery time, reduced Q rr, and soft recovery 75 C maximum operating junction temperature
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a silicon PIN photodiode with high radiant sensitivity in clear, T-1 plastic package. It is sensitive to visible and near infrared radiation. FEATURES Package type:
Schottky Rectifier, 18 A
Schottky Rectifier, 8 A 8TQ0..PbF Series TO-220AC PRODUCT SUMMARY I F(AV) V R Base cathode 2 3 Cathode Anode 8 A 35 V to 50 V FEATURES 75 C operation Low forward voltage drop High frequency operation High
Dual Common-Cathode Ultrafast Recovery Rectifier
New Product UH0FCT& UHB0FCT Dual Common-Cathode Ultrafast Recovery Rectifier FEATURES Oxide planar chip junction TO-0AB TO-63AB Ultrafast recovery times Soft recovery characteristics Low switching losses,
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, A FEATURES Low leakage current series Good surge current capability up to 00 A Material categorization: for definitions of compliance please
Photovoltaic Solar Cell Protection Schottky Rectifier
Photovoltaic Solar Cell Protection Schottky Rectifier Ultra Low V F =.3 V at I F = 5. A TMBS FEATURES Trench MOS Schottky technology Low forward voltage drop, low power losses High efficiency operation
Schottky Rectifier, 3.3 A
C-6 PRODUCT SUMMARY I F(AV) V R Cathode 3.3 A 90/00 V Anode FEATURES Low profile, axial leaded outline High frequency operation Very low forward voltage drop High purity, high temperature epoxy encapsulation
IR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems MECHANICAL DATA Pinning: 1 = Carrier OUT, 2 = GND, 3 = V S 19026 FEATURES Photo detector and preamplifier in one package AC coupled response from 30 khz to 50
High Current Density Surface Mount Dual Common Cathode Schottky Rectifiers
High Current Density Surface Mount Dual Common Cathode Schottky Rectifiers FEATURES esmp Series Very low profile - typical height of. mm Available Ideal for automated placement Low forward voltage drop,
Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm)
Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) ELECTRICAL SPECIFICATIONS FEATURES All electrical angles available up to: 3600 Accurate linearity down to: ± 0.5 % Very long life:
Part Ordering code Type Marking Remarks BAS85 BAS85-GS18 or BAS85-GS08 - Tape and Reel
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage The devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic
Schottky Rectifier, 3.0 A
VS-30BQ060-M3 Schottky Rectifier, 3.0 A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3.0 A V R 60 V V F at I F 0.52 V I RM 20 ma at 125 C T J max. 150 C Diode variation Single die E AS 5.0 mj
Infrared Emitting Diode, 950 nm, GaAs
Infrared Emitting Diode, 95 nm, CQY37N DESCRIPTION 94 8638-2 CQY37N is an infrared, 95 nm emitting diode in technology molded in a miniature, clear plastic package with lens. FEATURES Package type: leaded
IR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems MECHANICAL DATA Pinning: 1 = Carrier OUT, 2 = GND, 3 = V S 19026 FEATURES Photo detector and preamplifier in one package AC coupled response from 20 khz to 60
Insulated Ultrafast Rectifier Module, 210 A
Insulated Ultrafast Rectifier Module, 2 A SOT-227 1 4 2 3 FEATURES Two fully independent diodes Fully insulated package Ultrafast, soft reverse recovery, with high operation junction temperature (T J max.
1 Form A Solid-State Relay
Form A Solid-State Relay S S' FEATURES Current limit protection 6 DESCRIPTION The LH56AEF ( pin SOP) is robust, ideal for telecom and ground fault applications. It is an SPST normally open switch ( form
VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series Power Silicon Rectifier Diodes, (Stud Version), 35 A, 40 A, 60 A
Power Silicon Rectifier Diodes, (Stud Version), 35 A, 4 A, A FEATURES Low leakage current series Good surge current capability up to A Material categorization: for definitions of compliance please see
Reflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output CNY7 2835 DESCRIPTION The CNY7 is a reflective sensor that includes an infrared emitter and phototransistor in a leaded package which blocks visible light.
Insulated Ultrafast Rectifier Module, 120 A
SOT-227 PRODUCT SUMMARY V R I F(AV) at T C = 65 C t rr 400 V 120 A 35 ns FEATURES Two fully independent diodes Ceramic fully insulated package (V ISOL = 2500 V AC ) Ultrafast reverse recovery Ultrasoft
Single phase bridge. (Power Modules), 25 A, 35 A
Single Phase Bridge (Power Modules), 25 A, 35 A GBPC...A GBPC...W PRIMARY CHARACTERISTICS I O 25 A, 35 A V RRM V to V Package GBPC..A, GBPC..W Circuit configuration Single phase bridge FEATURES Universal,
Standard Recovery Diodes (Stud Version), 400 A
Standard Recovery Diodes (Stud Version), 400 A DO-205AB (DO-9) FEATURES Wide current range High surge current capabilities Stud cathode and stud anode version Standard JEDEC types Designed and qualified
High Current Density Surface Mount Glass Passivated Rectifiers
SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8633 BPV23NF is a PIN photodiode with high speed and high radiant sensitivity in a black, plastic package with side view lens and daylight blocking filter. Filter
Insulated Ultrafast Rectifier Module, 200 A
PRODUCT SUMMARY V R I (1) F(AV) at T C = 87 C per module t rr SOT-227 4 V 2 A 6 ns Note (1) Maximum I RMS current admitted A to do not exceed the maximum termperature of terminals FEATURES Two fully independent
Three Phase Bridge (Power Modules), 25/35 A
26MT/ D-34A FEATURES Universal, 3 way terminals: push-on, wrap around or solder High thermal conductivity package, electrically insulated case Center hole fixing Excellent power/volume ratio UL E359 approved
Standard Recovery Diodes (Stud Version), 150 A
Standard Recovery Diodes (Stud Version), 150 A DO-205AA (DO-8) PRODUCT SUMMARY I F(AV) 150 A Package DO-205AA (DO-8) Circuit configuration Single diode FEATURES Diffused diode High voltage ratings up to
Phase Control Thyristors (Stud Version), 110 A
Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation
Three phase bridge. (Power Module), 200 A
Three Phase Bridge (Power Module), 2 A VS-2MT4KPbF MTK PRIMARY CHARACTERISTICS I O 2 A V RRM 4 V Package MTK Circuit configuration Three phase bridge FEATURES Package fully compatible with the industry
VS-T40HF..., VS-T70HF..., VS-T85HF..., VS-T110HF... Series Power Rectifiers Diodes (T-Modules), 40 A to 110 A
Power Rectifiers Diodes (T-Modules), A to A FEATURES Electrically isolated base plate D-55 (T-module) Types up to V RRM 35 V RMS isolating voltage Simplified mechanical designs, rapid assembly High surge
Power Rectifier Diodes (T-Modules), 2200 V, 20 A
Power Rectifier Diodes (T-Modules), 2200 V, 20 A FEATURES Electrically isolated base plate 2200 V RRM Industrial standard packaging UL approved file E78996 Simplified mechanical designs, rapid assembly
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier
High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp TM Series 2 TO-277A (SMPC) Anode FEATURES Very low profile - typical height of. mm Ideal for automated placement Low forward
Medium Power Silicon Rectifier Diodes, (Stud Version), 12 A
S-1N1...A, S-1N36..A Series Medium Power Silicon Rectifier Diodes, (Stud ersion), 1 A DO-4 (DO-3AA) PRIMARY CHARACTERISTICS I F(A) 1 A Package DO-4 (DO-3AA) Circuit configuration Single FEATURES oltage
Standard Recovery Diodes (Stud Version), 300 A
Standard Recovery Diodes (Stud Version), 300 A DO-205AB (DO-9) PRODUCT SUMMARY I F(AV) 300 A Package DO-205AB (DO-9) Circuit configuration Single diode FEATURES Alloy diode Popular series for rough service
High Voltage, Input Rectifier Diode, 10 A
VS-ETS...PbF Series, VS-ETS...M3 Series High Voltage, Input Rectifier Diode, Base cathode 3 3 TO-C Cathode node PRODUCT SUMMRY Package TO-C I F(V) V R 8 V to V V F at I F. V I FSM 6 T J max. 5 C Diode
General Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
Part Ordering code Type Marking Remarks BAT85S BAT85S-TR or BAT85S-TAP BAT85S Tape and Reel/Ammopack
BAT85S Small Signal Schottky Diode Features Integrated protection ring against static discharge Very low forward voltage AEC-Q0 qualified Compliant to RoHS directive 2002/95/EC and in accordance to WEEE
Dual Common-Cathode Schottky Rectifier
Dual Common-Cathode Schottky Rectifier TO-220AB MBR25xxCT PIN 3 CASE 2 3 TO-263AB ITO-220AB 2 3 MBRF25xxCT PIN 3 FEATURES Guardring for overvoltage protection Lower power losses, high efficiency Low forward
Schottky Rectifier, 2 x 8 A
Schottky Rectifier, 2 x 8 A 6CTQ...PbF Series Vishay High Power Products TO-220AB PRODUCT SUMMARY I F(AV) V R Base 2 common cathode Anode 2 Anode Common 3 cathode 2 x 8 A 60 to 00 V FEATURES 75 C operation
Standard Recovery Diodes, 400 A
VS-VSMD4AW6, VS-VSMD4CW6 Standard Recovery Diodes, 4 A PRIMARY CHARACTERISTICS I F(AV) per module 4 A Type Modules - diode, high voltage Package TO-244 Circuit configuration TO-244 Two diodes common anode,
High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
Vishay Semiconductors High Speed Infrared Emitting Diode, DESCRIPTION 94 8389 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
Power MOSFET FEATURES. IRFBC30PbF SiHFBC30-E3 IRFBC30 SiHFBC30
Power MOSFET PRODUCT SUMMARY (V) 600 R DS(on) (Ω) V GS = 10 V 2.2 Q g (Max.) (nc) 31 Q gs (nc) 4.6 Q gd (nc) 17 Configuration Single TO-220AB G DS ORDERING INFORMATION Package Lead (Pb)-free SnPb G D S
High Efficiency LED in Ø 3 mm Tinted Diffused Package
TLHY44KL2 High Efficiency LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 922 The TLHY44KL2 series was developed for standard applications like general indicating and lighting purposes. It is housed
S07B, S07D, S07G, S07J, S07M
Small Signal Switching Diode, High Voltage S07B, S07D, S07G, S07J, S07M Features For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: