Company Overview. History. AEM s products and services include the following:

Transcription

1 Company Overview AEM, Inc is a global manufacturer redefining the standards of quality and value in the electronic components industry with its leading edge technologies. History was founded in 986. Phenomenal growth since its inception has ranked AEM three times among the Inc. 500 listing of America s Fastest-Growing Private Companies. AEM s outstanding achievements earned a U.S. presidential commendation letter from then President Bill Clinton. In 995, AEM merged the key technical staff of Wallace Technical Ceramics, Inc. That same year, AEM acquired the Mepcopal high-reliability thick-film fuse line from Philips/ Copal. These mergers and acquisitions represented a logical combination of assets and technical abilities to achieve a full spectrum of passive components with superior multilayer ceramic-based technologies. Since 995, AEM has used its technological expertise to successfully grow its current limiting micro-fuse production and holds a dominant position in the circuit protection market in the aerospace industry. In 996, AEM became the first US corporation to start mass production of ferrite chip beads, power beads, and ferrite/ceramic inductors in its San Diego facility. AEM is also the world s sole manufacturer of highreliability ferrite chip beads designed for the space and military use. In 2004, AEM launched a new product line of SolidMatrix surface mount chip fuses which combined AEM s strengths in both circuit protective and multilayer components manufacturing. Today, AEM s Electronic Components Division is poised to become one of the top five global suppliers of SMT multilayer ceramic inductive and circuit protective components in the new millennium. AEM s products and services include the following: Multilayer Ferrite Chip Beads/Power Beads; Multilayer Ferrite/Ceramic Inductors; SolidMatrix Surface Mount Chip Fuses; Multilayer Varistors; High-reliability Current imiting Micro-fuses and Fusistors; High-reliability SMT Fuses; High-reliability Ferrite Chip Beads & Inductors; Turn Key COTS Up-Screening Services; Tin Whisker Mitigation. Mission Our mission goal is to build lasting partnerships with the customers, vendors, employees, and share holders. We are committed to constantly striving for excellence and perfection in providing products and services with the highest quality and values. The Headquarters and esearch & Development The global headquarters and &D Center of AEM are located in Sorrento Valley, San Diego, California s Telecomm Valley. The Factory and Engineering locations include the San Diego facility and a new Suzhou Engineering Center and Manufacturing Base in China-Singapore Suzhou Industrial Park. Products & Services AEM s manufacturing facility From satellites in space, to computers and cellular devices on land and sea, AEM s products are used globally for EMI signal filtering and circuit protection in the telecommunication, PC, consumer electronics, automotive, and aerospace industries.

2 Contents Products Overview and Applications iii MCB Multilayer Ferrite Chip Beads (General Use) 0402 (05) Series (608) Series (202) Series (326) Series 3 2 (3225) Series (456) Series 3 82 (4532) Series 3 Electrical Characteristics 4 MCB Multilayer Ferrite Chip Beads (High Speed) (05) Series 0603 (608) Series 0805 (202) Series 206 (326) Series Electrical Characteristics MBA Multilayer Ferrite Chip Bead Arrays (326) Series 2 MCP Multilayer Ferrite Power Beads (High Current) (608) Series (202) Series (326) Series 4 2 (3225) Series (456) Series 5 82 (4532) Series 5 Electrical Characteristics 6 MCI Multilayer Ferrite Inductors (General Use) Series Series Series 2 Electrical Characteristics Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23 i

3 Contents (cont.) MHI Multilayer Ceramic Inductors (High Frequency) Series Series 25 Electrical Characteristics 26 TFI Thin Film Chip Inductors Series Series Series 30 Inductor Terminology 3 Numbering System 32 eliability Tests 33 Soldering Temperature Profiles, Storage equirements 34 Packaging and Storage 35 Cross eference 36 Patent and Construction Inside Back Cover 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23 ii

4 Products Overview and Applications AEM was the first in the U.S. to start mass production of ferrite beads and ferrite/ceramic inductors using a wet multilayer process. AEM s proprietary materials (inks and pastes), patented processes (US Patent Number 5,650,99) and custom production equipment are the cornerstones for mass producing high quality ferrite and ceramic inductive components. Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202, and 206/326 A complete set of ferrite/ceramics and electrode materials providing a wide range of electrical properties Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes Applications Computers and Peripherals Video cards, sound cards, fax/modem cards, printers, keyboards, network interface cards, PDAs (personal digital assistants), and notebook computers Tele Communications Multi-port modems, frame relays, central office relays, subscription group carrier, T & E MUXs, EA PBX equipment, cellular phones, mobile telephone switching, cellular phone base station and switching, PHS (personal handy phones), and residential and business phones Data Communications Bridges, ANs, modems, repeaters, routers, hubs, concentrators, network I/F cards, and data switches Consumer Electronics VCs, audio, electronic entertainment equipment, car navigation systems, radar detectors, CB & FM radios, CATV, set-top boxes, DSS set-top boxes, electronic games, digital TVs, and DVDs AEM s inductive components are used for noise limiting and separation, tuning and matching circuits, and in many other circuits requiring inductance. AEM s ferrite chip beads have high impedance at 0 MHz and are used for noise suppression. Ferrite beads installed in series with signal and/or power circuits suppress high frequency noise. The noise is converted into heat because of the hysteresis loss in the ferrite material. By selecting the appropriate impedance value, an insertion loss between 3 to 8 db can be achieved using a single chip bead without the need for a ground termination. Typical chip bead suppression frequency ranges from to,000 MHz and rated currents are from 0. to 4.0 amps. AEM s ferrite chip inductors have been used in T, Pi, or type C noise separation circuits with capacitors. Because of the tight tolerances and high Q values of AEM s inductors, very steep attenuation and high insertion losses of up to 0 db can be achieved. Our ferrite inductors have Q values from 5 to 45, measured at frequencies from 0.4 to 50 MHz and self-resonant frequencies in a range from 3 to 320 MHz. The ceramic chip inductors can be used at frequencies up to 8 GHz with Q values from to 5 at 0 MHz and from 6 to 46 at 800 MHz. 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23 iii

5 Multilayer Ferrite Chip Beads Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202, and 206/326 A complete set of ferrite and electrode materials providing a wide range of electrical properties Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes ohs compliant when -T option is specified Applications Noise suppression in computers and peripherals Noise suppression in telecommunications Noise suppression in data communications ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G H 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) 2(3225) 0.73 (4.40) (.50) 0.6 (2.70) 806(456) 0.27 (5.50) 0. (2.80) 0.07 (.80) 82(4532) 0.27 (5.50) 0. (2.80) 0.34 (3.40) Operating Temperature -55ºC +25ºC Product Identification MCB 0805 G P T - T () (2) (3) (4) (5) (6) (7) () Series code: MCB: Multilayer Ferrite Chip Bead (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: F, G (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ±25% Other tolerances may be available upon request. (6) Package code: T = Tape & eel B = Bulk (7) Termination type code: T = 0% Sn plating Shape and Dimensions G SODE W H NICKE SIVE METAIZATION EECTODE BW T CHIP SIZE EIA/EIAJ 0402/ / / /326 2/ /456 82/4532 ENGTH () WIDTH (W) THICKNESS (T) ± ± ± (.00 ± 0.) (0.50 ± 0.) (0.50 ± 0.) ± ± ± (.60 ± 0.5) (0.80 ± 0.5) (0.80 ± 0.5) ± ± ± (2.00 ± 0.20) (.25 ± 0.20) (0.90 ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (.60 ± 0.20) (. ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (2.50 ± 0.20) (.30 ± 0.20) 0.77 ± ± ± (4.50 ± 0.25) (.60 ± 0.20) (.60 ± 0.20) 0.77 ± ± ± (4.50 ± 0.25) (3.20 ± 0.20) (.50 ± 0.20) Other sizes and values may be available upon customer s request. TEMINATION (BW) 0.0 ± (0.25 ± 0.) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

6 MCB Series (General Use) AEM Part Number Ω Tolerance Max. DC Ω MCB0402G0 P Max. I A MCB0402G P MCB0402G P MCB0402G P MCB0402G2 20 P MCB0402G P MCB0402G P MCB0402G P MCB0402G P MCB0402G2 00 P MCB0603G90 9 P MCB0603G P MCB0603G P MCB0603G P MCB0603G P MCB0603G P MCB0603G 0 P MCB0603G2 20 P MCB0603G8 80 P MCB0603G P MCB0603G P MCB0603G P MCB0603G P MCB0603G2 00 P MCB0603G P MCB0805F P MCB0805F70 7 P MCB0805F P MCB0805F P MCB0805F P MCB0805F P MCB0805F P MCB0805G 0 P MCB0805G2 20 P MCB0805G5 50 P MCB0805G P MCB0805G P MCB0805G P MCB0805G P MCB0805G2 00 P MCB0805G P Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)

7 MCB Series (General Use) AEM Part Number Ω Tolerance Max. DC Ω Max. I A MCB206F90 9 P MCB206F P MCB206F P MCB206F P MCB206F P MCB206F P MCB206F 0 P MCB206F2 20 P MCB206F5 50 P MCB206F P MCB206F P MCB206F P MCB206F P MCB206G2 00 P MCB206G52 500@50MHz P MCB2G P MCB806F P MCB806F 0 P MCB82F P MCB82F2 20 P Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

8 Electrical Characteristics (Curves not listed are available upon request) 00 MCB0402G2 00 MCB0402G22 0 0,, (Ohm),, (Ohm) MCB 0603G300 MCB 0603G ,, (Ohm),, (Ohm) MCB 0603G800 MCB 0603G ,, (Ohm),, (Ohm) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

9 Electrical Characteristics (Curves not listed are available upon request) MCB 0603G MCB 0603G ,, (Ohm),, (Ohm) MCB0603G8 MCB 0603G ,, (Ohm),, (Ohm) MCB 0603G60 MCB 0603G ,, (Ohm),, (Ohm) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

10 Electrical Characteristics (Curves not listed are available upon request) MCB 0805F300 MCB 0805F500 MCB 0805F ,, (Ohm),, (Ohm),, (Ohm) MCB 0805G MCB 0805G2 MCB 0805G ,, (Ohm),, (Ohm),, (Ohm) MCB 0805G60 MCB 0805G2 MCB0805G ,, (Ohm),, (Ohm) 0 lzl,, (Ohm) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

11 Electrical Characteristics (Curves not listed are available upon request) MCB 206F300 MCB 206F ,, (Ohm),, (Ohm) MCB 206F600 MCB 206F ,, (O hm),, (Ohm) MCB 206F800 MCB 206F ,, (O hm),, (O hm) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

12 Electrical Characteristics (Curves not listed are available upon request) MCB 206F MCB 206F ,, (O hm),, (Ohm) MCB 206F20 MCB 206F ,, (Ohm),, (Ohm) MCB 206F60 MCB 206G ,, (Ohm),, (Ohm) 0 Z Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

13 Multilayer Ferrite Chip Beads (High Speed) Features Monolithic structure for closed magnetic path and high reliability Standard EIA/EIAJ chip sizes such as 0402/05, 0603/608, 0805/202 and 206/326 Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes ohs compliant when -T option is specified Applications High frequency noise suppression in computers and peripherals High frequency noise suppression in telecommunications High frequency noise suppression in data communications High frequency noise suppression in consumer electronics ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G H 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) Operating Temperature -55ºC +25ºC Product Identification MCB 0805 S 2 P T - T () (2) (3) (4) (5) (6) 7) () Series code: MCB: Multilayer Ferrite Chip Bead (2) Dimensions x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: S (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ±25% Other tolerances may be available upon request. (6) Package code: T = Tape & eel B = Bulk (7) Termination type code: T = 0% Sn plating 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) Shape and Dimensions G SODE W H NICKE SIVE METAIZATION EECTODE BW T CHIP SIZE EIA/EIAJ 0402/ / / /326 ENGTH () WIDTH (W) THICKNESS (T) ± ± ± (.00 ± 0.) (0.50 ± 0.) (0.50 ± 0.) ± ± ± (.60 ± 0.5) (0.80 ± 0.5) (0.80 ± 0.5) ± ± ± (2.00 ± 0.20) (.25 ± 0.20) (0.90 ± 0.20) 0.26 ± ± ± (3.20 ± 0.20) (.60 ± 0.20) (. ± 0.20) Other sizes and values may be available upon customer s request. TEMINATION (BW) 0.0 ± (0.25 ± 0.) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

14 MCB Series (High Speed) AEM Part Number Ω Tolerance Max. DC Ω Max. I A MCB0402S0 P MCB0402S P MCB0402S P MCB0402S P MCB0402S 0 P MCB0402S2 20 P MCB0603S0 P MCB0603S P MCB0603S P MCB0603S P MCB0603S P MCB0603S 0 P MCB0603S2 20 P MCB0603S P MCB0603S P MCB0603S P MCB0603S2 00 P MCB0805S P MCB0805S P MCB0805S P MCB0805S P MCB0805S2 20 P MCB0805S P MCB0805S P MCB0805S P MCB0805S P MCB0805S2 00 P MCB206S90 9 P MCB206S P MCB206S P MCB206S P MCB206S2 20 P MCB206S P MCB206S P MCB206S P MCB206S2 00 P Please add tolerance, packaging and termination type codes when ordering. 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

15 Electrical Characteristics (Curves not listed are available upon request) MCB0603S2 MCB0603S60 MCB0603S ,, (Ohm) 0,, (Ohm) 00 0,, (Ohm) MCB0805S60 MCB0805S ,, (Ohm) 00 0,, (Ohm) MCB206S2 MCB206S ,, (Ohm) 00 0 Z,, (Ohm) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

16 Multilayer Ferrite Chip Bead Arrays Features The Multilayer Ferrite Chip Bead Arrays retain all the features of Multilayer Ferrite Chip Beads. In addition, it provides multiple circuits in a single package, which reduces the required land space on PCB and the cost for assembly. Applications Noise suppression in signal I/O lines and other circuits that require multiple chip beads for noise suppression Operating Temperature - 55 o C + 25 o C Dimensions Product Identification MBA 206 A 300 P 4 T - T () (2) (3) (4) (5) (6) (7) (8) () Series code: MBA: Multilayer Ferrite Chip Bead Array (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristics code: A Standard, B High Speed (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ± 25% (6) Number of circuits: 4 = Four circuits (7) Package code: T = Tape & eel, B = Bulk (8) Termination type code: T = 0% Sn plating INCH (mm) W INCH (mm) T INCH (mm) B INCH (mm) P INCH (mm) E INCH (mm) 0.26±0.008 (3.20±0.20) 0.063±0.008 (.60±0.20) 0.03±0.008 (0.80±0.20) 0.06±0.008 (0.40±0.20) 0.03±0.004 (0.80±0.) 0.02±0.008 (0.30±0.20) AEM Part Number Z@0MHz Tolerance Max. DC Max. I A MBA206A300P4 30 P MBA206A600P4 60 P MBA206A2P4 20 P MBA206A22P4 220 P MBA206A30P4 300 P MBA206A60P4 600 P MBA206A2P4 00 P MBA206B300P4 30 P MBA206B600P4 60 P MBA206B2P4 20 P MBA206B22P4 220 P MBA206B30P4 300 P MBA206B60P4 600 P Please add packaging and termination codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

17 Multilayer Ferrite Power Beads Features Monolithic structure for closed magnetic path and high reliability Maximum permissible currents up to 4A Standard EIA/EIAJ chip sizes such as 0603/608, 0805/202, and 206/326 Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes ohs compliant when -T option is specified Applications Noise suppression in computers and peripherals Noise suppression in telecommunications Noise suppression in data communications Noise suppression in consumer electronics ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G H 0603(608) 0.2 (2.60) (0.55) (0.94) 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) 2(3225) 0.73 (4.40) (.50) 0.6 (2.70) 806(456) 0.27 (5.50) 0. (2.80) 0.07 (.80) 82(4532) 0.27 (5.50) 0. (2.80) 0.34 (3.40) Operating Temperature -55ºC +25ºC Product Identification MCP 0805 F 600 P T - T () (2) (3) (4) (5) (6) (7) () Series code: MCP: Multilayer Ferrite Power Bead (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: F (4) Value code: Impedance (ohms at 0 MHz) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: P = ±25% Other tolerances may be available upon request. (6) Package code: T = Tape & eel B = Bulk (7) Termination type code: T = 0% Sn plating Shape and Dimensions G SODE W H NICKE SIVE METAIZATION EECTODE BW T CHIP SIZE EIA/EIAJ ENGTH () WIDTH (W) 0603/ ± ± (.60 ± 0.5) (0.80 ± 0.5) 0805/ ± ± (2.00 ± 0.20) (.25 ± 0.20) 206/ ± ± (3.20 ± 0.20) (.60 ± 0.20) 2/ ± ± (3.20 ± 0.20) (2.50 ± 0.20) 806/ ± ± (4.50 ± 0.25) (.60 ± 0.20) 82/ ± ± (4.50 ± 0.25) (3.20 ± 0.20) Other sizes and values may be available upon customer s request. THICKNESS (T) 0.03 ± (0.80 ± 0.5) ± (0.90 ± 0.20) ± (. ± 0.20) 0.05 ± (.30 ± 0.20) ± (.60 ± 0.20) ± (.50 ± 0.20) TEMINATION (BW) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) ± 0.02 (0.5 ± 0.30) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

18 MCP Series (High Current) AEM Part Number Ω Tolerance Max. DC Ω Max. I A MCP0603F P MCP0603F P MCP0603F P MCP0603F P MCP0603F2 20 P MCP0603F8 80 P MCP0603F P MCP0603F P MCP0603F P MCP0603F P MCP0805F P MCP0805F P MCP0805F P MCP0805F P MCP0805F2 20 P MCP0805F5 50 P MCP0805F P MCP0805F P MCP0805F P MCP0805F2 00 P MCP206F90 9 P MCP206F P MCP206F P MCP206F P MCP206F 0 P MCP206F2 20 P Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)

19 MCP Series (High Current) AEM Part Number Ω Tolerance Max. DC Ω Max. I A MCP206F P MCP206F P MCP206F P MCP2F P MCP806F P MCP806F P MCP82F P MCP82F2 20 P Definition of rated current: When the rated current is applied to a power bead, its temperature rise shall not exceed 20 C. Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

20 Electrical Characteristics (Curves not listed are available upon request) MCP0805F300 MCP0805F ,, (Ohm) (Ohm) 0 A A 2 A 3 A MCP206F300 MCP206F ,, (Ohm) (Ohm) 0 A A 2 A 3 A MCP206F500 MCP206F ,, (Ohm) (Ohm) 0 A A 2 A 3 A Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

21 Electrical Characteristics (Curves not listed are available upon request) MCP206F800 MCP206F ,, (Ohm) (Ohm) 0 00A 0.67 A.33 A 2.00 A MCP206F2 MCP206F ,, (Ohm) (Ohm) 0.00 A 0.33 A 0.67 A.00 A MCP206F60 MCP206F ,, (Ohm) (Ohm) 0.00 A 0.33 A 0.67 A.00 A Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

22 Multilayer Ferrite Inductors Features Monolithic structure for closed magnetic path eliminating crosstalk and providing high reliability in a wide temperature and humidity range Standard EIA/EIAJ chip sizes such as 0603/608, 0805/202, and 206/326 Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes Applications Prevention of electromagnetic interference to signal for high density circuits in disk drives, personal computers, measuring equipment, and telephone equipment ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G H NCH (mm) 0603(608) 0.2 (2.60) (0.55) (0.94) 0805(202) 0.8 (3.00) (0.66) (.45) 206(326) 0.73 (4.40) (.50) 0.07 (.80) Operating Temperature -40ºC +85ºC Product Identification MCI 0603 J 52 K T - T () (2) (3) (4) (5) (6) (7) () Series code: MCI: Multilayer Ferrite Inductor (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: H, J (4) Value code: Inductance (nh) The first two digits are significant. The last digit specifies the number of zeros to follow. (5) Tolerance code: K = ±% M = ±20% (6) Package code: T = Tape & eel B = Bulk (7) Termination type code: T = 0% Sn plating Shape and Dimensions G SODE W NICKE H SIVE METAIZATION T EECTODE BW CHIP SIZE EIA/EIAJ ENGTH () WIDTH (W) THICKNESS (T) TEMINATION (BW) 0603/ / ± (.60 ± 0.5) ± (2.00 ± 0.20) 0.03 ± (0.80 ± 0.5) ± (.25± 0.20) 0.03 ± (0.80 ± 0.5) <2.7µH ± (0.90 ± 0.20) 2.7µH ± (.25 ± 0.20) 0.04 ± (0.36 ± 0.5) ± 0.02 (0.5 ± 0.30) 206/ ± (3.20 ± 0.20) ± (.60 ± 0.20) ± 0.08 (. ± 0.20) ± 0.02 (0.5 ± 0.30) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

23 MCI Series (General Use) AEM Part Number µh Tolerance Min. Q Test Frequency MHz Min. SF MHz Max. DC Ω Max. I A MCI0603H M MCI0603H M MCI0603H M MCI0603H 0. K, M MCI0603H2 0.2 K, M MCI0603H5 0.5 K, M MCI0603H8 0.8 K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603H K, M MCI0603J2.0 K, M MCI0603J22.2 K, M MCI0603J52.5 K, M MCI0603J82.8 K, M MCI0603J K, M MCI0603J K, M MCI0603J K, M MCI0603J K, M MCI0603J K, M Other values may be available upon request. Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

24 MCI Series (General Use) AEM Part Number µh Tolerance Min. Q Test Frequency MHz Min. SF MHz Max. DC Ω Max. I A MCI0805H M MCI0805H M MCI0805H M MCI0805H 0. K, M MCI0805H2 0.2 K, M MCI0805H5 0.5 K, M MCI0805H8 0.8 K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805H K, M MCI0805J2.0 K, M MCI0805J22.2 K, M MCI0805J52.5 K, M MCI0805J82.8 K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J K, M MCI0805J3 K, M Other values may be available upon request. Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

25 MCI Series (General Use) AEM Part Number µh Tolerance Min. Q Test Frequency MHz Min. SF MHz Max. DC Ω Max. I A MCI206H M MCI206H M MCI206H 0. K, M MCI206H2 0.2 K, M MCI206H5 0.5 K, M MCI206H8 0.8 K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206H K, M MCI206J2.0 K, M MCI206J22.2 K, M MCI206J52.5 K, M MCI206J82.8 K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J K, M MCI206J3 K, M MCI206J53 5 K, M MCI206J K, M MCI206J K, M Other values may be available upon request. Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

26 Electrical Characteristics (Curves not listed are available upon request) MCI 0603 SEIES MCI 0603 SEIES (nh) nh 200 nh 390 nh 0 nh Q nh 200 nh 390 nh 0 nh FEQENCY (MHz) FEQENCY (MHz) MCI 0805 SEIES MCI 0805 SEIES (nh) nh 500 nh 560 nh 68 nh Q nh 500 nh 560 nh 68 nh FEQENCY (MHz) MCI 206 SEIES MCI 206 SEIES (nh) nh 2200 nh 820 nh 50 nh Q nh 2200 nh 820 nh 50 nh FEQENCY (MHz) FEQENCY (MHz) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

27 Multilayer Ceramic Inductors Features Monolithic structure with high reliability Standard EIA/EIAJ chip sizes such as 0402/05 and 0603/608 High quality ceramic material and unique manufacturing processes providing high Q at high frequencies and high self-resonant frequencies Superior termination bonding strength Nickel barrier with solder overplated termination offering excellent solderability and solder leach resistance, suitable for both wave and reflow soldering processes Applications High frequency equipment including cellular phones, pagers, radar detectors, computer communications, etc ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G H 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) Operating Temperature -40ºC +25ºC Product Identification MHI 0603 C N8 S T - T () (2) (3) (4) (5) (6) (7) () Series code : MHI: Multilayer Ceramic Inductor (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: C (4) Value code: Inductance N decimal point for nh Example: N8 =.8 nh decimal point for µh (00 nh) Example: 2 = 0.2 µh = 20 nh (5) Tolerance code: J = ±5% K = ±% S = ±0.3 nh (6) Package code: T = Tape & eel B = Bulk (7) Termination plating code: T = 0% Sn plating Terminations (Sn/Pb plating no longer available) Shape and Dimensions G SODE W H NICKE SIVE METAIZATION EECTODE BW T SIZE EIA/EIAJ ENGTH () WIDTH (W) THICKNESS (T) TEMINATION (BW) 0402/ ± (.00 ± 0.) ± (0.50 ± 0.) ± (0.50 ± 0.) 0.0± (0.25 ± 0.) 0603/ ± (.60 ± 0.5) 0.03 ± (0.80 ± 0.5) 0.03 ± (0.80 ± 0.5) 0.04 ± (0.36 ± 0.5) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

28 MHI Series (High Frequency) AEM Part Number, nh Tolerance Min.Q Typ. MHz Typ. MHz Test Frequency MHz Min. SF MHz Max. DC Ω Max. I A MHI0402CN0.0 S MHI0402CN2.2 S MHI0402CN5.5 S MHI0402CN8.8 S MHI0402C2N2 2.2 S MHI0402C2N7 2.7 S MHI0402C3N3 3.3 S, K MHI0402C3N9 3.9 S, K MHI0402C4N7 4.7 S, K MHI0402C5N6 5.6 S, K MHI0402C6N8 6.8 J, K MHI0402C8N2 8.2 J, K MHI0402CN J, K MHI0402C2N 2 J, K MHI0402C5N 5 J, K MHI0402C8N 8 J, K MHI0402C22N 22 J, K MHI0402C27N 27 J, K MHI0402C33N 33 J, K MHI0402C39N 39 J, K MHI0402C47N 47 J, K MHI0402C56N 56 J, K MHI0402C68N 68 J, K MHI0402C82N 82 J, K MHI0402C 0 J, K Other values may be available upon request. Please add tolerance, packaging and termination type codes when ordering. 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)

29 MHI Series (for high frequency) AEM Part Number, nh Tolerance Min.Q Typ. MHz Typ. MHz Test Frequency MHz Min. SF MHz Max. DC Ω Max. I A MHI0603CN5.5 S MHI0603CN8.8 S MHI0603C2N2 2.2 S MHI0603C2N7 2.7 S MHI0603C3N3 3.3 S, K MHI0603C3N9 3.9 S, K MHI0603C4N7 4.7 S, K MHI0603C5N6 5.6 S, K MHI0603C6N8 6.8 J, K MHI0603C8N2 8.2 J, K MHI0603CN J, K MHI0603C2N 2 J, K MHI0603C5N 5 J, K MHI0603C8N 8 J, K MHI0603C22N 22 J, K MHI0603C27N 27 J, K MHI0603C33N 33 J, K MHI0603C39N 39 J, K MHI0603C47N 47 J, K MHI0603C56N 56 J, K MHI0603C68N 68 J, K MHI0603C82N 82 J, K MHI0603C 0 J, K MHI0603C2 20 J, K MHI0603C5 50 J, K MHI0603C8 80 J, K MHI0603C J, K Other values may be available upon request. Please add tolerance, packaging and termination type codes when ordering Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

30 Typical Electrical Characteristics (Curves not listed are available upon request) M HI 0402 SEIES M HI 0402 Series M HI0402C3N9 M HI0402CN5 30 M HI0402CN M HI0402C6N8 M HI0402C5N6 25 M HI0402C2N7 M HI0402C5N6 M HI0402C6N8 (nh) M HI0402C3N9 M HI0402C2N7 Q 20 M HI0402CN M HI0402CN5 M HI0402CN0 5 5 M HI0402CN F E Q U E N C Y (M H z ) F E Q U E N C Y (M H z ) M HI0603 Series M HI0603 Series M HI0603CN5 70 M HI0603CN 60 M HI0603C3N3 (nh) M HI0603C8N2 Q 50 M HI0603C2N2 M HI0603C6N8 M HI0603C6N8 M HI0603C4N7 M HI0603C5N6 M HI0603C4N7 40 M HI0603C8N2 M HI0603C5N6 30 M HI0603C3N3 M HI0603CN M HI0603C2N2 20 M HI0603CN Frequency (MHz) Frequency (MHz) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

31 Thin Film Chip Inductors Features Photolithographic single layer ceramic chip High SF, superior Q, and excellent temperature stability Precision within ± % or ± 0. nh Applications Cellular telephone, digital camera and GPS products VCO,TCXO Circuits and F transceiver modules Wireless ANs, bluetooth modules, communication appliances ecommended PC Board and Patterns CHIP SIZE EIA/EIAJ G G H H 020(0502) (0.85) 0.0 (0.25) 0.06 (0.40) 0402(05) (.60) 0.06 (0.40) (0.60) 0603(608) 0.2 (2.60) (0.55) (0.94) Shape and Dimensions Operating Temperature -40ºC +85ºC Product Identification TFI 0402 C N8 S T - T () (2) (3) (4) (5) (6) (7) () Series code : TFI: Thin Film Inductor (2) Dimensions: x W inches The first two digits: (length) The last two digits: W (width) (3) Characteristic code: C (4) Value code: Inductance N decimal point for nh Example: N8 =.8 nh decimal point for µh (00 nh) Example: = 0. µh = 0 nh (5) Tolerance code: F = ±% B = ±0. nh G = ±2% C = ±0.2 nh H = ±3% S = ±0.3 nh J = ±5% (6) Package code: T = Tape & eel (7) Termination type code: T = 0% Sn plating W BW T SIZE EIA/EIAJ ENGTH () WIDTH (W) THICKNESS (T) TEMINATION (BW) 020/ ± (0.60 ± 0.05) 0.02 ± (0.30 ± 0.05) ± (0.23 ± 0.05) 0.006± (0.5 ± 0.05) 0402/ ± (.00 ± 0.) ± (0.50 ± 0.) 0.03 ± (0.32 ± 0.) 0.008± (0.20 ± 0.) 0603/ ± (.60 ± 0.5) 0.03 ± (0.80 ± 0.5) 0.08 ± (0.45 ± 0.) 0.02 ± (0.30 ± 0.20) Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

32 TFI Series AEM Part Number, nh Tolerance Min. Q Test Frequency MHz Min. SF GHz Max. DC Ω TFI020C0N 0. B, C, S TFI020C0N2 0.2 B, C, S TFI020C0N3 0.3 B, C, S TFI020C0N4 0.4 B, C, S TFI020C0N5 0.5 B, C, S TFI020C0N6 0.6 B, C, S TFI020C0N7 0.7 B, C, S TFI020C0N8 0.8 B, C, S TFI020C0N9 0.9 B, C, S TFI020CN0.0 B, C, S TFI020CN. B, C, S TFI020CN2.2 B, C, S TFI020CN3.3 B, C, S TFI020CN4.4 B, C, S TFI020CN5.5 B, C, S TFI020CN6.6 B, C, S TFI020CN7.7 B, C, S TFI020CN8.8 B, C, S TFI020CN9.9 B, C, S TFI020C2N0 2.0 B, C, S TFI020C2N 2. B, C, S TFI020C2N2 2.2 B, C, S TFI020C2N3 2.3 B, C, S TFI020C2N4 2.4 B, C, S TFI020C2N5 2.5 B, C, S TFI020C2N6 2.6 B, C, S TFI020C2N7 2.7 B, C, S TFI020C2N8 2.8 B, C, S TFI020C2N9 2.9 B, C, S TFI020C3N0 3.0 B, C, S TFI020C3N 3. B, C, S TFI020C3N2 3.2 B, C, S TFI020C3N3 3.3 B, C, S TFI020C3N4 3.4 B, C, S TFI020C3N5 3.5 B, C, S TFI020C3N6 3.6 B, C, S TFI020C3N7 3.7 B, C, S TFI020C3N9 3.9 B, C, S TFI020C4N7 4.7 B, C, S TFI020C5N6 5.6 G, J TFI020C6N8 6.8 G, J TFI020C8N2 8.2 G, J TFI020CN G, J Other values may be available upon request. Max. I A Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

33 TFI Series AEM Part Number, nh Tolerance Min. Q Test Frequency MHz Min. SF GHz Max. DC Ω Max. I A TFI0402C0N2 0.2 B, C, S TFI0402C0N4 0.4 B, C, S TFI0402C0N8 0.8 B, C, S TFI0402CN0.0 B, C, S TFI0402CN. B, C, S TFI0402CN2.2 B, C, S TFI0402CN3.3 B, C, S TFI0402CN4.4 B, C, S TFI0402CN5.5 B, C, S TFI0402CN6.6 B, C, S TFI0402CN7.7 B, C, S TFI0402CN8.8 B, C, S TFI0402CN9.9 B, C, S TFI0402C2N0 2.0 B, C, S TFI0402C2N 2. B, C, S TFI0402C2N2 2.2 B, C, S TFI0402C2N3 2.3 B, C, S TFI0402C2N4 2.4 B, C, S TFI0402C2N5 2.5 B, C, S TFI0402C2N6 2.6 B, C, S TFI0402C2N7 2.7 B, C, S TFI0402C2N8 2.8 B, C, S TFI0402C2N9 2.9 B, C, S TFI0402C3N0 3.0 B, C, S TFI0402C3N 3. B, C, S TFI0402C3N2 3.2 B, C, S TFI0402C3N3 3.3 B, C, S TFI0402C3N4 3.4 B, C, S TFI0402C3N5 3.5 B, C, S TFI0402C3N6 3.6 B, C, S TFI0402C3N7 3.7 B, C, S TFI0402C3N8 3.8 B, C, S TFI0402C3N9 3.9 B, C, S TFI0402C4N7 4.7 B, C, S TFI0402C5N6 5.6 B, C, S TFI0402C6N2 6.2 B, C, S TFI0402C6N8 6.8 B, C, S TFI0402C7N2 7.2 B, C, S TFI0402C8N0 8.0 B, C, S TFI0402C8N2 8.2 B, C, S TFI0402C9N 9. B, C, S TFI0402CN F, G, H, J TFI0402C2N 2 F, G, H, J TFI0402C4N 4 F, G, H, J TFI0402C5N 5 F, G, H, J TFI0402C7N 7 F, G, H, J TFI0402C8N 8 F, G, H, J TFI0402C20N 20 F, G, H, J TFI0402C22N 22 F, G, H, J TFI0402C27N 27 F, G, H, J TFI0402C33N 33 F, G, H, J Other values may be available upon request Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)

34 TFI Series AEM Part Number, nh Tolerance Min. Q Test Frequency MHz Min. SF GHz Max. DC Ω Max. I A TFI0603CN0.0 B, C, S TFI0603CN2.2 B, C, S TFI0603CN5.5 B, C, S TFI0603CN8.8 B, C, S TFI0603C2N2 2.2 B, C, S TFI0603C2N7 2.7 B, C, S TFI0603C3N3 3.3 B, C, S TFI0603C3N9 3.9 B, C, S TFI0603C4N7 4.7 B, C, S TFI0603C5N6 5.6 B, C, S TFI0603C6N8 6.8 B, C, S TFI0603C8N2 8.2 B, C, S TFI0603CN F, G, H, J TFI0603C2N 2 F, G, H, J TFI0603C5N 5 F, G, H, J TFI0603C8N 8 F, G, H, J TFI0603C22N 22 F, G, H, J TFI0603C27N 27 F, G, H, J TFI0603C33N 33 F, G, H, J TFI0603C39N 39 F, G, H, J TFI0603C47N 47 F, G, H, J TFI0603C56N 56 F, G, H, J TFI0603C68N 68 F, G, H, J TFI0603C 0 G, H, J Other values may be available upon request Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

35 Inductor Terminology Inductance: Inductance is the ability of a conductor to produce induced voltage when the current varies. The symbol for inductance is and the unit is henry (H), H = 00 mh, mh = 00 µh, µh = 00 nh. Inductance of AEM s inductors is measured by using a C meter. Impedance: Impedance is a measure of opposition to current. The symbol for impedance is Z and the unit is ohm and 2 Z = + X 2 where is the resistance (not DC resistance) and X is the reactance. Z, and X are all frequency dependent. Impedance of AEM s chip beads is measured by using a C meter. DC : DC is the resistance of the component measured with direct current. DC of AEM s inductive components is measured by using a milli-ohmmeter. Maximum ated Current: It is a measure of the current carrying capacity of the component. When the maximum rated current is applied to the component, the temperature rise shall not exceed 20 o C. Q: Q is the quality factor of an inductor. It is the ratio of its ability to produce self-induced voltage over the resistance that reduces the current and the induced voltage. It can be considered as the ratio of its capability to store energy over the capability to consume energy. Q is highly dependent on frequency. Q values of AEM s inductors are measured by using an impedance analyzer or a network analyzer and Q = X Using an ideal resistor, an ideal capacitor and an ideal inductor, a real inductor can be simulated. The resistive component in an equivalent circuit comes from the DC resistance of the electrode and the electro-magnetic loss. The capacitive component comes from the parasitic capacitance of the coil. Self-esonant Frequency (SF): When the frequency changes, the capacitive reactance X C and inductive reactance X also change. The self-resonance frequency is the frequency at which the X equals X C. At selfresonance frequency the inductor shows maximum impedance and a minimum line current. The SF shall generally be specified as at least twice the application frequency, except for some special applications. SF of AEM s inductors is measured by using an impedance analyzer or a network analyzer. Equivalent Circuit of an Inductor: C DC Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23

36 Numbering System Product Identification for Discrete Components MCB 0805 G P T - T () (2) (3) (4) (5) (6) (7) () Series code: MCB = Multilayer Ferrite Chip Beads MBA = Multilayer Ferrite Chip Bead Arrays MCP = Multilayer Ferrite Power Beads MCI = Multilayer Ferrite Inductors MHI = Multilayer Ceramic High Frequency Inductors TFI = Thin Film Inductors (2) Size code: From 020 to 82 Other sizes are available. Please consult factory. (3) Characteristic code: A, B, C, F, G, H, J, S, U (4) Value Code: * For MCB, MBA, and MCP (ohm) The first two digits are significant figures. The last digit specifies the number of zeros to follow. Examples: 0 ohms 0 ohms 2 00 ohms Part Number Product Series Chip Size Characteristics Value Tolerance Tape/Bulk Termination Type MCB 0805 (202) F 500 P T T 0402 (05) 0603 (608) Multilayer 0805 (202) 50(0) T = Taped Ferrite Chip 206 (326) F, G, S, U (0) = # of zeros following P = ±25% B = Bulk Beads 2 (3225) 50 ohms T = 0% Sn plating 806 (456) 82 (4532) MBA 206 (326) F 600 P T T Multilayer Ferrite Chip Bead Arrays 206(326) A, B 60((0) (0)=# of zeros following 60 ohms P = ±25% T = Taped B = Bulk 525 Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23 T = 0% Sn plating MCP 0805 (202) F 500 P T T 0603 (608) 0805 (202) Multilayer 50(0) 206 (326) T = Taped Ferrite Power F (0) = # of zeros following 2 (3225) P = ±25% B = Bulk Beads 50 ohms 806 (456) T = 0% Sn plating 82 (4532) MCI 0805 (202) H 56 M T T 0603 (608) 56() Multilayer K = ±% T = Taped 0805 (202) H, J () = # of zeros following Ferrite Inductors M = ±20% B = Bulk 206 (326) 560 nano-henries T = 0% Sn plating MHI 0603 (608) C N5 K T T (N)5 Multilayer N = decimal point J = ±5% Ceramic 0402 (05).5 nano-henries T = Taped C K = ±% High Frequency 0603 (608) ()2 B = Bulk S = ±0.3nH Inductors = decimal point T = 0% Sn plating 0.2 micro-henries TFI 0603 (608) C N5 K T T Thin Film Inductors 020 (0502) 0402 (05) 0603 (608) C (N)5 N = decimal point.5 nano-henries () = decimal point 0. micro-henries * For MCI (nh) The first two digits are significant figures. The last digit specifies the number of zeros to follow. Examples: nh = µh nh = 0.47 µh nh = 4.7 µh * For MHI and TFI (nh, µh) N decimal point for nh Example: N2 =.2 nh decimal point for µh Example: = 0. µh (5) Tolerance code: F = ± % M = ± 20% G = ± 2% P = ± 25% H = ± 3% B = ± 0. nh J = ± 5% C = ± 0.2 nh K = ± % S = ± 0.3 nh (6) Pakage code: T = Tape & eel B = Bulk (7) Termination type code: T = 0% Sn plating F = ±% G = ±2% H = ±3% J = ±5% B = ±0.nH C = ±0.2nH S = ±0.3nH T = Taped B = Bulk T = 0% Sn plating 32

37 eliability Tests For MCB/MBA/MCP/MCI/MHI No. Test equirement Test condition Test reference Soldering heat resistance Z/ ±20%, ± % (MHI) 75% coverage No cracking One dip at 260 C for sec. Mil-Std-202, Method 2 2 Solderability 95% coverage One dip at 255 C for 5 sec. Mil-Std-202, Method Thermal shock 4 oad humidity 5 Mechanical vibration 6 Mechanical shock Z/ ±20% DC max. specified No damage Z/ ±5% DC max. specified No damage Z/ ±% No damage Z/ ±% No damage 500 cycles between -40 C and +5 C Mil-Std-202, Method 7 00 h at 85 C with 85% H and % rated current 0.06 D.A. or 5 G between 2000 Hz Mil-Std-202, Method G, ms, half-sine shocks Mil-Std-202, Method 23 7 Terminal strength No damage 0.5 kg to.5 kg hanging for 30 sec. 2 lb pushing (0402) 8 ife Z/ ±5% DC max. specified 00 h at 85 C with rated current No damage 9 Bending Z/ ±% No damage 2 mm bend for 5 sec. each resistance 5% leached away 5 dips of 5 sec. each at 260 C Solvent resistance Z/ ±% 3 min. in agitated isopropyl alcohol 2 Insulation resistance GΩ 0 VDC for 30 sec. eliability Tests For TFI No. Test equirement Test condition Test reference Bending ±% No damage 3 mm bend for sec. JIS-C Dielectric withstanding voltage >0V 0VA (rms) for min. Mil-Std-202, Method 30 3 Insulation resistance GΩ 0VDC for min. Mil-Std-202, Method Soldering heat resistance ±% One dip at 260 C for sec. Mil-Std-202, Method 2 5 ife ±% 00 h at 85 C JIS-C Moisture resistance ±% 00 h at 40 C with 90% H Mil-Std-202, Method 3 7 ow temperature storage ±% 00 h at -40 C JIS-C Thermal shock ±% cycles between -40 C and +85 C JIS-C Solderability 95% coverage One dip at 245 C for 3 sec. Mil-Std-202, Method Sorrento Valley oad, San Diego, CA 922, U.S.A. Phone: (858)48-02, Fax: (858)48-23