Features. Circuit Schematic. Typical Electrical Characteristics. Applications. Surface Mount EMI Filters Three Terminal Chips. Three Terminal Chips
|
|
- Ferdinand Dalton
- 6 years ago
- Views:
Transcription
1 Features Excellent performance in high current applications Non-polar, surface mountable Superior filtering characteristics Superb ability to withstand transient voltages and surge Offers exceptional solderability and resistance to solder heat vailable in 63, 85, 15 and 186 body size Two amp current rating available vailable lead free/rohs Compliant pplications Cellular telephones and base stations Telecommunication equipment Industrial electronic interface or programmable controllers Electronic automotive equipment Computer and peripheral equipment Circuit Schematic Input Output Typical Electrical Characteristics Capacitance Range COG (NPO) pf to pf X7R pf to, pf YV5, pf and 2, pf Capacitance Tolerance COG (NPO) +/-% X7R +/-% Y5V +8/-% Temperature Coefficient COG (NPO) ±/ ppm/ C, to +125 C X7R +/-15%, to +125 C Y5V -25 to +85 C Insulation Resistance up to, pf MΩ , pf MΩ DC Resistance mp or less.3 Ohm max mp.8 Ohm max mp.4 Ohm max. Rated Voltage up to VDC Rated Current up to 2 mps SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 35
2 Insertion Loss (Per MIL-STD-2) SF63 Series Insertion loss (db) SF85 Series.4 mp , 2, 1 SF15 Series.3 and.5 mps mp 8 7 6, 2 1, 2, 1 Insertion loss (db) 1 mp mp 7 6, 1 1 mp 8 7 6,.1 1 SF186 Series.3 mp mp 7 7 6,, 1, 2, ,.1 1 1, 36 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
3 Selection Guide Rated Rated IR DC Body Capacitance Capacitance Temp. Voltage Current (Megohms Resistance Operating Part Number Size (in picofarad) Tolerance Charact. (Volts DC) (mps DC) Min.) (ohm Max.) Temp. SF63C2SBNB-* 63 +/-% COG.3,.3-55/+125 C SF63CSBNB-* 63 +/-% COG.3,.3-55/+125 C SF63C1SBNB-* 63 +/-% COG.3,.3-55/+125 C SF63C1SBNB-* /-% COG.3,.3-55/+125 C SF63X1SBNB-* 63 +/-% X7R.3,.3-55/+125 C SF63X2SBNB-* 63 1, +/-% X7R.3,.3-55/+125 C SF63X2SBNB-* 63 2, +/-% X7R.3,.3-55/+125 C SF63X3SNC-* 63, +/-% X7R 25.5,.15-55/+125 C SF63Y4SND-* 63, +8/-% Y5V ,.8-25/+85 C SF85C2SBNC-* 85 +/-% COG.4,.3-55/+125 C SF85CSBNC-* 85 +/-% COG.4,.3-55/+125 C SF85C1SBNC-* 85 +/-% COG.4,.3-55/+125 C SF85C1SBNC-* /-% COG.4,.3-55/+125 C SF85X1SBNC-* 85 +/-% X7R.4,.3-55/+125 C SF85X2SBNC-* 85 1, +/-% X7R.4,.3-55/+125 C SF85X2SBNC-* 85 2, +/-% X7R.4,.3-55/+125 C SF85X3SBND-* 85, +/-% X7R 1.,.8-55/+125 C SF15C2SBNB-* 15 +/-% COG.3,.3-55/+125 C SF15CSBNB-* 15 +/-% COG.3,.3-55/+125 C SF15C1SBNB-* 15 +/-% COG.3,.3-55/+125 C SF15C1SBNB-* /-% COG.3,.3-55/+125 C SF15X1SBNB-* 15 +/-% X7R.3,.3-55/+125 C SF15X2SBNB-* 15 1, +/-% X7R.3,.3-55/+125 C SF15X2SBNB-* 15 2, +/-% X7R.3,.3-55/+125 C SF15X3SBNB-* 15, +/-% X7R.3,.3-55/+125 C SF15X3SBND-* 15, +/-% X7R 1. 5,.8-55/+125 C SF186C2SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186CSDNB-* 186 +/-% COG.3,.3-55/+125 C SF186C1SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186C1SDNB-* /-% COG.3,.3-55/+125 C SF186C1SDNB-* 186 +/-% COG.3,.3-55/+125 C SF186X2SDNB-* 186 1, +/-% X7R.3,.3-55/+125 C SF186X2SDNB-* 186 2, +/-% X7R.3,.3-55/+125 C SF186X3SDNB-* 186, +/-% X7R.3,.3-55/+125 C SF186X3SDNB-* 186, +/-% X7R.3,.3-55/+125 C 2 MP FILTER SF186Y4ZBNE-* 186 2, +8/-% Y5V 2. 1,.4-25/+85 C Bold Letter = High Current pplications = Temperature Characteristic is +/-8% -* = Denotes Packaging Style. Replace with T for Tape and Reel or B for Bulk SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 37
4 LE LM LE Surface Mount EMI Filters L T W Mechanical Dimensions End Middle Body Body Body Terminal Terminal Body Length Width Thickness Length Length Style/Size (L) (W) (T) (LE) (LM).63 +/ / / /-.6. +/-.6 SF63 (1.6 +/-.15) (.8+/-.15) (.6+/-.15) (.2 +/-.15) (.5 +/-.15) SF / / / / /-.8 (2. +/-.2) (1.25 +/-.2) (.8 +/-.2) (.3 +/-.2) (.6 +/-.2) SF / / / / /-.12 (3.2 +/-.2) (1.25 +/-.2) (.7 +/-.2) (.4 +/-.3) (1.1 +/-.3) SF / / / / /-.12 (4.5 +/-.3) (1.6 +/-.3) (1. +/-.3) (.5 +/-.3) (1.4 +/-.3) Ordering Information Example: SF85C1SBNCT This part number represents a three terminal chip with a body size of 85 with a COG (NPO) dielectric. The capacitance is 2 pf with a capacitance tolerance of +%/-%. Voltage rating is Volts DC. It has nickel barrier, solder plated terminations and a current rating of.4 mp, ( milliamps). The parts are taped and reeled. SF 85 C 1 S B N C T Style Size Ceramic Capacitance Capacitance Rated Termination Current Packaging Code Tolerance Voltage (Vdc) Rating SF 63 C - COG First Two S - +%/-% - 25 N - Ni Barrier, B -.3 T -Tape 85 X - X7R Numbers are Z - +8%/-% B - Solder C -.4 and Reel 15 Y - Y5V Significant, D - Plated D - 1 B - Bulk 186 the Third E - 2 Number F - 3 Refers to G - 4 Number of H - 5 Zeroes I SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
5 Soldering Specifications Soldering Instructions Reflow Soldering Flow Soldering C Recommended Board Pattern Top view Connects to top Bottom view Recommended Board Pattern Top view E D F Bottom view B Through hole.16 to.24 (.4 to.6) Copper Copper Resist B C Connects to top Through hole.16 to.24 (.4 to.6) Reflow Soldering Recommended Solder Temperature Profile Degrees (C) 2 1 Board Pattern Body Dimension Style/Size B C SF63. (.5). (1.2).31 (.8) SF85.24 (.6).59 (1.5).39 (1.) SF15.51 (1.3).91 (2.3). (1.2) SF (2.).138 (3.5).51 (1.3) Preheat Solder Cool down 1 to 1 C to 2 C max. 1 min. Seconds General Soldering Notes 1. High soldering temperatures and long soldering times can cause leaching of the termination and adversely affect adhesion. These conditions can also decrease capacitance value. Use the above recommended solder temperature cycle. 2. Due to the mechanical characteristic of ceramic composition, aggressive thermal shock will degrade performance. Preheat the assembly before soldering using the above solder temperature profile as a guide. Flow Soldering Board Pattern Body Dimension Style/Size B C D E F SF63. (.5).31 (.8). (1.2).31 (.8) (1.8) (.4) SF85.24 (.6).31 (.8).59 (1.5).39 (1.).87 (2.2).24 (.6) SF15.51 (1.3).59 (1.5).91 (2.3). (1.2).118 (3.).24 (.6) SF (1.5).79 (1.5).138 (3.5).51 (1.3).118 (3.).24 (.6) Recommended Solder Temperature Profile Degrees (C) 2 1 Preheat Solder Cool down 1 to 1 C to 2 C min. Seconds 3. Use mild flux (less than.2% by weight of Chlorine), preferable rosin based. If water soluble, wash thoroughly to assure all residue is removed from the underside of components. 4. Ultrasonic Cleaning When using an ultrasonic cleaning method, the following range is recommended: Frequency: Not to exceed 28KHz Output Power: Not to exceed W/liter Cleaning Time: 5 minutes max SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 39
6 Package Information Paper Tape Dimensions SF85 and SF15 Bodies Surface Mount EMI Filters Packaging Specifications D1 C C1 C2 E T1 Package Quantities W B F Body Style/Size SF63 SF85 SF15 SF186 Tape and Reel 4, units/reel 4, units/reel 4, units/reel 2, units/reel Chip Cavity Tape Holes Hole Diameter Thickness Body Center Indexing Center Indexing Indexing to Carrier Style/ Length Width Width to End to End to Center to Center Indexing Indexing Overall Tape Size B W F E C C1 C2 D1 T (Max.) T1 (Max.) SF63 +/-.? +/-.? +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1. +/-.?) (1.9+/-.?) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) SF85 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1.62 +/-.2) (2.3 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) SF15 +/-.8 +/-.8 +/-.12 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1.7 +/-.2) (3.5 +/-.2) (8. +/-.3) (3.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) ( /-) (1.1) (1.) T Plastic Reel Dimensions Body Style/Size Diameter (Max.) Width (Max.) SF63 7. (18).46 (11.5) SF85 7. (18).46 (11.5) SF15 7. (18).46 (11.5) SF (18).61 (11.5) Package Information Tape and Reel Specification Plastic Carrier Tape Dimensions SF186 Body D1 C C1 C2 Chip Cavity Tape Holes Hole Diameter Thickness Body Center Indexing Center Indexing Indexing to Style/ Length Width Width to End to End to Center to Center Indexing Center Indexing Overall Tape Size B W F E C C1 C2 D (Min.) D1 T (Max.) T1 (Max.) SF186 +/-.8 +/-.8 +/-.8 +/-.2 +/-.4 +/-.4 +/-.4 +/ /- (1.8 +/-.2) (4.7 +/-.2) (12. +/-.2) (5.5 +/-.5) (1.75 +/-.1) (4. +/-.1) (2. +/-.1) (4. +/-.1) (1.5) ( /-) (2.5) (.6) W B ød Center hole E F T T1 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
7 LC Features High efficiency EMI surface mount filter Ideally suited for high frequency signal lines Steep insertion loss (IL) characteristics vailable in 63, 85 and 16 body sizes LC63 Style Insertion loss (Reference) LC Typical Electrical Characteristics Cut-off Frequency Ranges MHz to 2 MHz ± % Rated Voltage Volt Rated Current m IR MΩ min. Operating Temperature Range C to +85 C LZ Features Monolithic construction of dielectric and ferrite materials Band stop filter with a choice of rejected frequency band K 1 LC63M3MN 2 LC63M3MN 3 LC63M4MN LC85 Style M M 1G Insertion loss (Reference) G Little delay and distortion from original signal wave vailable in the 2 and 63 body sizes LZ Typical Electrical Characteristics Center Frequency Ranges MHz to 2, MHz ± % Rated Current m and m Rejected Bandwidth dec. to 1.5 dec. Operating Temperature Range C to +85 C LC/LZ pplications K 1 LC85M3MN 2 LC85M3MN 3 LC85M3MN 4 LC85M4MN 5 LC85M4MN LC16 Style 1M M M 1G Insertion loss (Reference) G Telecommunication equipment, fax, modem, and DSL Computer and peripheral equipment Digital V equipment, such as TV, VCR and DVD Digital circuit equipment noise countermeasure 1 LC16M3MN 2 LC16M3MN 3 LC16M3MN 4 LC16M4MN K 1M M M 1G G SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 41
8 Specifications Part Number Body Cut-off Frequency Cut-off Frequency Size (MHz) Tolerance LC63M3MN-* LC63M3MN-* 63 LC63M4MN-* LC85M3MN-* LC85M3MN-* LC85M3MN-* 85 ± % LC85M4MN-* LC85M4MN-* 2 LC16M3MN-* LC16M3MN-* 16 LC16M3MN-* LC16M4MN-* -* Denotes packaging style, replace with T for tape and reel or B for bulk Rated Voltage Rated Current I.R. (Min.) Temperature Range 25 V m MΩ - C +85 C Ordering Information Example: LC16M3MNT This part number represents an LC EMI filter chip with a body size of 16. The cut-off frequency is MHz with a tolerance of ± %, voltage rating is 25 Volts DC. It has nickel barrier, solder plated termination and a current rating of.1 mp ( milliamps). The parts are taped and reeled. LC 16 M3 M N T Style Size Cut-off Cut-off Rated Termination Rated Packaging Frequency Tolerance Voltage Current LC 63 M3 = MHz M = ± % = 25 VDC N = Ni Barrier, =.1 T = Tape 85 Solder Plated ( m) and Reel 16 B = Bulk 42 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
9 Specifications Part Number LZ2Z824MBNB-* LZ2B5MBNB-* LZ2Y155MBNB-* LZ2Y5MBNB-* LZ633MCN-* LZ633MCN-* LZ633MCN-* LZ634MCN-* LZ63B3MCN-* LZ63B4MCN-* LZ63B4MCN-* LZ63C4MDN-* Body Size 2 63 Cut-off Frequency (MHz) 8 1, 1, 2, 2 Cut-off Frequency Tolerance ± % Rejected Bandwidth (dec.) Max. Insertion Loss db 15 db db Rated Current m m Operating Temperature Range -25 C +85 C -* Denotes packaging style, replace with T for tape and reel or B for bulk LZ2 Style Insertion loss (Reference) LZ63 Style Insertion loss (Reference) M 1 LZ2B824MNB 2 LZ2B5MNB 3 LZ2B155MNB 4 LZ2B5MNB M 1G G 1M M M 1G 1 LZ633MN 2 LZ633MN 3 LZ633MN 4 LZ634MN 5 LZ63B3MN 6 LZ63B4MN 7 LZ63B4MN 8 LZ633MN G Ordering Information Example: LZ2B824MBNBT LZ 2 B 824 M B N T Style Size Rejected Center Center Max. Termination Rated Packaging Bandwidth Frequency Frenquency Insertion Current Tolerance Loss LZ 2 =.5 dec. 8 MHz M = ±% B = db N = Ni =.1 T = Tape 63 Z =.75 dec. C = 15 db Barrier, (m) and Reel B = 1. dec. D = db Solder B =.5 B = Bulk Y = 1.25 dec. Plated (m) C = 1.5 dec. SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 43
10 LC 63, 85 & 16 LE LM LE Surface Mount EMI Filters L T Circuit Schematic W LC 63 B B LZ 2 & 63.25±.1 LE.25±.1 LC 85 & 16.5±.5 T 1.±.5 L LZ 2 & 63.5±.5 W Mechanical Dimensions Body Body Body End Terminal Middle Terminal Body Length Width Thickness Length Length Style/Size (L) (W) (T) (LE) (LM) LZ2 LZ63 LC63 LC85 LC16.39±.2.±.2.±.2.±.4 (1.±.5) (.5±.5) (.5±.5) (.25±.).63±.8.31±.8.31±.8.12±.8 (1.6±.) (.8±.) (.8±.) (.±.).63±.4.31±.4.24±.4.±.8.16±.8 (1.6±.) (.8±.) (.6±.) (.25±.) (.±.).79±.7.49±.4.31±.8.12±..24±.12 (2.±.18) (1.25±.) (.8±.) (.±.25) (.6±.).126±.8.63±.8.39±.8.16±.12.43±.12 (3.±.) (1.6±.) (1.±.) (.±.) (1.±.) Package Quantities Body Style/Size LZ2 LZ63 LC63 LC85 LC16 Tape and Reel, units/reel 4, units/reel 4, units/reel 4, units/reel 2, units/reel 44 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
11 Surface Mount Filter rrays S Series Features The filter s structure minimizes residual inductance with a high self resonant frequency, ensuring large insertion loss in a wide band. The common ground electrode built into the chip ensures complete grounding of all lines at the ground on both ends. The filter is designed to control cross talk. n optimum constant can be selected from the capacity range of -, pf to best suit the frequency. Solder plated nickel barrier terminations offer good solderability and resistance to soldering heat. vailable lead free/rohs Compliant pplications Noise reduction for DC lines on computers Computer peripheral equipment Digital TV & VTR Cellular telephones utomotive electronics Typical Electrical Characteristics Rated Voltage VDC to VDC Rated Current mps IR , MΩ Min. DC Resistance Ω Max. Temperature Range C to +125 C Capacitance Range pf to, pf Capacitance Tolerance...±% Specifications Circuit Schematic Insertion Loss GND Dimensions.125 (3.2±.2).62 (1.6±.2).27 (.7±.2).31 (.8±.2).15 (.4±.2).31 (.8±.1) S Series Filter rrays Part Number Rated Voltage Rated Temperature DC Operating Capacitance (@ /6Hz) Current Characteristic IR Resistance Temp (pf) S16C2 S16C C C S16C1 C VDC S16C1.3 DC C, MΩ.3Ω max. -55/+125 C 2 S16U1 S16R2 S16R2 U R R min. 1, 2, S16R3 25 VDC R, SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site: 45
12 Surface Mount Filter rrays S Series Ordering Information S 16 C 2 M B N B Style S Series Size 16 Temperature Characteristics C +/- ppm/ C R +/- 15% U -7 +/- 1 ppm/ C Capacitance Capacitance pf pf pf Capacitance tolerance M = ± % Rated Voltage (Vdc) = 25 B = Termination N = Ni Barrier Solder Plated Packaging T - Tape and reel 4, pc/reel B - Bulk pack 1, pcs/bag 2 pf pf 1, pf 2, pf S Tape and Reel Packaging, pf ø.58 (1.5±.1-).157 (4.±.1).78 (2.±.1).157 (4.±.1).68 (1.75±.1).42 (1.1) Max..314 (8.±.3).1 (3.6±.2).137 (3.5±.5) Chip.78 (2.±.2).54 (1.4) Max. S Series Filter rrays Recommended Board Pattern Top side.11 (.3) PO.31 (.8) chip GND.86 (2.2).15 (.4).39 (1.) GND Top side.86 (2.2).15 (.4) GND.11 (.3).39 (1.) PO.31 (.8) chip GND.2 (2.6).2 (2.6) Copper foil pattern.23 (.6) Copper foil pattern.23 (.6) Bottom side Bottom side Ground pattern Ground pattern Through hole Through hole 46 SPECTRUM CONTROL INC. 831 vonia Rd. Fairview, P Phone: Fax: Web site:
Surface Mount EMI Filters
Surface Mount EMI Filters our family of surface mount filters is designed to provide a range of high performance EMI filtering options with a minimal PCB footprint Three Terminal Chips offer superior ability
More informationexpertise Spectrum Control s test design manufacture
In 1968, Spectrum Control was founded as a solutions-oriented company designing and manufacturing products to suppress or eliminate electromagnetic interference (EMI). In the years that followed we adapted
More informationMARUWA GENERAL CATALOG. Chip Type EMI Filters. Automotive electronics. Computer & peripherals. Digital TV
hip Type EMI ilters Series (Pages) Style Equivalent circuit eatures pplications L compound EMI ilter L Series (P42) hip type EMI ilter N,NH Series (P43) EMI chip filter with the circuit formation The sharp
More informationBuried Broadband Capacitors How To Order
Quick Select by Application and Resonant Free Bandwidth Size Resonant Free Bandwidth** Typical Insertion Loss (S21)*** 2 Cap Values in Parallel (pf) Temp. Coeff. Working VDC FIT Calc. using cont. op. temp.
More informationC 062 C 105 K 1 R 5 T A Rated Voltage (VDC) 5 = 50 1 = = 200
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, X7R Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in X7R dielectric feature
More informationS C A 69 B 104 J W S. Capacitance Code (pf)
SCA Series, Axial, C 3 Technology, C0G Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s SCA Series axial through-hole ceramic capacitors in C0G dielectric feature proprietary Ceramic Cased Capacitor
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationChip Resistors / Chip Arrays
Chip Resistors / Chip Arrays w w w. b o u r n s. c o m I. CR Series Chip Resistors...92 II. CAT/CAY Series Chip Resistor Arrays...96 CAT/CAY 16 Series...96 CAY1 Chip Resistor Array...97 CAY17 Bussed Resistor
More informationCHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: NP0/X7R (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage SC type: (Pb Free & RoHS compliant) 2.2 pf to 4.7 nf Product specification Mar 1, 2007 V. 0 Product specification 2 SCOPE This specification
More informationDATASHEET CUSTOMER : 승인번호 ISSUE DATA SHEET. We have approved the attached specification. Written by Checked by Approved by
CUSTOMER : 승인번호 ISSUE DATA SHEET Product Name : Part No : Revision Date : 2012/11/23 Customer Code : We have approved the attached specification. Written by Checked by Approved by CUSTOMER Signature R
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationMultilayer Ceramic Chip Capacitors
NMC-T Low rofile Series FEATURES X7R, X5R AND Y5V DIELECTRICS HIGH CAACITANCE & LO ROFILE RoHS COMLIANT SAC SOLDER COMATIBLE RoHS Compliant Includes all homogeneous materials *See art Number System for
More informationCR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
More informationRated Voltage 3 = 25 V 5 = 50 V
Axial Through-Hole Multilayer Ceramic Capacitors Aximax, 400 Series, Axial, Conformally Coated, X8L Dielectric, 25 50 VDC (Commercial & Automotive Grade) Overview KEMET s Aximax conformally coated axial
More informationRated (VDC) 3 = 25 5 = 50 X7R 1 = = 200 A = 250
Axial Leaded Multilayer Ceramic Capacitors Aximax, 400, Conformally Coated, X7R Dielectric, 25 250 VDC (Commercial Grade) Overview KEMET s Aximax conformally coated axial leaded ceramic capacitors in X7R
More informationThin Film Ultra Precision Resistors
Type RU73 Series Key Features High precision - TCR 2ppm/ C and 3ppm/ C Tolerance down to 0.01% Thin film (nichrome) Available in standard and high power versions Terminal finish electroplated 100% matte
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More information50W TO220 High Power Resistors
50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal
More informationType RN73 Series. Thin Film Precision Resistors. Electrical Characteristics. Key Features. Applications
Type RN73 Series Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Terminal finish electroplated 100% matte Sn Applications Communications Industrial Controls
More informationelectromagnetic integrated solutions short form catalog
electromagnetic integrated solutions short form catalog Electromagnetic Integrated Solutions API Technologies has been the world s leading provider of custom application-specific EMI filter solutions since
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationKete Microwave Electronics Co., Ltd.
HOW TO ORDER: KTFC - X XX X - XX XX - XXX XX - XXXX - XXXX Large Dia. Body Width Rated Voltage Kete Small Dia Lead Dia. VDC/VAC Feedthru Capacitors Dielectric X=X7R, S=SL, N=NPO (-55 ~+125 ) Y=Y5U, Y5V
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationNovember Common Mode Filters. For automotive power line. ACM-V series ACM4520V ACM70V ACM90V ACM12V
E M C C o m p o n e n t s November 0 Common Mode Filters For automotive power line ACM-V series ACM50V ACM70V ACM90V ACMV (/) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS High-voltage: NP0/X7R (Pb Free & RoHS compliant) 1K V TO 4K V 10 pf to 33 nf Sep 30, 2005 V. 1 2 SCOPE This specification describes Highvoltage
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant)
w DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage: NP0/X7R (Pb Free & RoHS compliant) 100 V TO 500 V 10 pf to 470 nf Product specification Sep 08, 2005 V. 0 Product specification 2 SCOPE
More informationSpark Gap (SPG) Data Sheet
Spark Gap (SPG) ata Sheet Features Approximately zero leaking current before clamping voltage Less decay at on/off state. High capability to withstand repeated lightning strikes. Low electrode capacitance(
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
More informationJuly terminal filters. For power line. ACH series. ACH32C type. * Dimensions Code JIS[EIA] Caution
E M C C o m p o n e n t s July 2017 3-terminal filters For power line ACH series ACH32C [1206 inch]* * Dimensions Code JIS[EIA] Caution (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationElectronic Lighting Ballasts
Syfer Technology Limited, Old Stoke Road, Arminghall, Norwich, Norfolk, NR14 8SQ, United Kingdom Tel: +44 (0) 1603 723300 Tel. (Sales): 01603 723310 Fax: +44 (0) 1603 723301 Email: sales@syfer.co.uk Web:
More informationModel BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
More informationData Sheet. Chun Ann J.C Liu. Customer: Thin Film Precision Chip Resistor - AR Series. Checked. Product :
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 Produced by Checked Approved by Prepared
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationKete Microwave Electronics Co., Ltd.
HOW TO ORDER: KTFC - X XX X - XX XX - XXX XX - XXXX - XXXX Large Dia. Body Width Rated Voltage Kete Small Dia Lead Dia. VDC/VAC Feedthru Capacitors Dielectric X=X7R, S=SL, N=NPO (-55 ~+125 ) Y=Y5U, Y5V
More informationBNX. Block Type EMIFILr. Series Line Up Function Example Product Detail!Caution/Notice Soldering and Mounting Packaging Design Kits. C31E.
CE.pdf Mar.28,2 NX Series Line Up Function Example Product Detail!Caution/Notice Soldering and Mounting Packaging Design Kits 88 88 9 95 97 2 22 CE.pdf Mar.28,2 NX Series Line Up / Function Example Type
More informationPrecision Thin Film Precision Resistors
Key Features Thin film precision resistors with TC's of 15ppm, 25ppm and 50ppm and tolerances to 0.1%. Applications in measurement, telemetry and for sensing circuits. Case sizes 0402, 0603, 0805, 1206,
More informationSelection Series: E24 & E96 E24 & E96 Temp. Coefficient (ppm/ C):
Thin Film Precision Resistors 1206 1210 Rated Power @ 70 C: 0.125W 0.2W Resistance Range (Ohms) Min: 4R7 4R7 4R7 1R0 4R7 1R0 4R7 4R7 4R7 1R0 4R7 1R0 Max: 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5 1M0 2M5
More informationModel BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
More informationModel BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationSPECIFICATION. Product Name : 2.4GHz Band Dielectric Ceramic PIFA SMT Antenna for Bluetooth/WLAN/Zigbee Applications
SPECIFICATION Part No. : PA.11 Specification No : PA-2400-15-10-A-02 Product Name : 2.4GHz Band Dielectric Ceramic PIFA SMT Antenna for Bluetooth/WLAN/Zigbee Applications Description : 2400-2484Mhz, 1.5dBi
More informationThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
More informationJuly Common Mode Filters. For power line. ACM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 0 Common Mode Filters For power line ACM series ACM50 ACM7060 ACM9070 ACM ACM5 [808 inch]* [8 inch] [68 inch] [8 inch] [605 inch] * Dimensions Code JIS[EIA] (/5) REMINDERS
More informationTypes MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged fexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
More informationP21BN300M5S Milli Cap
P21BN300M5S Milli Cap Milli Cap : The "Ideal" SMT Capacitor Benefits: Increased Useable Bandwidth Very Low Series Inductance Ultra High Series Resonance Low Loss, High Q Functional Applications: Matching
More informationYAGEO CORPORATION SMD RESISTORS. RC Series FEATURES. Extremely Thin and Light. Highly Reliable Multilayer Electrode Construction
YAGEO CORPORATION SMD RESISTORS Thick Film Chip Resistors RC Series FEATURES Extremely Thin and Light Highly Reliable Multilayer Electrode Construction Compatible with all Soldering Process Highly Stable
More informationGas Discharge Tube (GDT) Data Sheet
Gas Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance. Low
More informationSPECIFICATION. Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna
SPECIFICATION Part No. : SDWA.01 Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna Features : High Efficiency/ High Peak Gain 2400 MHz to 2483 MHz - Peak Gain 4.4 dbi max 5180 MHz to 5825 MHz
More informationTypes MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent
More informationEMI/EMC Components - Data Line Filters
The World s Most Advanced Passive Components EMI/EMC Components - Data Line Filters NZ Series Solid Chip Noise Suppressors (N608Z ~ N70Z) Multi-layered Chip Impedance Array Three-Terminal EMI Chip Filters
More informationThin Film Precision Chip Resistor (AR Series)
Features Advanced thin film technology Very tight tolerance down to ±0.01% Extremely low down to ±5PPM/C Wide resistance range 1ohm ~ 3Mega ohm Miniature size 0201 available Thin Film Precision Chip Resistor
More informationGas Discharge Tube (GDT) Data Sheet
Gas Discharge Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance.
More informationRF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
More informationModel 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
More informationPART NUMBER: ACTR MHz-DCC6C-75kHz-v1.1 Frequency: MHz
PART NUMBER: ACTR3028-315MHz-DCC6C-75kHz-v1.1 Frequency: 315.000MHz Features 1-port Resonator Provides reliable, fundamental mode, quartz Frequency stabilization i.e. in transmitters or local oscillators
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More informationLow Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. CERTIFIED AHA 9/29/11 CERTIFIED 2. Type Designation The type designation
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationRF & MICROWAVE CAPACITORS LASER TRIM CERAMIC CHIP CAPACITORS TEMEX. Multilayer ceramic Porcelain - Lasertrim. Applications.
LASER TRIM CERAMIC CHIP CAPACITORS Applications Laser-Trim tuning capacitors are laser adjustable monolithic ceramic surface mount devices for precise functional tuning of R.F. circuits. Laser-Trim have
More informationTop View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationTypes MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications Complies with the EU Directive 2 0 0 2 / 9 5 / E C r e q u i r e m e n t restricting the use of Lead (Pb), Mercury (Hg),
More informationSeptember terminal Filters. For high-speed signal line. MEM-D series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 2013 3-terminal Filters For high-speed signal line MEM-D series MEM1608D 1608[0603 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before
More informationGas Discharge Tube (GDT) Data Sheet
Gas Discharge Tube (GDT) Data Sheet Features Provide ultra-fast response to surge voltage from slow-rising surge of 100V/s to rapid-rising surge of 1KV/μs. Stable breakdown voltage. High insulation resistance.
More informationACTR Features: ACTR DCC6C v1.1
Features: ACTR9028-934.6-DCC6C v1.1 1-port Resonator Provides reliable, fundamental mode, quartz frequency stabilization i.e. in transmitters or local oscillators Surface Mounted Technology (SMT) Lead-free
More informationNew hermetically sealed panel mount filters
New hermetically sealed panel mount filters Introduction Syfer Technology Ltd manufactures quality multilayer ceramic components supplied to a worldwide customer base. Customers utilise Syfer s components
More informationVI TELEFILTER Resonator specification TFR 868D 1/5
VI TELEFILTER Resonator specification TFR 868D 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance * for input: 50Ω for output: 50Ω Characteristics Remark:
More informationMEA1608LE Type. 3-terminal Filters, SMD Array. MEA-LE Series
E M C C o m p o n e n t s September 2015 3-terminal Filters, SMD Array For differential signal line (UHF band terrestrial digital broadcast / DVB-H band compatible) MEA-LE Series MEA1608LE 1608[0603 inch]*
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationPower Transmitter Capacitors UHF/RF High Q Ceramic Capacitors (NP0 TC) 6040C (.600 x.400 ) 6040C (.600 x.400 )
Power Transmitter Capacirs UHF/RF High Q Ceramic Capacirs (NP0 TC) (.600 x.400 ) (.600 x.400 ) Product Features High Q, High RF Current/, High RF Power, Low ESR/ESL, Low Noise, Ultra-Stable Performance.
More informationTypes MCM and MIN SMT Clad RF Capacitors
Multilayer High Power, High Temperature Mica and PTFE Capacitors Specifications actual size Capacitance Range: Voltage Ratings: Temperature Range: Capacitance Tolerance: Dielectric Strength: Insulation
More informationApplications R74 5 F 1100 AA H0 J
Polypropylene Pulse/High Frequency Capacitors R74 125 C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 125 C is constructed of metallized polypropylene
More informationMay Common Mode Filters. For power line. ACM Series. ACM1211 Type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s May 2016 Common Mode Filters For power line ACM Series ACM1211 [4844 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationModel BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
More informationCERAMIC MICROWAVE FILTERS SAW FILTERS. SAF Series
SAW S FEATURES Standard part frequency range (80MHz 2.0GHz) Low passband ripple Linear phase High selectivity APPLICATIONS Cellular Phone: E-AMPS, PCS and GSM, PDC Cordless Phone: CT-1, ISM, DECT Land
More informationHIGH TEMPERATURE 150 C 180 C 200 C 230 C 250 C 350 C
HIGH TEMPERATURE 150 C 180 C 200 C 230 C 250 C 350 C CERAMIC CAPACITORS Catalog 3500 REV. B Presidio Components has been an industry leader in the manufacture of ceramic capacitors since 1980. We are dedicated
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Ultra small: NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant)
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS : NP0/X5R/X7R/Y5V (Pb Free & RoHS compliant) 6.3 V TO 50 V 1 pf to 100 nf Product specification Product specification 2 Surface-Mount Ceramic Multilayer
More informationGENERAL PURPOSE CHIP RESISTORS RC0805 5%, 1%, 0.5%, 0.1% RoHS Compliant & Halogen Free.
GENERAL PURPOSE CHIP RESISTORS RC080 %, 1%, 0.%, 0.1% RoHS Compliant & Halogen Free Product specification - July 26, 2016 V0 SCOPE Chip Resistor Surface Mount RC SERIES 080 This specification describes
More informationCal-Chip Electronics, Incorporated High Voltage Ceramic Chip Capacitors
Cal-Chip Electronics, Incorporated High Voltage Ceramic Chip Capacitors CHV SERIES Introduction Cal-Chip Electronics, Incorporated operates a policy of continuous development for its ranges of Multilayer
More informationSPECIFICATION. Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna
SPECIFICATION Part No. : SDWA.01 Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna Features : High Efficiency/ High Peak Gain 2400 MHz to 2483 MHz - Peak Gain 3.5 dbi 5180 MHz to 5825 MHz - Peak
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationSPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August
More informationApril Common mode filters. For power line. ACP series. ACP3225 type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s April 2018 Common mode filters For power line ACP series ACP3225 [1210 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationVectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
More informationNovember Common Mode Filters. For automobile signal line. ACM series. [0805 inch]* MOST. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s November 2013 Common Mode Filters For automobile signal line ACM series ACM2012 [0805 inch]* MOST * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationRoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification
LFA0805 SERIES (LC Filter Array) 1. Scope This specification is applicable to LC Filter Array series product. The customer designed part number drawing take precedence over this specification. The LC Filter
More informationCHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
More informationVectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
More informationJuly Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line, general signal line ACM series ACM202 ACM2520 [0805 inch]* [008 inch] * Dimensions Code JIS[EIA] (2/) REMINDERS
More information1111C/P (.110 x.110 )
Traditional High Q (>10,000) Low ESR Capacits Product Features High Q, High Power, Low ESR/ESL, Low Noise, High Self-Resonance, Ultra-Stable Perfmance. Product Application Typical Functional Applications:
More informationACM2012H-T05. Common Mode Filters. ACM-H Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2017 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) ACM-H Series ACM2012H-T05 [0805 inch]* * Dimensions Code JIS[EIA]
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationDATA SHEET Thick Film Chip Resistor RC (RoHS Compliant & Halogen Free) YAGEO CORPORATION
DATA SHEET Thick Film Chip Resistor RC 01005 (RoHS Compliant & Halogen Free) YAGEO CORPORATION 350, Zhongzheng Rd., Dashe Shiang, Kaohsiung 815, Taiwan Tel: 88-7-351-4117 Fax: 88-7-351-2075 Headquarters:
More information