ATC 1206 LPF Series High Performance SMT Thin Film Low Pass Filter
|
|
- Muriel Leonard
- 6 years ago
- Views:
Transcription
1 ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC 126 LPF Series High Performance SMT Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External Matching Low : 8 W Low Profile SMT EIA Package Pb Free / RoHS Compliant ATC s 126 HP LPF Series High Performance Thin Film SMT Low Pass Filters offer superb high frequency performance in a low profile EIA style package. The 126 HP LPF Series offers sharp cut-off response, excellent stopband rejection, low passband insertion loss with 5 ohm input and output impedance characteristics. Their superb performance makes them well suited for the most demanding wireless frequency applications. The LPF 126 filter Series is fully tested to meet or exceed electrical, environmental and mechanical specifications. They are supplied in tape and reel making them fully compatible with high speed automated pick-and-place manufacturing. Environmental Tests: Static Humidity: 85 85% RH for 16 hours Applications: Wireless Communications (Cellular and PCS) Wireless LANs Public Safety Radio (P25) LTE ISM Global Navigation Satellite Systems (GNSS) Part Number Passband (MHz) LPF126HP7STT to 7 LPF126HP86STT to 86 LPF126HP32STT to 32 LPF126HP35STT to 35 LPF126HP36STT to 36 LPF126HP38STT to 38 Life Test: 125 for 4 hours 1 ATC # Rev. B, 4/18
2 ATC 126 HIGH PERFORMANCE LOW PASS FILTER Dimensions Size (EIA) Length (L) Width (W) Thickness (T) A inches (mm) B ±.4 (3.7 ±.1).63 ±.4 (1.6 ±.1).34 ±.4 (.86 ±.1).28 ±.1 (.71 ±.25).14 ±.6 (.36 ±.15) Mechanical Configurations Terminals and Orientation in Tape (Top View) L B W T Orientation Marking IN A GND OUT GND A Recommended Pad Layout Dimensions Dimensions inches (mm) K F.67 ±.2 (1.7 ±.5) ØD G.31 ±.2 (.79 ±.5) K.75 ±.4 (1.91 ±.1) M.21 ±.1 (.53 ±.25) R F S N P.76 ±.2 (1.93 ±.5).8 ±.2 (.2 ±.5) G R.71 ±.2 (1.8 ±.4) M P N S D.8 ±.2 (.2 ±.4).24 ±.4 (.61 ±.1) 2
3 ATC 126 HIGH PERFORMANCE LOW PASS FILTER Electrical Characteristics LPF126HP7STT 7 MHz 28 MHz -3 db.8 db -2 db 5 ohms Operating Temperature ºC to + 85 ºC LPF126HP86STT 86 MHz 34 MHz -3 db.85 db -18 db 5 ohms Operating Temperature ºC to + 85 ºC LPF126HP32STT 32 MHz 1 GHz -25 db.85 db -2 db 5 ohms Operating Temperature ºC to + 85 ºC LPF126HP35STT 35 MHz 11 GHz -15 db.7 db -18 db 5 ohms Operating Temperature ºC to + 85 ºC LPF126HP36STT 36 MHz 1.8 GHz -25 db.7 db -25 db 5 ohms Operating Temperature ºC to + 85 ºC LPF126HP38STT 38 MHz 1 GHz -33 db.8 db -2 db 5 ohms Operating Temperature ºC to + 85 ºC ATC Part Number Code LPF 126 HP 7 S T T Low Pass Filter Case Size: 4 digits High Performance Passband (MHz) Packaging T = Tape and Reel, 7 Reel std. Quantity: 1, 5 and 3 pc. std. Termination T = RoHS Compliant Tin over Nickel Barrier termination Style: S = SMT The above part number refers to a Low Pass Filter, (EIA case size 126), High Performance, Passband DC to 7 MHz, SMT (S) Style, Tin Termination ATC accepts orders for our parts using designations with or without the ATC prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the ATC prefix are interchangeable to parts referenced without the ATC prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. For additional information and catalogs contact your ATC representative or call direct at Consult factory for additional performance data. 3
4 ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC LPF126HP7S Passband to 7 MHz ATC LPF126HP86S Passband to 86 MHz
5 ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC LPF126HP32S Passband to 32 MHz ATC LPF126HP35S Passband to 35 MHz
6 ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC LPF126HP36S Passband to 36 MHz ATC LPF126HP38S Passband to 38 MHz Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #1-992). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC s website at Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. 216 American Technical Ceramics Corp. All Rights Reserved. ATC # , Rev. A, 3/18 6
ATC 1206 LPF Series High Performance LGA Thin Film Low Pass Filter
ATC 126 LPF Series High Performance LGA Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External Matching Low Power Rating: 12 W Low Profile
More informationATC 0603 LPF Series LGA Thin Film Low Pass Filter
ATC 63 LPF SERIES LGA THIN FILM LOW PASS FILTER ATC 63 LPF Series LGA Thin Film Low Pass Filter Features: 63 LGA Package Frequency Range: DC to 565 MHz Characteristic Impedance: 5Ω Low Insertion Loss:.35
More informationATC HPF Series Multilayer Organic High Pass Filters
ATC HPF Series Multilayer Organic High Pass Filters Features: Sharp Cut-off Response Low Insertion Loss Excellent Stopband Rejection Characteristic Impedance: 5Ω Operating Temperature: -55 C to +85 C Low
More informationATC BPF Series Multilayer Organic Band Pass Filters
ATC BPF SERIES MULTILAYER ORGANIC BAND PASS FILTERS ATC BPF Series Multilayer Organic Band Pass Filters Features: Sharp Roll-Off Characteristics Low Insertion Loss Excellent Stopband Rejection Characteristic
More informationModel BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationModel BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
More informationModel BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationModel C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationModel BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationTypical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
More informationModel C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationModel C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
More informationATC 800 R Series NPO Ceramic, High RF Power Lowest ESR Multilayer Capacitors
AC 800 R Series NPO Ceramic, High RF Power owest ESR Multilayer Capacitors Case R Size (.070 x.090 ) Rugged, reliable NPO dielectric Optimized for highest self resonant frequency AC s 800 R Series offers
More informationOperating Temperature -40 C to +85 C Storage Temperature* -55 C to +100 C RF Power Input** 0.5W at 25 C
INSERTION LOSS (db) Ceramic Bandpass Filter 50Ω Applications Harmonic Rejection Transmitters / Receivers WiFi / WLAN 5150 to 5990 MHz Features Low loss
More informationVSWR (:1) Frequency (MHz)
INSERTION LOSS (db) Ceramic Bandpass Filter 50Ω Applications Harmonic Rejection Transmitters / receivers PCS 1893 to 1920 MHz Features Small size (0.126 x0.063 x0.051 ) Temperature stable Hermetically
More informationFeatures Excellent VSWR, 1.1:1 passband Small size Temperature stable LTCC construction
Ceramic Bandpass Filter 5Ω Maximum Ratings Operating Temperature Storage Temperature 15 to 16 MHz -55 o C to 1 o C -55 o C to 1 o C RF Power Input* 1.5W at 25 o C *Passband rating, derate linearly to.25w
More informationStop Band Rejection Loss F4 - F db F db 1
Ceramic Low Pass Filter 50Ω Applications DC 1 to 990 MHz Features Low loss, 0.4 db typ. Small size 0805 (2.0 x 1.25 mm) Temperature stable LTCC construction Harmonic Rejection VHF/UHF transmitters / receivers
More informationThin-Film Directional Couplers
DB6N 9 Couplers GENERAL DESCRIPTION RFAP TECHNOLOGY The DB6N 9 Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and
More informationInsertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
More informationModel 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
More informationTop View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationInsertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
More informationDATASHEET. It needs tuning process for customer s device. AMOTECH
Document Datasheet Type Dielectric Chip Antenna Application 1575.42 & 1592~1610MHz Part No. AMAN1003015ST03 Revision 1.0 DATASHEET Application GPS(1575.42 MHz) & Glonass (1592~1610 MHz) Features PIFA Structure
More informationTop View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationCR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
More informationFeatures wide bandwidth 10 to 3000 MHz balanced transmission line excellent return loss aqueous washable patent pending
Surface Mount top hat RF Transformer 50Ω 10 to 3000 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.4W DC Current 30mA Permanent damage may occur if
More informationRF Transformer TCM2-672X+ Surface Mount. 50Ω 1700 to 6700 MHz
Surface Mount top hat RF Transformer 50Ω 1700 to 6700 MHz The Big Deal Wideband, 1700 to 6700 MHz Low insertion loss, 1.1 db Flat insertion loss, ±0.4 db typ. Good input return loss, 12 to 31 db typ. Low
More informationPreliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units
Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband
More informationModel DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
More information2 Way-0 Power Splitter/Combiner GP2S1+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 500 to 2500 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
More information2 Way-0 Power Splitter/Combiner GP2Y+ Typical Performance Data
MMIC Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 1600 to 3300 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -65 C to 150 C Power Input (as a splitter) 1.5W max. Internal
More informationData Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
More informationSurface Mount Ceramic Chip Antennas for 2.4 GHz
Surface Mount Ceramic Chip Antennas for 2.4 GHz chip antenna The VJ5106W240 series are small form-factor, high-performance chip-antennas designed to be used in wireless, bluetooth and ISM band 2.4 GHz.
More informationBandpass Filter BPF-E16+ Surface Mount. The Big Deal Low isertion loss (1 db typical) Good VSWR (1.4:1 typical) High rejection Fast roll-off
Surface Mount Bandpass Filter 5Ω 2 to 3 MHz The Big Deal Low isertion loss (1 db typical) Good VSWR (1.4:1 typical) High rejection Fast roll-off CASE STYLE: HR1176 Product Overview The is a 5Ω band pass
More informationGHz BAW Filter
Applications WiFi/ ISM notch filter to enable coexistence between WiMAX/LTE/TD-LTE & WiFi/BT/ISM radios Applicable passbands: 2.6 GHz WiMAX/LTE, 2.3 GHz WiMAX/LTE, LTE Bands 7 & 38, TD-LTE Band 40, WCS,
More information1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C
SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25
More informationAMCA R450G-S1F-T3 Pb
FEATURES APPLICATIONS 2450MHz, bandwidth 90MHz Small size - 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) Gain 0.5dBi (Peak) / -1dBi (Average) VSWR
More informationREFLECTIONLESS FILTERS
NEW! Two & Three Section Models MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal High Stopband rejection, up to 50 db Patented design terminates stopband signals Pass band cut-off up to 11 GHz
More informationMMP PIN Diode Data Sheet Rev A
Rev A Features Low Series Resistance for Low Insertion Loss and High Isolation: R S < 1.2 Ω Low Junction Capacitance for Low Insertion Loss and High Isolation: C J < 0.1 pf Low Thermal Resistance: < 45
More informationDifferential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
More informationREFLECTIONLESS FILTERS
NEW! Two & Three Section Models MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal High Stopband rejection, up to 50 db Patented design terminates stopband signals Pass band cut-off up to 11 GHz
More informationREFLECTIONLESS FILTERS
NEW! Two & Three Section Models MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal High Stopband rejection, up to 50 db Patented design terminates stopband signals Pass band cut-off up to 11 GHz
More informationModel X3DC18E2S Rev B
b Doherty Combiner Description The X3DC18E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC18E2S is designed particularly
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC 00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (.0" x.0") 0. pf to 000 pf High Q Ultra-Stable Performance ow ESR/ES High Self-Resonance ow Noise Established Reliability
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
More informationPower Splitter/Combiner
Surface Mount Power Splitter/Combiner 2 Way-0 50Ω 950 to 1300 MHz + Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Power Input (as a splitter) 10W max. Internal
More informationModel X3DC07E2S. Doherty Combiner. Mechanical Outline
b Model X3DC7E2S Doherty Combiner Description The X3DC7E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC7E2S is designed
More informationWideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
More informationSPECIFICATION. : MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI
SPECIFICATION Part No. : HLA.01 Product Name : 5150-5900 MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI Feature : 3.2mm *1.6mm * 0.5mm Low profile Peak gain 2.1dBi 65%+ Efficiency Typical Compact Size RoHS
More informationATC 200 B Series BX Ceramic Multilayer Capacitors
AC 200 Series X Ceramic Multilayer Capacitors Case Size Capacitance Range (.110" x.110") 5000 pf to 0.1 µf ow ESR/ES Mid-K Rugged Construction High Reliability Extended VDC Available AC, the industry leader,
More informationFeatures wideband, DC to 2500 MHz excellent VSWR, through entire band miniature size, SOT143 package aqueous washable ATTENUATION. (db) Flatness, Max.
Miniature Surface Mount Fixed Attenuator 50Ω 0.5W 7dB DC to 2500 MHz Maximum Ratings Operating Temperature -55 C to 85 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits
More information2.4 GHz ISM Band Working Frequency
RFBLN 2012 (0805) Series RoHS Compliance MULTILAYER CERAMIC BALUN TRANSFORMER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBLN2012090A1T *Contents in this sheet are subject to change
More informationBroadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX in a single amplifier.
Flat Gain, Ultra-Wideband Monolithic Amplifier 50Ω 0.01 to 12 GHz The Big Deal Ultra broadband performance Excellent Gain Flatness through 8 GHz Broadband without external matching components CASE STYLE:
More informationProducts. Dielectric Resonators. Description: Specifications: Attenuation:
Dielectric Resonators Products Description: K&L s Dielectric Resonator Bandpass Filters are available in standard packages with a basic Chebychev design. Connectors available are SMA and RF pins. Through
More informationAnaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
More informationRF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (.0 x.0 ) 0. pf to 0 pf High Q ow ESR/ES ow Noise Extended VDC up to 500 VDC Ultra-Stable Performance High Self-Resonance
More informationREFLECTIONLESS FILTERS
NEW! Two & Three Section Models MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal High Stopband rejection, up to 50 db Patented design terminates stopband signals Pass band cut-off up to 11 GHz
More informationApril Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s April 2014 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM1608G [0202 inch]* [0603 inch] * Dimensions Code JIS[EIA]
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationApplications impedance matching balanced to unbalanced transformation push-pull amplifier. FREQUENCY (MHz) 1 db MHz
Surface Mount RF Transformer 50Ω 3 to 300 MHz Maximum Ratings Operating Temperature -20 C to 85 C Storage Temperature -55 C to 100 C RF Power 0.25W DC Current Pin Connections 30mA Permanent damage may
More informationFeatures miniature package MCLP 3x3 mm specified to 8000 MHz, useable to MHz excellent VSWR, 1:15:1 typ. (db) Flatness
Miniature Plastic Fixed Attenuator 50Ω 0.5W 2dB DC to 8000 MHz Maximum Ratings Operating Temperature -45 C to 85 C Storage Temperature -55 C to 100 C Permanent damage may occur if any of these limits are
More information= 35 ma (Typ.) Frequency (GHz)
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier SGA-486(Z) DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free (Z Part Number) Package: SOT-86 Product Description The SGA-486
More informationFrequency (GHz) 5000 MHz
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier SGA-86(Z) DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free (Z Part Number) Package: SOT-86 Product Description The SGA-86
More informationTCM0403S Type. Common Mode Filters. TCM-S Series. For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.
E M C C o m p o n e n t s May 2016 Common Mode Filters For ultra high-speed differential signal line (HDMI, DVI, DisplayPort, USB3.0, etc.) TCM-S Series TCM0403S [0201 inch]* * Dimensions Code JIS[EIA]
More informationData Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
More informationSPDT RF Switch Absorptive RF Switch with internal driver. Single Supply Voltage, +3V to +5V
Absorptive Switch with internal driver. Single Supply Voltage, +3V to +5V 50Ω 500-6000 MHz Product Features High Isolation, 65 typ. at 1 GHz Low insertion loss, 1.0 typ. at 1 GHz High IP3, 50 m typ. at
More informationATC 800 E Series NPO Ceramic High RF Power Multilayer Capacitors
AC 800 Series NPO Ceramic High RF Power Multilayer Capacitors Case Size Capacitance Range: (" x ") 3.3 pf to 500 pf High Q Ultra-Stable Performance Ultra ow SR High RF Current/Voltage High RF Power High
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC 00 Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 000 pf High Q Ultra-Stable Performance ow ESR/ES High Self-Resonance ow Noise Established Reliability
More informationBroadband covering primary wireless communications bands: Cellular, PCS, LTE, WiMAX
Ultra Linear Low Noise Monolithic Amplifier 50Ω 0.05 to 4 GHz The Big Deal Ultra High IP3 Broadband High Dynamic Range May be used as a replacement for RFMD SPF-5189Z a,b SOT-89 PACKAGE Product Overview
More informationREFLECTIONLESS FILTERS
NEW! Two & Three Section Models MMIC REFLECTIONLESS FILTERS 50Ω DC to 21 GHz The Big Deal High Stopband rejection, up to 50 db Patented design terminates stopband signals Pass band cut-off up to 11 GHz
More informationWeii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification
Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiant Product Specification 1. Features: 2.4GHz applications Bluetooth, WiFi, Zigbee, ISM. Ultra small ceramic chip solution. High Efficiency. SMD mounted.
More informationSGA-6489 SGA-6489Z Pb
Product Description The SGA-689 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring micron emitters provides high F T and excellent thermal perfomance. The heterojunction
More informationSeptember Chip Beads. For signal line. MMZ-V series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 213 Chip Beads For signal line MMZ-V series MMZ15-V 15[42 inch]* * Dimensions Code JIS[EIA] (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be
More informationDual Band Monopole Ceramic Chip Antenna
Features - Low profile - Compact size W x L x H (10 x 3.2 x 2 mm) - Low weight (240 mg) - Lead free materials - Fully SMD compatible - Lead free soldering compatible - Tape and reel packing - RoHS Compliant
More informationPAGE 1/6 ISSUE Jul SERIES Micro-SPDT PART NUMBER R516 XXX 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE Jul-24-2017 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT
More information"High Frequency Ceramic Solutions"
.4GHz Mini Patch Antenna, Circular Polarization, SMD P/N 440AT6A0085 Detail Specification: 6/7/018 Page 1 of 5 Let us help you with the antenna design, optimization, and tuning! General Specifications
More informationSPECIFICATION. Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna
SPECIFICATION Part No. : SDWA.01 Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna Features : High Efficiency/ High Peak Gain 2400 MHz to 2483 MHz - Peak Gain 4.4 dbi max 5180 MHz to 5825 MHz
More informationGHz LOW NOISE AMPLIFIER WHM AE 1
2.2 2.7 GHz LOW NOISE AMPLIFIER WHM25-3020AE 1 REV B WHM25-3020AE LNA is a low noise figure, wideband, and low power SMT packaged amplifiers with unconditional stable design. The amplifier offers typical
More informationMultilayer Organic (MLO TM )
HOW TO ORDER DP 03 C 1580 Type Size Design Frequency (MHz) QUALITY INSPECTION 1 6 1 6 1 6 2 5 2 5 2 5 3 4 3 4 3 4 MLO TM TECHNOLOGY Finished parts are 100% tested for electrical parameters and visual characteristics.
More informationSPECIFICATION. Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna
SPECIFICATION Part No. : SDWA.01 Product Name : Dual-Band 2.4/5GHz Wi-Fi Ceramic SMD Antenna Features : High Efficiency/ High Peak Gain 2400 MHz to 2483 MHz - Peak Gain 3.5 dbi 5180 MHz to 5825 MHz - Peak
More informationElectrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (.0" x.0") 0. pf to 0 pf High Q Ultra-Stable Performance ow ESR/ES High Self-Resonance ow Noise Established Reliability (QP)
More informationVT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (." x.") 0. pf to 0 pf High Q Ultra-Stable Performance ow ESR/ES High Self-Resonance ow Noise Established Reliability (QP)
More informationSchematic and Application Circuit RF COMMON. DUT RF Section. Internal CMOS Driver. Control VDD
Ceramic, Hermetic SPDT RF Switch Absorptive RF Switch with internal driver. Single Supply Voltage, +3V to +5V Product Features Wide bandwidth, 500 to 6000 MHz High Isolation, 65 typ. at 1 GHz Low insertion
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationSeptember terminal Filters. For signal line. MEM Series. MEM1608P Type. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s September 2015 3-terminal Filters For signal line MEM Series MEM1608P 1608[0603 inch]* * Dimensions Code JIS[EIA] (2/7) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationPLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
More informationMonolithic Amplifier LHA-1H+ Ultra High Dynamic Range to 6 GHz
Ultra High Dynamic Range Monolithic Amplifier 50Ω 0.05 to 6 GHz The Big Deal Ultra High IP3 Broadband High Dynamic Range without external Matching Components MCLP PACKAGE Product Overview (RoHS compliant)
More informationVT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
More informationMonolithic Amplifier MNA-6W+ High Directivity. 0.5 to 5.5 GHz
High Directivity Monolithic Amplifier 50Ω 0.5 to 5.5 GHz The Big Deal Integrated matching, DC Blocks and bias circuits Excellent Active Directivity Operates over 2.8-5V CASE STYLE: DQ849 Product Overview
More information