ABLE. VRL Series. Planetary Servo Reducers. New Performance Leader
|
|
|
- Bruce Stevenson
- 6 years ago
- Views:
Transcription
1 VRL Series ABLE Planetary Servo Reducers ew Performance Leader Industry Standard Mounting Dimensions Thread-in Mounting Style Best-In-Class Backlash ( 5 arc-min) Ships in hours Assembled in the USA
2 VRL DIMESIOS Output Shaft U ST Tapping ØS(j6) W T 4-LZ QK LF ØLA LR Q L AQ ØLC ØLB(g6) ØSS SS LA LB LC L LR LF LZ Q QK AQ S T W U ST M M M M M M M M M M M M ote 1: Depending on installed servo motor, the L dimension varies slightly. ote 2: For other input shaft dimensions, Bushing is installed into Input Shaft. ote 3: reduction 3-10:1, reduction :1. ote 4: Contact Shimpo for dimensional data for 0 frame sizes. ote 5: Dimensions in mm. ote 6: Also available in right angle.
3 VRL SPECIFICATIOS ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash arc-min ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load kg Unit Life hrs Protection IP IP IP IP IP IP Contact us fo Speed s 3,4,5,6,7,,9,10:1 3,4,5,6,7 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25,,30,,40, ote: Contact Shimpo for specification data for 0 frame sizes ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load arc-min kg Unit Life hrs Protection IP IP IP IP IP IP or the details Speed s 3,4,5,6,7,,9,10:1 3,4,5,6,7 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25,,30,,40, ote: Contact Shimpo for specification data for 0 frame sizes.
4 ABLE Planetary Servo Reducers ew Performance Leader Industry Standard Mounting Dimensions Thru-bolt Mounting Style Best-In-Class Backlash ( 3 arc-min) Ships in hours Assembled in the USA
5 VRB DIMESIOS Output Shaft U ST Tapping W ØS(j6) LC T 4-ØLZ ØLA QK LR Q LF LG L AQ ØLB(g6) ØSS(F7) SS LA LB LC L LR LF LG LZ Q QK AQ S T W U ST M M M M M M20 ote 1: Depending on installed servo motor, the L dimension varies slightly. ote 2: For other input shaft dimensions, Bushing is installed into Input Shaft. ote 3: reduction 3-10:1, reduction :1. ote 4: Contact Shimpo for dimensional data for 042 and 240 frame sizes. ote 5: Dimensions in mm. ote 6: Also available in right angle.
6 VRB SPECIFICATIOS ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash arc-min ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load kg Unit Life hrs Protection IP IP IP IP IP IP Contact us fo Speed s 3,4,5,6,7,,9,10:1 3,4,5,6,7 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25,,30,,40, ote: Contact Shimpo for dimensional data for 042 and 240 frame sizes ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load arc-min kg Unit Life hrs Protection IP IP IP IP IP IP or the details Speed s 3,4,5,6,7,,9,10:1 3,4,5,6,7 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25,,30,,40, ote: Contact Shimpo for dimensional data for 042 and 240 frame sizes.
7 VRS Series ABLE Planetary Servo Reducers ew Performance Leader Industry Standard Mounting Dimensions Thru-bolt Mounting Style Best-In-Class Backlash ( 3 arc-min) Highest Radial and Axial Load Ratings Ships in hours Assembled in the USA
8 VRS DIMESIOS ST Tapping Output Shaft U W ØS(j6) LC T LR Q LF LG L AQ 4-ØLZ QK ØLA ØLB(g6) ØSS(F7) SS LA LB LC L LR LF LG LZ Q QK AQ S T W U ST M M M M M M20 M20 ote 1: Depending on installed servo motor, the L dimension varies slightly. ote 2: For other input shaft dimensions, bushing is installed into input shaft. ote 3: reduction 3-10:1, reduction :1. ote 4: Contact Shimpo for dimensional data for 042 frame sizes. ote 5: Dimensions in mm. ote 6: Also available in right angle.
9 VRS SPECIFICATIOS ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash arc-min ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load kg Unit Life hrs Protection IP IP IP IP IP IP IP IP Speed s 3,4,5,6,7,,9,10:1 3,4,5,6,7,,9,10:1 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25,,30,,40,45,,60,70, ote: Contact Shimpo for specification data for 042 frame sizes ominal Output Torque Maximum Output Torque Emergency Stop Torque Backlash ominal Input Speed Maximum Input Speed Allowable Radial Load Allowable Thrust Load arc-min kg Unit Life hrs Protection IP IP IP IP IP IP Speed s 3,4,5,6,7,,9,10:1 15,16,20,25,,30,,40,45,,60,70,0,90,100:1 15,16,20,25, ote: Contact Shimpo for specification data for 042 frame sizes.
SGMPH Gearmotors - With Incremental Encoder
- With Incremental Encoder Rated Output : 100W, 200W, 400W, 750W, 1500W Design Features 1. Compact Fits in limited mounting space 2. Torque 40.9 to 3540in lb peak torque Cost-effective solution for low
SGMJV. Rotary Servomotors SGMJV - 01 A D A 2 1. Model Designations. 2Without Gears. 1st+2nd digits. 3rd digit. 5th digit. 6th digit.
Rotary s Designations 2Without s - D 2 Series st+2nd s rd 4th th th 7th st+2nd s Rated Output th Design Revision Order 7th Options Code W W C2 W 2 2 W 4 4 W W 8 7 W rd Power Supply Voltage Code th Code
5th digit. 4th digit. 6th digit. Design Revision Order. Shaft End. Code Specifications
Rotary s Designations 2Without Gears - 0 D 2 Series st+2nd digits 3rd digit 4th digit 5th digit 6th digit 7th digit st+2nd digits Rated Output 5th digit Design Revision Order 7th digit Options Code 5 50
Precision Geared dc servo motors. HPE M series
Precision ed dc servo motors HPE M Features Precision servo motors with optional dc tachogenerator & or encoder for digital control Choice of models from to 9 mm diameter Up to 2, counts per rev. resolution
Ultra-High Precision Indexer
Ultra-High Precision Indexer STR-Series Reducer Installa on Manual Contents １ STR exploded view...2 ２ Reducer installation... 2-6 ３ Reducer removal... 7 ４ Screws... 8 ５ Tightening torque... 9 1 STR exploded
4th digit. 5th digit. 6th digit. Code Specifications. Design Revision Order. Code Specifications. Standard. Code Specifications
Rotary s Model Designations - D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output Code Specifications. kw. kw. kw. kw 3 3. kw. kw. kw 7 7. kw : vailable only
BRUSHLESS DC geared motors
0 Watts with Ø 6 mm planetary gearbox Concentric output shaft Ideal for high reduction ratios Ideal for high torque applications High efficiency Reversible Output speed Available torque stage stages stages
56 mm sq. (2.20 inch sq.)
56 mm sq. (. inch sq.) 1.8 /step RoHS Unipolar winding, Lead wire type Bipolar winding, Lead wire type p. 7 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
3. HIWIN rotary tables TMS
CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 ()1388 7784 Fax: +44 ()1388 7788 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk 3. HIWIN rotary tables TMS 3.1 Characteristics
IP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
SmartStep servo motors
HARGE R7M-A@, R7M-AP@ SmartStep servo motors The smart alternative to stepper motors SmartStep motors can be controlled by SmartStep drive and XtraDrive ylindrical and flat servo motor types are available
14 mm sq inch sq.
Allowable Load Internal Wiring Rotation Direction P.56 General Specifications P.57 Motor Dimensions P.69 to 74 14 mm sq..55 inch sq. 1.8 /step winding Lead wire type winding Lead wire type Model number
.500. location of stopscrews for Drill thru & c-bore for #10 S.H.C.S. (2) .60. #10-32 air connection (2).189 dia (2)
A -1 otary rive 0-180 ully Adjustable eatures Angle of rotation adjusted with built in stop screws with fine threads top screws are compatible with sensing switches esigned for production rates and long
BRUSHLESS DC MOTOR FAMILY
BRUSHLESS DC MOTOR FAMILY Series NT HST Geared Brushless DC Permanent Magnet Motor The NT HST is designed to provide: Fast dynamic response High power density Compact package size Long life ball bearing
Thomas Disc Couplings Installation and Maintenance Type 54 RDG Sizes (Page 1 of 6)
Thomas Disc ouplings Installation and Maintenance Type 54 RDG Sizes 125-925 (Page 1 of 6) ATEX In order for this coupling to meet the ATEX requirements, it is mandatory to precisely follow these installation
60 mm sq. (2.36 inch sq.)
6 mm sq. (.36 inch sq.) 1.8 /step RoHS Unipolar winding, Connector type Unipolar winding, Dimensions for attaching NEMA3 are interchangeable (47.14 mm-pitch) Bipolar winding, Connector type p. 76 Bipolar
PRECISION Lead Screw Assemblies
PRECISION Lead Screw Assemblies THREAD GRINDING COMPANY Precision Lead Screw Assemblies Universal Thread Grinding offers a comprehensive selection of standard precision lead screw assemblies. Installed
DA 20 Technical Specification
1/18 DA 2 DA 2-6-255 DA 2-12-2515 DA 2-3-253 2/18 Content 1. General Description... 3 2. Operating Data... 4 2.1. Operating Data 6V-Versions... 4 2.2. Operating Data 12V-Version... 5 2.3. Operating Data
GEA G, Size 1 Brushless Servo-Gearmotors
GEA G, Size Brushless Servo-Gearmotors DESCRIPTION The Moog GEA G Series Gear Motor is based on the high dynamic Moog AC Servomotors and a technologically improved single stage planetary gear box. The
Harmonic Drive actuator
Harmonic Drive actuator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l The RSF series servo actuator combines a high performance brushless servomotor with a high accuracy Harmonic Drive gearhead
Sanyo Denki PY Servo System
Sanyo Denki PY Servo System Installation and Operation Manual Tel: +86 10 51298818 Fax: +86 10 61746631 China@sanyodenki.net SANYO DENKI Table of Contents TABLE OF CONTENTS... 2 INTRODUCTION... 5 About
Sigma-5: the 5-star servo drive
Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS
Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information
This manual is to be given to the end user Installation and maintenance
3831-03.2005 / a 37 en This manual is to be given to the end user HF HU DH7 T. Nj7 IE E XF XF BF 4 x S3 D1 D2 4 x S3 RU x R XA XB XA XB VA VB V HG R1 nxs2/m2 VF VU RB 4 x S4 Installation and maintenance
ART50/100 Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and small footprint. Ultra-fine resolution
/ Series Rotary Stages /100 Series Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and small footprint Ultra-fine resolution Integral brushless servomotor or microstepping motor Optional aperture
JR12 Jam Nut Mount Optical Encoder
Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions
100/200V Single-phase Sigma II Servo Systems
Flat Series - With Incremental / bsolute Encoder Output: 100W, 200W, 400W, 750W, 1500W For dditional Information Ratings & Specifications Speed/ Curves Dimensions Selection/Ordering Information SGDH Ratings
AD Series. AC Servo Drive. For the highest requirements in performance and precision
Range of Performance.1 kw 7 kw (.32 33.4 ) Drastically Reduced Motor Cogging Torque Advanced Drive Technology Autotuning Built-in Programmable Sequence with max. 512 program steps and 1 positions Plug
Sigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements
Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of
New Servo Concept: Junma
New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter
SERVO INDEXING AT MECHANICAL INDEXER PRICES
SERVO INDEXING AT MECHANICAL INDEXER PRICES 1 Servo indexing at mechanical indexer prices The EZ INDEXER servo indexers are high precision indexing machines designed to be low cost without sacrificing
Screw jack options. When stainless steel screws are specified, we can supply the flange end and rod end in stainless if requested.
Screw jack options Raised cover CA Available for MA Series screw jacks, the raised covers with toleranced dimensions act as a centring register, also allow the fitting of bronze guide bushes, protective
Series. integrated Control Motor LINEAR SOLUTIONS MADE EASY
integrated ontrol Motor ELETROMATE LINEAR SOLUTIONS MADE EASY A What is a? The SmartActuator is a controller, drive and motor integrated with an actuator for an all-in-one solution. Tolomatic has over
QR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
RKF Series. Total Motion Control. Harmonic Drive actuator
RKF Series Total Motion Control Harmonic Drive actuator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l RKF Series The RKF series is compact and includes high-torque AC servo actuators with
SD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions
AC Spindle Motor Drives with Power Regeneration, AC Servo Drives SD Series Speed Reference with Analog Voltage Expanded Functions Power Regeneration Converter Model CACP-JU SERVOPACK Model CACR-JU Spindle
CNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
/ a. This manual is to be given to the end user. nxs/m. Nh6 OXZ. Pjl Servo gearboxes. Installation and maintenance
P Nh6 D H en 36 E W R RU This manual is to be given to the end user OXZ EX EY T nxs/m GA AD F a HB Installation and maintenance LEROY-SOMER INSTALLATION AND MAINTENANCE NOTE - CAUTION - CONTENTS NOTE LEROY-SOMER
TRD-N/NH Series Incremental Encoders
/N Series Encoders TRD-K TRD-K A TRD-GK TRD-J /N TRD-2E TRD-S/S Features Shaft and ollow Shaft type are available. Compact body with 5mm diameter and 35mm depth. Wide range of resolution from 1 to 2,5P/R.
Servo Motors B-9. Overview. Tuning-Free NX. Tuning-Free NX Series. Servo Motors. Accessories. Page. NX Series B-10 B-9
Servo Motors B-9 Overview NX Servo Motors Accessories Page B-1 B-9 B-1 Servo Motor and Driver Package Technical reference Page H-1 Regulations & Standards Page I-2 For detailed
QR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
Data Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
Servo System Products
Servo System Products Table of Contents Product Overview...4-10 100/200V Single-phase Servo System I2TMH Servo System...11-24 I2TMPH Servo System...25-42 I2TMPH Gearmotor System...43-52 I2TDH Servo mplifier...93-122
AC SERVO DRIVES SERIES. Rotary Servomotors. Certified for ISO9001 and ISO14001
C SERVO DRIVES SERIES Rotary Servomotors Certified for ISO91 and ISO141 JQ-422 JQ-EM22 CONTENTS Rotary Servomotors SGMMV (ow Inertia, Ultra-small Size) 4 SGM7J (Medium Inertia, High-speed) 14 SGM7 (ow
3-SPEED TRANSMISSION TEARDOWN GUIDE
3-SPEED TRANSMISSION TEARDOWN GUIDE Toro Service Training Material 3-Speed Transmission Teardown This is an exercise to take apart a 3-Speed transmission just as you would if one fails on a customer s
3Specifications CHAPTER THREE IN THIS CHAPTER
CHAPTER THREE 3Specifications IN THIS CHAPTER Drive Specifications SM and NeoMetric Motor Specifications SM and NeoMetric Motor / Curves SM and NeoMetric Motor Dimensions SM and NeoMetric Encoder Specifications
Stepper Motors WE CREATE MOTION
WE CREATE MOTIO PRECIstep Technology EW Page FDM 6 Two Phase with Disc Magnet, AM 8 Two Phase,6 AM Two Phase,6 ADM S Two Phase with Disc Magnet, 6 7 AM Two Phase 6 8 AM Two Phase AM -R Two Phase WE CREATE
For instrumentation For industrial For milling For ultra precision machine tools
For instrumentation For industrial For milling For ultra precision machine tools For motor controls Machine Tools For Machine Tools For Press Machines For small wattage motor,serial Data transfer For Medium
Installing CNC Stepper Motor Mounts on a Sherline Mill
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Mill upgrade kit part numbers: P/N 6700/6710 Model 5000/5400 mills P/N 6705/6715 Model 2000 mill P/N 6740/6745
4. DOUBLE ECCENTRICS 5. WORM DRIVE SHAFT
Quality Manufacturing Processes 's GD5C2 has higher accuracy, more spindle clearance and more thrust and radial load. All rotary products are manufactured in Elmira, New York to strict specifications.
introduction to Precision lead screws & Miniature Ball Screws
introduction to Precision lead screws & Miniature Ball Screws Dynetics - your partner in movement Dynetics represents leading manufacturers with great technical expertise in micro-motor drive solutions,
Low Cost, Small Package, 120VAC Microstepping Drive
Catalog 8-4/USA E-AC Low Cost, Small Package, 12VAC Microstepping Drive Compumotor's new E-AC is a low-cost, high-performance, high-reliability microstepping drive in a small package. The design of the
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
L25 Incremental Optical Encoder
L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder
TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
Electric Actuator MULTI-TURN. ITM Series 0180 / 0450 / 0750 / 1800 / 3000
Electric Actuator MULTI-TURN Series 0180 / 0450 / 0750 / 1800 / 3000 BS EN ISO 9001:2000 INTRODUCTION MULTI-TURN ACTUATOR SERIES With many years of experience with wide range of products used in the Valve
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR SHAFTS - NORMAL TYPE - ➁ 4 4 6 8 9 10 s 0,4 0,4 0,6 0, 0,8 0,8 1 1 ring d 2,, 4,,6 6,,4 8,4 9, d4 8,6 10, 11, 1, 14, 16 1 d2 2,8,8 4,8, 6,,6 8,6 9,6 groove m (H1) 0, 0, 0, 0,8 0,9 0,9
Tooling For Haas Lathes
Tooling For Haas Lathes Performance measured by you Visit Command Tooling Systems on line catalog for Command standard product part file downloads, up-to-date stock levels and our list price instant quoting
Installing CNC Stepper Motor Mounts on a Sherline Lathe
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Lathe upgrade kit part numbers: P/N 6720/6725 Model 4000/4500 lathes P/N 6730/6735 Model 4400 lathe P/N 6760/6765
Disassembly Instructions - 1 hp. Planetary Reduction Gears
Disassembly Instructions - 1 hp. Planetary Reduction Gears Important: Use these instructions along with the tool parts page or manual. Notice: To avoid damage to the motor housing, use the Special Repair
AC Servo System. 1S Series. Optimized installation and setup Increased machine productivity Global availability and global conformance
AC Servo System 1S Series Optimized installation and setup Increased machine productivity Global availability and global conformance 2 AC Servo System State of the art servo technology applied to general
Catalogue. Stepper Motors VRDM, ExRDM
Catalogue Stepper Motors VRDM, ExRDM Stepper Motors Table of Contents -phase stepper motors Product description...................................... VRDM 6 Technical data........................................
Thomas Disc Couplings Installation and Maintenance Series 71 Sizes (Page 1 of 11) DANGER!
Thomas Disc s Installation and Maintenance Series 71 s 150-1038 (Page 1 of 11) This is the Original Document in English Language Figure 1 - Thomas Series 71 1. General Information 1.1. Thomas Series 71
How To Use This Catalog
How To Use This Catalog Welcome To RSVP Circular Chasers Axial Radial Specialty Tools Welcome To The RSVP Tooling Interactive Catalog Section Clickable & Touch Links Within each page we have included a
ILA2E572PC1A0 integrated drive ILA with servo motor V - EtherCAT - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - EtherCAT - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network
Installing CNC Stepper Motor Mounts on a Sherline Mill
WEAR YOUR SAFETY GLASSES FORESIGHT IS BETTER THAN NO SIGHT READ INSTRUCTIONS BEFORE OPERATING Mill upgrade kit part numbers: P/N 6700/6710 Model 5000/5400 mills P/N 6705/6715 Model 2000 mill P/N 6740/6745
CNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
CD-ROM Sizing Software. ServoClass Couplings. Zero-backlash, low inertia couplings. for precision servomotor applications
CDROM Sizing Software ServoClass Couplings Zerobacklash, low inertia couplings for precision servomotor applications ZeroMax ServoClass Couplings ZeroMax s ServoClass Couplings are specifically designed
DynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS
Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number
RH Mini Series. Total Motion Control. Harmonic Drive acutator
D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS
SEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS
SEE IT BEFORE IT HAPPENS TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS SEE IT BEFORE IT HAPPENS Mo t or P ow e r Com pa n y www.m ot orpow e rc o. c om info@m ot orpow e rc o. i t All r ight s re se
Positioning Systems Rotary tables
Positioning Systems Rotary tables www.hiwin.de HIWIN GmbH Brücklesbünd 2 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78-0 Fax +49 (0) 7 81 9 32 78-90 info@hiwin.de www.hiwin.de All rights reserved. Complete
Cartridge Direct Drive Rotary Motors Selection Guide
Cartridge Direct Drive Rotary Motors Selection Guide with AKD Servo Drive Systems Kollmorgen: Your partner. In Motion. Every solution comes from a real understanding of the challenges facing machine designers
QUANTUM DEVICES,INC. QPhase ISO 9001 DESCRIPTION TYPICAL APPLICATIONS DESIGN FEATURES
QUANTUM DEVICES,INC. Improving the Quality of Life through the Power in Light QPhase DESCRIPTION Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using
DA DA 10 Technical Specification. Page 1/14. Volz Servos GmbH & Co. KG servos.com
1/14 DA 10 DA 10 05 42 2/14 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 6 5. Materials and Protective Features... 7 6. Dimensions... 7 6.1. Installation
TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS
TETRA COMPACT LOW VOLTAGE BRUSHLESS SERVOMOTORS BRUSHLESS TECHNOLOGY FEATURES AND BENEFITS Synchronous brushless servomotor, permanently excited Rated output power from 60W to 800W Maximum servomotor speed
ATS50 Series. Mechanical Bearing, Lead-Screw Stage. Low profile, small footprint. Ultra-fine resolution
Linear Stages Mechanical Bearing, Lead-Screw Stage Low profile, small footprint Ultra-fine resolution Integral brushless servo or microstepping motor Available with vacuum preparation Precision ground
Preparing the VSS/VSH Stepper Motors
VSS / VSH xtreme nvironment Stepper Motors - Vacuum to mbar Winding Temperature 7 to + Radiation Hardened to J/kg nvironments Preparing the VSS/VSH Stepper Motors Phytron offers different categories of
Cnc turning milling and drilling machine FLCX
Cnc turning milling and drilling machine FLCX5000-1000 Shanyi Cnc Machines FLCX5000-1000 Cnc turning milling and drilling machine has been developed by Shanyicnc co., ltd. We are the cnc machine manufacturer
847H. Description. Features. Specifications
847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536
D M M. Dynamic Motor Motion Technology Corporation DHT / DST SERIES AC SERVO MOTOR SPECIFICATION MANUAL
D M M Dynamic Motor Motion Technology Corporation DHT / DST SERIES C SERVO MOTOR SPECIFICTION MNUL Manual Code: CSMTR-G-7 Revision:.7 [October 7] This manual must be kept accessible to the user or operator.
Data Sheet. HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders. Description.
HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders Data Sheet Description The HEDS-65xx/HEDL-65xx are high performance two and three channel optical
23 EZHD synchronous servo motors with hollow shaft
23 EZHD synchronous servo motors with hollow shaft Table of contents 23 EZHD synchronous servo motors with hollow shaft Table of contents 23.1 Overview... 763 23.2 Selection tables... 764 23.3 Torque/speed
Thomas Disc Couplings Installation and Maintenance Series 71-8 Sizes (Page 1 of 10) DANGER!
Thomas Disc s Installation and Maintenance Series 71-8 s 225-750 (Page 1 of 10) This is the Original Document in English Language Figure 1-1. General Information Thomas Series 71-8 1.1. Thomas Series 71-8
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE
PRODUCTS & SERVICES GUIDE
PRODUCTS & SERVICES GUIDE IT S YOUR MOVE. 2 ROCKFORD BALL SCREW ABOUT US Ian McBain founded Rockford Ball Screw (RBS) in 1973 utilizing his years of experience in the industry with the goals of providing
Ordering Guide LINTECH. GS Series - N inch & 20 mm screw diameters - GS075 & GS20M series.
Ordering Guide - 0.750 inch 20 mm screw diameters - GS Series GS075 GS20M series Ground Screw GS 075 020 - - S - N - F - M02 - C65 - E00 - B00 - Lxxx.xxx Screw iameter 075-0.750 inch 20M - 20 mm Screw
W-Series Servo Motors and Drives
Servo System Overview W-Series Servo Motors and Drives Servo Motor and Drive Specifications Servo Motor and Drive Dimensions Operation, Monitoring, and Parameters Servo Cabling and Wiring Information Ordering
FBL Series. Heavy-Duty Horizontal Turning Lathes FBL
FBL Series Heavy-Duty Horizontal Turning Lathes FBL-230 300 FBL-230 Series Slant-Bed Lathe With Box Ways The Series is designed with its 4-degree slant bed, rigid box ways structure, programmable tailstock
Type XTSR71 Sizes
(Page 1 of 13) s 494-5258 Type XTSR71 s 494-5258 Figure 1 Thomas XTSR71 Coupling 1. General Information 1.1 Thomas Couplings are designed to provide a mechanical connection between the rotating shafts
The ZSH stepper motor convinces with its robust housing with high-strength cable gland. The motor is waterproof up to 10 m with the IP68 option.
/ZSH HRSH ZSH Stepper otor Robust. Powerful. Reliable. Phytron s HRSHEnvironment motors are particularly suitable for challenging applications in mechanical engineering and industry. Challenging conditions
Turning Center. Tan-Tzu Factory No.1, Lane 113, An-Ho Road, Tan-Tzu Hsiang, Taichung Hsien, Taiwan 427, R.O.C.
Turning Center ACCUWAY MACHINERY CO., LTD. Shen-Gang Factory: No.26, Lane 8, Da-Jou Road, Shen-Gang Hsiang, Taichung Hsien, Taiwan 429, R.O.C. TEL:+886-4-2-988 FAX:+886-4-2-916 E-mail:market@accuway.com.tw
C50 Cryomodule Cavity Tuner Study Evaluation of Planetary Gear Box Installed on Tuner Mechanism
JLAB-TN-08-056 C50 Cryomodule Cavity Tuner Study Evaluation of Planetary Gear Box Installed on Tuner Mechanism Hrishikesh Phadke, Ed Daly 1. INTRODUCTION As part of NL-12 decommissioning, tuner testing
Screws. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:
Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for
K series VK-1060 VERTICAL MACHINING CENTER
K series VK-1060 VERTICAL MACHINING CENTER VK-1060 VERTICAL MACHINING CENTER B ringing the most flexible & most competitive advantage of TWiNHOrN to a broader range of machining applications. From prototype
DUGARD EAGLE. Mega Slant and Mega Turn Heavy Duty CNC Lathes
DUGARD EAGLE Mega Slant and Mega Turn Heavy Duty CNC Lathes Dugard Eagle SS and SA Series Machine Features 60 for SA-Series, 45 for SS-Series slant bed construction ensures maximum stability and convenient
REGULACE AUTOMATIZACE BOR spol. s r.o.
REGULACE AUTOMATIZACE BOR spol. s r.o. NOVÝ BOR CATALOG : HSM D.C. SERVO MOTORS All products of the company REGULACE AUTOMATIZACE BOR, spol. s r.o. (Ltd.) are certified by accredited authority for certification
Lexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILA with AC synchronous servo motor Description ILA comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and an AC synchronous