BRUSHLESS DC geared motors
|
|
- Johnathan Horn
- 6 years ago
- Views:
Transcription
1 0 Watts with Ø 6 mm planetary gearbox Concentric output shaft Ideal for high reduction ratios Ideal for high torque applications High efficiency Reversible Output speed Available torque stage stages stages Motor Speed control 0-0 V and PWM 0-0 V and PWM 0-0 V and PWM Axial load (dynamic) N 70 0 Radial load (dynamic) N Efficiency (%) Casing temperature rise at C Weight (g) ± 70 7 ± max. 9 ± ± 0.. Ø ± 0. 7 Ø 6 7 ø L Ø Ø Ø 0 B Cable length 00 ± 0 mm C holes M depth 0 at 90 on Ø D Fixation hole M depth. E Key A x x L stage :.7 mm max. L stages : 9.7 mm max. L stages : 7. mm max. Respect the limits and precautions of use written in the 0W brushless motor section /60 Order/Technical Support - Tel: (00) 677- / FAX: (00) /
2 0 Watts with right-angle gearbox Output perpendicular to motor Ideal for low reduction ratios Ideal for applications needing a compact motor Silent operation Irreversible with high ratios Output speed Available torque stage Motor 0 0 Speed control 0-0 V and PWM Axial load (dynamic) N 00 Radial load (dynamic) N Temperature rise at % cycle ( C) Weight (g) 0. max. 7. max. 7x7 6 ±0. 0 ø 66 ø0. ± ±0. B x M depth mm C Cable length 00 ± 0 mm D x M on Ø 6 depth mm E x M depth mm Respect the limits and precautions of use written in the 0 W motor section. Continuous operation may cause overheating of the gearbox. This gearbox is recommended for applications where the on time does not exceed % of the time, please consult us. Order/Technical Support - Tel: (00) 677- / FAX: (00) / /6
3 0 Watts with Ø planetary gearboxes - PWM control Concentric output shaft Ideal for high reduction ratios Ideal for high torque applications High efficiency Reversible Output speed Available torque stage stages stages Motor Speed control PWM PWM PWM Axial load (dynamic) N Radial load (dynamic) N Efficiency (%) Casing temperature rise at C Weight (g) ø.7 max. L ±0. 6 ±0. ø9 ø x AWG 9 ±0. 0 ±0. B holes M6 x on Ø6 C Fixing hole M6 x 6 D Cable length 0 ± mm E Key A6 x 6 x according to DIN6 L stage : mm max. L stages : 0.9 mm max. L stages : 6 mm max. Respect the limits and precautions of use written in the 0W brushless motor section. /6 Order/Technical Support - Tel: (00) 677- / FAX: (00) /
4 0 Watts with Ø mm planetary gearbox V control Concentric output shaft, Ideal for high reduction ratios, Ideal for high torque applications, High efficiency, Reversible. Output speed Available torque stage stages stages Motor Speed control 0-0 V 0-0 V 0-0 V Axial load (dynamic) N Radial load (dynamic) N Efficiency (%) Casing temperature rise at C Weight (g) ø.7 max. L ±0. 6 ±0. x AWG 9 ±0. 0 ±0. ø9 ø B holes M6 x x onø6 C Fixing hole M6 x 6 D Cable length 0 ± mm E Key A6 x 6 x according to DIN6 L stage : mm max. L stages : 0.9 mm max. L stages : 6 mm max. Respect the limits and precautions of use written in the 0W brushless motor section. Order/Technical Support - Tel: (00) 677- / FAX: (00) / /6
5 0 Watts with right-angle gearbox Output perpendicular to motor Ideal for low reduction ratios Ideal for applications needing a compact motor Silent operation Irreversible with high ratios Output speed Available torque 0 Watts PWM control 0 Watts 0-0 V control Motor Speed control PWM 0-0 V Axial load (dynamic) dan 0 00 Radial load (dynamic) dan Temperature rise at % cycle ( C) Weight (g) max. B x M depth mm C Cable length 0 ± mm D x M on Ø6 depth mm E x M depth mm 6 x AWG.7 max. 6 ±0. 0 ø0 ±0. ø x7.. 6 ±0. Respect the limits and precautions of use written in the 0 W motor section. Continuous operation may cause overheating of the gearbox. This gearbox is recommended for applications where the on time does not exceed % of the time, please consult us. /6 Order/Technical Support - Tel: (00) 677- / FAX: (00) /
BRUSHLESS DC MOTOR FAMILY
BRUSHLESS DC MOTOR FAMILY Series NT HST Geared Brushless DC Permanent Magnet Motor The NT HST is designed to provide: Fast dynamic response High power density Compact package size Long life ball bearing
More informationLexium integrated drives
Description ILp for CANopen, PROFIBUS DP, RS ILA with AC synchronous servo motor Description ILA comprise control electronics with a fieldbus interface for CANopen DS, PROFIBUS DP or RS and an AC synchronous
More informationData Sheet MEM 16. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com
More informationBholanath. User s Manual. Precision Engineering Pvt.Ltd. BHSSD Step Servo Driver. Note:-
Bholanath Precision Engineering Pvt.Ltd. User s Manual Step Servo - BHSS - 750 W BHSSD Step Servo Driver Note:- Step servo drive & motor are matched pair with BH-75Vac power supply Email : support@bholanath.in
More informationPrecision Geared dc servo motors. HPE M series
Precision ed dc servo motors HPE M Features Precision servo motors with optional dc tachogenerator & or encoder for digital control Choice of models from to 9 mm diameter Up to 2, counts per rev. resolution
More informationPWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical
More informationOptical encoder MEC22 HR
Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square
More informationMagnetic Encoder MEM 22
Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed
More information3. HIWIN rotary tables TMS
CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 ()1388 7784 Fax: +44 ()1388 7788 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk 3. HIWIN rotary tables TMS 3.1 Characteristics
More informationEC 45 flat with integrated electronics Document ID: en Operating Manual
EC 45 flat with integrated electronics Document ID: 919801en Operating Manual Edition June 2017 The EC 45 flat with integrated electronics is a brushless, speed-controlled 1-quadrant drive. It is available
More informationData Sheet MEM 22. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM 22 IE Rev.1.9 / 16.05.2017 info@pwb-encoders.com
More information4 / 24,5 2,6 / steel, black coated. clockwise, viewed from the front face. ø15,9 ø17-0,052 ø6-0,05 8,1 ±0,3 2, T
DC-Micromotors Precious Metal Commutation 4, mnm For combination with (overview on page 4-5) Gearheads: 5, 6, 6/7 Encoders: IE 6... 5 Series 4 74... SR Nominal voltage Terminal resistance Output power
More informationUser's Manual. Step Motor Driver L E V E L
/15/ User's Manual 550 Step Motor Driver Applied Motion Products, Inc. 404 Westridge Drive Watsonville, CA 50 Tel (31) 1-555 (00) 525-10 Fax (31) 1-544 E REVISION L E V E L s drives controls Technical
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
More informationART50/100 Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and small footprint. Ultra-fine resolution
/ Series Rotary Stages /100 Series Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and small footprint Ultra-fine resolution Integral brushless servomotor or microstepping motor Optional aperture
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable
More informationPKG-171-MBC25-PS-CBL System Diagram and Specifications
PKG-171-MBC25-PS-CBL System Diagram and Specifications Included Components: 17Y102S-LW4-MS Stepper Motor MBC25081TB Stepper Driver PSAM24V2.7A Power Supply CBL-20AWG-04C-010-MS Motor Cable CBL-AA4366 Power
More informationTorque Sensor Series 3000 and Series 4000
Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range
More informationUser's Manual. Step Motor Driver
9/7/99 7080.ai User's Manual 7080 Step Motor Driver Applied Motion Products, Inc. 0 Westridge Drive Watsonville, CA 95076 Tel (8) 76-6555 (800) 55-609 Fax (8) 76-65 s drives controls Technical Specifications
More informationServoStep technology
What means "ServoStep" "ServoStep" in Ever Elettronica's strategy resumes seven keypoints for quality and performances in motion control applications: Stepping motors Fast Forward Feed Full Digital Drive
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str. 39a 53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com AE30 medium temperature range LD 1 of 9 Rev. 3.0 / 06.07.2007 Description
More informationDynamo Brushless DC Motor and GreenDriveTM Manual
Dynamo Brushless DC Motor and GreenDriveTM Manual This manual was developed as a guide for use by FIRST Robotics Teams using Controller Part Number 840205-000 in conjunction with the Nidec Dynamo BLDC
More informationXY-Stages series 5102
User s Manual Huber Diffraktionstechnik GmbH & Co. KG Sommerstrasse 4 D - 83253 Rimsting Phone +49 (0) 8501 6878-0 Fax +49 (0) 8051 6878-10 info@xhuber.com www.xhuber.com User s manual Manual 5102_en-A06
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationCompact drives. Rotary actuators
Compact drives Rotary actuators Production and delivery of servodrives and control systems. The Czech company TG Drives offers servodrives since 1995 for machines and equipments in industrial automation.
More informationHarmonic Drive Actuator. D C S e r v o S y s t e m s. P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l. RH Mini Series RHS and RFS Series
D C S e r v o S y s t e m s RH Mini Series RHS and RFS Series Total Motion Control Harmonic Drive Actuator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationPKP Series. Bipolar 1.8 and 0.9 Stepper Motors. with Encoders. Features. Product Lineup
Bipolar. and.9 Stepper s PKP Series with s Introducing the new. Standard and.9 High Resolution PKP Series stepper motors with an incremental Line Driver or Voltage output type encoder pre-assembled. Features
More informationStandard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
More informationBTA Rotary Actuators. Torque - mnm. 100% Duty Cycle. 25% Duty Cycle 5 50% Duty Cycle 2
BTA Rotary Actuators 300 10% Duty Cycle 1 25% Duty Cycle 5 50% Duty Cycle 2 100% Duty Cycle Torque - mnm 200 BTA Brushless Torque Actuators Controllable velocity and position Completely enclosed construction
More informationServo Amplifier 4-Quadrant PWM for Brushless DC-Servomotors
Servo Amplifier -Quadrant PWM for Brushless DC-Servomotors Series BLD 010 Operating Instructions Index Chapter 1. Description 2. Illustration 3. Specification. Dimensions. Safety notes.1 Skilled personnel.2
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationSGMPH Gearmotors - With Incremental Encoder
- With Incremental Encoder Rated Output : 100W, 200W, 400W, 750W, 1500W Design Features 1. Compact Fits in limited mounting space 2. Torque 40.9 to 3540in lb peak torque Cost-effective solution for low
More informationPositioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More information/ a. This manual is to be given to the end user. nxs/m. Nh6 OXZ. Pjl Servo gearboxes. Installation and maintenance
P Nh6 D H en 36 E W R RU This manual is to be given to the end user OXZ EX EY T nxs/m GA AD F a HB Installation and maintenance LEROY-SOMER INSTALLATION AND MAINTENANCE NOTE - CAUTION - CONTENTS NOTE LEROY-SOMER
More informationGEA G, Size 1 Brushless Servo-Gearmotors
GEA G, Size Brushless Servo-Gearmotors DESCRIPTION The Moog GEA G Series Gear Motor is based on the high dynamic Moog AC Servomotors and a technologically improved single stage planetary gear box. The
More informationVert-X 16. Applications Servodrives Dancer arm Operating table
Version B C Electrical Data Measuring range 0... 360 360 Independent linearity see table B see table C Max. hysteresis see table B see table C Resolution see table B see table C Max. repeatability see
More informationZettlex. Precision in the Extreme
Zettlex is a sensors company. We design, make and sell sensors & sensor components for position and speed measurement. Flow metering Our company motto is signifying that even in harsh environments, our
More informationT40B. Torque Flange. Special features. Data sheet. Overall concept
T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal
More informationRH Mini Series. Total Motion Control. Harmonic Drive acutator
D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS
More informationPKG-232-MBC12-PS-CBL System Diagram and Specifications
PKG-232-MBC12-PS-CBL System Diagram and Specifications Included Components: 23Y206S-LW8-MS Stepper Motor MBC12101 Stepper Driver PSA80V4A-1 Power Supply CBL-18AWG-04C-010-MS Motor Cable WIR-1007-18-YEL
More informationOperating Instructions
Operating Instructions Torque Transducer Type CD9515 Series Please read instruction carefully. Important Advice: The torque transducers of type CD9515 are suitable for applications in laboratories (for
More informationRotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationVdc 9 to 30 (unregulated) and 5 ±0.5 (regulated) Supply voltage
NRH280DP dual output no contact rotary sensor PERFORMANCE Measurement range 20 to 360 in 1 increments Supply voltage 9 to 30 (unregulated) and 5 ±0.5 (regulated) Over voltage protection Up to 40 (-40 to
More informationNOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
More informationVert-X 37-5V. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles
Version A B C Electrical Data Measuring range 0... 360 0... 360 360 Linearity see table A see table B see table C Max. hysteresis see table A see table B see table C Resolution see table A see table B
More informationInstruction Manual BGE6007 Preliminary
Instruction Manual BGE00. General Discription: The BGE00 is a integral speed-control electronics for -quadrant control, that contains all the necessary components for driving the BGx, BGx0 and BGx series
More informationIncremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
More informationENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
More informationIncremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
More informationT40FH. Torque flange. Special features. Data sheet
T40FH Torque flange Special features - Nominal (rated) torques: 100kNm, 125kNm, 150kNm, 200kNm, 250kNm, 300kNm - Nominal (rated) rotational speed of 2000 rpm up to 3000 rpm - Compact design - Version for
More informationIncremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
More informationABLE. VRL Series. Planetary Servo Reducers. New Performance Leader
VRL Series ABLE Planetary Servo Reducers ew Performance Leader Industry Standard Mounting Dimensions Thread-in Mounting Style Best-In-Class Backlash ( 5 arc-min) Ships in hours Assembled in the USA VRL
More informationACTIVE and ACTIVE Cube. Installation manual - Cold Plate Frequency Inverter 230V / 400V
ACTIVE and ACTIVE Cube Installation manual - Cold Plate Frequency Inverter 230V / 400V General points on the documentation This documentation is valid for the frequency inverter series ACT and ACU in
More informationVert-X 28HD - 24V / V. Applications Harvester Public transport Construction machines
Sensor principle MH-C MH-C2 Electrical data Measuring range 0...360 - Indep. linearity % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz
More informationSE22 Mini Encoder Data Sheet 5V TTL power supply optical model
SE22 Mini Encoder Data Sheet 5V TTL power supply optical model 1 Description SE22 is a high performance, low cost, hollow shaft encoder family, very easy for assembly on shaft diameters set ranging from
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationProduct Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control
Product Information ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control July 2017 ECN/ERN 1300 series Rotary encoders with integral bearings for elevator
More informationAbsolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
More informationOverview Universal Shaft Transmitter
Overview Universal Shaft Transmitter Partenaire en France M MANNE A Sensortelemetrie FGP Sensors & Instrumentation - ZI - 24 rue des Dames - 78340 LES CLAYES SOUS BOIS Tél. : 01 30 79 65 40 - Fax. : 01
More informationRDrive 85 servo motors. User manual
INTRODUCTION Rozum Robotics has designed its RDrive (RD) servo motors to enable precision motion control in industrial and commercial applications. This manual is intended for technicians and engineers
More informationENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:
ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog
More informationHarmonic Drive actuator
Harmonic Drive actuator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l The RSF series servo actuator combines a high performance brushless servomotor with a high accuracy Harmonic Drive gearhead
More informationStepper Motors WE CREATE MOTION
WE CREATE MOTIO PRECIstep Technology EW Page FDM 6 Two Phase with Disc Magnet, AM 8 Two Phase,6 AM Two Phase,6 ADM S Two Phase with Disc Magnet, 6 7 AM Two Phase 6 8 AM Two Phase AM -R Two Phase WE CREATE
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been a leading manufacturer of state-of-the
More informationFIBRODYN DM DIRECT DRIVEN HIGH-SPEED ROTARY TABLES DATA SHEET COLLECTION
FIBRODYN DM DIRECT DRIVEN HIGH-SPEED ROTARY TABLES DATA SHEET COLLECTION FIBRODYN DM10 Dimensions of FIBRODYN DM10 FIBRODYN DM10.X FIBRODYN DM10.X with control FIBRODRIVE plus Tecnical data for FIBRODYN
More informationIncremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
More informationOverview: Extensions. Stepper Motors. Stepper motor with motor brake Permanent magnet brake for 24V supply DC
ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH
More informationProducts Available From
Products vailable From Solid State Relays and I/O Modules atalog utomation ontrols atalog Switches and Sensors atalog Motors and Fans atalog Pneumatics atalog 5 For your copy of the catalogs, contact Tel:
More informationPKG-341-MLA-CBL System Diagram and Specifications
PKG-341-MLA-CBL System Diagram and Specifications 600 34Y112S-LW8, MLA10641, Div by 16, 120VAC, Series 400 Included Components: 540 360 34Y112S-LW8-MS MLA10641 CBL-18AWG-04C-010-MS PWR-10EMC1 LIN-AA4254
More informationILA2E572PC1A0 integrated drive ILA with servo motor V - EtherCAT - indus connector
Characteristics integrated drive ILA with servo motor - 24..48 V - EtherCAT - indus connector Main Range of product Product or component type Device short name Motor type Number of motor poles 6 Network
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationOverview: Extensions Stepper motor Stepper motor with motor brake Permanent magnet brake for 24V supply DC
ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH
More informationCatalogue. Stepper Motors VRDM, ExRDM
Catalogue Stepper Motors VRDM, ExRDM Stepper Motors Table of Contents -phase stepper motors Product description...................................... VRDM 6 Technical data........................................
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationOPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting
More informationNOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE ULTIMATE COUPLIN FROM 0.05 10 Nm BACKLASH FREE MINIATURE BELLOWS COUPLINS Areas of application: Ideal for precise transmission
More informationMini Encoder High Resolution
Mini Encoder High Resolution PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEHR25 plug Rev.5A / 27.04.2017 info@pwb-encoders.com
More informationInstruction Manual BGE6007
Instruction Manual BGE00. General Discription: The BGE00 is a single quadrant controller that contains all the necessary components for driving the BG0, BG and BG series of brushless DC motors. A single
More informationBLuAC5 Brushless Universal Servo Amplifier
BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives
More informationintroduction to Precision lead screws & Miniature Ball Screws
introduction to Precision lead screws & Miniature Ball Screws Dynetics - your partner in movement Dynetics represents leading manufacturers with great technical expertise in micro-motor drive solutions,
More informationC50 Cryomodule Cavity Tuner Study Evaluation of Planetary Gear Box Installed on Tuner Mechanism
JLAB-TN-08-056 C50 Cryomodule Cavity Tuner Study Evaluation of Planetary Gear Box Installed on Tuner Mechanism Hrishikesh Phadke, Ed Daly 1. INTRODUCTION As part of NL-12 decommissioning, tuner testing
More informationCOMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
More informationUniversal Radius Mounting Option. Fixed Radius Mounting Option
F e a t u r e s Factory Set for Same Day Dispatch (1 to 65,536 Pulses Per Rev) 100 Degrees Centegrate cabability as standard Opto-ASIC Technology Any bore - up to 15mm bore (Metric) or (Imperial) The 60HA
More informationn Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S.
Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Application The 8661 precision
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationMODEL S15 Incremental Optical Rotary Encoder
MODEL S15 Incremental Optical Rotary Encoder Up to 200 KHz frequency response all channels Small compact size: 1.51 diameter 1.00 dia. Bolt circle mount Resolutions up to 12,500 cycles / revolution ( 50,000
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationSERVO INDEXING AT MECHANICAL INDEXER PRICES
SERVO INDEXING AT MECHANICAL INDEXER PRICES 1 Servo indexing at mechanical indexer prices The EZ INDEXER servo indexers are high precision indexing machines designed to be low cost without sacrificing
More informationURANIUM-SERIES AMPLIFIER
URANIUM-SERIES AMPLIFIER OWNER S MANUAL GZUA 2.250SQ-PLUS GZUA 4.150SQ-PLUS GZUA 6.200SQ-PLUS Common Features 2 Ohm stable stereo (GZUA 4.150SQ-PLUS & 6.200SQ-PLUS) 1 Ohm stable stereo (GZUA 2.250SQ-PLUS)
More informationThis manual is to be given to the end user Installation and maintenance
3831-03.2005 / a 37 en This manual is to be given to the end user HF HU DH7 T. Nj7 IE E XF XF BF 4 x S3 D1 D2 4 x S3 RU x R XA XB XA XB VA VB V HG R1 nxs2/m2 VF VU RB 4 x S4 Installation and maintenance
More informationLENORD. +BAUER... automates motion. GEL 2444K PG Configurable rotational speed and position sensor with operating hours counter
GEL 2444K PG Configurable rotational speed and position sensor with operating hours counter LENORD +BAUER... automates motion. Technical information Version 2015-03 General The measuring system comprises
More informationXXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
More informationT22. Torque transducer. Special features. Data sheet
T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring
More informationMotion Controller 2-Quadrant PWM for Brushless DC-Servomotors
Motion Controller -Quadrant PWM for Brushless DC-Servomotors Series BLD 0 Series BLD 0 Operating Instructions Miniature Drive Systems Micro Drives DC-Micromotors Precision Gearheads Servo Components Drive
More informationIP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
More informationDA 30 High Torque Technical Specification
1/17 DA 30 High Torque DA 30-HT-30-5848 2/17 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Materials and Protective Features... 6 5. Dimensions... 6 5.1. Installation
More information