Advanced Paperless Recorder eco-graph a

Transcription

1 Technical Information TI 097R/4/ae Advanced Paperless Recorder eco-graph a User friendly paperless recorder, for recording analog signals, counter values and quantities. Swift overview using the integrated signal analysis. Application The Advanced Paperless Recorder Eco-Graph A is a compact measured value acquisition system with continuous savings thanks to the lack of replacement pens and paper costs. Eco-Graph A records measured value processes, quantities, operating times, monitors set point violations and stores the data both internally and on diskette. A swift overview can be gained by using the integrated signal analysis giving intermediate, daily, monthly and yearly reports. The measured data can be read out, visualized and analyzed using the ReadWin 000 PC operating software. Unit and channel set-up can be done on the unit or using a PC. Ideally suited for the water/waste water market, the Eco-Graph A can also be used in all other industrial branches for recording/monitoring processes and sequences. Features and Benefits Electronic recording replaces pen and strip chart recorders, saves consumable costs Universal inputs measure most signal types for universal applications (mv, V, ma, RTD, TC) Digital inputs can be used as event inputs, operation time counters or impulse counters Quick set up and integrated operating manual provide fast commissioning, save set up time Flash memory ensures reliable archiving, kept safe even during power failure ReadWin 000 PC software package included with Eco-graph, saves software purchase costs Serial interface, Ethernet or modem communication Totalization (integration) of analog input signals as standard Minimum, maximum, average value recording Display of the last 7 analyses front end on unit Loop-power supply as an option ATEX (European) approval for Ex-Zone The Power of Know How

2 Function and system construction Measurement Principle: Electronic recording, plotting, analysis, and archiving of analog and digital input signals from measuring devices. Measurement System: All connected analog measurement points are measured in parallel every 0 ms. Galvanic isolation channel to channel is 00 V. Damping is presettable from 0 to seconds per analog input. System basic damping can be ignored. Data storage is done in the internal memory (power failure secure via FLASH technology) and in the integrated diskette drive. Long term storage of data is done in the PC whereby the data can be trasferred to the PC either by diskette or by using a serial interface. The ReadWin PC application software, provided free with the recorder, can configure the unit, display values real time, and display measured values. Input signals Current (ma) Current Range: 0 to 0 ma / 0. ma; linear/square ± 0 µa 4 to 0 ma / 0. ma; linear/square ± 0 µa -0 to 0 ma / 0. ma; linear ± 44 µa Load tension V Maximum 00 ma Voltage (mv) Voltage Range: 0 to 00 mv / mv; linear ± 80 µv 0 to 00 mv / mv; linear ± 40 µv 0 to V / mv; linear/square ± mv 0 to 0 V / mv; linear/square ± 0 mv - to V / mv; linear ± 0 mv -0 to 0 V / mv; linear ± 0 mv Input Impedance: > MΩ (MR < 00 mv) > 0 kω (MR 00 mv Resistance thermometer (RTD) Pt 00: -8 to 6 F / 7 F ± 0.8 K (/-wire) (-00 to 80 C / K) ± 0. K (4-wire) Pt 00 (linearization to JIS, -8 to 0 F / 7 F ± 0.8 K (/-wire) C604-8), (-00 to 60 C / K) ± 0. K (4-wire) Pt 00: -8 to 6 F / 7 F ± 0.8 K (/-wire) (-00 to 80 C / K) ± 0. K (4-wire) Pt 000: -8 to 6 F / 7 F ± 0.8 K (/-wire) (-00 to 80 C / K) ± 0. K (4-wire) Ni 00: -76 to 6 F / 7 F ± 0.4 K (/- wire) (-60 to 80 C / K) ± 0.4 K (4-wire) Connections: / or 4-wire circuits, shielded cable Cable Compensation: 0 Ω per cable Measurement Current: 00 µa Open or closed circuit monitoring: Indicates on display Thermocouples (TC) B (Pt0Rh-Pt6Rh): to 08 F / 900 F ± 0.% from 7 F (0 to 80 C / 00 K) (± 0.% from 400 C) E (NiCr-CuNi): -44 to 8 F / 80 F ± 0.% from - F (-70 to 000 C / 00 K) (± 0.% from -80 C) J (Fe-CuNi): -46 to 9 F / 80 F ± 0.% from -48 F (-0 to 00 C / 00 K) (± 0.% from -00 C) K (NiCr-Ni): -8 to 0 F / 80 F ± 0.% from - F (-00 to 7 C / 00 K) (± 0.% from -80 C) L (Fe-CuNi): -8 to 6 F / 80 F ± 0.% (-00 to 900 C / 00 K) (± 0.%) N (NiCrSi-NiSi): -44 to 7 F / 80 F ± 0.% from - F (-70 to 00 C / 00 K) (± 0.% from -80 C) R (PtRh-Pt): -8 to F / 900 F ± 0.% from F (-0 to 768 C / 00 K) (± 0.% from 0 C) S (Pt0Rh-Pt): -8 to F / 900 F ± 0.% from F (-0 to 768 C / 00 K) (± 0.% from 0 C) T (Cu-CuNi): -44 to 7 F / 80 F ± 0.% from -8 F (-70 to 400 C / 00 K) (± 0.% from -0 C) Thermocouples continued top of page.

3 Input signals (continued) Accuracy Thermocouples (TC), continued U (Cu-CuNi): -8 to F / 80 F ± 0.% from -8 F (-00 to 600 C / 00 K) (± 0.% from -0 C) W (WRe/WRe): to 499 F ± 0.% (0 to C) (± 0.%) W (WRe/W6Re): to 499 F ± 0.% (0 to C) (± 0.%) Measurement Current: 00 µa for open circuit monitoring Comparison Point: Comparison points CJC (to IEC 60 84) selectable - internal compensation of the terminal temperature - external,, 68,, 40, 8, 76 F (0, 0, 0, 60, 70, 80 C) Comparison Point Accuracy: ±.8 F (±.0K) (can be calibrated front end) Input Resistance: 900 kω Open Circuit Monitor: Cable open circuit indicates in the display Reference Conditions: Measurement Accuracy: Warm Up Time: Ambient Temp. Influence: Ambient temperature 77 F ± 9 F ( C ± C) Air humidity: ± 0% rh Refer to page /, input type > 0. hour 0.0%/K of FSD Electrical connections (terminal and socket layout) with optional loop-power supply RS 48 8 Cable R L R L = resistance 9 RxD/TxD() RxD/TxD( _ ) to 0 V 0% -% 48 to 6 Hz L N 4 to 48 VAC/VDC 0/48 to 6 Hz (~) (~) _ GND GND max. 0 V/ A HART AH B C Additional units Power Digital in (DI) >0 ms V - 4 VDC _ > ma _ GND N L L- L Rel. Rel. Rel. RS RS48 DI DI DI DI 4 0 k 0 k To PC: Cable with 9 pol. Sub-D plug RxD - GND - TxD - To PC: Cable with pol. Sub-D plug To modem: Cable with 9 pol. Sub-D socket 4 V / ma 4 V / ma 4 V / ma HART AH B C 4 CH CH Ethernet HART AH B C 4 CH D- E- D- E- D- E- On connecting channels 4-6, see terminal connections CH - -wire loop-power supply with HART - I Y 7 4 RS To modem: Cable with pol. Sub-D socket I - Y HART Commu- Box -wire loop-power supply without HART Analog inputs x x4 x x x - - a) > 00 mv - b) 00 mv - x x4 x x4 x x4 x x x x x x x x x 0 to 0 ma, 4 to 0 ma, /- 0 ma, (Volt drop < V, R i < 0 Ohm) a) 0 to V, 0 to 0 V, /- V, /- 0 V b) 0 to 00 mv, 0 to 00 mv B (Pt0Rh-Pt6Rh): to 08 F ( 0 to 80 C) E (NiCr-CuNi): -44 to 8 F (-70 to 000 C) J (Fe-CuNi): -46 to 9 F (-0 to 00 C) K (NiCr-Ni): -8 to 0 F (-00 to 7 C) L (Fe-CuNi): -8 to 6 F (-00 to 900 C) N (NiCrSi-NiSi): -44 to 7 F (-70 to 00 C) R (PtRh-Pt): -8 to F (-0 to 768 C) S (Pt0Rh-Pt): -8 to F (-0 to 768 C) T (Cu-CuNi): -44 to 7 F (-70 to 400 C) U (Cu-CuNi): -8 to F (-00 to 600 C) W (WRe/WRe): to 499 F (0 to C) W (WRe/W6Re): to 499 F (0 to C) x x4 x x x x x4 x x x Pt00: Pt00: Pt000: Ni00: -8 to 6 F (-00 to 80 C) -8 to 6 F (-00 to 80 C) -8 to 6 F (-00 to 80 C) -76 to 6 F (-60 to 80 C) Shielded

4 Power Supply Input Power: Standard, to 0 VAC; 0% -%; 48 to 6 Hz Low voltage, 4 to 48 VAC / VDC; 0%, -%; 0/48 to 6 Hz Power Consumption: VA Electrical Safety: EN 6 00-, protection class I; standard voltage, over voltage category II; low voltage, over voltage category III Application conditions Installation conditions Installation Angle: Usage angle to DIN 6 7, NL 90 ± 0 Installation Hints: General Terminal strips are keyed, screw terminals for cable size maximum AWG 4 (with ferrules) Panel mounted: Installation depth, approximately 8. (0 mm) including terminals Panel thickness, 0.08 to.7 ( to 40 mm) Attachment to DIN 4 84 Dimensions and Mounting Details, Panel Mounted.67" (44 mm).4" (8 mm).67" (44 mm).4" (8 mm) 8.7" (0 mm) Panel cut-out dimensions." (6 mm).0" (8 mm) Desk Top Version. (9 mm) 6.8 (7 mm) 7.40 (88 mm) 9.9 (6 mm) 9.6 (44 mm) 0.4 (64 mm) NEMA 4 (IP 6) Field Housing.6 (0 mm).6 (0 mm) 0.0 (4 mm) 4

5 Operating Conditions Ambient Temperature: Storage Temperature: Climatic Class: to 0 F (0 to 0 C) - to 60 F (-0 to 70 C), 0 to 7% rh, without condensation To IEC : B Ingress Protection: Front, NEMA (IP 4, EN 60 9, Cat. ) Rear, no protection, IP 0 (EN 60 9, Cat. ) Field housing, NEMA 4 (IP 6) Electromagnetic Immunity: EN 6 6- Compatibility: NAMUR recommendation NE : - ESD (electrostatic discharge), EN Level (6/8 kv) - Electromagnetic fields, EN , Level (0 V/m); additional deviation < 0.4% additional deviation on channel 4: % at approx. 460 mhz - Burst (fast transients), EN , Level (/ kv) - Surge on power cable, EN , kv asymmetrical, kv symmetrical - Surge on signal cable, EN , kv asymmetrical with external protection - HF cable fed, EN , 0 V, additional deviation < 0.% - 0 Hz magnetic fields EN , 0 A/m - Power failures EN , > 0 ms Normal Mode Noise 40 db on measurement range / 0 (0/60 Hz ± 0. Hz), at Rejection (EN 698-): voltage input Common Mode Noise Rejection (EN 698-): 80 db (0/60 Hz ± 0. Hz) at voltage input RF Protection: To EN 6 6, Class A (operation in industrial environment) Construction Operation and Display Material: Weight: Operating Elements: Display Elements: Display Modes: Real Time Clock: Remote Operation: Panel mount: Front bezel / door from die cast metal, matt chromed. Casing and rear panel, galvanized sheet steel. Desktop (portable): Unit is installed inside a varnished sheet steel housing. Wall mount: Unit is installed inside a hardened plastic NEMA 4 (IP 6) housing. Panel mount, approximately 7.7 pounds (. kg) Desk top version, approximately 4. pounds (6.4 kg) Selectable operation using 6 front mounted push buttons interactive with on screen dialog. Integrated operating manual (push button operation). QUICK set up: setting up date, time, feed rate. Selection of signal type, measurement type, engineering units and measurement range (per channel). Automatic signal recognition and setting. Color graphic with inch (6 mm) diagonal screen, 76,800 dots (0 x 40 pixel) Curves/sequences, curves in zones, digital display, event list (alarm conditions/power failures, condition display, historical display in curve plot form with display of the digital values, date and time). Switchable summer/normal time automatic. Buffer 4 years, at ambient temperature 9 to 77 F ( to C) Setting up and archiving unit parameters per diskette or using the rear mounted serial interface (only with the Digital I/O option, refer to option, page 6) RS (e.g. modem) or RS 48 with the ReadWin 000 PC software from EndressHauser Measurement storage Data Security: Selectable recording speeds ( Feed rate ) 0, 0., 0.4, 0.8,.,.4, 4.8, 0.0,.0, 4.0, 40.0 ft/h (0,, 0, 0, 0, 60, 0, 40, 00, 600, 000 mm/h) Buffer 0 years for program/measured value memory (flash memory, non volatile, internal memory 04 ksram or 048 ksram) Cyclic copy of measured data to -/ diskette for archiving.44 MB; resolution is dependent on the preset feed rate (refer to feed rate chart, top of page 6) Permanent storage of the preset unit parameters in the Flash memory (non volatile)

6 Measurement storage (con t) Comparison Feed Rate Function principle of the display and recording/storage: to Storage Interval: Data is stored in defined intervals, dependent on the selected feed rate (it is possible to define a different feed rate/storage interval in alarm conditions). Feed rate inch/h Feed rate mm/h Storage cycle in seconds Typical memory availability Conditions for the following table: - No alarm violations / event storage - No digital inputs Analog Feed rate Feed rate 0 Feed rate 60 Feed rate 0 Feed rate 000 Channels mm/h (4 min) mm/h ( min) mm/h (0 sec) mm/h (0 sec) mm/h ( sec) Internal memory 04 kb 6 days, h 90 days, 7 h 0 days, h days, h day, h 7 days, 8 h 4 days, 0 h 8 days, h 9 days, h h 6 6 days, h 4 days days, 8 h days, 0 h h Internal memory 048 kb 848 days, 0 h days, h 70 days, 6 h days, 8 h days, h 09 days, h 7 days, 6 h 4 days, 0 h days, h days, h 6 8 days, h 79 days, h 6 days, h days, 6 h day, 7 h Diskette,.44 MB 677 days, h 69 days, h 6 days, h 8 days, h days, 9 h 406 days, 9 h 0 days, 6 h days, h 6 days, h day, 6 h 6 4 days, h 6 days, h days, 4 h 0 days, 4 h day, h Options Digital I/O 4 Digital Inputs: To DIN 9 40: Logical 0 = - to V, Active with logical = to 0 V, maximum Hz, maximum V, input current approximately. ma Auxiliary Voltage Output: For powereing digital inputs with potential free contacts, 4 VDC maximum 0 ma, short circuit protected, unstabilized Relays: Changeover contact, max. 0 VAC / A, for alarm condition transmission, at desktop version: maximum 0 V eff / 60 VDC Serial Interfaces: Type (RS / RS 48) and unit address can be selected Maximum cable length using shielded cable: 0 ft ( m) for RS ; 80 ft (000 m) for RS 48, galvanically isolated from the system Loop-power supply Outputs: 4 V ± 0%, maximum ma (internal current limiter) Communication Resistance: The resistors for HART communication are built in (0Ω); mm diameter sockets Galvanic Isolation: 00 V test voltage to all other circuits Ethernet interface (in preparation) Ethernet Interface: Internal Ethernet interface 0BaseT, connectro type RJ4, shielded cable, allocation of the IP address in the Eco-Graph A setup menu Certificates CE Mark: ATEX: By attaching the CE mark, EndressHauser confirms that the instrument fulfills all the requirements of the relevant EC directives. EU-Richtlinie 94/9/EG IIG EEx np IIC T4 (option) 6

7 Accessories The following accessories are included with the shipped unit: Unit plug-on screw terminals for power supply and signal inputs Panel mounting jack screws, operating manual and ReadWin 000 software package for PC. Optional Accessories Order Code RS operating cable for PC connection RSGA-S RS interface cable for modem connection RSGA-S RS 48 <-> RS adapter set, with VAC power supply in compact housing, no galvanic isolation RSGA-S Connection kit for RS <-> RS 48 adapter set and RS modem RSGA-S4 Shielded signal cable shielded connection strip for channel unit RSGA-A Shielded signal cable shielded connection strip for 6 channel unit RSGA-A RS / Ethernet interface VAC for DIN top hat rail, including interface cable, approximately 6 ft ( m) RSGA-E RS 48 / Ethernet interface VAC for DIN top hat rail RSGA-E NEMA 4 (IP 6) field housing RSGA-H Lock retro-fitting kit, complete RSGA-LA Lock retro-fitting kit, neutral RSGA-LB RS / RS 48 adapter set for DIN top hat rail, 4 VDC supply voltage, including VAC power adapter with galvanic isolation and PC / modem interface cable RSGA-S7 Plug-on -pole terminal strip for power supply Plug-on -pole terminal strip for relays 009 Plug-on -pole terminal strip for analog input 00 Plug-on 6-pole terminal strip for digital inputs Ordering Information Paperless recorder Eco-Graph A RSG Signal Inputs universal inputs (mv, V, ma, RTD, TC) 6 6 universal inputs (mv, V, ma, RTD, TC) 8 universal inputs integrated loop-power supply Power Supply to 0 VAC 4 to 48 VAC / VDC Digital In/Outputs / Interface A Digital in/outputs / interface not required D Digital in/outputs not required / with Ethernet interface (in preparation, consult factory) E 4 impulse/count inputs, relays / RS /4848 interface F 4 impulse/count inputs, relays / Ethernet RS /48 interface (in preparation, consult factory) 4 Internal Memory / Recording Length A Memory for maximum MB / approximately 00 ft (0 m) recording length for channels B Memory for maximum MB / approximately 00 ft (60 m) recording length for channels C Factory calibration certificate / Memory for maximum MB D Factory calibration certificate / Memory for maximum MB Additional equipment Panel mounting,.7 x.7 (44 x 44 mm) front bezel, NEMA (IP 4) ingress protection Desk top housing, power cable with US plug Field housing, NEMA 4 (IP 6) 6 Operating version H American E Spanish 7 Model A Standard equipment without disk lock B Neutral version (without EH logo) C Standard equipment with disk lock D Neutral version (without E=H logo) with disk lock 8 Software A Standard software 9 Certification No certification A ATEX IIG EEx np IIC T4 without diskette drive 7

8 Supplemental documentation Eco-Graph A Operating manual BA R/09 ATEX Safety instructions XA 04R/09/a For application and selection assistance, in the U.S. call 888-ENDRESS For total support of your installed base, 4 hours a day, in the U.S. call Visit us on our web site, United States EndressHauser, Inc. 0 Endress Place Greenwood, IN 464 Phone: (7) ENDRESS FAX: (7) Canada EndressHauser Canada Ltd. 440 Graham s Lane Unit, Burlington ON, L7S W Phone: (90) FAX: (90) Mexico EndressHauser Paseo del Pedregal No. 60 Col. Jardines del Pedregal 0900, Mexico D.F. Mexico Phone: () FAX: () EndressHauser The Power of Know How TI 97R/4/ae/ EndressHauser, Inc.