TECHNICAL DATA SHEET. smartflower POP. As of: August 2015 Typing and printing errors reserved.

Transcription

1 TECHNICAL DATA SHEET smartflower POP.

2 TECHNICAL DATA POWER OUTPUT Nominal output Output through 2-axle tracking POP 2.31 kwp* kwp/a** SYSTEM Modultype Modul power output warranty Module product warranty Cell type Inverter module Inverter module guarantee Weight System warranty System selfconsumption per year glass/backsheet 25 years on 80% 10 years monocrystalline on-grid, 1-phase, integrated 5 years 690 kg 24 months approx. < 100 kwh * according to STC standards ** depening on the region DIMENSIONS ALL DIMENSIONS IN MM INSTALLATION 4 fastening points Assembly on earth screws or concrete foundation APPLICATION AREA Temperature range Humidity Maximum altitude Maximum sound pressure level ELECTRICAL CONNECTIONS up to 30 m from 30 m onwards FIXING POINTS / ORIENTATION ACTIVE AREA (KEEP CLEAR) BOTTOM VIEW x 2.5 mm² AWG 14 the local standards must be followed Grid connection must be secured with C16 circuit breaker Windguard incl. 10 m cable length TRACKING, MAX. HEIGHT TRANSPORT POSITION -20 C to +50 C 0 95 % (non condensing) 2,000 m < 50 db (A) outside active zone ø4 windguard on pole 1450 mounting holes TENSILE FORCES*** Anchor points maxtransv. (kn) maxtens. (kn) max Compr. (kn) Appropriate screw foundation Krinner Mounting screws for screw foundation min. length above screw Mounting concrete foundation threaded rod/anchor min. lenght above foundation ***depends on installation site Values on payload level (design values) according to Eurocode. Tensile forces calculated on a max. windspeed of 17.0 m/sec, panel surface area completely fanned, security system failure. Reference according to the assumption of soil class Aue Löslehm, halbfest. If soil class in comparable or better screw foundations as mentioned above are sufficient. If soil class is poorer bigger screw foundations might be necessary. SAFETY POSITIONS SIPO 1 At a wind speed of >53km/h 300 SIPO At a wind speed of >63 km/h

3 MODULE MANUFACTURER PVT-Austria Photovoltaik Technik GmbH Zlabernerstraße 500, 2135 Neudorf bei Staatz, Austria SMARTFLOWER MODULE 1 Nominal Power Pmpp 239 Wp Open Circuit Voltage Uoc V Nominal Voltage Umpp V Nominal Current Impp 8.60 A Short Circuit Current Isc 9.10 A Maximum Power Tolerance +/-3% Current Temperature Coefficient (I SC ) 0.04 %/ C Voltage Temperature Coefficient (U OC ) %/ C Power Temperature Coefficient (P MPP ) -0.40%/ C NOCT 46 C Cells 51 monocrystalline solar cells Cell-Dimensions 6" 156 x 156 mm Bypass Dyodes (per modul) 3 Connector Type & Cables H4 connector, 1 x 4 mm 2 (0.04 x 0.16 inch 2 ) Ambient Temperature Range -25 C C Max. System Voltage UL 750 Vdc Serial Fuse Rating 10 A CELL CONFIGURATION 6 MODULE , ,65 SMARTFLOWER MODULE Nominal Power Pmpp 192 Wp Open Circuit Voltage Uoc V Nominal Voltage Umpp V Nominal Current Impp 8.60 A Short Circuit Current Isc 9.10 A Maximum Power Tolerance +/-3% Current Temperature Coefficient (I SC ) 0.04 %/ C Voltage Temperature Coefficient (U OC ) %/ C Power Temperature Coefficient (P MPP ) -0.40%/ C NOCT 46 C Cells 41 monocrystalline solar cells Cell-Dimensions 6" 156 x 156 mm Bypass Dyodes (per module) 2 Connector Type & Cables H4 connector, 1 x 4 mm 2 (0.04 x 0.16 inch 2 ) Ambient Temperature Range -25 C C Max. System Voltage UL 750 Vdc Serial Fuse Rating 10 A CELL CONFIGURATION 6 MODULE , ,65 SMARTFLOWER MODULE 12 Nominal Power Pmpp 155 Wp Open Circuit Voltage Uoc V Nominal Voltage Umpp V Nominal Current Impp 8.60 A Short Circuit Current Isc 9.10 A Maximum Power Tolerance +/- 3% Current Temperature Coefficient (I SC ) 0.04 %/ C Voltage Temperature Coefficient (U OC ) %/ C Power Temperature Coefficient (P MPP ) -0.40%/ C NOCT 46 C Cells 33 monocrystalline solar cells Cell-Dimensions 6" 156 x 156 mm Bypass Dyodes (per modul) 2 Connector Type & Cables H4 connector, 1 x 4 mm 2 (0.04 x 0.16 inch 2 ) Ambient Temperature Range -25 C C Max. System Voltage UL 750 Vdc Serial Fuse Rating 10 A CELL CONFIGURATION 6 MODULE , ,65 All values are average values, measured at STC. All modules are assembled with standard glass backsheet technology (tempered thin glass with 2.1mm)

4 INVERTER MODULE DATA Country application OMNIK OMNIKSOL-2.5k-TL2-S United Kingdom, Germany, Australia, France, Italy, Spain, Belgium, Czech Rep.,Denmark, Holland, South Africa, Swiss, Poland, Portugal, India, Turkey, Austria, Luxemburg, Slovakia DC Input Data Max. PV-generator power Max. DC voltage 2800 W 500 V MPPT voltage range V Max. DC work current 18 A Number of inputs/mpp trackers 1/1 AC Output Data Nominal AC power Max. AC power Max. AC current Power factor (absolute value) AC connection Grid Voltage Range Grid Frequency Range Grid regulations / Nominal output voltage 2500 W 2750 VA 12.5 A >0.95 (inductive/capacitive) on-grid, single phase V 45-55Hz/55-65Hz VDE-AR-N-4105,VDE , RD1633, C10/11, G83/2, UTE C , AS4777, CEI 0-21, EN50438, NRS 097,VDE0126, N50438, IEC , A1VFR VFR2014 IEC61727,IEC62116 Feed-in phases Max. efficiency 97.7% European efficiency 96.9% MPPT - Efficiency 99.9 % Safety equipment Residual Current Monitoring Unit (RCMU) yes Grid monitoring with Anti - islanding yes Normative references Applicable Standards IEC :2010, EN :2010, DIN EN :2011 IEC :2011, EN :2011, DIN EN :2012 General Data Operative temperature range Relative humidity IP protection class -20/+60 C 0-98% (non condensing) IP65 Topology transformerless Standard warranty For more information 10 years data sheet:

5

6 concrete frostbox