Application Note: String sizing Conext CL Series
|
|
- Joel Mathews
- 6 years ago
- Views:
Transcription
1 : String sizing Conext CL Series Rev A DANGER RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION, AND ARC FLASH This Application Note is in addition to, and incorporates by reference, the installation and operation manual for the Conext CL series photovoltaic grid tie inverters. Before reviewing this Application Note you must read the relevant product manuals. Unless specified, information on safety, specifications, installation, and operation is as shown in the primary documentation received with the product. Ensure you are familiar with that information before proceeding with the information in this application note. Failure to follow these instructions will result in death or serious injury. Abstract This application note provides clarification and methodology for string sizing and an introduction to parameters provided in the inverter data sheet. Due to wide variety of solutions offered by Conext CL or Conext CL-NA inverter model with wiring boxes, understanding of string sizing for the CL inverters is required. This application note also provides information on connecting the PV modules to the CL inverters in a most optimized manner. Scope Scope of this document is to elaborate the string sizing methodology for Conext CL inverter IEC and NA models with combined and separate MPPT modes. Precautions DANGER RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION, AND ARC FLASH String sizing for CL inverters involves high level understanding of PV module and Grid tied inverter behavior. Any person performing this calculation should be qualified and licensed to perform this task. Failure to follow these instructions will result in death or serious injury.
2 Related Documents Conext CL or Conext CL-NA inverter and wiring box specification PV Module data sheet DC string cable specifications. Implementation and Configuration Follow the steps below to calculate the string size. 1. STEP-1: Gather technical information Technical parameters from PV modules Model of PV module to include Maximum Open circuit voltage Maximum array Short circuit current Maximum power point voltage and current Vmp temperature coefficient. Technical parameters from Inverter Full Power MPPT voltage range Operating voltage range Maximum open circuit input voltage Absolute max. Short circuit current per MPPT Single MPPT or multiple MPPT Type of Wiring Box. Weather data Highest and lowest temperature at the location of installation TMY or MET data set for location. 2. STEP-2: Understand and ensure the rules of string sizing Series connected modules should not have more open circuit voltage than maximum Voc limit of inverter. Equation 1: Number of modules per string x Voc (at t min) < inverter Vmax. Parallel connected strings should not conduct more short circuit current in total than Short circuit current rating of inverter (per MPPT). This should include any derating as required by code for defining maximum Isc. Equation 2: Isc strings x 125% < inverter I max. Series connected modules should not have open circuit voltage lower than the lower limit of MPPT voltage range of inverter Rev A
3 Equation 3: Number of modules per string x Vmpp (at t max) > inverter Vmin. 3. STEP-3: Calculate the minimum number of PV modules in Series. 4. STEP-4: Calculate the maximum number of PV modules in Series. 5. STEP-5: Calculate number of strings in Parallel. Use case example: PV Module: A typical 310 Wp Poly crystalline PV module parameters are considered. Inverter: Conext CL 25 kw Inverter. Weather conditions: Maximum high temperature 36 ºC, Minimum low temperature -5 ºC. PV module Vmpp/T Vmp Vmp (70 ºC) 310Wp Poly C-Si PV module -0.34%/ ºC CL-2500NA Vmpp Min (full power) Voc IscPer MPP / Total 25000W Inverter - UL 500 VDC 1000 VDC 36 A/ 72 ADC By defining: Ns min= Number of PV modules in series at least Vmin= Minimum voltage for maximum power point tracking Voc= Open circuit voltage of the panels ᵠ = Coefficient of variation of voltage with temperature Vmp= Voltage at the point of maximum power Tc= Temperature of the cell, Average temperature Tamb= Ambient temperature I inc= Incident radiation (maximum annual average) NOCT= Nominal Operating Cell Temperature Isc nec = Isc of module at STC x 125% Isc = short circuit current of the module at STC STC = Standard Test Conditions (STC) for measurement STC conditions define the irradiation conditions and temperature of the solar cell, widely used to characterize the cells, PV modules and solar generators and are defined as follows: - Irradiance: 1000 W/m 2 - Spectral distribution: Air Mass 1.5 G Rev A 3
4 - Cell temperature: 25 ºC NOCT conditions define the irradiation conditions and temperature of the solar cell, widely used to characterize the cells, PV Modules and solar generators and are defined as follows: - Irradiance: 800 W/m 2 - Spectral distribution: Air Mass 1.5 G - Cell temperature: 20 ºC - Wind speed: 1 m/s Minimum number of PV Modules In order to calculate the Minimum voltage, we must first understand the effect, that a high temperature will have on reducing the PV module Vmp voltage from the data sheet NOCT rating. To determine the temperature of the cell in any situation, use the following formula: Equation 4: Tc = T amb + (I inc (w/m 2 ) * (NOCT-20)/800) Where: Tc = 36 ºC + ((1000) * (47-20) / 800)) = 70 ºC. To determine the temperature of the cell at STC, use the following formula: Equation 5: T=Tc -Tstc Where: T=70 ºC - 25 ºC = 45 ºC. To calculate the Vmp of the module at the site maximum high temperature Equation 6: Vmp (70 ºC) = Vmp (25 ºC) - (T x (Vmp (25 ºC) x Vmpp/T / STC)) Where: Vmp (70 ºC) = V - (45 x (36.40 V x 0.34 / 1000)) = V To maintain full nameplate power, calculate the minimum number of PV modules to be connected in series, using the above data. Equation 7: Ns min = (V min / Vmp min) Where Ns min = (500 / 30.83) = modules ~ 16. This is the minimum amount of PV Modules to be placed in series with each string and ensure the functioning of the inverter at 1000 W/m 2 and 36 C ambient temperature. Maximum number of PV Modules In order to calculate the Maximum voltage, we must first understand the effect that a low temperature will have on reducing the PV module Vmp voltage from the data sheet NOCT rating Rev A
5 Number of strings in parallel Optimum DC-AC ratio Application Note To determine the temperature of the cell in any situation, use the following formula: Equation 8: Tc = T amb + (I inc (w/m 2 ) * (NOCT-20)/800) Where: Tc = -5 ºC + ((1000) * (47-20) / 800)) = -3.6 ºC To determine the temperature of the cell at STC, use the following formula: Equation 9: T=Tc -Tstc Where: T= -3.6 ºC - 25 ºC = ºC. To calculate the Vmp of the module at the site maximum high temperature, Equation 10: Vmp (max) = Vmp (25) ºC - (T x (Vmp (25)ºC x Vmpp/T / STC)) Where: Vmp (max) = V - (-28.6 x (36.40 V x 0.34 / 1000)) = V To maintain full nameplate power, calculate the minimum number of PV modules to be connected in series using the above data. Equation 11: Ns max = (Vmax / Vmax r) Where, Ns min = (1000 / 49.27) = modules ~ 20 This is the maximum amount of PV modules to be placed in series with each string and ensure the functioning of the inverter at 1000 W/m 2 and -5 C ambient temperature. The maximum number of strings installed in parallel and connected to Conext CL inverters, is calculated. For 1 MPPT Input to inverter (up to 8 strings) Equation 12: Number of Strings = Isc Inverter max / (Isc nec Where Number of Strings = 72 A x 9.08 A x 125% = 6.34 strings ~ 6. The DC ratio is based on STC conditions, but doesn't take into account the specific configuration of the project. The performance is a function of location and racking style. For example, a highly optimized system such as a 2-Axis tracker will have a much higher performance advantage compared to a 5 degree fix tilt. Similarly, a strong solar irradiance region will have much higher energy potential than a weaker region. The amount of clipping will be based on the amount of relevant energy available against the inverter nameplate. As clipping exceeds 3%, there may be diminishing value to higher levels of DC ratio. The Conext CL inverter with its wide oversizing range, can be loaded for very high over paneling. We recommend starting with: Rev A 5
6 Shallow Fix tilt (roof mount applications) Steep Fix tilt (ground mount applications) Axis Tracked (ground mount applications) Axis Tracked (ground mount applications) Schneider Electric recommends a limit of 1.5 as maximum. Higher DC ratios requires review by a Schneider Electric applications engineer. Copyright 2015 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. Exclusion for Documentation UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER (A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION; (B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER S RISK; AND (C) REMINDS YOU THAT IF THIS DOCUMENTATION IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT SOLAR.SCHNEIDER-ELECTRIC.COM. Date: July 2015 Revision: Rev A Document Number: Contact Information: solar.schneider-electric.com. For country-specific details, please contact your local Schneider Electric Sales Representative or visit the Schneider Electric Solar Business website at Rev A
Application Note on Power Point Tracking for Conext Core XC and XC-NA Series Inverters
Application Note on Power Point Tracking for Conext Core XC and XC-NA Series Inverters AP-XC-007-EN Revision D DANGER RISK OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This Application Note is in
More informationConext Core XC Series Inverter, 0G-XC-BB: Thermal Derating Application Note
Conext Core XC Series Inverter, 0G-XC-BB: Thermal Derating Application Note AP-XC-089 Revision A DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This document is in addition to, and incorporates
More informationConext CL-60 Inverter Active and Reactive Power Control and LVRT
Conext CL-60 Inverter Active and Reactive Power Control and LVRT http://solar.schneider-electric.com 976-0381-01-01/B March 2017 Application Note EXCLUSION FOR DOCUMENTATION UNLESS SPECIFICALLY AGREED
More informationConext CL125 Inverter - Active and Reactive Power Control and LVRT/HVRT
Conext CL125 Inverter - Active and Reactive Power Control and LVRT/HVRT http://solar.schneider-electric.com 976-0406-01-01/A May 2018 Application Note EXCLUSION FOR DOCUMENTATION UNLESS SPECIFICALLY AGREED
More informationConext CL-60E Inverter
Conext CL-60E Inverter Solution Guide for Decentralized PV Systems solar.schneider-electric.com Copyright 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries
More informationUnderstanding Temperature Effects on Crystalline PV Modules
Understanding Temperature Effects on Crystalline PV Modules The following is a discussion on temperature and how it affects solar module voltages and power output. This is particularly important in solar-battery
More informationString Configuration Tool Help!
String Configuration Tool Help! (Siento, esto solo está en inglés) 1 Intended Use and Disclaimer Thank you for using the Fronius String Configuration Tool ( FSC Tool ) for North America. Fronius USA provides
More informationUpsolar Smart Modules
Upsolar Smart Modules Optimized by Energy Improve ROI with No Upfront Cost Smart Modules optimized by Energy deliver more energy, active management and enhanced safety through state-ofthe-art module-embedded
More information60 cell LG300N1K-G4. Key Features. High Power Output. Enhanced Performance Warranty. Outstanding Durability. Aesthetic Roof
EN LG300N1K-G4 60 cell LG s new module, NeON 2 Black, adopts Cello technology. Cello technology replaces 3 busbars with 12 thin wires to enhance power output and reliability. NeON 2 Black demonstrates
More informationApplication Note: Grid Settings by Utility Region for the Conext Core XC Series
Application Note: Grid Settings by Utility Region for the Conext Core XC Series AP-XC-014-EN Revision A Scope This application note lists the default grid settings based on which Utility Region is selected
More informationGRID-CONNECTED SOLAR PV SYSTEMS. Design Guidelines for Accredited Installers NO BATTERY STORAGE. January 2013 (Effective 1 February 2013)
GRID-CONNECTED SOLAR PV SYSTEMS NO BATTERY STORAGE Design Guidelines for Accredited Installers January 2013 (Effective 1 February 2013) These guidelines have been developed by Clean Energy Council. They
More informationConext CL Three Phase Grid Tie Inverters Conext CL NA Conext CL NA
Conext CL Three Phase Grid Tie Inverters Conext CL 18000 NA Conext CL 25000 NA Installation and Operation Manual www.sesolar.com Conext CL Three Phase Grid Tie Inverters Conext CL 18000 NA Conext CL 25000
More informationBETTER DESIGN BETTER MATERIALS BETTER PROCESSES BETTER MODULES
BETTER DESIGN BETTER MATERIALS BETTER PROCESSES BETTER MODULES TM FULL RANGE OF CERTIFIED MODULES Mono Crystalline Watt to 50 Watt Poly (Multi) Crystalline Watt to 80 Watt Glass Cells High Efficiency A-Grade
More informationFSEC APPROVAL # XL15-NT
AC GEC 4 IN SERIES TO UTILITY METER IN SERIES F-2 35A SW 60A SOLAR MODULE POWER BOX PM-25 270W 2 3 4 JUNCTION BOX 2 7 INVERTER I 6,000W 5 6 3 TO MAIN SERVICE ENTRANCE RE F. MODULES FSEC APPROVAL # XL5-NT90-02
More informationHow to Evaluate PV Project Energy Yield
How to Evaluate PV Project Energy Yield There are three main characteristics of a PV module that could affect the real energy generation of a PV plant: Temperature coefficient; Low light performance; IAM
More informationGrowatt 2000TL. Input Data Max. DC power Max. DC voltage. PV voltage range MPPT. Full load MPP-Voltage range
Growatt 2000TL Maximum efficiency of 97% and wide inpunt voltage range Internal DC switch Transformerless GT topology Compact design Multi MPP controller MTL - String Bluetooth / RF technology / ZigBee
More informationOptional Features. Linear Performance Warranty 10 Years product warranty 25 Years linear performance warranty
Those who dream of a better future can help lead to a more meaningful and enriched world. As a leading solar module manufacturer in Korea, we never stop to achieve competitiveness through differentiation,
More informationKIT SOLAR ANET O QUÉ INCLUYE? QUÉ PUEDES CONECTAR? Nevera combi. Televisión. 25 Bombillas. Bomba de presión. Cargador
KIT SOLAR ANET O 7500 Wh/día QUÉ PUEDES CONECTAR? QUÉ INCLUYE? 9 Módulos FV T RINA SOLAR 255Wp Policristalino (3 Estructuras incluidas) 24 Baterías T URBO ENERGY 8 SOPZS 1400 1 Inversor/cargador/regulador
More informationEngineering Thesis Project. By Evgeniya Polyanskaya. Supervisor: Greg Crebbin
Simulation of the effects of global irradiance, ambient temperature and partial shading on the output of the photovoltaic module using MATLAB/Simulink and ICAP/4 A report submitted to the School of Engineering
More informationPower-One Aurora PLUS and PLUS-HV Series Inverters: guide to the sizing of photovoltaic generators with Aurora Designer and PowerOne String Tool
Power-One Aurora PLUS and PLUS-HV Series Inverters: guide to the sizing of photovoltaic generators with Aurora Designer and PowerOne String Tool Author: Gianluca Marri Approver: Antonio Rossi Date: 2012/05/03
More informationUnderstanding Potential Induced Degradation for LG NeON Model
Understanding Potential Induced Degradation for LG NeON Model Table of Contents 2 CONTENTS 1. Introduction 3 2. PID Mechanism 4 3. LG NeON model PID Characterization 5 4. Description 7 6. Test Result 11
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Elgar TerraSAS 1kW-1MW Programmable Solar Array Simulator Simulate dynamic irradiance and temperature ranging from a
More informationTraditional PWM vs Morningstar s TrakStar MPPT Technology
Traditional PWM vs Morningstar s TrakStar MPPT Technology Morningstar s MPPT charge controllers use our patented TrakStar advanced control MPPT algorithm to harvest maximum power from a Solar Array s peak
More informationLaboratory 2: PV Module Current-Voltage Measurements
Laboratory 2: PV Module Current-Voltage Measurements Introduction and Background The current-voltage (I-V) characteristic is the basic descriptor of photovoltaic device performance. A fundamental understanding
More informationDr E. Kaplani. Mechanical Engineering Dept. T.E.I. of Patras, Greece
Innovation Week on PV Systems Engineering and the other Renewable Energy Systems. 1-10 July 2013, Patras, Greece Dr E. Kaplani ekaplani@teipat.gr Mechanical Engineering Dept. T.E.I. of Patras, Greece R.E.S.
More informationPerformance Loss of PV systems. Giorgio Belluardo
Performance Loss of PV systems Giorgio Belluardo Content Importance of accurate estimation of PL Mechanisms behind performance loss Statistics Methodologies to assess PLR Novel method for estimation of
More informationType EN180-MS EN185-MS EN190-MS EN195-MS EN200-MS 13.5 A. Container Capacity Multiple Packing 40 feet (GP) 700 pcs / 28 pallets
Quality criteria and certificates IEC 61215, IEC 61730, CE-Certification, ISO 9001 and ILB-ISO 14001 Tolerance of nominal power (PMPP) 0+5%; classification range is ±2.5W 10 years product-warranty 5 years
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.
More informationConext Core XC-NA Series Grid Tie Photovoltaic Inverter and DC Recombiner
www.schneider-electric.com Conext Core XC-NA Series Grid Tie Photovoltaic Inverter and DC Recombiner Operation and Maintenance Manual www.schneider-electric.com Conext Core XC-NA Series Grid Tie Photovoltaic
More informationHigh Brightness LED, Ø 5 mm Untinted Non-Diffused Package
VLCS513 High Brightness LED, Ø 5 mm Untinted Non-Diffused Package DESCRIPTION 19223 The VLC.51.. series is a clear, non-diffused 5 mm LED for high end applications where supreme luminous intensity and
More informationPerformance of high-eciency photovoltaic systems in a maritime climate
Loughborough University Institutional Repository Performance of high-eciency photovoltaic systems in a maritime climate This item was submitted to Loughborough University's Institutional Repository by
More informationYour Origin SLIVER system will be supplied with one of the following sets of panels:
SLIVER3000 Solar System Panel Specifications Your Origin SLIVER system will be supplied with one of the following sets of panels: Manufacturer Mono Or Poly Size (Watts) Panels Required To Achieve Minimum
More informationSOLAR PV MICROINVERTER/ACM STANDARD PLAN - COMPREHENSIVE Microinverter and ACM Systems for One- and Two- Family Dwellings
SOLAR MICROINVERTER/M STANDARD PLAN - COMPREHENSIVE Microinverter and M Systems for One- and Two- Family Dwellings SCOPE: Use this plan ONLY for systems using utility-interactive Microinverters or Modules
More informationAluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar
Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar FEATURES Long useful life: 6000 h at +105 C Specified for 500 V, 50 C operation High ripple current capability High reliability
More informationCP /240-MC4 User Manual
CP-250-60-208/240-MC4 User Manual Chilicon Power LLC Jan 2014 1 CONTENTS Important Safety Instructions... 3 Safety Instructions... 3 CP-250 Microinverter System Introduction... 4 Inverter Label Information...
More informationArray. Source-circuit configuration is arguably the most
Array Source-circuit configuration is arguably the most important aspect of PV system design. The electrical and mechanical characteristics of a PV array follow from this fundamental design decision, which
More informationSilicon PIN Photodiode
BPVNF Silicon PIN Photodiode DESCRIPTION 640- BPVNF is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive area detecting visible
More informationBasic Information Required for Photovoltaic Plan Check Submittal *Informational Purposes Only* 2013 CEC
BUILDING AND SAFETY DIVISION 1685 MAIN STREET, SANTA MONICA, CA 90401 310-458-2201 Basic Information Required for Photovoltaic Plan Check Submittal *Informational Purposes Only* 2013 CEC ADMINISTRATIVE
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34FAS VBPW34FASR 21726 VBPW34FAS and VBPW34FASR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5
More informationResistor LED for 12 V Supply Voltage
TLRH44.CU, TLRO44.CU, TLRY44.CU, TLRG44.CU, TLRP44.CU Resistor LED for 12 V Supply Voltage V S DESCRIPTION 19228-2 Out 19228-1 These devices are developed for the automotive industry and other industries
More informationQuality criteria and certificates
Quality criteria and certificates IEC 61215, IEC 61730, CE-Certification, ISO 9001 and ILB-ISO 14001 Tolerance of nominal power (PMPP) 0+5%; classification range is ±2.5W 10 years product-warranty 5 years
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a silicon PIN photodiode with high radiant sensitivity in clear, T-1 plastic package. It is sensitive to visible and near infrared radiation. FEATURES Package type:
More informationPLOT PLAN INSTRUCTIONS ROOF MOUNT SOLAR AN ACCURATE PLOT PLAN IS NECESSARY TO PROCESS YOUR PERMIT
PLOT PLAN INSTRUCTIONS ROOF MOUNT SOLAR Building Division 1855 Placer Street, Suite 102 Redding, California 96001 Phone: (530) 225-5761 Fax: (530) 245-6468 Inspection Request Line: (530) 244-5068 Web:
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBPW34S VBPW34SR 21733 VBPW34S and VBPW34SR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a 7.5 mm 2 sensitive
More informationInfrared Emitting Diode, RoHS Compliant, 950 nm, GaAs
DESCRIPTION 94 8638 is an infrared, 95 nm emitting diode in GaAs technology molded in a miniature, clear plastic package without lens. FEATURES Package type: leaded Package form: T-¾ Dimensions (in mm):
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with enhanced sensitivity for visible light. It is a low profile surface-mount device (SMD) including the chip with
More informationNew Tools for PV Array Commissioning and Troubleshooting
New Tools for PV Array Commissioning and Troubleshooting November 10, 2011 Paul Hernday Applications Engineer paul@solmetric.com cell 707-217-3094 Bryan Bass R&D Engineer bryan@solmetric.com Solmetric
More informationSilicon PIN Photodiode, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q101 Released
Silicon PIN Photodiode, RoHS Compliant, Released for Lead (Pb)-free Reflow Soldering, AEC-Q1 Released 20535_1 DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a miniature surface mount
More informationTUV Rheinland (India) Pvt. Ltd. Product Safety & Quality. Test Report
TUV Rheinland (India) Pvt. Ltd. Product Safety & Quality Test Report Photovoltaic module Testing TÜV Report No. 19630304.001 Bangalore, JULY 2015 Certificate No. T -1543 2 / 8 Contents CONTENTS... 2
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a silicon PIN photodiode with high radiant sensitivity in clear, T-1 plastic package. It is sensitive to visible and near infrared radiation. FEATURES Package type:
More informationAPPENDIX V PRODUCT SHEETS
National Institutes of Health Building 37 Modernization Bethesda, Maryland APPENDIX V PRODUCT SHEETS Katie L. McGimpsey Mechanical Option 1 of 4 BP 4160 160-Watt Monocrystalline Photovoltaic Module The
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with a highly linear photoresponse. It is a low profile surface mount device (SMD) including the chip with a 0.23 mm
More informationSilicon PIN Photodiode, RoHS Compliant
Silicon PIN Photodiode, RoHS Compliant DESCRIPTION 948642 is a high sensitive silicon planar photodiode in a standard TO-18 hermetically sealed metal case with a glass lens. A precise alignment of the
More informationEE Grid-Tied PV Systems. Y. Baghzouz Spring 2011
EE 495-695 Grid-Tied PV Systems Y. Baghzouz Spring 2011 Applicable Codes & Standards Most Important: NEC IEEE Std 1547 Summary of Content of NEC NEC (Voltage Drop Requirement) NEC requires that the voltage
More informationSOLARONIX. Solixon A-1525-V
SOLARONIX Solixon A-1525-V Based on Solaronix' exclusive light engine, our solar simulation equipment delivers a perfect and continuous artificial sunlight 24/7, allowing for accurate stability and performance
More informationSilicon PIN Photodiode, RoHS Compliant
BPW83 DESCRIPTION 94 8490 BPW83 is a PIN photodiode with high speed and high radiant sensitivity in a black, side view plastic package with daylight blocking filter. Filter bandwidth is matched with 870
More informationIR Sensor Module for Remote Control Systems
TSOP98238 IR Sensor Module for Remote MECHANICAL DATA Pinning: 1 = Carrier OUT, 2 = GND, 3 = V S 19026 FEATURES Photo detector and preamplifier in one package AC coupled response from 30 khz to 50 khz,
More informationHEF4049B-Q General description. 2. Features and benefits. 3. Applications. Hex inverting buffers
Rev. 3 17 June 2016 Product data sheet 1. General description The provides six inverting buffers with high current output capability suitable for driving TTL or high capacitive loads. Since input voltages
More informationInfrared Emitting Diode, 950 nm, GaAs
TSUS54, TSUS541, TSUS542 Infrared Emitting Diode, 95 nm, DESCRIPTION 94 839 TSUS54 is an infrared, 95 nm emitting diode in technology molded in a blue-gray tinted plastic package. FEATURES Package type:
More informationDesign and Development of Solar Roof Top PV Power Systems
RESEARCH ARTICLE Design and Development of Solar Roof Top PV Power Systems Y. Pradeep Kumar 1, V.Tejaswitha 2 1 Assistant Professor, Dept. of ECE, Madanapalle Institute of Technology & Science, Madanapalle,
More informationTECHNICAL DATA SHEET. smartflower POP. As of: August 2015 Typing and printing errors reserved.
TECHNICAL DATA SHEET smartflower POP. TECHNICAL DATA POWER OUTPUT Nominal output Output through 2-axle tracking POP 2.31 kwp* 3.400 5.700 kwp/a** SYSTEM Modultype Modul power output warranty Module product
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is matched with IR emitters
More informationHigh Efficiency Blue LED in Ø 3 mm Tinted Diffused Package
High Efficiency Blue LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been redesigned in 1998 replacing SiC by GaN technology to meet the increasing demand for high efficiency blue
More informationSupplemental Calculation Sheets for Inverter #2
Solar PV Standard Plan Simplified Central/String Inverter Systems for One and TwoFamily Dwellings (10 KW or Less) Supplemental Calculation Sheets for Inverter #2 FORM PV 3S DC Information: Module Manufacturer:
More informationSilicon PIN Photodiode
BPVNF Silicon PIN Photodiode DESCRIPTION 640- BPVNF is a PIN photodiode with high speed and high radiant sensitivity in black, T-¾ plastic package with daylight blocking filter. Filter bandwidth is matched
More informationZener Diodes FEATURES
ZPYV9 to ZPY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT FEATURES Silicon planar power Zener diodes For use in stabilizing and clipping circuits with high power rating The Zener voltages
More informationSilicon PIN Photodiode
Silicon PIN Photodiode 20043- DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a miniature surface mount device (SMD) including the chip with a 0.23 mm 2 sensitive area and a daylight
More informationResistor LED for 12 V Supply Voltage
Resistor LED for 12 V Supply Voltage V S 19228-2 Out 19228-1 FEATURES With current limiting resistor for 12 V Cost effective: save space and resistor cost Standard Ø 3 mm (T-1) package High luminous intensity
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode with a highly linear photoresponse. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a silicon PIN photodiode with high radiant sensitivity in clear, T-1 plastic package. It is sensitive to visible and near infrared radiation. FEATURES Package type:
More informationHigh Intensity LED in Ø 3 mm Tinted Diffused Package
High Intensity LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm diffused plastic package.
More informationWe are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists. International authors and editors
We are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists 4, 116, 12M Open access books available International authors and editors Downloads Our authors
More informationLOCMOS (Local Oxidation CMOS) to DTL/TTL converter HIGH sink current for driving two TTL loads HIGH-to-LOW level logic conversion
Rev. 11 23 June 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The provides six inverting buffers with high current output capability suitable
More informationReference: Photovoltaic Systems, p
PV systems are comprised of building blocks of cells, modules and arrays to form a DC power generating unit with specified electrical output. Reference: Photovoltaic Systems, p. 115-118 Reference: Photovoltaic
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION is a high speed and high sensitive PIN photodiode. It is a small surface mount device (SMD) including the chip with a 0.85 mm 2 sensitive area and a daylight blocking
More informationHigh Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero
Vishay Semiconductors High Speed Infrared Emitting Diode, DESCRIPTION 94 8389 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
More informationModelling and simulation of PV module for different irradiation levels Balachander. K Department of EEE, Karpagam University, Coimbatore.
6798 Available online at www.elixirpublishers.com (Elixir International Journal) Electrical Engineering Elixir Elec. Engg. 43 (2012) 6798-6802 Modelling and simulation of PV module for different irradiation
More informationFGH40N60SFDTU-F V, 40 A Field Stop IGBT
FGH40N60SFDTU-F085 600 V, 40 A Field Stop IGBT Features High Current Capability Low Saturation Voltage: V CE(sat) = 2.3 V @ I C = 40 A High Input Impedance Fast Switching RoHS Compliant Qualified to Automotive
More informationPerformance Evaluation, Simulation and Design Assessment of the 56 kwp Murdoch University Library Photovoltaic System
School of Engineering and Energy ENG460 Engineering Thesis 2011 Performance Evaluation, Simulation and Design Assessment of the 56 kwp Murdoch University Library Photovoltaic System Stephen Rose 30658774
More informationZener Diodes FEATURES
ZMYV9 to ZMY Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom..9 to V FEATURES Silicon planar power Zener diodes For use in stablilizing and clipping circuits with high power rating
More informationBicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package
Bicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package TLSV5 96496 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 2.5 mm x 5 mm symbol Product series: bicolor Angle of half intensity:
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION VBP104FAS VBP104FASR 21726-1 VBP104FAS and VBP104FASR are high speed and high sensitive PIN photodiodes. It is a surface mount device (SMD) including the chip with a
More informationConext Automatic Generator Start
Conext Automatic Generator Start Owner s Guide 975-0307-01-01 Rev G 08-2015 Manual Type solar.schneider-electric.com Conext Automatic Generator Start Owner s Guide solar.schneider-electric.com Copyright
More informationSilicon PIN Photodiode
VEMD550C Silicon PIN Photodiode DESCRIPTION VEMD550C is a high speed and high sensitive PIN photodiode. It is a low profile surface-mount device (SMD) including the chip with a 7.5 mm 2 sensitive area
More informationInfrared Emitting Diode, 950 nm, GaAs
Infrared Emitting Diode, 95 nm, CQY37N DESCRIPTION 94 8638-2 CQY37N is an infrared, 95 nm emitting diode in technology molded in a miniature, clear plastic package with lens. FEATURES Package type: leaded
More informationIR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems 1 2 DESIGN SUPPORT TOOLS Models Available MECHANICAL DATA 3 Pinning: 1 = GND, 2 = Carrier OUT, 3 = V S 94 8691 click logo to get started FEATURES Photo detector
More informationHigh Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 83 nm, GaAlAs Double Hetero 94 8389 DESCRIPTION is an infrared, 83 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed,
More informationSilicon PIN Photodiode, RoHS Compliant
BPW83 DESCRIPTION 94 8490 BPW83 is a PIN photodiode with high speed and high radiant sensitivity in a black, side view plastic package with daylight blocking filter. Filter bandwidth is matched with 870
More informationTLRG4420CU, TLRH4420CU, TLRO4420CU, TLRY4420CU Resistor LED for 12 V Supply Voltage
TLRG442CU, TLRH442CU, TLRO442CU, TLRY442CU Resistor LED for 12 V Supply Voltage V S DESCRIPTION 19228-2 Out 19228-1 These devices are developed for the automotive industry with special requirements as
More informationSilicon Phototransistor in 0805 Package
Silicon Phototransistor in 85 Package 243 DESCRIPTION is a high speed silicon NPN epitaxial planar phototransistor in a miniature 85 package for surface mounting on printed boards. The device is sensitive
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8633 BPV23NF is a PIN photodiode with high speed and high radiant sensitivity in a black, plastic package with side view lens and daylight blocking filter. Filter
More information9. Grid-Connected of Photovoltaic Systems
9. Grid-Connected of Photovoltaic Systems H. Boileau Savoie University, FR Learning outcomes After reading this chapter, the user should possess knowledge of: A core description of PV systems connected
More informationDual Photovoltaic MOSFET Driver Solid-State Relay
Dual Photovoltaic MOSFET Driver Solid-State Relay i179034_2 SMD DIP DESCRIPTION - Control 1 + Control 1 - Control 2 + Control 2 8 7 6 5 1 2 3 4 + Control 1 - Control 1 + Control 2 - Control 2 The VO1263AB
More informationIR Sensor Module for Remote Control Systems
IR Sensor Module for Remote Control Systems MECHANICAL DATA Pinning: 1 = Carrier OUT, 2 = GND, 3 = V S 19026 FEATURES Photo detector and preamplifier in one package AC coupled response from 30 khz to 50
More informationSilicon PIN Photodiode
BPV Silicon PIN Photodiode DESCRIPTION 94 8390 BPV is a PIN photodiode with high speed and high radiant sensitivity in clear, T-¾ plastic package. It is sensitive to visible and near infrared radiation.
More informationHigh Speed Infrared Emitting Diode, 830 nm, GaAlAs Double Hetero
High Speed Infrared Emitting Diode, 83 nm, GaAlAs Double Hetero 26 DESCRIPTION is an infrared, 83 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high speed, molded
More informationThis document contains TDS for the following products: ReneSola Australia Virtus II Module W 4BB
This document contains TDS for the following products: Virtus II Module 55-70W 4BB ReneSola Australia Virtus II Module 60-70W 4BB Virtus II Module 55-70W 4BB 1000V US Virtus II Module 55W 60W 65W 70W High
More informationSilicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8633 BPV22NF is a PIN photodiode with high speed and high radiant sensitivity in a black, plastic package with side view lens and daylight blocking filter. Filter
More informationTraditional PWM vs. Morningstar s TrakStar MPPT Technology
Traditional PWM vs. Morningstar s TrakStar MPPT Technology Introduction: Morningstar MPPT (Maximum Power Point Tracking) controllers utilize Morningstar s own advanced TrakStar Maximum Power Point Tracking
More information