Engineering the high quality cost effective solutions. Short form selection catalogue

Transcription

1 Engineering the high quality cost effective solutions Short form selection catalogue

2 19 Rack mountable systems NML offers variety of upconverters, downconverters, multicouplers, synthesisers for various applications. Satellite Communication Weather Radar Civil Aviation Radar Defence application Simulation equipment Medical electronics Civil/Govt security application Counter measure/ Jamming technology Broadcast University research Phase noise offered on these products is exceptionally better than then IESS308/309 phase noise mask. band RF Input / Output UPCONVERTERS IF L -Band >18 70/140 S - Band >18 70/140 C - Band >18 70/140 X - Band >18 70/140 Ku - Band >18 70/140 band RF Input / Output Step Size [khz] DOWNCONVERTERS IF L -Band >18 70/140 S - Band >18 70/140 C - Band >18 70/140 X - Band >18 70/140 Ku - Band >18 70/140 Step Size [khz] Attenuation Range in 1 and 10 Steps Attenuation Range in 1 and 10 Steps band RF ACTIVE 4 WAY EQUAL DIVIDERS No Damage power level [watts] Port to Port Isolation Attenuation Range P1 L -Band >60 31 >15 >10 >20 S - Band >60 31 >15 >10 >20 C - Band >55 31 >15 >10 >20 X - Band >50 31 >15 >10 >18 Ku - Band >50 31 >15 >10 >18 Return Loss

3 19 Rack mountable systems SWITCH MATRIX We offer switch matrices as standard for IF and RF Switching. For IF we offer 70 ± 20MHz or 140 ± 20MHz which complements our upconverters and downconverters range. Please contact us on for your custom/bespoke requirements. IF Switch Matrix 70/140MHz Matrix Type Insertion Loss Port to port Isolation Input power P1dB 4X4 <0.75 >20 > X8 <1.00 >20 >60 30 RF SWITCH MATRIX Matrix Type Freq. Range Insertion Loss Port to port Isolation 2X <2.0 >18 >40 4X <3.0 >23 >40 8X <5.5 >23 >35 AMPLIFIERS We offer wide band low noise and high power amplifiers for various applications as shown below: Low noise Wide band Low Noise Low Noise Power RF Input / Output Noise Figure P1 Flatness >18 <1.8 >30dB >15 ± >18 <1.2 >30dB >10 ±1 High Power RF P sat Input/output Flatness :1 >55 >45 ± :1 >50 >45 ± :1 >30 >33 ±3 CUSTOM EQUIPMENTS We specialise in designing bespoke test equipment for various application field. Following equipment was designed for medical electronics or cancer research. We can design similar or modified version of this systems. Power level [Watts] Output BW Attenuation range Stability [ppm] 2998 >300 >20 ± 6 31 ±2 PLEASE NOTE: All our 19 Rack mountable systems have following features as standard: Interfaces Power Supply Temperature [ C] Humidity RS232 TCP/IP RS422/RS485 VAC % non-condensing If you have a custom specification, then please feel free to contact us on: sales@nml.eu.com Website: Telephone:

4 RF/MICROWAVE MODULES NML offers variety of connectorised/aluminium housed RF modules for various sections of the systems to ease the systems integration by systems designers. We also offer capability to design a customer size module which could be a new design or to be used to form fit an obsolete part. Defence Radar Cellular/WIMAX base stations Satellite Communications Weather Radar Aeronautical Navigation Radio Location Medical electronics Civil/Govt security application Counter measure/jamming technology Broadcast We offer wide band low noise and high power amplifiers for various applications as shown below: Wide band Low Noise Low Noise RF LOW NOISE AMPLIFIERS Input / Output Noise Figure P1 Flatness >18 <1.8 >30dB >15 ± >18 <1.2 >30dB >10 ±1 and Phase matched Dual Channel Power Matrix Type DUAL CHANNEL GAIN AND PHASE MATCHED LOW NOISE AMPLIFIER 3 Switch Filtered outputs 500 to to to 710 Range RF Input / Output Return Loss Noise Figure P1dB Flatness Match between 2 amplifiers Phase Match between 2 amplifiers [deg] >15 <4 >12 >10 ±1 ±0.5 <±3 HIGH POWER AMPLIFIER Input/output Psat Flatness 2 6 2:1 >50 >45 ± :1 >30 >33 ±3 Insertion Loss Return Loss RF SWITCH MATRIX Port to port Isolation Input Power Level Connectors 2X <2.0 >18 >40 33 SMA 4X <3.0 >23 >40 33 SMA 8X <5.5 >23 >35 33 SMA HIGH POWER LIMITER We offer limiters for various bands for receiver protection for different applications such as radars, base stations etc RF Insertion Loss Power PW and 1msec PRI Input / Output connector :1 2kW SMA/Tab/Pin

5 RF RF/MICROWAVE MODULES BROADBAND DETECTOR LOG VIDEO AMPLIFIER WITH BUILT IN AMPLIFIER 2-6 GHz Flatness TSS Dynamic range Log Slope [mv/db] Log Linearity Input signal PW [ns] ± to 0 70 ±1 100 to CW <25 <60 Rise time [ns] Sett. time [ns] PHASE LOCKED DIELECTRIC RESONATOR ranges Input/ Typical Pout External reference DC Supply Typical Phase Noise for PLDRO output 1MHz :1 > / DUAL PLL SYNTHESISED OSCILLATOR We offer dual PLL synthesised oscillator as a fully populated board and as well as fully connectorised and aluminium housed module for plug and play into a bigger systems. ranges between Input/ output Typical Pout Local oscillator 1 Typical Pout Local oscillator 2 1kHz Typical Phase Noise for 1MHz :1 >10 >8 ± If you have a custom specification, then please feel free to contact us on: sales@nml.eu.com or Website: Telephone:

6 We look forward to do business with you