500W X-Band, 1:2 Redundant System in the 4RU chassis, with N+1 redundant power supplies

Transcription

1 400W, 1:1 Redundant System in the 4RU chassis, with optional N+1 redundant power supplies DESCRIPTION 500W, 1:2 Redundant System in the 4RU chassis, with N+1 redundant power supplies 200W 1:1 Redundant System in the 3RU Chassis, with optional N+1 redundant power supplies FEATURES Teledyne Paradise Datacom s Indoor Rack Mount (-RM) series of redundant amplifier systems provide the highest degree of earth station redundancy and reliability. These systems can be configured in either 1:1 or 1:2 redundant configurations using any of the Teledyne Paradise Datacom family of Indoor Rack Mount SSPAs. The RCP2-1100/1200 System Controller front panel mimic display shows the current switch positions and the on-line amplifiers. Dedicated fault lights provide easy indication of system status. All RCP2-1100/1200 monitor and control is available locally, at the front panel LCD display, as well as remotely by the RS-232 or RS-485 interface ports. System Output Power to: 1.1 kw 1.0 kw 600 kw S-Band 500 W Ku Band Universal Input, Power Factor Corrected Power Supply Output Power Monitoring Separate 1 RU Redundant Controller for 1:2 systems Controller-less solutions for 1:1 systems OPTIONS Controller-less 1:2 System Reflected Power Alarm L-Band Input operation Cold Standby Amplifier Operation External Exhaust Air Ducting Kit Custom Configurations Teledyne Paradise Datacom LLC Teledyne Paradise Datacom Ltd. 328 Innovation Blvd., Suite 100 2&3 The Matchyns, London Road, Rivenhall End State College, PA 16803, USA Witham CM8 3HA United Kingdom Tel: (814) Tel: +44(0) Fax: (814) Fax: +44(0) OF 12

2 3RU SSPA Chassis Output Power Levels S-Band: 50W - 300W : 25W - 300W : 60W - 200W : 10W - 150W 3 RU Chassis includes integrated AC-DC power supply 4RU SSPA Chassis Output Power Levels S-Band: 50W - 500W : 50W - 600W : 60W - 500W : 25W - 250W 4 RU Chassis includes integrated AC-DC power supply 6RU & 7RU SSPA Chassis Output Power Levels : 800W kw : 700W kw : 400W - 500W 6RU & 7RU Chassis use separate, 1RU power supply chassis. Power Supply is a redundant, N+1, chassis. Only 3 of 4 power supply modules required to operate the SSPA with 1 hot standby. Power Supply modules are front panel hot swappable. 2 OF 12

3 Gain Gain Flatness Gain Slope Gain Variation vs. Temperature Gain Adjustment minimum full band (except Extended ) Extended units per 40 MHz (C-,X-,Ku-bands) per 10 MHz (S-band) 0 C to +50 C 0.1 resolution Common System Specifications PARAMETER NOTES LIMITS UNITS 70 ± 1.0 ± 1.5 ± 0.3 ± 0.2 ± /40 MHz /10 MHz Intermodulation Distortion 3 back off relative to P 1-25 c AM/PM Conversion (@ rated P 1 ) 3.5 / (@P 1-3) 0.5 / Spurious Harmonics (@ rated P 1 ) (@ rated P 1-3)(C-,X-,Ku-bands) (@ rated P 1-3) (S-band) c c c Input / Output VSWR 1.50:1 Noise Figure at maximum gain 12 Group Delay (per 40 MHz segment) Noise Output Residual AM Noise Residual Phase Noise Mechanical Size 3 RU SSPA Chassis 4 RU SSPA Chassis 6 RU SSPA Chassis 7 RU SSPA Chassis 1RU Power Supply Chassis Weight 3RU SSPA Chassis 4RU SSPA Chassis 4RU SSPA Chassis 6RU SSPA Chassis 7RU SSPA Chassis 1RU Power Supply Chassis Linear Parabolic Ripple TX Band (S-,C-,X- or Ku-bands) RX Band (C- or Ku-bands) RX Band (X-band) RX Band (S-band) 0-10 KHz 10 KHz KHz 500 KHz - 1 MHz Offset frequency from carrier 10 Hz 100 Hz 1 khz 10 khz 100 khz 1 MHz width x height x depth 250W Chassis > 250W Chassis (see below) ( log F) x 5.22 x (483 x 133 x 613) 19.0 x 7.0 x 28.0 (483 x 178 x 711) 19.0 x x 30.0 (483 x 266 x 762) 19.0 x x 30.0 (483 x 310 x 762) 19.0 x 1.75 x (483 x 44 x 409) 66 (30) 75 (34) 100 (45) 180 (82) 180 (82) 29 (13) ns/mhz ns/mhz 2 ns p-p W/4 KHz W/4 KHz W/4 KHz c c c inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) Finish powder coat Gray Environmental Operating Temperature Ambient 0 to +50 C Relative Humidity Condensing 95 % Cooling System Integrated Forced air S-Band Receive Band Noise and Filter Option Receive Band Reject Filter Filter integrated into SSPA chassis through 400W output; 500W SSPAs require external filter Receive Band Noise Power Density Insertion Loss Rx GHz Rx GHz Without optional filter With optional filter c c w/4 KHz w/4 KHz 3 OF 12

4 L-Band Operation Teledyne Paradise Datacom offers integrated L-Band Block Up Converters in C-, X-, and Ku- Band amplifiers in all rack-mountable configurations. The L-Band units utilize Teledyne Paradise Datacom s proprietary zbuc TM technology. The addition of a zbuc converter to a Rack Mountable SSPA system typically increases the gain by 2-4. The advantages of zbuc TM technology include: zbuc converter can detect and switch to an extenally supplied reference. Optional internal high stability (10MHz) reference. zbuc converter can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification. zbuc converter can accept a wide range of external reference power (-10 to +5 m) zbuc converter can accept FSK monitor and control signal via the IFL for complete amplifer remote control. Available Frequency Plans Band Frequency Band IF Input LO Frequency RF Output C Standard MHz GHz GHz C Extended MHz GHz GHz C Palapa Band MHz GHz GHz C Insat Band MHz GHz GHz C Extended MHz GHz GHz X Standard MHz GHz GHz Ku Standard MHz GHz GHz Ku Extended MHz GHz GHz Electrical Specifications for RM SSPA System with ZBUC TM converter PARAMETER NOTES LIMITS UNITS Gain Gain Flatness Gain Slope Gain Adjusted Range Gain Stability Phase Noise Spurious Nominal setting full band (C-,X-,Ku-bands) per 40 MHz (C-,X-,Ku-bands) Typical Adj. Range Typical Adj. Range 0 to +50 C Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz Absolute max In-Band Signal Related (C-/) (Extended ) Close to Carrier Spurious (< 20 MHz) Local Oscillator C-band (typ.) ± 2.0 ± ± 1.5 X-band (typ.) Ku-band (typ.) /40 MHz Noise Figure At 75 gain setting 20 Input VSWR L-Band 1.5 : 1 Internal Reference Option Reference 25 C Reference Stability over Temperature (-40 to +90 C) ± ± Gain Change c c c m 4 OF 12

5 Indoor Redundant System Physical Configurations Redundant Control Panels RCP :1 Redundant Controller Block Diagram, 1:1 Redundant System Block Diagram, 1:2 Redundant System RCP :2 Redundant Controller 5 OF 12

6 P/N : L X SW1 J21 J22 SW2 J2 PS2 RCP :2 REDUNDANT SYSTEM CONTROLLER HPAK W Ku-BAND POWER RF INPUT SAMPLE PS1 P /N: L X HPAK W Ku-BAND POWER RF INPUT SAMPLE HPAK W Ku-BAND POWER RF INPUT SAMPLE -12VDC 2 +12VDC IN PS M&C P /N: LXXX XXX-X IN PS M&C 2 P /N: LXXX XXX-X 2 PS M&C POL 1 RF INPUT POL 2 RF INPUT P /N: LXXX XXX-X SERIAL I/O SSPA SERIAL I/O SSPA SERIAL I/O SSPA J23 Outline Drawing, 1:2 Redundant System,, using 4RU SSPAs, with Top Mounted Waveguide Switching, Cabinet not included RF OUTPUT SAMPLE RF OUTPUT SAMPLE RF OUTPUT SAMPLE 6 OF 12

7 HPAK W Ku-BAND HPAK W Ku-BAND P/N: LXXXXXX-X AC IN 0 AC IN 0 RF OUT J2 RF OUT J2 P/N: LXXXXXX-X P/N: LXXXXXX-X RF IN RF IN Outline Drawing, 1:1 Redundant System,, using 3RU SSPAs, with Top Mounted Waveguide Switching, Cabinet not included 7 OF 12

8 HPAC W C-BAND HPAC W C-BAND AC IN 0 P/N: LXXXXXX-X RF OUT J2 P/N: LXXXXXX-X P/N: LXXXXXX-X RF IN Outline Drawing, 1:1 Redundant System,, using 3RU SSPAs, with Rear Mounted Waveguide Switching, Cabinet not included 8 OF 12

9 Band S - S-Band C - X - K - Part Number Configuration, 3 RU Chassis HPA 3 Power Level (in Watts) S-Band 050, 100, 200, or , 030, 040, 050, 075, 100, 140, 200, 250, or , 075, 100, 140 or , 020, 025, 035, 040, 050, 070, 100, 125 or 150 Frequency Sub Band S-Band A to 2.12 GHz B to 2.30 GHz A to GHz B to GHz C to GHz E to GHz (Palapa) F to GHz (Insat) G to GHz V 1, to GHz A to 8.40 GHz B to 8.50 GHz C to GHz D to 8.40 GHz A to GHz B to GHz 1 Available with optional BUC. 2 With 1.3:1 VSWR. Package S = Rack Mount, Top Mounted Waveguide Switching, with Cabinet T = Rack Mount, Top Mounted Waveguide Switching, without Cabinet Y = Rack Mount, Rear Mounted Waveguide Switching, with Cabinet Z = Rack Mount, Rear Mounted Waveguide Switching, without Cabinet Configuration Modifier 3 E 3 = Rear Panel Exhaust Adapters P = External 1RU N+1 Power Supply R 4 = Receive Band Reject Filter K 3,4 = Rear Panel Exhaust Adapters & Receive Band Reject Filter L 3 = External 1RU N+1 Power Supply & Rear Panel Exhaust Adapters M 4 = External 1RU N+1 Power Supply & Receive Band Reject Filter 3 Not available with Package options Y or Z. 4 S-Band only. Configuration Modifier 2 V = Reflected Power Monitor P 1 = Front Panel Power Switch R 1 = Reflected Power Monitor & Front Panel Power Switch 1 Not available with External 1RU N+1 Power Supply. Configuration Modifier 1 R 1 = 90 Output W/G Flange S = Input Sample Port T 1 = 90 Output W/G Flange & Input Sample Port 1 Not available in S-Band units. System Configuration A 1 = 1:1 w/ Input Switching, Internal Control B = 1:1 w/ Input Splitter, Internal Control C 1 = 1:2 w/ Input Switching & RCP D 1 = 1:2 w/ Input Switching, Internal Control F = 1:1 w/ Input Splitter & RCP H 1 = 1:1 w/ Input Switching & RCP S = Custom 1 Input switching with external reference BUC requires a reference distribution box. 2 Standard location for RCP is directly above HPA1 Block Up Converter B = BUC (Custom) M = Internal Reference ZBUC P = External Reference ZBUC X = N/A Specifications listed in this document are subject to change without notice. 9 OF 12

10 Band S - S-Band C - X - K - Part Number Configuration, 4 RU Chassis HPA 2 Power Level (in Watts) S-Band 050, 100, 200, 400, , 030, 040, 050, 075, 100, 140, 200, 250, 300, 400, 500, , 075, 100, 140, 200, 250, 350, , 020, 025, 035, 040, 050, 070, 100, 125, 200, 250 Frequency Sub Band S-Band A to 2.12 GHz B to 2.30 GHz A to GHz B to GHz C to GHz E to GHz (Palapa) F to GHz (Insat) G to GHz V 1, to GHz A to 8.40 GHz B to 8.50 GHz C to GHz D to 8.40 GHz A to GHz B to GHz 1 Available with optional BUC. 2 With 1.3:1 VSWR. Configuration Modifier 3 D = 48V Input E 2 = Rear Panel Exhaust Adapters R 3 = Receive Band Reject Filter J 2 = 48V Input & Rear Panel Exhaust Adapters H 3 = 48V Input & Rx Band Reject Filter K 2,3 = Rear Panel Exhaust Adapters & Receive Band Reject Filter L 2 = External 1RU N+1 Power Supply & Rear Panel Exhaust Adapters M 3 = External 1RU N+1 Power Supply & Receive Band Reject Filter P = External 1RU N+1 Power Supply 2 Not available with Package options Y and Z. 3 S-Band only. Configuration Modifier 2 V = Reflected Power Monitor Configuration Modifier 1 S = Input Sample C 1 = Input Sample & 110/220 VAC Operation K 1 = 110/220 VAC Operation W Ku- & W C-band only; Consult factory regarding other bands and power levels. System Configuration A 1 = 1:1 w/ Input Switching, Internal Control B = 1:1 w/ Input Splitter, Internal Control C 1 = 1:2 w/ Input Switching & RCP D 1 = 1:2 w/ Input Switching, Internal Control F = 1:1 w/ Input Splitter & RCP H 1 = 1:1 w/ Input Switching & RCP S = Custom 1 Input switching with external reference BUC requires a reference distribution box. 2 Standard location for RCP is directly above HPA1 Package S = Rack Mount, Top Mounted Waveguide Switching, with Cabinet T = Rack Mount, Top Mounted Waveguide Switching, without Cabinet Y = Rack Mount, Rear Mounted Waveguide Switching, with Cabinet Z = Rack Mount, Rear Mounted Waveguide Switching, without Cabinet Block Up Converter B = BUC (Custom) M = Internal Reference ZBUC P = External Reference ZBUC X = N/A Specifications listed in this document are subject to change without notice. 10 OF 12

11 Band C - X - K - HPA Power Level (in Watts) 800, 900, 1100 (11K) 700, 1000 (10K) 400, 500 Part Number Configuration, 6 RU Chassis 6 Frequency Sub Band A to GHz B to GHz C to GHz E to GHz (Palapa) F to GHz (Insat) G to GHz V 1, to GHz A to 8.40 GHz B to 8.50 GHz C to GHz D to 8.40 GHz A to GHz B to GHz 1 Available with optional BUC. 2 With 1.3:1 VSWR. Package S = Rack Mount, Top Mounted Waveguide Switching, with Cabinet T = Rack Mount, Top Mounted Waveguide Switching, without Cabinet Y = Rack Mount, Rear Mounted Waveguide Switching, with Cabinet Z = Rack Mount, Rear Mounted Waveguide Switching, without Cabinet Configuration Modifier 3 E 1 = Rear Panel Exhaust Adapters 1 Not available with Package options Y or Z. Configuration Modifier 2 V = Reflected Power Monitor Configuration Modifier 1 D = Redundant 1RU Power Supply E = Redundant 1RU Power Supply & Input Sample Port System Configuration S = Custom A 1 = 1:1 System w/ Input Switching B = 1:1 System w/ Input Splitter C 1 = 1:2 System w/ Input Switching & RCP D 1 = 1:2 System w/ Input Switching, Internal Redundancy Control F = 1:1 System w/ Input Splitter & RCP H 1 = 1:1 System w/ Input Switching & RCP Input switching with external reference BUC requires a reference distribution box. 2 Standard location for RCP is directly above HPA1 Block Up Converter B = BUC (Custom) M = Internal Reference ZBUC P = External Reference ZBUC X = N/A Specifications listed in this document are subject to change without notice. 11 OF 12

12 Band C - X - K - HPA Power Level (in Watts) 800, 900, 1100 (11K) 700, 1000 (10K) 400, 500 Part Number Configuration, 7 RU Chassis 7 Frequency Sub Band A to GHz B to GHz C to GHz E to GHz (Palapa) F to GHz (Insat) G to GHz V 1, to GHz A to 8.40 GHz B to 8.50 GHz C to GHz D to 8.40 GHz A to GHz B to GHz 1 Available with optional BUC. 2 With 1.3:1 VSWR. Package S = Rack Mount, Top Mounted Waveguide Switching, with Cabinet T = Rack Mount, Top Mounted Waveguide Switching, without Cabinet Y = Rack Mount, Rear Mounted Waveguide Switching, with Cabinet Z = Rack Mount, Rear Mounted Waveguide Switching, without Cabinet Configuration Modifier 3 E 1 = Rear Panel Exhaust Adapters 1 Not available with Package options Y or Z. Configuration Modifier 2 V = Reflected Power Monitor Configuration Modifier 1 D = Redundant 1RU Power Supply E = Redundant 1RU Power Supply & Input Sample Port System Configuration S = Custom A 1 = 1:1 System w/ Input Switching B = 1:1 System w/ Input Splitter C 1 = 1:2 System w/ Input Switching & RCP D 1 = 1:2 System w/ Input Switching, Internal Redundancy Control F = 1:1 System w/ Input Splitter & RCP H 1 = 1:1 System w/ Input Switching & RCP Input switching with external reference BUC requires a reference distribution box. 2 Standard location for RCP is directly above HPA1 Block Up Converter B = BUC (Custom) M = Internal Reference zbuc P = External Reference zbuc X = N/A Use and Disclosure of Data The information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, reexport or diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. 12 OF 12