Air Band Multicoupling Products MHz MHz

Transcription

1 Air Band Multicoupling Products MHz MHz AFL Proposal Page: 1 of 12

2 Air Band Cavity Filters Key Features Low Insertion Loss Easy to install 19 Rack Mount High isolation TX-TX MTBF > 500,000 hours Product Description The AFL range of cavity filters is used to provide the low-loss filtering in a transmitter or receiver multicoupling system. The combiners are designed to be easily rack mounted. The high Q cavity is of a silver plated construction, used to secure the ultimate performance with space advantage to obtain approximately 10% improvement in Q for occupied volume. The 8 inch VHF cavity provides a more economic product when the need for a silver plated version does not arise. The AFL UHF air band cavity provides tuneability over the full MHz band. AFL Combiners are easy to install, require no maintenance and are very reliable. Applications Simple site capacity upgrade Flexibility of site configuration AFL Proposal Page: 2 of 12

3 MHz VHF Air Band Cavity Filters Single 8 Square Cavity Dual 8 Square Cavity Part Number Frequency Range MHz MHz Insertion Loss 1.0dB maximum at centre frequency (factory set) 2.0dB maximum at centre frequency (factory set) Q o VSWR <1.5:1 <1.5:1 Impedance 50 Ohms 50 Ohms Power Rating 100W 100W Rejection at Centre 15 db 35 db Frequency ±1MHz Temperature Range -20 to +60ºC -20 to +60ºC Relative Humidity 0-40 deg 95% deg 50% 0-40 deg 95% deg 50% Atmospheric Pressure mbar mbar Weight <7 kg <15 kg Rack Mounting 19 standard 5u per cavity pair 19 standard 5u per cavity pair Connector N Type Female N Type Female AFL Proposal Page: 3 of 12

4 TX2 TX2 TX3 TX4 TO ANTENNA (4 CHANNEL) TO STAR COMBINER (5/6/7/8 CHANNEL) TX3 TX4 4 Channel 8 TX Dual Cavity Combiner (Expandable to 8 Channels) AFL Part Number: Notes: a MHz b.fitted on 5u 19 rack-mounting panel (per pair) c.fully Tunable AFL Proposal Page: 4 of 12

5 Single High Q Square Cavity Dual High Q Square Cavity Part Number Frequency Range MHz MHz Insertion Loss 1.0dB maximum at centre frequency (factory set) 2.0dB maximum at centre frequency (factory set) Q o VSWR <1.5:1 <1.5:1 Impedance 50 Ohms 50 Ohms Power Rating 100W 100W Rejection at Centre 20 db 45 db Frequency ±1MHz Temperature Range -20 to +60ºC -20 to +60ºC Relative Humidity 0-40 deg 95% deg 50% 0-40 deg 95% deg 50% Atmospheric Pressure mbar mbar Weight <9 kg <18 kg Rack Mounting 19 standard 7u per cavity pair 19 standard 7u per cavity pair Connector N Type Female N Type Female TX2 AFL Proposal Page: 5 of 12

6 MHz UHF Air Band Cavity Filters MHz Square Cavity Part Number: Frequency Range MHz Insertion Loss <0.9 db Rejection 300MHz 5dB typical at ±0.5 MHz 9dB typical at ±1.0 MHz 15dB typical at ±2.0 MHz Minimum Channel Spacing for Combining 4MHz (Tuneable System) 500kHz (Fixed System) Q o 10,000 VSWR 1.3:1 Impedance 50 Ohms Temperature Range -20 to +55ºC Weight <9 kg Rack Mounting 19 standard 7u per cavity pair Connector N Type Female Dimensions 275 x 246 x 246 mm AFL Proposal Page: 6 of 12

7 Aviation Band Ferrite Isolators Key Features Low Insertion Loss Low VSWR Power Ratings to 250W Narrowband or wideband Reverse power detection available Product Description To complement our range of cavities and cavity combiners, AFL also offer a range of narrowband tuneable and full air-band wideband isolators. The AFL ferrite isolators provide further isolation between the transmiters in a combining system. The isolators are available for internal or external load applications, editions are available with an internal 50 Ohm load with heatsink, or with an external dummy load selected for operation at the power level required. Where higher levels of isolation are required, the AFL dual ferrite isolator will provide up to 45dB for the full VHF airband bandwidth. AFL Proposal Page: 7 of 12

8 MHz VHF Air Band Ferrite Isolators Broadband Dual Ferrite Isolator AFL Part Number: Frequency Range MHz Bandwidth 26 MHz Insertion Loss 0.75 db maximum VSWR 1.3:1 Isolation >40 db Typical Power Rating Up to 250 Watts (External load) Connectors N type female Temperature Range -10 to +55ºC Dimensions 161x80x25 mm (Excluding connectors) AFL Proposal Page: 8 of 12

9 VHF Air Band Single Ferrite Isolator Frequency Range MHz Tunable Bandwidth 5% of centre frequency Insertion Loss 0.3 db typical VSWR 1.3:1 Isolation >30 db Typical Power Rating Up t0 250 Watts (External Load) Connectors N type female Temperature Range -10 to +55ºC AFL Proposal Page: 9 of 12

10 MHz UHF Air Band Ferrite Isolators UHF Air Band Broadband Dual Ferrite Isolator AFL Part Number: Frequency Range MHz Bandwidth 175 MHz Insertion Loss 1.2 db typical VSWR 1.3:1 Isolation >20 db Power Rating Up to 250 Watts (External load) Connectors N type female Temperature Range -10 to +55ºC Dimensions 161x80x25 mm (Excluding connectors) AFL Proposal Page: 10 of 12

11 UHF Air Band Broadband Dual Ferrite Isolator Frequency Range MHz Bandwidth ±2% of centre frequency Insertion Loss 0.5 db typical VSWR 1.3:1 Isolation >45 db Power Rating Up to 250 Watts (External load) Connectors N type female Temperature Range -10 to +55ºC Dimensions 161x80x25 mm (Excluding connectors) AFL Proposal Page: 11 of 12

12 Accreditation Other Products As part of the Aerial Facilities Ltd product range for air band applications we also offer Band Pass Filters, Diplexers, Notches, Dummy Loads, Splitter / Combiners, Attenuators, Directional Couplers, Receive Splitter Multicouplers, Masthead Amplifiers ( MHz, MHz and MHz) and VSWR monitors. This document gives only a general description of the product and shall not form part of any contract. AFL Proposal Page: 12 of 12