CPPD C 1 L Z A5 B6 XX.XXXX / YY.YYYY CPPD
|
|
|
- Aron Stevenson
- 5 years ago
- Views:
Transcription
1 Field Programmable Crystal Oscillator Programmed in the field with the PG3200 oscillator programming itrument within seconds. Factory Programmable Standard Package Optio Itrument Part Number: CPPD C 1 L Z A5 B6 XX.XXXX / YY.YYYY CPPD C 1 L Z A5 B6 XX.XXXX YY.YYYY SERIES OUTPUT PACKAGE STYLE OLTAGE ADDED FEATURE OPERATING TEMP STABILITY FREQUENCY FREQUENCY CPPD C = CMOS 1 = Full Size Blank = 5 Blank = Cut Tape Blank = 0~+70 B6 = ±100PPM 0.0 ~ 1300 MHz 0.0 ~ 1300 MHz T = TTL 4 = Half Size L = 3.3 B = Bulk A3 = ~+1 BP = ±PPM Pin 1 Logic 0 Pin 1 Logic 1 5 = 3.2x5 Ceramic R = 2.7 T = Tube A5 = 20~+70 BR = ±PPM 7 = 5x7 Ceramic Z = Tape and Reel A7 = ~+85 8 = PLASTIC SMD Specificatio: Description Min Typ Max Unit Frequency Range: Programmable to any discrete frequency Available Stability Optio: 100 Programmable Supply oltage: (1133 MHz) (1100 MHz) (166.0 MHz) Operating Temperature Range Optio: MHz Storage Temperature: +1 Aging: Ta=,dd=5/3.3 1 st Year After 1 st year Programmable Output Level: CMOS/TTL Operating Conditio: Description Min Max Unit DD Supply oltage C TTL C CMOS Max capacitive load on outputs for TTL levels 4..5 DD, MHz 4..5 DD, 133 MHz Max capacitive load on outputs for CMOS levels 4..5 DD, 66 MHz 4..5 DD, MHz 3.6 DD, MHz 3.6 DD, 100 MHz 2.5 DD, 66 MHz ±5 ±1 PPM PPM/Year PPM/Year Charlottesville, A of 5 Telephone: (973)
2 Output Clock Switching Characteristics: Description Test Conditio Min Typ Max Unit Duty Cycle: MHz, C L = MHz, C L = DD 66 1 MHz, C L = MHz, C L = 15 Duty Cycle: 66 MHz, C L DD / MHz, C L 4..5 DD MHz, C L DD MHz, C L MHz, C L 15 Rise/Fall: , DD, C L = , DD, C L = , DD, C L = * DD, DD, C L = * DD, 3.6 DD, C L = * DD, 3.6 DD, C L = Start Up Time From Power On 10 ms RMS Period Jitter MHz 8 11 ps Peak to Peak* 300 MHz ps > 300 MHz ps * Jitter Tested at > 1,000,000 samples, exceeding JEDEC std JESD65 Charlottesville, A of 5 Telephone: (973)
3 Electrical Characteristics: Description Test Conditio Min Typ Max Unit Input Characteristics (Pin 1): IL, LowLevel Input oltage DD = (To switch to F 0 output) DD = * DD DD = * DD IH, HighLevel Input oltage DD = (To switch to F 1 output) DD = * DD DD = * DD I IL, Input Low Current IN = 0 10 µa I IH, Input High Current IN = DD 5 µa Output Characteristics: OL, LowLevel Output oltage DD = 5.0, I OL = DD = 3.3, I OL = OHTTL, HighLevel Output oltage DD = 5.0, I OL = IHCMOS, HighLevel Output oltage DD = 5.0, I OL = 16 DD 0.4 DD = 3.3, I OL = 8 DD 0.4 DD = 2.7, I OL = 6 DD 0.4 Power Supply Current: DD = 5.0, F O 133 MHz (Unloaded) DD = 3.3, F O 100 MHz DD = 2.7, F O 66.0 MHz 20 Standby Current: 10 µa Input PullUp Resistor (Pin 1) DD = 5.0, IN = MΩ DD = 5.0, IN = KΩ Frequency Select Switching Time 0 µs Charlottesville, A of 5 Telephone: (973)
4 Field Programmable Crystal Oscillator *Note: Bypass DD to GND with a 0.01μF capacitor Style 1 Full Size 14 Pin Dip Style 4 Half Size 8 Pin Dip 7 GND 8 Output 14 DD Style 5 3.2x5 Ceramic SMD Style 7 5x7 Ceramic SMD 4 GND 5 Output 8 DD 4 DD 4 DD Charlottesville, A of 5 Telephone: (973)
5 *Note: Bypass DD to GND with a 0.01μF capacitor Style 8 Plastic SMD 4 DD Charlottesville, A of 5 Telephone: (973)
CPPC1LZ A5B6 XX.XXXX TS CPP
Field Programmable Crystal Oscillator Programmed in the field with the PG3200 oscillator programming itrument within seconds. Factory Programmable Can be programmed twice Standard Package Optio Also available
CARDINAL COMPONENTS. Operating Conditions: Description Min Max Unit
Standard Package Options Series CPP Part Numbering Example: CPP C 1 L Z - A5 B6 - XXXXXX TS CPP C 1 L Z A5 SERIES CPP OUTPUT C = CMOS T = TTL Specifications: PACKAGE STYLE 1 = Full Size 4 = Half Size 5
XCO FAST TURNAROUND CLOCK OSCILLATOR HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR FEATURES + DESCRIPTION SELECTOR GUIDE LVCMOS LVDS LVPECL
XCO FAST TURNAROUND DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available
HIGH FREQUENCY, LOW JITTER CLOCK OSCILLATOR
DESCRIPTION FEATURES + The XCO clock series is a cutting edge family of low to high frequency, low jitter output, single or multi - frequency clock oscillators. The XCO clocks are available in 7.0 x 5.0,
High-accuracy EPROM Programmable Single-PLL Clock Generator
Features High-accuracy PLL with 12-bit multiplier and -bit divider EPROM-programmability 3.3 or 5 operation Operating frequency 390 khz 133 MHz at 5 390 khz 0 MHz at 3.3 Reference input from either a 30
Packaging Outline. 7mm. FN A = Product Family. Frequency Stability *AA = ±20 ppm (-10 to +70 C) *A = ±25 ppm (-10 to +70 C)
Series Crystal Clock Oscillator (XO) 3.3V CMOS Low Jitter XO Actual Size = 5 x 7mm Product Features Less than 1.5 ps RMS jitter with non-pll design 3.3V CMOS/TTL compatible logic levels Pin-compatible
VC-801 CMOS Crystal Oscillator Previous Vectron Model VCC4
C-01 CMOS Crystal Oscillator Previous ectron Model CC4 C-01 ectron s C-01 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-01 uses fundamental or 3rd overtone
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
CARDINAL COMPONENTS, INC. The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz
SERIES CJTA The Cardinal Cappuccino Crystal Oscillator CMOS TCXO 10MHz - 250MHz Features 3.3V supply voltage- configurable 10MHz to 250MHz CMOS outputsconfigurable Better than 2Hz tuning resolution Low
PI6C B. 3.3V Low Jitter 1-to-4 Crystal/LVCMOS to LVPECL Fanout Buffer. Description. Features. Block Diagram. Pin Diagram
Features Maximum output frequency: 500MHz 4 pair of differential LPECL outputs Selectable and crystal inputs accepts LCMOS, LTTL input level Ultra low additive phase jitter: < 0.05 ps (typ) (differential
Features. 1 CE Input Pullup
CMOS Oscillator MM8202 PRELIMINARY DATA SHEET General Desription Features Using the IDT CMOS Oscillator technology, originally developed by Mobius Microsystems, the MM8202 replaces quartz crystal based
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. 52 standard frequencies between 3.57MHz and MHz
Frequency Oscillator Page 1 of 6 Low Power Consumption of 3.5 typical at 1.8 52 Standard frequencies between 3.57MHz and 77.760 MHz HCMOS/ LCMOS compatible output SMD package 2.0 x 1.6 mm ELECTRICAL SPECIFICATIONS
UNISONIC TECHNOLOGIES CO., LTD ULC3702 Advance CMOS IC
UNISONIC TECHNOLOGIES CO., LTD ULC3702 Advance CMOS IC DUAL MICROPOWER CMOS VOLTAGE COMPARATORS DESCRIPTION The UTC ULC3702 consists of two independent micropower voltage comparators designed to operate
DS Tap High Speed Silicon Delay Line
www.dalsemi.com FEATURES All-silicon timing circuit Five delayed clock phases per input Precise tap-to-tap nominal delay tolerances of ±0.75 and ±1 ns Input-to-tap 1 delay of 5 ns Nominal Delay tolerances
VCC1 VCC1. CMOS Crystal Oscillator. Description. Features. Applications. Block Diagram. Output V DD GND E/D. Crystal. Oscillator
CC1 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone crystal resulting
VC-820 CMOS Crystal Oscillator
C-20 CMOS Crystal Oscillator C-20 ectron s C-20 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The C-20 uses a fundamental or a 3rd overtone crystal, oscillating
CD4541BC Programmable Timer
CD4541BC Programmable Timer General Description The CD4541BC Programmable Timer is designed with a 16-stage binary counter, an integrated oscillator for use with an external capacitor and two resistors,
Programmable Low-Jitter Precision CMOS Oscillator
DSC8121 General Description The DSC8101 & DSC8121 series of high performance fieldprogrammable oscillators utilizes a proven silicon MEMS technology to provide excellent jitter and stability over a wide
S1903 and S1950 Series
Actual Size = 5 x 7mm Product Features 3.3V or 5V ACMOS/TTL compatible logic levels Very tight frequency stability available Fast clock edge rate Pin-compatible with standard 5x7mm packages Designed for
OSC2 Selector Guide appears at end of data sheet. Maxim Integrated Products 1
9-3697; Rev 0; 4/05 3-Pin Silicon Oscillator General Description The is a silicon oscillator intended as a low-cost improvement to ceramic resonators, crystals, and crystal oscillator modules as the clock
Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz
19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.
Preliminary Rev. M Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator
Accusilicon AS318-B Series Professional Audiophile Crystal Oscillator Features Extremely low close-in phase noise, designed for professional Audiophile & Recording application. Typical -100dBc @ 10Hz at
PI6LC48P Output LVPECL Networking Clock Generator
Features ÎÎFour differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 156.25MHz, 125MHz, 62.5MHz
PECL, LVDS, CMOS Output Low Jitter SMD Crystal Oscillator
PECL, LDS, CMOS Output Low Jitter SMD Crystal Oscillator 7. x. x 1.mm Moisture Sensitivity Level (MSL) This product is Hermetically Sealed and not Moisture Sensitive - MSL = N/A: Not Applicable FEATURES:
PI6LC48P0201A 2-Output LVPECL Networking Clock Generator
Features ÎÎTwo differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 62.5MHz, 125MHz, 156.25MHz
DESCRIPTION CLKOUT CLK2 CLK4 CLK1 VDD GND SOP-8L
FEATURES DESCRIPTION Frequency Range 10MHz to 220MHz Zero input - output delay. Low output-to-output skew. Optional Drive Strength: Standard (8mA) PL123E-05 High (12mA) PL123E-05H 2.5 or 3.3, ±10% operation.
TRIPLE PLL FIELD PROG. SPREAD SPECTRUM CLOCK SYNTHESIZER. Features
DATASHEET ICS280 Description The ICS280 field programmable spread spectrum clock synthesizer generates up to four high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
ICS276 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS276 Description The ICS276 field programmable VCXO clock synthesizer generates up to three high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Factory programmable output frequency: 1Hz to 32.768kHz Available in two types of ultra-miniature packages: 2.0 x 1.2 x 0.6mm (SMD);
Ultra-miniature, Low Power, kHz MEMS Oscillator
ESD Sensitive Moisture Sensitivity Level (MSL) 1 FEATURES: APPLICATIONS: Ultra-miniature size: Supply oltage: 1.2 to 3.63 (-10 ~ +70); 1.5 to 3.63 (-40 ~ +85) Ultra-Low Current Consumption: 1.4µA max.
PCI-EXPRESS CLOCK SOURCE. Features
DATASHEET ICS557-01 Description The ICS557-01 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 100 MHz in a small 8-pin SOIC package.
DESCRIPTION CLKA1 CLKA2 CLKA3 CLKA4 CLKB1 CLKB2 CLKB3 CLKB4
PL123-05 PL123-09 FEATURES DESCRIPTION Frequency Range 10MHz to 134 MHz Output Options: o 5 outputs PL123-05 o 9 outputs PL123-09 Zero input - output delay Optional Drive Strength: Standard (8mA) High
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1., 2.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 125 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 24.000000 MHz PRODUCT TYPE TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR SPEC. NO. ( P/N ) FJ2400002 CUSTOMER P/N
CD4538 Dual Precision Monostable
CD4538 Dual Precision Monostable General Description The CD4538BC is a dual, precision monostable multivibrator with independent trigger and reset controls. The device is retriggerable and resettable,
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY 25.000000 MHz PRODUCT TYPE SPEC. NO. ( P/N ) TYPE FJ 2.5x2.0 SEAM SEALED CRYSTAL CLOCK OSCILLATOR CUSTOMER P/N ISSUE DATE
MK1413 MPEG AUDIO CLOCK SOURCE. Features. Description. Block Diagram DATASHEET
DATASHEET MK1413 Description The MK1413 is the ideal way to generate clocks for MPEG audio devices in computers. The device uses IDT s proprietary mixture of analog and digital Phase-Locked Loop (PLL)
PI6LC48P03 3-Output LVPECL Networking Clock Generator
Features ÎÎThree differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 125MHz, 156.25MHz, 312.5MHz,
UNISONIC TECHNOLOGIES CO., LTD CD4541
UNISONIC TECHNOLOGIES CO., LTD CD4541 PROGRAMMABLE TIMER DESCRIPTION The CD4541 programmable timer comprise a 16-stage binary counter, an integrated oscillator for use with an external capacitor and two
M-991 Call Progress Tone Generator
Call Progress Tone Generator Generates standard call progress tones Digital input control Linear (analog) output Power output capable of driving standard line 14-pin DIP and 16-pin SOIC package types Single
Low-Jitter I 2 C/SPI Programmable CMOS Oscillator
Datasheet General Description The DSC2110 and series of programmable, highperformance CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places Operating temperature from -40 C to +85 C. Refer to MO2018 for -40 C to +85 C option and MO2020 for -55 C to +125 C option
PI6LC48P0301A 3-Output LVPECL Networking Clock Generator
Features ÎÎThree differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 125MHz, 156.25MHz, 312.5MHz,
PI6C557-03AQ. PCIe 2.0 Clock Generator with 2 HCSL Outputs for Automotive Applications. Description. Features. Pin Configuration (16-Pin TSSOP)
PCIe.0 Clock Generator with HCSL Outputs for Automotive Applications Features ÎÎPCIe.0 compliant à à Phase jitter -.1ps RMS (typ) ÎÎLVDS compatible outputs ÎÎSupply voltage of 3.3V ±10% ÎÎ5MHz crystal
Model 653 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard
PI6CX201A. 25MHz Jitter Attenuator. Features
Features PLL with quartz stabilized XO Optimized for MHz input/output frequency Other frequencies available Low phase jitter less than 30fs typical Free run mode ±100ppm Single ended input and outputs
General Purpose Clock Synthesizer
1CY 290 7 fax id: 3521 CY2907 General Purpose Clock Synthesizer Features Highly configurable single PLL clock synthesizer provides all clocking requirements for numerous applications Compatible with all
PI6LC48P03A 3-Output LVPECL Networking Clock Generator
Features ÎÎThree differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 125MHz, 156.25MHz, 312.5MHz,
ICS660 DIGITAL VIDEO CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS660 Description The ICS660 provides clock generation and conversion for clock rates commonly needed in digital video equipment, including rates for MPEG, NTSC, PAL, and HDTV. The ICS660 uses
ICS NETWORKING AND PCI CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET Description The is a low cost frequency generator designed to support networking and PCI applications. Using analog/digital Phase Locked-Loop (PLL) techniques, the device uses a standard fundamental
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATORS ASDMP Series
ASDMP Series FEATURES: Ultra Miniature Pure SiliconTM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication Exceptional Stability Over Temp. at
Ultra Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard
MK SPREAD SPECTRUM MULTIPLIER CLOCK. Description. Features. Block Diagram DATASHEET
DATASHEET MK1714-01 Description The MK1714-01 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread spectrum designed to generate high frequency clocks
MK SPREAD SPECTRUM MULTIPLIER CLOCK. Description. Features. Block Diagram DATASHEET
DATASHEET MK1714-02 Description The MK1714-02 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread designed to generate high frequency clocks with low
Model 633 Very Low Jitter LVPECL or LVDS Clock
Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 220MHz * +2.5V or +3.3V Operation Output Enable Standard
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
ICS NETWORKING CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET Description The generates four high-quality, high-frequency clock outputs. It is designed to replace multiple crystals and crystal oscillators in networking applications. Using ICS patented Phase-Locked
HCF4538B DUAL MONOSTABLE MULTIVIBRATOR
DUAL MONOSTABLE MULTIIBRATOR RETRIGGERABLE/RESETTABLE CAPABILITY TRIGGER AND RESET PROPAGATION DELAYS INDEPENDENT OF R X, C X TRIGGERING FROM LEADING OR TRAILING EDGE Q AND Q BUFFERED OUTPUT AAILABLE SEPARATE
DSC2011. Low-Jitter Configurable Dual CMOS Oscillator. General Description. Features. Block Diagram. Applications
General Description The DSC2011 series of high performance dual output CMOS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional
PI6LC48P Output LVPECL Networking Clock Generator
Features ÎÎThree differential LVPECL output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 125MHz, 156.25MHz, 312.5MHz,
MK2705 AUDIO CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET MK2705 Description The MK2705 provides synchronous clock generation for audio sampling clock rates derived from an MPEG stream, or can be used as a standalone clock source with a 27 MHz crystal.
Low-Power 2.25V to 3.63V DC to 150MHz 1:6 Fanout Buffer IC DESCRIPTION
FEATURES 1:6 LVCMOS output fanout buffer for DC to 150MHz 8mA Output Drive Strength Low power consumption for portable applications Low input-output delay Output-Output skew less than 250ps Low Additive
ULTRA-LOW POWER OSCILLATOR 1-26MHz
ULTRA-LOW POWER OSCILLATOR 1-26MHz SERIES ULPO FEATURES + Ultra Low Power High Precision Oscillator for Low Cost + Excellent long time reliability + Ultra-small 1.5 mm x 0.8 mm package + 1 to 26 MHz with
SC4215 Very Low Input /Very Low Dropout 2 Amp Regulator With Enable POWER MANAGEMENT Features Description Applications Typical Application Circuit
ery Low Input /ery Low Dropout 2 Amp Regulator With Enable POWER MANAGEMENT Features Input oltage as low as 1.6 500m dropout @ 2A Adjustable output from 0.8 Over current and over temperature protection
NB3N502/D. 14 MHz to 190 MHz PLL Clock Multiplier
4 MHz to 90 MHz PLL Clock Multiplier Description The NB3N502 is a clock multiplier device that generates a low jitter, TTL/CMOS level output clock which is a precise multiple of the external input reference
TOP VIEW. Maxim Integrated Products 1
19-3474; Rev 2; 8/07 Silicon Oscillator with Low-Power General Description The dual-speed silicon oscillator with reset is a replacement for ceramic resonators, crystals, crystal oscillator modules, and
DS4-XO Series Crystal Oscillators DS4125 DS4776
Rev 2; 6/08 DS4-XO Series Crystal Oscillators General Description The DS4125, DS4150, DS4155, DS4156, DS4160, DS4250, DS4300, DS4311, DS4312, DS4622, and DS4776 ceramic surface-mount crystal oscillators
Key Electrical Specifications Parameters Minimum Typical Maximum Units Notes ppm
Moisture Sensitivity Level (MSL) 1 FEATURES: Ultra low phase Jitter: 0.2ps max integrated 12 khz to 20 MHz BW ±50ppm total frequency stability over -40 C to +85 C temperature range Output type: LVCMOS,,
ICS502 LOCO PLL CLOCK MULTIPLIER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS502 Description The ICS502 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The
ICS722 LOW COST 27 MHZ 3.3 VOLT VCXO. Description. Features. Block Diagram DATASHEET
DATASHEET ICS722 Description The ICS722 is a low cost, low-jitter, high-performance 3.3 volt designed to replace expensive discrete s modules. The on-chip Voltage Controlled Crystal Oscillator accepts
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC4521BP
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic 24-Stage Frequency Divider is frequency divider coisting of 24 stages of flip-flop. The input section is equipped with an inverter to enable to
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
LOCO PLL CLOCK MULTIPLIER. Features
DATASHEET ICS501A Description The ICS501A LOCO TM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands
ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION VALUE UNIT. Any Frequency between Frequency range, accurate to 6 decimal places
Page 1 of 5 Ultra low phase jitter: 0.5ps ( 12kHz to 20MHz ) LCMOS/ LTTL compatible output SMD package 7.0 x 5.0 mm ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL CONDITION ALUE UNIT Min. Typ. Max. Frequency
ICS PCI-EXPRESS CLOCK SOURCE. Description. Features. Block Diagram DATASHEET
DATASHEET ICS557-0 Description The ICS557-0 is a clock chip designed for use in PCI-Express Cards as a clock source. It provides a pair of differential outputs at 00 MHz in a small 8-pin SOIC package.
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range. Frequency Stability and Aging ppm ppm ppm ppm
Features Frequencies between 115.194001 MHz to 137 MHz accurate to 6 decimal places Operating temperature from -40 C to +125 C. For -55 C option, refer to MO8920 and MO8921 Supply voltage of +1.8V or +2.5V
BLOCK DIAGRAM. Functionality Table 1 details the differences between the parts to assist designers in selecting the optimal part for their design.
FEATURES LVPECL Outputs Optimized for Very Low Phase Noise (-165dBc/Hz) Up to 800MHz Bandwidth Selectable 1, 2 Output Selectable Enable Logic 3.0V to 3.6V Operation RoHS Compliant Pb Free Packages BLOCK
MK3722 VCXO PLUS AUDIO CLOCK FOR STB. Description. Features. Block Diagram DATASHEET
DATASHEET MK3722 Description The MK3722 is a low cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive discrete VCXOs and multipliers. The patented on-chip Voltage
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
VCC M CMOS Crystal Oscillator
CC1-1545-49M1520000 CMOS Crystal Oscillator CC1 Description ectron s CC1 Crystal Oscillator (XO) is a quartz stabilized square wave generator with a CMOS output. The CC1 uses a fundamental or 3rd overtone
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 25.000000 MHz TYPE FK 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
ICS663 PLL BUILDING BLOCK
Description The ICS663 is a low cost Phase-Locked Loop (PLL) designed for clock synthesis and synchronization. Included on the chip are the phase detector, charge pump, Voltage Controlled Oscillator (VCO)
Features. Applications
PCIe Fanout Buffer 267MHz, 8 HCSL Outputs with 2 Input MUX PrecisionEdge General Description The is a high-speed, fully differential 1:8 clock fanout buffer optimized to provide eight identical output
VCC4 series 1.8, 2.5, 3.3, 5.0 volt CMOS Oscillator
CC series 1.,.5,., 5.0 volt CMOS Oscillator Features CMOS output Output frequencies to 15 MHz Low jitter, Fundamental or rd OT Crystal Tristate output for board test and debug 10/70 or 0/5 C operating
Advanced Analog Technology, Inc. October 2009 AAT1301 PACKAGE PACKING TEMP RANGE MARKING. T: Tape and Reel. 20 C to +85 C.
`Product information presented is current as of publication date. Details are subject to change without notice PROGRAMMABLE VCOM BUFFER FEATURES I 2 C Interface Output Range Adjustable by Resistors 7 Bits
PI6LC48P25104 Single Output LVPECL Clock Generator
Features ÎÎSingle differential LPECL output ÎÎOutput frequency range: 145MHz to 187.5MHz ÎÎRMS phase jitter @ 156.25MHz, using a 25MHz crystal (12kHz - 20MHz): 0.3ps (typical) ÎÎFull 3.3 or 2.5 supply
ICS HIGH PERFORMANCE VCXO. Features. Description. Block Diagram DATASHEET
DATASHEET ICS3726-02 Description The ICS3726-02 is a low cost, low-jitter, high-performance designed to replace expensive discrete s modules. The ICS3726-02 offers a wid operating frequency range and high
AS ma Low Drop Out Voltage Regulator
ma Low Drop Out oltage Regulator FEATURES Output Accuracy, 3.3,@ ma Output ery Low Quiescent Current Low Dropout oltage Extremely Tight Load And Line Regulation ery Low Temperature Coefficient Current
MEMS Oscillator, Low Power, LVCMOS, MHz to MHz
Features: MEMS Technology Direct pin to pin drop-in replacement for industry-standard packages LVCMOS Compatible Output Industry-standard package 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, and 7.0 x 5.0
MK2703 PLL AUDIO CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET
DATASHEET MK2703 Description The MK2703 is a low-cost, low-jitter, high-performance PLL clock synthesizer designed to replace oscillators and PLL circuits in set-top box and multimedia systems. Using IDT
PSE Technology Corporation
PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY HOLDER TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 156.250000 MHz TYPE UX 3.2x2.5 SEAM SEALED CRYSTAL CLOCK OSCILLATOR
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
ICS OSCILLATOR, MULTIPLIER, AND BUFFER WITH 8 OUTPUTS. Description. Features (all) Features (specific) DATASHEET
DATASHEET ICS552-01 Description The ICS552-01 produces 8 low-skew copies of the multiple input clock or fundamental, parallel-mode crystal. Unlike other clock drivers, these parts do not require a separate
MM74HC221A Dual Non-Retriggerable Monostable Multivibrator
September 1983 Revised January 2004 MM74HC221A Dual Non-Retriggerable Monostable Multivibrator General Description The MM74HC221A high speed monostable multivibrators (one shots) utilize advanced silicon-gate
V CC 2.7V TO 5.5V. Maxim Integrated Products 1
19-3491; Rev 1; 3/07 Silicon Oscillator with Reset Output General Description The silicon oscillator replaces ceramic resonators, crystals, and crystal-oscillator modules as the clock source for microcontrollers
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
DS1090 OUTPUT FREQUENCY RANGE PIN- PACKAGE PART PRESCALER
Rev ; / PART OUTPUT FREQUENCY RANGE PRESCALER * PIN- PACKAGE U-1 MHz to MHz 1 µsop U-2* 2MHz to MHz 2 µsop U-* 1MHz to 2MHz µsop U-* 5kHz to 1MHz µsop U-16 U-32* 25kHz to 5kHz 125kHz to 25kHz 16 µsop 32
Parameters Symbol Min. Typ. Max. Unit Condition Frequency Range Output Frequency Range f MHz
Features Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places 100% pin-to-pin drop-in replacement to quartz-based XO Excellent total frequency stability as low as ±20 ppm Operating temperature
SM Features. General Description. Applications. Block Diagram
ClockWorks 10GbE (156.25MHz, 312.5MHz), Ultra-Low Jitter, LVPECL Frequency Synthesizer General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely low-noise