MHz SAW Filter

Transcription

1 85577 Applications General Purpose For WCDMA applications SMP2, 5. x 5. x.32 mm Prouct Features Functional Block Diagram Usable banwith 5 MHz Low loss High attenuation Singleene operation Impeance matching require for operation at 5 ohms Small size: 5. x 5. x.32 mm Ceramic Surface Mount Package (SMP) Hermetically seale RoHS (22/95/EC) compliant, Pbfree Pb Input Output General Description The is a highperformance IF SAW filter with a center frequency of 9 MHz an a usable banwith of 5 MHz. It features low loss with excellent attenuation, an is esigne to be use with a balance input an output. Pin Configuration Top View Pin No. Label 2 Input 6 Output 3,7 Groun,4,5,8 Case Groun The evice is RoHS compliant an Pbfree. Orering Information Part No. Description Package Part 85577EVB Evaluation boar Stanar T/R size = 4 units/reel Data Sheet: Rev. B 466 of 6 Disclaimer: Subject to change without notice

2 85577 Absolute Maximum Ratings Parameter Rating. Operation of this evice outsie the parameter ranges given Storage Temperature () 4 to + 85 C Operable Temperature (2) 4 to + 85 C may cause permanent amage. 2. Specifications are not guarantee over all operable conitions. Electrical Specifications () Test conitions unless otherwise note: (2) Temperature Range 3 to + 7 C Parameter (3) Conitions Min Typical (4) Max Units Center Frequency 9 MHz Insertion Loss At 9 MHz 8 B Lower 5 B Ban Ege (5) Upper 5 B Ban Ege (5) MHz Phase Ripple MHz eg RMS Attenuation (5) 6 7 MHz 7 8 MHz MHz MHz 2 2 MHz 2 22 MHz Source/Loa Impeance (6) Singleene 5. All specifications are base on the TriQuint schematic reference esign shown on page In prouction, evices will be teste at room temperature to a guarbane specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the esign to account for the variations ue to temperature rift an manufacturing tolerances. 4. Typical values are base on average measurements at room temperature. 5. Relative to insertion loss at center frequency. 6. This is the optimum impeance in orer to achieve the performance shown B Data Sheet: Rev. B of 6 Disclaimer: Subject to change without notice

3 A JJJYM Evaluation Boar 5 33pF 56nH 2 6,3,4 5,7,8 47nH 33pF 5 3layers boar top, mile & bottom layer: oz copper Substrates:.3 thick FR4 ielectric. Finish plating: Nickel: 38 µm thick, Gol:.3.2 µm thick Hole plating: Copper min.8 µm thick PCB Mounting Pattern All imensions are in millimeters. Angles are in egrees. 2. This rawing specifies the mounting pattern use on the TriQuint evaluation boar for this prouct. Some moification may be necessary to suit en user assembly materials an processes Bill of Material Reference Des. D Value Description Manuf. Part Number L 56 nh Coil Wirewoun, 42, ± 5 % Murata LQW5AN56NG L2 47 nh Coil Wirewoun, 42, ± 5 % Murata LQW5AN47NG C 33 pf Chip Ceramic, 42, ± 5% Murata GRM555CH33GZ C2 33 pf Chip Ceramic, 42, ± 5% Murata GRM555CH33GZ SMA N/A SMA connector Raiall USA Inc PCB N/A 3layer Multiple Data Sheet: Rev. B of 6 Disclaimer: Subject to change without notice

4 85577 Performance Plots (Test conitions unless otherwise note: Temp.= + 25 C) Frequency Response 7 Passban Response 9 2 B 3 B Wieban Response 2 Phase Response 2 3 B e g Input Smith Chart Output Smith Chart Data Sheet: Rev. B of 6 Disclaimer: Subject to change without notice

5 85577 Mechanical Information Sawtek logo ID ot A JJJYM Marking coe Date coe Package Style: SMP2A Dimensions: 5. x 5. x.32 mm Boy: Al 2 O 3 ceramic Li: Kovar, Ni plate Terminations: Au plating.5.μm, over a 26μm Ni plating.32 NOM..52 MAX All imensions shown are nominal in millimeters All tolerances are ±.5mm except overall length an with ±.mm The ate coe consists of: ay of the current year (Julian, 3 igits), Y = last igit of the year, an M = manufacturing site coe. All imensions shown are typical in millimeters 2. An asterisk (*) in front of the marking coe inicates prototype Tape an Reel information Stanar T/R size = 4 units / reel. All imensions are in millimeters Ø33 ID ot Sawtek logo Section AA Ø.5 A.75 Ø2 Ø2.2 Ø3. 2. Direction of travel Ø.5 A Data Sheet: Rev. B of 6 Disclaimer: Subject to change without notice

6 85577 Prouct Compliance Information ESD Sensitivity Ratings Caution! ESDSensitive Device ESD Rating: C Value: Passes 8 V min. Test: Human Boy Moel (HBM) Stanar: ESDA/JEDEC JS22 ESD Rating: B Value: Passes 2 V min. Test: Machine Moel (MM) Stanar: JEDEC Stanar JESD22A5 MSL Rating Not applicable. Hermetic package. Solerability Compatible with both leafree (26 C maximum reflow temperature) an tin/lea (245 C maximum reflow temperature) solering processes. Refer to Solering Profile for recommene guielines. RoHs Compliance This part is compliant with EU 22/95/EC RoHS irective (Restrictions on the Use of Certain Hazarous Substances in Electrical an Electronic Equipment). This prouct also has the following attributes: Lea Free Halogen Free (Chlorine, Bromine) Antimony Free TBBPA (C 5 H 2 Br 4 2 ) Free PFOS Free SVHC Free Contact Information For the latest specifications, aitional prouct information, worlwie sales an istribution locations, an information about TriQuint: Web: Tel: infosales@tqs.com Fax: For technical questions an application information: flapplication.engineering@tqs.com Important Notice The information containe herein is believe to be reliable. TriQuint makes no warranties regaring the information containe herein. TriQuint assumes no responsibility or liability whatsoever for any of the information containe herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information containe herein. The information containe herein is provie "AS IS, WHERE IS" an with all faults, an the entire risk associate with such information is entirely with the user. All information containe herein is subject to change without notice. Customers shoul obtain an verify the latest relevant information before placing orers for TriQuint proucts. The information containe herein or any use of such information oes not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regar to such information itself or anything escribe by such information. TriQuint proucts are not warrante or authorize for use as critical components in meical, lifesaving, or lifesustaining applications, or other applications where a failure woul reasonably be expecte to cause severe personal injury or eath. Data Sheet: Rev. B of 6 Disclaimer: Subject to change without notice