ELQA maintenance, diagnostics and data handling
|
|
|
- Geoffrey Burns
- 5 years ago
- Views:
Transcription
1 ELQA maintenance, diagnostics and data handling Jaromir Ludwin The Henryk Niewodniczański Institute of Nuclear Physics Polish Academy of Sciences, Kraków Poland
2 WP definition KE2058/TE KE2059/TE KE2060/TE ELQA reference measurements at cold before starting LS1 ELQA reference measurements at warm before starting LS1 ELQA reference measurements at warm after splice consolidation campaign ELQA monitoring during cool-down Final ELQA campaign at cold before LHC restart ELQA for splice consolidation ELQA for replacement of magnets Final check of 13kA splice resistance following the splices consolidation train upgrade of the measuring chain of temperature sensor for 13kA circuits relocation of current lead heating system racks of Inner Triplet located in IP1 (Left and Right) and IP5 (Right). handled by CERN staff updating of the cabling regarding 120 A circuit powered via DFBs implementation of the spare cold temperature sensor for the current leads upgrade of cabling at the level of the PE for some IPQs handled by AGH team Line N qualification in the surface. Preparation for the tunnel done in the tunnel in the scope of magnet replacement WP Follow-up of nonconformities related to ELQA matters: diagnostic and solving of all existing nonconformities and new non-conformities, encountered during LS1 Maintenance and data handling consisting in ensuring the maintenance of all ELQA measuring equipment and follow-up of data storage and validation Software development and upgrade of existing programs Team work coordination and administrative tasks + some
3 TP4 Software maintenance and development 141 commits to the TP4 SVN repository counting from the beginning of the LS1, including: Development of the LS1 PAQ software Introduction of the new test sequence: C50-TT validation New tools for measurement data analysis and test parameters optimisation Patches, fixes and improvements of existing software
4 TP4 Software maintenance and development ELQA data base maintenance: Over standard ELQA + LS1 PAQ test results stored during LS1. Additionally data form current transformers production and 600 A EE switch tests. 174 tables with more than records High Voltage Insulation Qualifications 0 Jan-13 Jul-13 Feb-14 Aug-14 Low Voltage Tests (each tests consists of many voltage and resistance measurements) 0 Jan-13 Apr-13 Jul-13 Oct-13 Feb-14 May-14 Aug-14 Dec-14
5 Hardware maintenance and development Reparation of broken test cables Improvements in the measurement systems construction in order to limit the wear Maintenance of the tunnel bikes Preparation of new cabling and test systems: o o Brand new insulation monitoring system for warm-up and cool-down LHC tunnel temperature profile measurement for warm bus-bar measurement compensation
6 Team work coordination and administrative tasks The Polish part of the ELQA team was coordinated by Piotr Jurkiewicz and myself as his deputy The administrative tasks were handled in different periods by: o o o Beata Murzyn Magdalena Kostecka Malgorzata Res-Gunia
7 C50 upgrade 16 proximity equipment crates were upgraded Electrical tests: - In the lab: specially prepared software and adapter cables - In the LHC tunnel: existing TP4 tests + new C50 tests
8 Cabling for QPS Preparation of cabling for the QPS tests Tests of the QPS cables in the LHC tunnel Preparation of new cable segments between the current leads and proximity equipment
9 New hardware/software development New measurement system for the dipole diode lead measurement: Hardware built by IFJ-PAN team, programming and data analysis by Mateusz Bednarek 31 nonconformities found! Dr Mikolaj Bednarski checking the thermal behaviour and insulation quality of the dipole capillary u 40u 60u 80u 100u 120u 140u 160u 180u 200u Resistance [Ohm] 220u Diode lead measurements in the LHC tunnel
10 New hardware/software development Design of the current transformer for the dipole quench heater discharge measurement 5200 units were produced Detailed analysis of the prototype
11 New hardware/software development Current transformer tester Designed, built, programmed and deployed in the factory (including the transport and training for the operators) Special thanks to Ronaldus Suykerbuyk, who designed and manufactured the tester crate
12 New hardware/software development 600 A Energy Extraction switch testers Great improvement in safety Test time reduction Further improvements are still possible First known application of the Allen key as a voltage probe
13 There were many other small, yet important activities. I d like to thank our AGH-UST and CERN colleagues for great cooperation.
14 Thank you for your attention we still have a plenty of work to do before the end of the LS1
Standard ELQA measurements, ELQA for splice and proximity equipment consolidation
Standard ELQA measurements, ELQA for splice and proximity equipment consolidation Piotr Jurkiewicz The Henryk Niewodniczański Institute of Nuclear Physics Polish Academy of Sciences, Kraków Poland ELQA
Hardware Commissioning
Hardware Commissioning an update the status of the documentation the report on the resources the programme of the coming year Roberto Saban on behalf of the Hardware Commissioning Working Group status
IFJ PAN contribution to international projects
IFJ PAN contribution to international projects D. Bocian, A. Kotarba, J. Ludwin, M. Stodulski, J. Świerblewski, M. Wiencek IFJ PAN - ESS meeting Lund, 25 th June 2013 Kraków (Cracow) 700,000 inhabitants
Series manufacture of the LHC main. dipole magnets. Notes about the CERN. approach to industrial. production. C.Wyss & L.
Series manufacture of the LHC main dipole magnets Notes about the CERN approach to industrial production C.Wyss & L.Rossi / CERN SCRF05-12 July 2005 L.Rossi & C.Wyss - CERN 1 1232 +16 units, 8.3 T nominal
LHC COMMISSIONING AT HIGHER ENERGY
LHC COMMISSIONING AT HIGHER ENERGY P. Collier, F. Bordry, J. Wenninger, CERN, Geneva, Switzerland Abstract The LHC has just come to the end of its first Long Shutdown (LS1) and preparations are underway
LARGE SCALE TESTING OF SRF CAVITIES AND MODULES
LARGE SCALE TESTING OF SRF CAVITIES AND MODULES Jacek Swierblewski IFJ PAN Krakow IKC for the XFEL Introduction IFJ PAN 2 Institute of Nuclear Physics (IFJ) located in Kraków, Poland was founded in 1955
LHC BEAM ENERGY IN 2012
LHC BEAM ENERGY IN 2012 A. Siemko, Z. Charifoulline, K. Dahlerup-Petersen, R. Denz, E. Ravaioli, R. Schmidt, A. Verweij CERN, Geneva, Switzerland Abstract The interconnections between the LHC main magnets
MPE main activities planned for YETS
MPE main activities planned fr YETS 2017-18 Machine Interlck J. Uythven Electrnic fr Prtectin (QPS) Machine prtectin Sftware J. Uythven Perfrmance Evaluatin Electrical Engineering Girgi n behalf f MPE
INDUSTRIAL CONTROLS FOR TEST SYSTEMS FROM SUPERCONDUCTING STRANDS TILL MAGNET FIDUCIALISATION IN THE TUNNEL FOR THE LHC PROJECT
INDUSTRIAL CONTROLS FOR TEST SYSTEMS FROM SUPERCONDUCTING STRANDS TILL MAGNET FIDUCIALISATION IN THE TUNNEL FOR THE LHC PROJECT ABSTRACT A. Rijllart, C. Charrondière, B. Khomenko, M. Marchesotti, E. Michel,
Physical Properties Measurement System (PPMS): Detailed specifications: Basic unit cryogen- free
Physical Properties Measurement System (PPMS): A Cryogen-free Physical Properties Measurement system that operates over a wider range of temperature and magnetic fields: fully automated/computer controlled
ELECTRONIC SYSTEMS FOR THE PROTECTION OF SUPERCONDUCTING ELEMENTS IN THE LHC
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics Large Hadron Collider Project LHC Project Report 697 ELECTRONIC SYSTEMS FOR THE PROTECTION OF SUPERCONDUCTING ELEMENTS
Consolidation and development of the CERN Leaky Feeder infrastructure
Consolidation and development of the CERN Leaky Feeder infrastructure F. Chapron IT/CS/CS Agenda What is the use of the leaky feeder (LF) cable at CERN? What is a LF cable? What is the issue? Risks assessment
APAC 2007, Raja Ramanna Centre for Advanced Technology(RRCAT), Indore, India LHC STATUS. Lyndon Evans, CERN, Geneva, Switzerland
LHC STATUS Lyndon Evans, CERN, Geneva, Switzerland Abstract The installation of the Large Hadron Collider at CERN is now approaching completion. Almost 1100 of the 1232 main bending magnets are installed
2008 JINST 3 S Powering and protection. Chapter Overview. 6.2 Powering circuits
Chapter 6 Powering and protection 6.1 Overview A very large number of superconducting and normal conducting magnets will be installed in the LHC, and most magnets of a given type in the same sector will
Cryogenic Testing of Superconducting Corrector Magnets for the LHC Main Dipole
Cryogenic Testing of Superconducting Corrector Magnets for the LHC Main Dipole A.M. Puntambekar SC Tech Lab, AAMD Div. Raja Ramanna Centre For Advanced Technology, Indore Workshop on Cryogenic Science
Testing of the Toroidal Field Model Coil (TFMC)
1 CT/P 14 Testing of the Toroidal Field Model Coil (TFMC) E. Salpietro on behalf of the ITER-TFMC Team EFDA-CSU, Garching,, Germany ettore.salpietro@tech.efda.org Abstract The paper shortly describes the
Magnet Powering with zero downtime a dream?
Magnet Powering with zero downtime a dream? M. Zerlauth LHC Performance Workshop February 2012 Thanks to : HWC team, H.Thiesen, V.Montabonnet, J.P.Burnet, S.Claudet, E.Blanco, R.Denz, R.Schmidt, E.Blanco,
Recreation Facility Hours
NORMAL HOURS Recreation Facility Hours August 1, 2016 July 31, 2017 Last Revised: July 29, 2016 Effective Dates 2016: AUG 23 31, SEP 1 2, SEP 6 16, SEP 18 23, SEP 25 30, OCT 1 7, OCT 9 18, OCT 24 30, NOV
THE HARDWARE INTERFACES BETWEEN WARM MAGNET INTERLOCK SYSTEM, NORMAL CONDUCTING MAGNETS, POWER CONVERTERS AND BEAM INTERLOCK SYSTEM FOR THE LHC RING
CERN CH-1211 Geneva 23 Switzerland the Large Hadron Collider project LHC Project Document No. CERN Div./Group or Supplier/Contractor Document No. AB/CO EDMS Document No. 599288 Date: 2005-06-09 Engineering
INNOVATIVE PERSPECTIVES FOR ELECTRICITY TRANSPORT
INNOVATIVE PERSPECTIVES FOR ELECTRICITY TRANSPORT Jean-Maxime SAUGRAIN Corporate VP Technical Sharing Knowledge Across the Mediterranean Rabat Morocco May 9, 2013 Introduction to superconductors Superconductors
THE ELECTRICAL CIRCUITS IN THE LHC REFERENCE DATABASE
CERN CH-1211 Geneva 23 Switzerland the Large Hadron Collider project Project Document No. CERN Div./Group or Supplier/Contractor Document No. AC-TCP EDMS Document No. 355662 Date: 2003-01-06 Engineering
Laser Alignment System for LumiCal
Laser Alignment System for LumiCal W. Daniluk 1, E. Kielar 1, J. Kotuła 1, K. Oliwa 1, B. Pawlik 1, W. Wierba 1, L. Zawiejski 1 W. Lohmann 2, W. Słomiński 3 December 16, 2008 Abstract The main achievements
XFEL Cryo System. Project X Collaboration Meeting, FNAL September 8-9, 2010 Bernd Petersen DESY MKS (XFEL WP10 & WP13) 1 st stage. Possible extension
XFEL Cryo System Possible extension 1 st stage Project X Collaboration Meeting, FNAL September 8-9, 2010 (XFEL WP10 & WP13) Outline 2 XFEL accelerator structure TESLA technology Basic cryogenic parameters
Status of ATLAS & CMS Experiments
Status of ATLAS & CMS Experiments Atlas S.C. Magnet system Large Air-Core Toroids for µ Tracking 2Tesla Solenoid for inner Tracking (7*2.5m) ECAL & HCAL outside Solenoid Solenoid integrated in ECAL Barrel
1.0 Introduction. 2.0 Scope
1.0 Introduction The LCLS project requires one horizontal kicker magnet (BXKIK) to be installed at sector 25-3d. Nominal LCLS beam energy at that location is 4.8 GeV. The BXKIK magnet is planned to be
SEQUATCHIE COUNTY TENNESSEE
SEQUATCHIE COUNTY TENNESSEE CONSOLIDATED LISTING OF MICROFILMED SEQUATCHIE COUNTY RECORDS CONSISTING OF ROLLS 1-74 and A14858 A14944 Note: I - available through Interlibrary Loan PRESERVATION SERVICES
Commissioning of the ALICE SRF Systems at Daresbury Laboratory Alan Wheelhouse, ASTeC, STFC Daresbury Laboratory ESLS RF 1 st 2 nd October 2008
Commissioning of the ALICE SRF Systems at Daresbury Laboratory Alan Wheelhouse, ASTeC, STFC Daresbury Laboratory ESLS RF 1 st 2 nd October 2008 Overview ALICE (Accelerators and Lasers In Combined Experiments)
H V T E S T S O L U T I O N S PA RT N E RS F O R H V & E M C
H V T E S T S O L U T I O N S PA RT N E RS F O R H V & E M C S O L U T I O N S Y O U R S O U R C E F O R T O P Q U A L I T Y T E S T E Q U I P M E N T w w w. h v t e c h n o l o g i e s. c o m Company
VAN BUREN COUNTY TENNESSEE
VAN BUREN COUNTY TENNESSEE CONSOLIDATED LISTING OF MICROFILMED VAN BUREN COUNTY RECORDS CONSISTING OF ROLLS 1-43, 45-67 and A9296 A9328 Note: I - available through Interlibrary Loan TENNESSEE STATE LIBRARY
Slow Power Abort Check
Operation Methods Date: 27-11-2003 Slow Power Abort Check Prepared By Daniel Babu P, BARC, Mumbai Sridhar S, IGCAR, Kalpakkam Department of Atomic Energy, India Checked and Approved By Dr Vinod Chohan
Phase 1 upgrade of the CMS pixel detector
Phase 1 upgrade of the CMS pixel detector, INFN & University of Perugia, On behalf of the CMS Collaboration. IPRD conference, Siena, Italy. Oct 05, 2016 1 Outline The performance of the present CMS pixel
28/11/2016 Juan Carlos Perez TE-MSC-MDT Jose Ferradas TE-MSC-MDT
TE-MSC-MDT 28/11/2016 Juan Carlos Perez Jose Ferradas TE-MSC-MDT TE-MSC-MDT Outline Description and status of the project Project TE3536 at Laboratory 927 Magnet Design and Technology (MDT) Main results
Proposal of test setup
Proposal of test setup Status of the study The Compact Linear collider (CLIC) study is a site independent feasibility study aiming at the development of a realistic technology at an affordable cost for
The Power Supply System for CMS-ECAL APDs
The Power Supply System for CMS-ECAL APDs Alessandro Bartoloni INFN ROMA 7th Workshop on Electronics for LHC Experiments Stockholm 13-09-01 REQUIREMENTS REQUIREMENTS REQUIREMENTS REQUIREMENTS REQUIREMENTS
Status and Future Perspective of the HIE-ISOLDE Project
Status and Future Perspective of the HIE-ISOLDE Project International Particle Accelerator Conference, IPAC 12 New Orleans, Louisiana, USA, May 20-25, 2012 Yacine.Kadi@cern.ch OUTLINE Scope of HIE-ISOLDE
Figure 1. TAMU1 dipole cross-section. Figure 2. Completed TAMU1 dipole and group that built it.
Testing of TAMU1 Dipole Team that built it: C. Battle, R. Blackburn, N. Diaczenko, T. Elliott, R. Gaedke, W. Henchel, E. Hill, M. Johnson, H. Kautzky, J. McIntyre, P. McIntyre, A. Sattarov Team that tested
Beam Condition Monitors and a Luminometer Based on Diamond Sensors
Beam Condition Monitors and a Luminometer Based on Diamond Sensors Wolfgang Lange, DESY Zeuthen and CMS BRIL group Beam Condition Monitors and a Luminometer Based on Diamond Sensors INSTR14 in Novosibirsk,
ANASAC, September 20, 2012
ANASAC, September 20, 2012 Construction Mark McKinnon Atacama Large Millimeter/submillimeter Array Karl G. Jansky Very Large Array Robert C. Byrd Green Bank Telescope Very Long Baseline Array Antennas
LHC: CONSTRUCTION AND COMMISSIONING STATUS
LHC: CONSTRUCTION AND COMMISSIONING STATUS L. Evans, CERN, Geneva, Switzerland. Abstract The installation of the Large Hadron Collider at CERN is now approaching completion. All magnets are installed with
TEST AND CALIBRATION FACILITY FOR HLS AND WPS SENSORS
IWAA2004, CERN, Geneva, 4-7 October 2004 TEST AND CALIBRATION FACILITY FOR HLS AND WPS SENSORS Andreas Herty, Hélène Mainaud-Durand, Antonio Marin CERN, TS/SU/MTI, 1211 Geneva 23, Switzerland 1. ABSTRACT
HL-LHC Resources request
1768040 1.0 VALID Date: 2017-02-01 Project/Activity: WP1 Title Position/ Project Management engineer As an Organization & Scheduling Support in the Engineering Department (EN), inside the Alignment, Coordination
ASIC/TRB Readout Status in Jülich
ASIC/TRB Readout Status in Jülich Peter Wintz (IKP, FZ Jülich) STT RO WShop, Krakow, Jan-30/31 2016 Outline: ASIC/TRB Readout Status in Jül WPs in Jülich System overview Production status Readout status
INSTALLATION AND FIRST COMMISSIONING OF THE LLRF SYSTEM
INSTALLATION AND FIRST COMMISSIONING OF THE LLRF SYSTEM FOR THE EUROPEAN XFEL Julien Branlard, for the LLRF team TALK OVERVIEW 2 Introduction Brief reminder about the XFEL LLRF system Commissioning goals
Residual Resistivity Ratio (RRR) Measurements of LHC Superconducting NbTi Cable Strands
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics Large Hadron Collider Project LHC Project Report 896 Residual Resistivity Ratio (RRR) Measurements of LHC Superconducting
PQ Data Applications in Con Edison
PQ Data Applications in Con Edison John Foglio July 29th, 2014 Power Quality Monitoring System 69 PQ monitors currently installed in our secondary networks 2 Power Quality Monitoring System 135 PQ monitors
Miljardkonferensen Procurement at CERN
Miljardkonferensen Procurement at CERN 29 April 2015, Stockholm Anders Unnervik Procurement at CERN Introduction to CERN Procurement budget What does CERN buy? How? Procedures and Rules What is in it for
PRODUCT PORTFOLIO TEST AND MEASURING SYSTEMS
PRODUCT PORTFOLIO TEST AND MEASURING SYSTEMS n Quality made in Germany n Standardized and customized solutions n Turn key projects, all from one hand 0.1-1/1 Product Portfolio Test and Measuring Systems
Attitude Determination and Control Specifications
Attitude Determination and Control Specifications 1. SCOPE The attitude determination and control sub system will passively control the orientation of the two twin CubeSats. 1.1 General. This specification
Interfaces with MPS/PSS
Interfaces with / European Spallation Source Accelerator Division TB, 16 November 2016, Lund, Sweden / interfaces 1/21 Outline 1 Introduction 2 3 4 Conclusions / interfaces 2/21 Outline 1 Introduction
Magnets Y.C. Saxena Institute for Plasma Research. 1/16/2007 IPR Peer Review Jan
Magnets Y.C. Saxena Institute for Plasma Research 1/16/2007 IPR Peer Review 15-17 Jan 2007 1 Magnet Development Program driven by Laboratory Scale Experiments ADITYA Tokamak SST-1 Tokamak 1/16/2007 IPR
Philippe Lebrun & Laurent Tavian, CERN
7-11 July 2014 ICEC25 /ICMC 2014 Conference University of Twente, The Netherlands Philippe Lebrun & Laurent Tavian, CERN Ph. Lebrun & L. Tavian, ICEC25 Page 1 Contents Introduction: the European Strategy
CSM High-Voltage Measurement Systems
CSM High-Voltage Measurement Systems Safe Measurement on High-Voltage Components CSM HV Modules // High-Voltage Safe Measurement Systems Safe Measurement on High-Voltage Components E-mobility: enhancing
Micromegas calorimetry R&D
Micromegas calorimetry R&D June 1, 214 The Micromegas R&D pursued at LAPP is primarily intended for Particle Flow calorimetry at future linear colliders. It focuses on hadron calorimetry with large-area
Roman Pots. Marco Oriunno SLAC, PPA. M.Oriunno, SLAC
Roman Pots Marco Oriunno SLAC, PPA The Roman Pot technique 1. The Roman Pot, an historically successful technique for near beam physics: ISR, SPS, TEVATRON, RICH, DESY 2. A CERN in-house technology: ISR,
3.9 GHz System (AH1) XFEL WP46
3.9 GHz System (AH1) XFEL WP46 14th European XFEL Machine Advisory Committee Meeting 02 May 2016 Paolo Pierini, INFN & DESY Elmar Vogel, DESY + INFN/DESY contributors PPT version 1 26/04/2016 Outline Status
Welding systems for industrial and fencing mesh Systems MG950, MG900, MG700, MG600, Syrocut and POSIWELD
Welding systems for industrial and fencing mesh Systems MG950, MG900, MG700, MG600, Syrocut and POSIWELD 2 Areas of application Mesh with different line wire spacings Economic production of industrial
ULTRAHEAT / ULTRACOLD T330. The Evolutionary. Ultrasonic Heat Meter / Cooling Meter. Ultrasonic Heat Meter / Cooling Meter.
Ultrasonic Heat Meter / Cooling Meter Residential Ultrasonic Heat Meter / Cooling Meter The Evolutionary ULTRAHEAT / ULTRACOLD T330 Proven technology one step further T330 COMPACT Versatile installation
AHC-XP. Dewpoint-guided Power Controller for Glass and Handrail Heaters. Front view. Characteristics
Dewpoint-guided Power Controller for Glass and Handrail Heaters Front view Characteristics Dew point-guided power controller for cost-optimized operation of glass and handrail heaters Digital display of
Dewatering Pumps for Construction. Made. forthe. real. world
Dewatering Pumps for Construction Made forthe real world The World s Smartest Dewatering Pump From roads and bridges to tunnels and dams, construction sites are difficult places to work. Mud, slurry, stones
Pressure Transducer Handbook
123 Pressure Transducer Handbook Date: February 2004 TABLE OF CONTENTS SECTION 1 - Introduction 1.1 Introduction 1.2 Product Overview SECTION 2 - Kulite Sensing Technology 2.1 Pressure Transducers 2.2
UNICONT. PMG-400 Universal controller and display unit USER'S AND PROGRAMMING MANUAL 1. pmg4111a0600p_01 1 / 24. ST edition
UNICONT PMG-400 Universal controller and display unit USER'S AND PROGRAMMING MANUAL 1 ST edition pmg4111a0600p_01 1 / 24 TABLE OF CONTENTS 1. GENERAL DESCRIPTION... 3 2. ORDER CODE... 3 3. TECHNICAL DATA...
White Paper. Eliminating Unplanned Production Downtime Instances Due to Replacement of Sensors in Instrument Panel Beam Production Cell HTMSENSORS.
White Paper Eliminating Unplanned Production Downtime Instances Due to Replacement of Sensors in Instrument Panel Beam Production Cell Continuous Improvement Opportunity: The HTM Sensors Cost Reduction
INTERLOCK AND PROTECTION SYSTEMS FOR SUPERCONDUCTING ACCELERATORS: MACHINE PROTECTION SYSTEM FOR THE LHC
INTERLOCK AND PROTECTION SYSTEMS FOR SUPERCONDUCTING ACCELERATORS: MACHINE PROTECTION SYSTEM FOR THE LHC K.H. Meß and R. Schmidt CERN, Geneva, Switzerland Abstract The protection of the LHC accelerator
ULTRAHEAT / ULTRACOLD T330. The Evolutionary. Ultrasonic Heat Meter / Cooling Meter. Ultrasonic Heat Meter / Cooling Meter.
Ultrasonic Heat Meter / Cooling Meter Residential Ultrasonic Heat Meter / Cooling Meter The Evolutionary ULTRAHEAT / ULTRACOLD T330 Proven technology one step further T330 COMPACT Versatile installation
CERN-TE-EPC. Aug-14 TE-EPC Presentation 2
CERN-TE-EPC Aug-14 TE-EPC Presentation 2 CERN The worldwide biggest physics laboratory Geneva Lake LHC SWITZERLAND FRANCE Aug-14 TE-EPC Presentation 3 CERN Core Activity Spying matter using: Accelerators
ASG presentation and activities. Roberto Penco (consultant to ASG)
ASG presentation and activities Roberto Penco (consultant to ASG) CASTEL GROUP SIMA engineering + TECTUBI PARAMED X The near past: ACTIVITY SITE LHC Dipoles (30+386) Internal area (14000 m 2 ) LHC Corrector
CVVOZE Power Laboratories (CVVOZEPowerLab)
CVVOZE Power Laboratories (CVVOZEPowerLab) BRNO, SEPTEMBER 2016 1 Centre for Research and Utilization of Renewable Energy Centre for Research and Utilization of Renewable Energy (CVVOZE) was established
High Power Couplers for TTF - FEL
High Power Couplers for TTF - FEL 1. Requirements for High Power Couplers on superconducting Cavities 2. Characteristics of pulsed couplers 3. Standing wave pattern in the coaxial coupler line 4. Advantages
A new hybrid protection system for high-field superconducting magnets
A new hybrid protection system for high-field superconducting magnets Abstract E Ravaioli 1,2, V I Datskov 1, G Kirby 1, H H J ten Kate 1,2, and A P Verweij 1 1 CERN, Geneva, Switzerland 2 University of
System Integration of the TPS. J.R. Chen NSRRC, Hsinchu
System Integration of the TPS J.R. Chen NSRRC, Hsinchu OUTLINE I. Main features of the TPS II. Major concerns and intersystem effects of an advanced synchrotron light source III. Subsystems and intersystem
An RS485 bus is used for command, monitoring and diagnostic information that can be supplied to a system controller.
The TCP3500 series is an AC-DC converter with adjustable DC output and universal 3-phase AC input. Conduction cooling (No Fans) makes this power supply series suitable for a wide variety of Industrial
The BYKIK pulser and its associated hardware will be mounted inside building 5 at SLAC. Prevailing ambient conditions are:
1.0 Introduction The LCLS project requires one vertical kicker magnet (BYKIK) to be installed in the LTU beamline, 260 meters upbeam of the undulator. The magnet will function to abort undesired beam from
Packaging of Cryogenic Components
Packaging of Cryogenic Components William J. Schneider Senior Mechanical Engineer Emeritus November 19-23 2007 1 Packaging of Cryogenic Components Day one Introduction and Overview 2 What is important?
Specifications. S&C BankGuard Plus Controls. For Substation Capacitor Banks and Shunt Reactors. Conditions of Sale
For Substation Capacitor Banks and Shunt Reactors Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply, except as modified by the SPE CIAL
Safe Measurements in High-Voltage Environments CSM GmbH Computer-Systeme-Messtechnik
Safe Measurements in High-Voltage Environments < Computer-Systeme-Messtechnik Innovative Measurement and Data Technology Why Measurements are Important! Development and optimization of drive concepts for
Physical Design of Superconducting Magnet for ADS Injection I
Submitted to Chinese Physics C' Physical Design of Superconducting Magnet for ADS Injection I PENG Quan-ling( 彭全岭 ), WANG Bing( 王冰 ), CHEN Yuan( 陈沅 ) YANG Xiang-chen( 杨向臣 ) Institute of High Energy Physics,
STATEMENTS MADE AND DATA SHOWN, ARE TO THE BEST OF OUR KNOWLEDGE AND BELIEF, CORRECT AND WITHIN THE USUAL LIMITS OF COMMERCIAL TESTING PRACTICES.
STATEMENTS MADE AND DATA SHOWN, ARE TO THE BEST OF OUR KNOWLEDGE AND BELIEF, CORRECT AND WITHIN THE USUAL LIMITS OF COMMERCIAL TESTING PRACTICES. ADMINISTRATIVE DATA 1.0 PURPOSE OF TEST For compliance
CE EMC Test Certification
Certification No.: EC57C001 CE EMC Test Certification According to European Standard EN 55022:1998/A1:2000/A2:2003 Class A, EN 61000-3-2: 2000, EN 61000-3-3:1995/A1:2001 and EN 55024:1998/A1:2001/A2:2003
PRECISION TEMPERATURE SYSTEMS. Compact Modular and Upgradeable Thermometry Measurement Systems
6625T SERIES PRECISION TEMPERATURE SYSTEMS Compact Modular and Upgradeable Thermometry Measurement Systems Guildline Instruments 6625T Temperature Measurement System provides demanding users around the
R. Assmann, CERN/AB. for the Collimation Project 7/12/2007 LHC MAC RWA, LHC MAC 12/07
Plan for Collimator Commissioning R. Assmann, CERN/AB 7/12/2007 for the Collimation Project LHC MAC RWA, LHC MAC 12/07 1) Installation Planning and Performance Reach Collimation is an performance-driven
Protection of Hardware: Powering Systems (Power Converter, Normal Conducting, and Superconducting Magnets)
Protection of Hardware: Powering Systems (Power Converter, Normal Conducting, and Superconducting Magnets) H. Pfeffer, B. Flora, and D. Wolff US Particle Accelerator School, Batavia, IL, USA Abstract Along
Abstract. PEGASUS Toroidal Experiment University of Wisconsin-Madison
Abstract Extensive new capabilities have been installed on the Pegasus ST facility. The laboratory has been completely reconfigured to separate all power systems from the main hall. Data acquisition, control,
System Upgrades to the DIII-D Facility
System Upgrades to the DIII-D Facility A.G. Kellman for the DIII-D Team 24th Symposium on Fusion Technology Warsaw, Poland September 11-15, 2006 Upgrades Performed During the Long Torus Opening (LTOA)
DQW HOM Coupler for LHC
DQW HOM Coupler for LHC J. A. Mitchell 1, 2 1 Engineering Department Lancaster University 2 BE-RF-BR Section CERN 03/07/2017 J. A. Mitchell (PhD Student) HL LHC UK Jul 17 03/07/2017 1 / 27 Outline 1 LHC
Customer. KERN MICRO 5 axis Ultra Precision Machining Centre
Customer KERN MICRO 5 axis Ultra Precision Machining Centre The KERN MICRO is an ultra precision machining centre with the highest level of accuracy in 5 axis configuration. The working envelope is 350
UDW Technology Conference Dan McLeod / John Jacobson Lockheed Martin MS2 July 27, Secure Energy for America
RPSEA 09121-3300 3300-05 05 Autonomous Inspection of Subsea Facilities Phase I Final Presentation / Phase II Status Report UDW Technology Conference Dan McLeod / John Jacobson Lockheed Martin MS2 July
R&D for ILC detectors
EUDET R&D for ILC detectors Daniel Haas Journée de réflexion Cartigny, Sep 2007 Outline ILC Timeline and Reference Design EUDET JRA1 testbeam infrastructure JRA1 DAQ Testbeam results Common DAQ efforts
The ATLAS Toroid Magnet
The ATLAS Toroid Magnet SUN Zhihong CEA Saclay DAPNIA/SIS 1 The ATLAS Magnet System The ATLAS Barrel Toroid Mechanical computations on the Barrel Toroid structure Manufacturing and assembly of the Barrel
Site Surveys for Offshore Windfarms: How to Spend your Money Wisely in an Age of Austerity
Site Surveys for Offshore Windfarms: How to Spend your Money Wisely in an Age of Austerity Richard Orren, Global Technical Head, Director Mark Finch, Geotechnical Director Senergy Survey and GeoEngineering
Preparation of RF Power Couplers For the Tesla Test Facility
Preparation of RF Power Couplers For the Tesla Test Facility Axel Matheisen 1 **Feng Zhu 2 *** for the TESLA collaboration* 1 ) Deutsches Elektronen-Synchrotron DESY Notkestraße 85, D 22607 Hamburg, Germany
MEDIUM VOLTAGE COMPACT STARTER TYPE KAE
MEDIUM VOLTAGE COMPACT STARTER TYPE KAE up to 5 MW up to 17,5 kv up to 400 A Mocotech presents the compact motor starter t ype KAE with integrated autotransformer, switches, control and many more advantages.
ECE 214 Electrical Circuits Lab Lecture 8
ECE 214 Electrical Circuits Lab Lecture 8 Vince Weaver http://www.eece.maine.edu/~vweaver vincent.weaver@maine.edu 31 March 2015 Announcements Remember, I am out of town on Tuesday. Lecture will be at
Metrological Telecommunication System Development Project
Philippines Metrological Telecommunication System Development Project 1. Project Profile and Japan s ODA Loan Report Date: March 2001 Field Survey: September 2000 The Philippines Manila Cebu Site Map:
PoS(EPS-HEP2017)476. The CMS Tracker upgrade for HL-LHC. Sudha Ahuja on behalf of the CMS Collaboration
UNESP - Universidade Estadual Paulista (BR) E-mail: sudha.ahuja@cern.ch he LHC machine is planning an upgrade program which will smoothly bring the luminosity to about 5 34 cm s in 228, to possibly reach
Industrial PSU with universal input voltage range ( VAC line to line) and configurable output voltage. North America
World-Wide 3-phase Input Voltage Range (nom. 200 Vrms to 480 Vrms), PF > 0.94 High Power Density 16 W/in 3 94% Typical Efficiency Parallel Operation up to 16 Units (50.4 kw) Cold-Plate Cooling System -25
Inductive adder prototype pulse generator for FCC-hh kickers
Inductive adder prototype pulse generator for FCC-hh kickers D. Woog Acknowledgements: M.J. Barnes, J. Holma, T. Kramer 14/04/2018 David Woog FCC WEEK 2018 1 Content Inductive adder introduction Requirements
CIGRE General Session, Paris 2014 Group Meeting SC B1 Insulated Cables, 27th August, 2014 Results of CAG Questionnaire
1 1. Number of Questionnaires Returned 23 2. Number of suggestions for work 64 3. Suggestions for new work within the scope of SCB1 or for additional work by current Working Groups in? 3.1 cable system
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics Large Hadron Collider Project LHC Project Report 311 High Precision and High Frequency Four-Quadrant Power Converter
Pin photodiode Quality Assurance Procedure
GENEVE, SUISSE GENEVA, SWITZERLAND ORGANISATION EUROPEENE POUR LA RECHERCHE NUCLEAIRE EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH Laboratoire Européen pour la Physique des Particules European Laboratory
The Compact Muon Solenoid Experiment. Conference Report. Mailing address: CMS CERN, CH-1211 GENEVA 23, Switzerland
Available on CMS information server CMS CR -2015/213 The Compact Muon Solenoid Experiment Conference Report Mailing address: CMS CERN, CH-1211 GENEVA 23, Switzerland 05 October 2015 (v2, 12 October 2015)