PHOTOGRAPHS OF THE EQUIPMENT FROM BIG S MANUFACTORY FOR DRILLS AND ROUTERS
|
|
- Elfrieda Stokes
- 5 years ago
- Views:
Transcription
1 PHOTOGRAPHS OF THE EQUIPMENT FROM BIG S MANUFACTORY FOR DRILLS AND ROUTERS General images of the different groups Nr. Name of the machines in the group and the quantity of the machines in the group Separate photograph of one machine from the group Nr. + Nr. of the photographs of different views of the machines Auxiliary equipment - 1pcs. Machine for laser marking of drills and routers 102 Auxiliary equipment - 1pcs. Universal grinding machine with a device for pointing of the ruler ( guide ) for centreless grinding machines for semi-finished pieces ( blanks ) 107_1 107_2
2 Auxiliary equipment - 3 pcs. Machines for washing and rinsing of blanks for drills and routers
3 Control - measuring equipment (Please, see the detailed list after the table) Equipped with measuring devices and tools for control and measuring on the workplace Auxiliary equipment - 1 pcs. Grinding machine for dressing and grinding of diamond- and grind- wheels - ( GEIGER )
4 Auxiliary equipment - 2 pcs. Universal profile - grinding machines for shaping, profiling and grinding of grinding wheels for drills and routers Auxiliary equipment - 3 pcs. Universal round-grinding machines TSCHUDIN
5 Machines (R&F) model for Rough and Finish grinding and other type of operations on blanks of drills and routers - 27 pcs. Machine (R&F) on separate photograph Nr photographs from different views Nr photograph from different view Nr photograph from different view Nr
6 Separate photograph of the machine Nr Machines for grinding of the support and step of the blanks for drills and routers - 21 pcs. 713 photograph from different view Nr photograph from different view Nr photograph from different view Nr
7 Separate photograph of the machine Nr Machines for fluting drills - 9 pcs. photograph from different view Nr photograph from different view Nr photograph from different view Nr.9970
8 Separate photograph of the machine Nr Modified machine for fluting of special drills - 2 pcs photograph from different view Nr.9973 photograph from different view Nr.9974
9 Separate photograph of the machine Nr Machines for pointing of drills and routers - 2 pcs photograph from different view Nr.9976 photograph from different view Nr.9977 photograph from different view Nr.9978
10 Separate photograph of the machine Nr Machines for centreless grinding of the diameter of the blanks - 3 pcs. photograph from different view Nr photograph from different view Nr.9981
11 Separate photograph of the machine Nr Machines for grinding - for creation of the proper length and the chamfer of the blanks 4+4 pcs. = ALL 8 pcs. photograph from different view Nr photograph from different view Nr.9985 photograph from different view Nr.9986
12 Machine for centerless grinding ( TAIWAN ) - 1pcs 1 pcs. ( No detailed photographs ) 9954 Separate photograph of the machine Nr Machines for rough grinding of diameters of blanks for drills and routers ( GRINDER ) - 8 pcs. photograph from different view Nr photograph from different view Nr.9989 photograph from different view Nr.9990
13 Separate photograph of the machine Nr Machines for rough grinding of diameters of blanks for routers ( FLEX- STEP ) - 7 pcs. photograph from different view Nr photograph from different view Nr.9993 photograph from different view Nr.9994 photograph from different view Nr.9996
14 Centrifuge counter Machine - 1pcs. 1 pcs. ( No detailed photographs ) 9957 The Manufactory has an installed extremely powerful dust-collector system with all the needed tubes and connectors for the machines. The dust system consists of 3 circles. 2 of them are "DRY" dust circles which are supplied from 2 pcs. of 17KW electric motors. The 3-rd system is a wet-oil filled system with separate electric motor. All the 3 dust systems have their own outside dust collecting containers with the appropriate dust filters. For the DRY system there are 12 filters ( automatically aircleaned ) in each dust container. The dust system has an installed fire-prevention system with sensors and air valves through the whole trace of the dust tubes ( Please see photographs "9997.jpg", "9998.JPG", 9999.JPG ). Dust system: 999
15 Dust system: 998 Dust system: 997
16 Inventory of measuring devices, diamond wheels and spare parts ( Also Connected with Control measuring equipment above in the table ) Pos. Description Quantity pcs. NEW items Quantity pcs. USED items 1 Microscope Pasameter Micrometer Device for measuring the inner - 1 diameter of drills 5 Diamond Grinding wheels for - 1 R&F D600 ( Group 9945 ) 6 Diamond Grinding wheels for 3 20 R&F D800 ( Group 9945 ) 7 Diamond Grinding wheels for - 10 R&F D1000 ( Group 9945 ) 8 Diamond Grinding wheels for 1 14 R&F D200 ( Group 9945 ) 9 Diamond Grinding wheels for 4 9 R&F D1000 за undercut 10 Diamond Grinding wheels for - 9 the small green machines for NIB ( Group 713 to 716 ) 11 Diamond Grinding wheels for 4 31 the small green machines for undercut ( Group 713 to 716 ) 12 Diamond Grinding wheels for 5 20 the Flex machines ( Group 9956 ) 13 Diamond Grinding wheels for 2 8 the centreless machines model ESO 300 ( Group 9952 ) 14 Diamond wheels for the 2 16 FLUTERS ( fluting machines ) for fluting drills ( Group 9949 ) 15 Diamond Wheels for pointing of drills ( Group 9951 ) could be possibly reworked for other repointing / pointing machines. - 33
17 Pos. Description Quantity pcs. NEW items Quantity pcs. USED items 16 Spindels for ROLLOMATIC - 7 CNC Diamond grinding wheels for 35 - the Universal grinding profile machine ( Group Number 117 and 118 ) 18 Grinding wheels for the 4 3 universal round-grinding machines TSCHUDIN ( Groups Number 119 and 120 ) 19 Diamond grinding wheels for 7 1 Grinding machine for dressing and grinding of diamond- and grind- wheels - ( GEIGER) ( Group Number 114 and 115 ) 20 Diamond Wheels for - 17 ROLLOMATIC CNC A number of different spare On stock On stock parts for R&F machines 22 A number of other different spare parts for the other machines On stock On stock
Diamond Dressing System
Diamond Dressing System for CNCcontrolled dressing of vitrified bonded diamond grinding wheels (V+) and other types 1 Examples of Profiles With this new dressing system you can create a broad range of
More informationISO 9001.CE. MONASET Tool Grinder.
ISO 9001.CE MONASET Tool Grinder www.topwork.com.tw FEATURE CM-A & CM-2 sharpen and recondition complex tool shapes and parts. Turntable and guide bar allows workpieces grinding from different direction.
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More information5 AXES TOOL GRINDING MACHINE
5 AXES TOOL GRINDING MACHINE Speciall Desiged for Stadard/Cople Tools Maufacturig & Re-Sharpeig of Tools ad Cutters 19/52 KW SPINDLE POWER for very high material removal Rate with excellent low Speed Work-piece
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationCNC Dressing Discs. Precision Engineering Solutions
CNC Dressing Discs Precision Engineering Solutions CNC Dressing Discs CNC dressing discs can be used as an alternative to full form diamond dressing rolls by allowing the user to generate profiles using
More information2-01 EXTERNAL GRINDING
2-01 EXTERNAL GRINDING 9.3.2016 2-02 EXTERNAL GRINDING Type Sketch Details Stock Page ø 75-175 mm, flat and external cylindrical grinding resin ceramic bond, diamond & CBN 2-04 1A1 ø 200-400 mm, flat and
More informationPferd CC Grind grinding discs
Pferd CC Grind grinding discs CC-Grind Solid grinding disc Provide a 40% higher performance in compare with Noise and vibration reduced by 50%, dust reduced by 80%. Extremely robust and as safe as a grinding
More informationGash. End Face. Clearance angle. Flute APPLICATION GUIDE
Gash End Face Clearance angle Flute APPLICATION GUIDE TOOLGAL S BONDS TOOLGAL BONDS ARE DIVIDED INTO 4 MAIN GROUPS: Phenol group (Toolgal code CB) Pressed with thermal stability - 200 0 C Main applications:
More informationSuper Abrasives. Technical Information 276 Grinding Wheels 277 Diamond Dressing Tools 283
Technical Information 276 Grinding Wheels 277 iamond ressing Tools 283 275 Technical Information The Flexovit Super Abrasive range provides technical solutions for the most popular applications encountered
More informationTotal Related Training Instruction (RTI) Hours: 144
Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations
More informationFMR-010 1/32 Scale Vietnam-era AH-1G Rocket Pods (M-158, M-200)
P.O. Box 126 Tanner, AL 35671-0126 USA www.fireballmodels.info FMR-010 1/32 Scale Vietnam-era AH-1G Rocket Pods (M-158, M-200) Contents: A) 2x M-200 Rocket Pod B) 1x M-200 Decal C) 14x Brass Tube D) 4x
More informationVALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationThe enriched system configuration designed based on the loader head accommodates a wide range of automation needs.
CNC Lathe These are high-precision chucking machines equipped with a general-purpose in-machine loader head. The loading time is shortened substantially through coordinated operation of the loader head
More informationCNC MULTI SPINDLE AUTOMATIC LATHES SCN 26/32HT - SCN 35HT
CNC MULTI SPINDLE AUTOMATIC LATHES SCN 26/32HT - SCN 35HT CNC MULTI SPINDLES SCN 26/32HT - SCN35HT SERIES THE MULTI SPINDLE AND MULTI FUNCTION LATHE Ever since 1992 UTIMAC produces and offers Multi Spindle
More informationK E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
More informationThe leading brand of internal grinder in Taiwan
R Your will Our wheel The leading brand of internal grinder in Taiwan CNC Multi-Function (ID / OD) Grinder for Long Sized Work Pieces CNC Multi-Function (ID / OD) Grinder CNC / NC Internal Grinder High
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationRODIA 75 SPIDER RODIA 90 SPIDER RODIA SPIDER OPERATING MANUAL RODIA 120 SPIDER
RODIA 75 SPIDER RODIA 90 SPIDER RODIA 120 SPIDER RODIA SPIDER OPERATING MANUAL TABLE OF CONTENTS 1. SPECIFICATIONS & ACCESSORIES Specifications & Accessories... 3 2. OPERATING INSTRUCTIONS Setting up your
More informationTENSILKUT ENGINEERING
TENSILKUT ENGINEERING For Accurate Test Specimens Manufacturer of equipment for the accurate preparation of physical test specimens since 1955 SIEBURG INTERNATIONAL, INC. 1901 Clydesdale Street, Maryville,
More informationMACHINE TOOLS GRINDING MACHINE TOOLS
MACHINE TOOLS GRINDING MACHINE TOOLS GRINDING MACHINE TOOLS Grinding in generally considered a finishing operation. It removes metal comparatively in smaller volume. The material is removed in the form
More informationDUTCH TECH TOOLS PVT LTD CORPORATE PROFILE
DUTCH TECH TOOLS PVT LTD CORPORATE PROFILE Dutch Tech Tools Pvt Ltd A company of Dedicated, Disciplined and Determined team consisting of Disciplined Dedicated Determined highly skilled professionals and
More informationLHG CNC Hob Sharpening Machine.
LHG-3040 CNC Hob Sharpening Machine www.luren.com.tw Machine Introduction Presentation of High Precision and the Best Performance-To-Price Ratio LHG-3040 CNC Hob Sharpening Machine Luren Precision Co.,
More informationElectro plated Standard Diamond and CBN Grinding Pins, Wheels and Cutting Discs
Electro plated Standard Diamond and CBN Grinding Pins, Wheels and Cutting Discs Price List S04/2017 1929 1 The QR-Codes lead you directly to our Online-Shop! All prices are per piece, ex works. 2 Table
More informationCOMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards in the workplace. Wear,
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More informationChallenge & Innovation to become the world best! Shinhan Diamond Dresser.
Challenge & Innovation to become the world best! Shinhan Diamond Dresser www.shinhandia.com S hinhan Diamond Ind. Co., Ltd., the engineering tool manufacturer, has been continuously creating value for
More informationStraight Bevel Gears on Phoenix Machines Using Coniflex Tools
Straight Bevel Gears on Phoenix Machines Using Coniflex Tools Dr. Hermann J. Stadtfeld Vice President Bevel Gear Technology January 2007 The Gleason Works 1000 University Avenue P.O. Box 22970 Rochester,
More informationMachinist NOA (1998) Subtask to Unit Comparison
Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationTorque Specs - Main Caps 1-5 1/2" bolts 100 ft lbs W / CMD# /2" splayed 100 ft lbs Dart s inner head studs 3/8" 7/16" stepped 50 ft lbs
DART MARK IV Iron Big Block - Technical Notes Deck Height... 9.800" & 10.200" Bore... 4.250", 4.500", 4.560" and 4.600" unfinished Main Bearing Size... Standard BBC Main Caps... All 4 bolt - Steel or Ductile
More informationA Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making
DRAFT Version A Pictorial of David Dawes AA400 HFT Thumbhole Stock in the Making Part 1 and finally Part 2 as well Updated: February 2008 By James Mitchell (a.k.a. mitchejc) Note: Building rifle stocks
More informationGRINDING MOULDER AND PLANER KNIVES
BULLETIN 800H GRINDING MOULDER AND PLANER KNIVES Wisconsin Knife Works HSS, AKM, D-2, AND OPTI KNIVES When grinding moulder and planer knives, factors such as grinding wheel types and grit are often a
More informationRESHARPENING & INSPECTION
755 E. Debra Lane, Anaheim, CA 92805 (714) 780-0730 (714) 780-0735 Fax Technical Support Page Case for Resharpening: When the product finish becomes worse, the cutting edge must get dulled, chips become
More informationTable of Contents. Production Options 3. Suggested Tooling 4. Special Considerations 4. Sawing 4. Holding 5. Turning 5. Milling 6.
Table of Contents Production Options 3 Suggested Tooling 4 Special Considerations 4 Sawing 4 Holding 5 Turning 5 Milling 6 Drilling 6 Threading 7 Grinding 7 Buffing and Polishing 8 Deburring 8 Lapping
More informationTACCHELLA PULSAR H 375
TACCHELLA PULSAR H 375 CNC external cylindrical grinding machine in excellent conditions Manufacturer TACCHELLA Model PULSAR H 375 Year of manufacture 2013 Control SIEMENS SINUMERIK 840 D Solution Line
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute
More informationCurve Generation with a sub-diameter tool.
Curve Generation with a sub-diameter tool. By John Nichol www.nicholoptical.co.uk Starting with a flat blank, one of the more efficient ways of generating a concave curve on its surface is to use a sub-diameter
More informationGear Grinding Machine TGW 400 CNC Basic and Option High Speed
Gear Grinding Machine TGW 400 CNC Basic and Option High Speed Basic description of the Generating Gear Grinder Model TGW 400 CNC Basic The machines TGW 400 CNC Basic are modern production machines with
More informationTorque Specs - Main Caps 1-5 1/2" bolts 100 ft lbs W / CMD# /2" splayed 100 ft lbs Dart s inner head studs 3/8" 7/16" stepped 50 ft lbs
DART GEN V Iron Big Block - Technical Notes Deck Height... 9.800" & 10.200" Bore... 4.250" Option (4.500, 4.560 and 4.600) unfinished Main Bearing Size... Standard BBC Main Caps... All 4 bolt - Steel or
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT IV SURFACE FINISHING PROCESS Grinding Grinding is the most common form of abrasive machining. It is a material cutting process which engages an abrasive tool whose cutting
More informationHIGH SPEED CUTTING QUANTITY Excellence in cutting
HYDRAULIC SWING SHEAR MS7-4x2500 HIGH SPEED CUTTING QUANTITY Excellence in cutting STANDARDS: - Swing beam shesrs with Euro design - ESTUN E21s NC Controller System - Motorized blade gap adjustment - 600mm
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationElectron Microscopy Sciences
Electron Microscopy Sciences INSTRUCTIONAL MANUAL CAT. 50120-10 Model 900 Grinding and Polishing Machine P.O. Box 550 s1560 Industry Road s Hatfield PA 19440 1 Introduction The Model 900 is a small, compact
More informationIN-STOCK SUPERABRASIVE TOOLING. abrasive technology. Setting the global standards for Superabrasive Tooling
IN-STOCK SUPERABRASIVE TOOLING abrasive technology Setting the global standards for Superabrasive Tooling WELCOME TO ABRASIVE TECHNOLOGY S UK EXPRESS LINE CATALOGUE....................... This catalogue
More informationKey data. Flexibility for medium-sized workpieces. A member of the United Grinding Group
A member of the United Grinding Group Flexibility for medium-sized workpieces Key data The combines precision and highest productivity in a single machine. Its modular design allows the centerless grinding
More informationBPG Blade Profile Grinder reduces sharpening costs for bevel gear cutter blades
Overview BPG Blade Profile Grinder reduces sharpening costs for bevel gear cutter blades BPG Highlights 3 Highly Productive Patented Gleason processes such as QUICKEDGE grinding and optional Adaptive Control,
More informationYour will Our wheel. The leading brand of internal grinder in Taiwan. CNC Multi-Function (ID / OD) Grinder for Long Sized Work Pieces
Your will Our wheel The leading brand of internal grinder in Taiwan CNC Multi-Function (ID / OD) Grinder for Long Sized Work Pieces CNC Multi-Function (ID / OD) Grinder CNC / NC Internal Grinder High Speed
More informationMLCS Instructions for Bowl and Tray Template Kit #9176/#9179
MLCS Instructions for Bowl and Tray Template Kit #9176/#9179 Tools Needed: Router 1-1/2 h.p. Minimum recommended with a 1/2 collet Forstner bit 3/4-2 recommended depending on template used Drill Press
More informationDevelopment of SelectG7 General Purpose Cylindrical Grinder
TECHNICAL REPORT Development of SelectG7 General Purpose Cylindrical Grinder E. FUKUTA JTEKT has developed a new CNC general purpose cylindrical grinder with a built-in unit enabling manual swiveling of
More informationHigh Frequency/Precision Drives by Design
High Frequency/Precision Drives by Design SPINDEL Master is a line of universal high frequency drives, suited for operation of a wide range of phase AC motors, from standard low speed motors rated 50 or
More informationDRILL BIT SHARPENER MODEL NO: CBS43 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0710
DRILL BIT SHARPENER MODEL NO: CBS43 PART NO: 6480232 OPERATION & MAINTENANCE INSTRUCTIONS LS0710 INTRODUCTION Thank you for purchasing this CLARKE drill bit sharpener. Before attempting to use this product,
More informationKey data. Precision for small workpieces. A member of the United Grinding Group
A member of the United Grinding Group Precision for small workpieces Key data The offers maximum precision for small workpieces. This compact and versatile centerless grinding machine combines speed with
More informationDiscussing the black art of precision grinding, Man looks for mirror finish and sees a Studer. -Grinding perfect punches
Man looks for mirror finish and sees a Studer -Grinding perfect punches Discussing the black art of precision grinding, Tim Middlehurst, President of Hi-Quality Carbide Tooling Inc., said, I guess you
More information6 AXES CNC TOOL GRINDING MACHINES
6 AXES CNC TOOL GRINDING MACHINES Conical relief with S -splitting U-splitting 4-facett with S-splitting 4-facett with X-splitting NC.drills Counteringdrill 3 Flutes Stepdrill conical relief with S splitting
More information20 16 PRODUCT CATALOGUE
20 16 PRODUCT CATALOGUE INTRODUCTION Kristal Cutting Tools became a respectable firm in the market since it is established and stood as an indispensable helper of craftsmen with the superior tools. Kristal
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The
More informationgrinding & polishing 39
grinding & polishing sales@trelawny.co.uk 39 grinding & polishing grinding & polishing - an introduction HOW THEY WORK Floor grinders use a horizontal rotating disc to perform a multitude of tasks, commonly
More information+91-8048762195 Berlin Machine Corporation http://www.berlinmachines.com/ Manufacturer, Exporter, Wholesaler, and Trader of a wide range of precision engineered Industrial Machines and Accessories such
More informationCOMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)
COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,
More informationEFFECT OF RESIN AND GRAPHITE OF THE BRONZE-BONDED DIAMOND COMPOSITE TOOLS ON THE DRY GRINDING BK7 GLASSES
16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS EFFECT OF RESIN AND GRAPHITE OF THE BRONZE-BONDED DIAMOND COMPOSITE TOOLS ON THE DRY GRINDING BK7 GLASSES Shenq-Yih Luo, Tseng-Yi Wang, Tsung-Han Yu
More informationSINK BULL. Solutions For The Stone Shop RAPID Z-CUT AND
SINK BULL AND RAPID Z-CUT Solutions For The Stone Shop SINK BULL FEATURES Finally, an affordable, heavy duty, manual sink milling machine designed for the stone shop. The Sink BULL utilizes a simple, rigid,
More informationElite model AFILAmaq MD CNC
Elite model AFILAmaq MD CNC Automatic carbide tipped circular saw sharpening machine with two CNC axes Elite model AFILAmaq MD CNC Automatic and economical carbide tipped circular saw blade top and face
More informationRECOMMENED TOOLS FOR MACHINING COUNTERTOPS
Fabrication Manual RECOMMENED TOOLS FOR MACHINING COUNTERTOPS 1. Blades a) Segmented blade for porcelain. 4. Polishing Discs a) Silicon Carbide velcro discs for dry use. Grit 60, 120, 220, 400. 2. Grinding
More informationGRINDING. quakerchem.com
OVERVIEW Metal removal fluids (MRF) are used for both machining and grinding applications. As was discussed in the basic training, both applications are similar in that there is an interface between the
More informationKRONOS S. Key data. Precision for small workpieces. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Precision for small workpieces Key data The offers maximum precision for small workpieces. This compact and versatile centerless grinding machine combines speed with
More informationDEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is
More informationTradition and Professionalism
GRINDERS PRODUCING PLANT JSC REPUBLIC OF BULGARIA, ASENOVGRAD YEARS Tradition and Professionalism GRINDERS PRODUCING PLANT JSC CYLINDRICAL GRINDING MACHINES The cylindrical grinding machines are designed
More informationComputer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison
Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison NOA Subtask Task 1 Participates in workplace health and safety practices. 1.01 Maintains a safe workplace environment. 1.02
More informationCentrifugal Casting Machine Company, Inc.
Centrifugal Casting Machine Company, Inc. The world leader in centrifugal casting and permanent mold technology Est. 1940 Art the The Centrifugal Casting Machine Company, Inc. (CCMCO) is the established
More informationReliable solutions with optimised performance
Reliable solutions with optimised performance 3M innovation provides quality you can count on in a full line of premium engineered abrasives and convenient all-purpose abrasive products for use in stock
More informationIf you plan to use a Wolverine Vari-Grind jig, pre-set the position of the variable support arm as follows: Figure 2. Geiger s
Geiger s Evolution Gouge Sharpening System- Quick Start Installation Guide An installation video can be viewed at: www.geigerssolutions.com NOTE: Installation requires a basic Wolverine system and either
More informationWoodCentral's Tool Grinds Page
WoodCentral's Tool Grinds Page Here are some photos of lathe tool grinds submitted by our Turning forum visitors. It is our suspicion that there are as many grinds as there are turners, and that a skilled
More informationCOMPTAKE COMPANY PROFILE 2017
COMPTAKE COMPANY PROFILE 2017 HEATSINK SSD DESIGN WWW.COMPTAKE.COM WWW.COMPTAKE.COM ABOUT COMPTAKE HEADQUARTER (HQ) Established in 2004 by a group of experienced thermal experts Current capital : USD 1,000,000
More informationMachinist A Guide to Course Content
Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice
More informationBefore You Begin... TOOLS & PRODUCT INVENTORY
Fireplace Surround Installation Instructions STANDARD WOOD FRAMING ONLY Congratulations on selecting an Eldorado Fireplace Surround! Eldorado Fireplace Surrounds have been designed to install in just 5
More informationINTRODUCTION TO GRINDING PROCESS
GRINDING PART 2 Grinding Grinding is a material removal process accomplished by abrasive particles that are contained in a bonded grinding wheel rotating at very high surface speeds. The rotating grinding
More informationNEXT ARE (6) BLOCKS THAT MEASURE 7/8"+ (.885") THICK X 1-1/4"+ (1.255") TALL X 1-1/2" (1.500") LONG. SAME DRILL AND TAP PATTERN AS THE 4 ABOVE!!!
1"- 2" - 3" BLOCKS HAVE (4 total) TAPPED 1/4" X 20 in 1" thick face alone AND (2) TAPPED HOLES 3/8" X 16 IN 1" THICKNESS AS SHOWN. BLOCKS ALSO HAVE (6) DRILLED 25/64" HOLES WITH (8) 9/16" COUNTER-BORES
More informationMilling and turning with SINUMERIK:
Milling and turning with SINUMERIK: CNC solutions for the shopfloor SINUMERIK Answers for industry. Simple to set up... Contents Shopfloor solutions for CNC machines with SINUMERIK Milling with the SINUMERIK
More informationTABLE OF CONTENTS. SI No Contents Page No.
TABLE OF CONTENTS SI No Contents Page No. 1 Basic Textile wet Processing Terms 1 2 Sequence of operations in Wet processing of Knitted fabric 2 3 Brief Note on soft flow dyeing 3 4 Details of soft flow
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationManufacturing Science-II (EME-503)
Time: 1 Hour B.Tech. [SEM V (ME-5 All Groups)] QUIZ TEST-1 Manufacturing Science-II ` Max. Marks: 30 Note: Attempt all the questions Q1) How metal is removed in metal cutting? Explain by giving any simple
More informationScheme - G. Sample Test Paper-I
Sample Test Paper-I Marks : 25 Time:1 hour 1. All questions are compulsory. 2. Illustrate your answers with neat sketches wherever necessary. 3. Figures to the right indicate full marks. 4. Assume suitable
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationSINUMERIK live: turning technologies longitudinal turning and plunge-turning. Differences and use with SINUMERIK Operate
SINUMERIK live: turning technologies longitudinal turning and plunge-turning Differences and use with SINUMERIK Operate siemens.com/cnc4you SINUMERIK live - Application technology explained in an easily
More informationHAM Präzision and NUM Over 20 Years of Partnership and Cooperation
HAM Präzision and NUM Over 20 Years of Partnership and Cooperation The Andreas Maier GmbH carbide tool factory, or HAM for short, was founded back in 1969 in Schwendi-Hörenhausen in Baden-Württemberg,
More informationSub-surface milling machines
machines RUWI reserves the right to make changes in accordance with technical progress. Titman Tip Tools Limited Valley Road Clacton on Sea Essex CO15 6PP Tel. (+44) 1255 220 123 Fax: (+44) 1255 221 422
More informationFANUC CNC MANUAL 3 MELT INFO
page 1 / 5 page 2 / 5 fanuc cnc manual 3 pdf Read & Download CNC Machine Manuals without Limits on any device. Your best companion in cnc machine shop. CNC programming operating manuals and many more CNC
More informationCOMPLEX GRINDER OF MILL& DRILL
COMPLEX GRINDER OF MILL& DRILL MODEL: MR-F6 OPERATING INSTRUCTION PLEASE REMEMBER 1. When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk
More informationKASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
More informationGrinding Wheels For Glass Series
Grinding Wheels For Glass Series We have the professional R&D institution and advanced facilities such as numerical control machining, electrical processing and laser processing.with reference to our diamond
More informationRS 15. Key parameters. The universal machine for all tool types. A member of the UNITED GRINDING Group. Creating Tool Performance
Creating Tool Performance A member of the UNITED GRINDING Group RS 15 The universal machine for all tool types Key parameters The RS 15 is a manual universal grinding machine with integrated measuring
More informationOur clients success is our genuine concern
Our clients success is our genuine concern Overview M/S SEINEN is an associate company of Dawood Engineering. It was established in Year 2006, with an aim to provide customers with comprehensive engineering
More informationControl of the Grinding Process Using In-Process Gage Feedback
Control of the Grinding Process Using In-Process Gage Feedback PMRC Industrial Advisory Board Meeting Georgia Institute of Technology October 2000 David Longanbach Overview Research Objective Need for
More informationHELITRONIC BASIC. Key parameters. The entry level to the world of premium tools. A member of the UNITED GRINDING Group. Creating Tool Performance
Creating Tool Performance A member of the UNITED GRINDING Group HELITRONIC BASIC The entry level to the world of premium tools Key parameters Within the HELITRONIC family, the HELITRONIC BASIC system embodies
More informationProduct Catalog. For Distribution Contact Us :
Product Catalog Diamond Polishing Pad Wet Series Ultra D Granite, Engineered Stone, Hard Stone Granite, Engineered Stone, Hard Stone WET Granite Surface Polishing, Granite Edge Polishing, Granite Floor
More informationTABLE OF CONTENTS. SI No Contents Page No.
TABLE OF CONTENTS SI No Contents Page No. 1 Basic Textile Wet Processing Terms 1 2 Sequence of operations in Wet processing 2 3 Brief Note on jigger machine 3 4 Details of jigger machine 4 5 Operating
More informationBrochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening. Patent 3,952,459
Patent 3,952,459 Brochure Includes: Set-up Instructions Operating Instructions Parts List Fundamentals of Drill Sharpening Accurately Sharpens most drills bits. Now, with this one low-cost, simple machine,
More information