Record Adoption of ASTM E b as an Update of SE Nov-12 Page 1 of 5

Transcription

1 17-Nov-12 Page 1 of 5 From Article 2, Mandatory Appendix V V-220 GENERAL REQUIREMENTS (a) The Standard Terminology for Nondestructive Examinations (ASTM E1316) has been adopted by the Committee as SE SE-1316, Section 7 provides the definitions of terms listed in V-230(a). Revise Section 7 to Section D in paragraph (c) For general terms, such as Indication, Flaw, Discontinuity, Evaluation, etc., refer to (d) Paragraph V-230 provides a list of terms and definitions that are Code specific. Paragraph V-230(c) provides a list of terms and definitions that are specific to Section V, Article 2, Appendix VI. V-230 REQUIREMENTS conjunction with this Article: analog image, back scattered radiation, cassette, composite viewing, contrast sensitivity, contrast stretch, densitometer, density (film), digital, digital image, digitize, digital image acquisition system, erasable optical medium, focal spot, fog, geometric unsharpness, image processing, intensifying screen, IQI sensitivity, line pair per millimeter, line pair test pattern, location marker, luminosity, magnetic storage medium, optical density, photostimulable luminescent phosphor, pixel, pixel size, recording media, screen, source, stepwedge, system-induced artifacts, transmission densitometer, and transmitted film density. Change density (film) to film density and move to fit in alphabetically Make the following editorial correction: line pairs per millimeter Delete terms transmission densitometer and transmitted film density

2 17-Nov-12 Page 2 of 5 From Article 6, Mandatory Appendix I I-620 GENERAL REQUIREMENTS (a) The Standard Terminology for Nondestructive Examinations (ASTM E1316) has been adopted by the Committee as SE SE-1316 Section G provides the definitions of terms listed in I-630(a). Revise Section G to Section F in paragraph (c) For general terms, such as Indication, Flaw, Discontinuity, Evaluation, etc., refer to (d) Paragraph I-630 provides a list of terms and definitions which are in addition to SE-1316 and are Code specific. I-630 REQUIREMENTS conjunction with this Article: blacklight; bleedout; blotting; clean; contaminant; contrast; developer; developer, aqueous; developer, dry; developer, nonaqueous; developing time; drying time; dwell time; emulsifier; family; fluorescence; overemulsification; penetrant; penetrant comparator; penetrant fluorescent; penetrant, water washable; post-cleaning; postemulsification; precleaning; rinse; solvent remover. Make the following editorial correction: developer, dry powder

3 17-Nov-12 Page 3 of 5 From Article 8, Mandatory Appendix I I-820 GENERAL REQUIREMENTS (a) This standard terminology for nondestructive examination ASTM E1316 has been adopted by the Committee as SE SE-1316, Section 6, Electromagnetic Testing, provides the definitions of terms listed in I-830(a). Revise Section 6 to Section C in paragraph (c) For general terms, such as Interpretation,Flaw, Discontinuity, Evaluation, etc., refer to (d) Paragraph I-830 provides a list of terms and definitions, which are in addition to SE-1316 and are Code specific. I-830 REQUIREMENTS conjunction with this Article: absolute coil, differential coils, eddy current, eddy current testing, frequency, phase angle, probe coil, reference standard, standard. Delete terms frequency, reference standard, standard

4 17-Nov-12 Page 4 of 5 From Article 9, Mandatory Appendix I I-920 GENERAL (a) Article 30, SE-1316, Section 9, provides the definition of footcandle (fc). Revise Section 9 to Section F in paragraph (a) Definitions of terms for visuale xamination and other methods appear in Article 1, Mandatory Appendix I, Glossary of Terms for Nondestructive Examination.

5 17-Nov-12 Page 5 of 5 From Article 10, Mandatory Appendix VII VII-1020 GENERAL (a) ASTM E1316, Standard Terminology for Nondestructive Examinations, has been adopted by the Committee as SE SE-1316 Section 8 provides the definitions of terms listed in (e). Revise Section 8 to Section E in paragraph