HiGH Current probe. ECT-CPG com shop ECT-CPG com
|
|
|
- Tobias Manning
- 5 years ago
- Views:
Transcription
1 HiGH Current probe The maximum continuous current rating of a spring probe is determined by its design, size and construction. Typical probes are rated from 2 to 8 amps maximum continuously current at working travel. While this is sufficient for most board test applications, higher current applications will require a much more solid and rugged probe to withstand current capabilities of 10 to 150 amps and beyond. Our high current probes features Low resistance plungers PogoPlus Bias Ball construction High Current optimized base material and plating Higher temperature spring design Specialized high current tip geometry Another high current solution is our Feed-Through Plunger probe line. As the name already describes, the plunger moves right through the probe and is made from a single piece, reducing the internal resistance of the probe to a minimum. With increasing current, any resistance within the probe will generate heat. The higher the current the more heat is generated. Another consideration is test cycle time. All probes are rated at continuously current carrying capability. During a test sequence the current might not be present at all time, giving the probe time to cool off and potentially being able to carry far more than the rated amps on the datasheet. Please consult our ECT contact for details on higher or pulsed current applications. shop 81
2 HCP mil (2.54 mm) HCP mil (3.18 mm) 10 A 15 A 1.30 (33.02).330 (8.38) 1.30 (33.02).330 (8.38).054 (1.37).080 (2.03).048 (1.22).500 (12.70).410 (10.41).058 (1.47) 1.15 (29.21).180 (4.57) 1.69 (42.93) 1.56 (39.62) 1.19 (30.23).072 (1.83).300 (7.62).066 (1.68) Standard 1 29 (37) 4 0 (113) Alternate (63) 8 00 (227), Silver plated A B H 10 amps Hole diameter: Ø.067 to.069 (1.70 to 1.75) #51 or 1.70 mm Material Housing: Work-hardened Nickel Silver, Gold plated over hard Nickel Material Post: Phosphorous Bronze, Gold plated Size Additional receptacles see LFRE-25 SPR-25W SPR-25W-1 SPR-25W-2 SPR-25W-3 Ø.060 (1.52) Ø.036 (0.91) Ø.060 (1.52).047 (1.19).370 (9.40).058 (1.47).180 Min. (4.57) 1.57 (39.88) 1.20 (30.48) 1.20 (30.48).975 (24.77).098 (2.49) A B H P.300 (7.62) Ø.100 (2.54) Ø.050 (1.27) Ø.100 (2.54) Ø.050 (1.27).093 (2.36) Standard 1 44 (41) 4 5 (128) Alternate (69) 8 00 (227), Silver plated Terminal Ball: SPR-3W SPR-3W-1 SPR-3W-2 SPR-3Y 15 amps Hole diameter: Ø.094 to.096 (2.39 to 2.44) #41 or 2.40 mm Material Housing: Work-hardened Nickel Silver, Gold plated over hard Nickel Material Post: Phosphorous Bronze, Gold plated HCP 25 B HCP 13 H r=.010 (0.25) 82 shop
3 HCP mil (4.75 mm) HCP mil (4.75 mm) 25 A 35 A 1.32 (33.53).350 (8.89) 1.42 (36.07).350 (8.89).093 (2.36).125 (3.18).081 (2.06) 1.20 (30.48).180 (4.57).092 (2.34).300 (7.62).106 (2.69) SPR-4W.079 (2.01) 1.32 (33.53).180 (4.57).093 (2.36).300 (7.62).140 (3.56) SPR-5W 1.20 (30.48) 1.32 (33.53) SPR-4W-1 SPR-5W (9.40) 1.57 (39.88).111 (2.82) SPR-4W (3.66).975 (24.77) SPR-4Y Standard 0 86 (24) 4 8 (136) Alternate (122) 12 0 (340) 25 amps, Silver plated Terminal Ball: Hole diameter: Ø.107 to.109 (2.72 to 2.77) 2.75 mm Material Housing: Work-hardened Nickel Silver, Gold plated over hard Nickel Material Post: Phosphorous Bronze, Gold plated A B H Ø.156 (3.96) Ø.060 (1.52) Ø.156 (3.96) A B H Standard 3 76 (107) 16 0 (456) Alternate (172) 24 0 (680), Silver plated Terminal Ball: Ø.156 (3.96) Ø.080 (2.03) Ø.156 (3.96) 35 amps Hole diameter: Ø.141 to.143 (3.58 to 3.63) 3.60 mm Material Housing: Work-hardended Nickel Silver, Gold plated over hard Nickel Size HCP 14 H HCP 15 A r=.010 (0.25) r=.010 (0.25) shop 83
4 Feed Through Probe P mil (3.18 mm) P2447-1W 225 mil (5.72 mm) 10 A 20 A Solder Pot Ø.024 (0.61) x.062 (1.57) Deep Terminal Moves with Plunger.085 (2.16).092 (2.34) Solder Pot Ø.052 (1.32) x.188 (4.78) Deep Thru Feed Plunger.156 (3.96).172 (4.37).187 (4.75).036 (0.91).075 (1.90).645 (16.38).030 (0.76).100 (2.54).040 (1.02).095 (2.41).020 (0.51) (29.08).445 (11.30).145 (3.68) Recommended Travel:.066 (1.68) Full Travel:.100 (2.54) -55 C to +105 C Recommended Travel:.200 (5.08) Full Travel:.300 (7.62) Preload Rec. Travel Preload Rec. Travel Standard 5 0 (142) 8 3 (235) Standard 6 0 (170) 14 0 (397) 10 amps 20 amps <10 mohms <10 mohms Hardened BeCu, Gold plated Hardened BeCu, Nickel plated Brass Brass Music Wire Mounting Options Hole diameter: Ø.086 (2.18) #44 or 2.18 mm Mounting Options Hole diameter: Ø.157 (3.99) #22 or 3.99 mm 0 1 Ø.061 (1.55) Ø.090 (2.29) 120 P P2447 1W 84 shop
5 Brute Probe High Current Probe #6-32 Tap x.250 (6.35) Deep.187 (4.75).225 (5.72) Diamond Knurl.154 (3.91) (44.45).100 (2.54).250 (6.35) Travel P4301 up to 50 A.236 (5.99) (35.56).290 (7.37) BR (6.07) BR4301K 1F 1R 1W 1Z 2F 2R Ø.154 (3.91) Ø.154 (3.91) Ø.154 (3.91) Ø.200 (5.08) Ø.154 (3.91) Ø.154 (3.91) Preload Rec. Travel Standard 16 (454) 25.7 (729) Current Rating BeCu: 40 amps Current Rating Tellurium Copper: 50 amps <5 mohms Plunger (1F) Tellurium Copper, Gold plated BeCu, Gold plated Tellurium Copper, Gold plated Ball: Hole diameter: Ø.238 (6.05) #B or 6.05 mm Material Housing: Phosphor Bronze, Gold plated P4301 1F shop 85
6 Godzilla Probe HC375 HC A [78.99] 150 A [69.85].100 [2.54] 5/16-18 UNC THRU [81.67] [72.52].100 [2.54] 1/4-20 UNC-2B THRU.375 [9.53] DIAMOND KNURL.311 [7.89].260 [6.60] MIN TRAVEL.430 [10.92].350 [8.89].500 [12.70].575 [14.61].435 [11.05].260 [6.60] MIN TRAVEL.437 [11.10] 2.400[60.96] [57.28] HCR375 HCR500 DIAMOND KNURL.500 [12.70].562 [4.27] DIAMOND KNURL.600 [15.24] Recommended Travel:.250 (6.35) Full Travel:.360 (9.14) -55ºC to +155ºC Standard (771) 64 (1814) Alternate (680) 96 (2722) 100 amps BeCu Gold plated Brass Silver plated Hole Diameter: Ø.439 (11.15) 7/16 or mm Material Housing: Work-hardend Brass, Gold plated over hard Nickel Recommended Travel:.250 (6.35) Full Travel:.260 (6.60) -55ºC to +155ºC Preload Rec. Travel Standard (626) (6260) 150 amps BeCu Gold plated Brass Silver plated Silver plated Hole Diameter: Ø Ø.5679 (14.50 mm) mm Material Housing: Work-hardend Brass, Gold plated over hard Nickel (additional styles on request) (additional styles on request) Force F Ø.311 (7.89) F Ø.435 (11.05) HC375 F - 4 HC500 F 86 ECT-CPG.com shop.ect-cpg.com Dimensions in inches (millimeters). Specifications subject to change without notice....
Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts
P Y L O N P O G O C O N T A C T S Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts The Pylon Advantage The Pylon Pogo Contact advantage comes
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
Testing the Limits. ISO 9001 REGISTERED COMPANY
Testing the Limits The year is 1965. An upstart newcomer, Everett Charles Technologies, invents the first snap-out spring probe that becomes the industry standard. ISO 9001 REGISTERED COMPANY Now fast-forward
Pogo. Contacts C O N T A C T P R O D U C T S G R O U P. Loaded PCB Test. Bare PCB Test. Wire Harness. Test System Interface
C O N T A C T P R O D U C T S G R O U P Pogo Contacts Loaded PCB Test Bare PCB Test Wire Harness Test System Interface High Current/High Frequency Semiconductor Pogos Battery/Portable Application General
OSTBY BARTON POGO PROBES. Spring Probes for ATE, Connectors, Batteries, Wire Harnesses, Semiconductor Packages and General Purpose Applications
Spring Probes for ATE, Connectors, Batteries, Wire Harnesses, Semiconductor Packages and General Purpose Applications Semiconductor Board Test Custom Pogos OSTBY BARTON POGO PROBES Ostby Barton s Experience
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
contact probes for fine pitches for low heights and for direct soldering
fine pitch probes battery contacts short travel probes contact probes for fine pitches for low heights and for direct soldering Version 1 Contents Fine Pitch Probes page NEW FP01-020-L037 13 NEW FP01-026-L072
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
contact probes for high currents radio frequency and kelvin measurement
high current probes kelvin probes radio frequency probes contact probes for high currents radio frequency and kelvin measurement Version 1 Contents Probe max. Current Page High Current Probes 1860C001
Micro Precision Apertures
National Aperture, Inc. Micro Precision Apertures Product Guide Precision apertures, targets and patterns, including round, slit, square, etc., for universal and high power applications National Aperture,
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
Spring Contact Probes
Spring Contact Probes general Catalogue 2012 Probe Page F050 16 F051 17 F075 20 F086 150 F100 26 F109 54 F111 39 F112 40 F113 39 F150 60 F175 72 F190 60 F192 48 F193 60 F205 53 F206 52 F207 53 F209 52
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
ELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
Poke-Home Thru-Wire: WTW
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
QUADSPLITTER AND IN-LINE QUADSPLITTER
QUADSPLITTER AND IN-LINE QUADSPLITTER technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test Condition B shock: MIL-STD-0 Method, Test Condition
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
ReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
Precision Micro-Aperture Catalog
National Aperture, Inc. Precision Micro-Aperture Catalog Version 2012 PLEASE CONTACT: Data Optics, Inc. Distributor for National Aperture, Inc. Phone: (734) 483-8228 (800) 321-9026 Fax: (734) 483-9879
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
Connector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Multiple Gate Nozzles (MGN)
Glass Filled Nylon MGN Multiple Gate Nozzles (MGN) 45% Glass Filled Amodel 20% Copper Filled Resin 45% Glass Filled Ryton Where Innovation Flows 33% Glass Filled Nylon INDEX Multiple Gate Nozzles (MGN)
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
Ø1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
SMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated
SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Chapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
JDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life
Series 300. Miniature Rocker & Paddle Switches
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and
2. Special tools. swiss made
2. Special tools 13 14 2. Special tools SPECIAL 701S tools page 17 Turning tool with profiled insert page 30 Special T-slot cutters and end mills page 25 Offset whirl thread cutters page 31 Step drills
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES
INCH-POUND MIL-DTL-55302/31L 20 July 2007 SUPERSEDING MIL-DTL-55302/31K 9 January 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES This specification
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
PSOL. Remove mounting screws. Remove ears. Add 6" leads PSOL = #12 AWG solid PSTR = #12 AWG stranded
Switch Options Work Smarter Not Harder Arrow Hart custom configured wiring devices can match any of your complex industrial or commercial job needs, simplifying your project and maximizing your bottom
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Contact Size. Contact Wire Max Size Gauge Insulation mm Contact
The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface
High Frequency. ECT-CPG com shop ECT-CPG com
High Frequency HiGH FreQuenCY High Frequency or Radio Frequency (RF) coaxial probes are used for testing high speed circuits in a variety of industries including automotive, wireless communications, satellite,
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
SRICOM SRINAR COMMUNICATIONS PVT. LTD.
B A L U N SRICOM & D D F A S S E M B LY SRINAR COMMUNICATIONS PVT. LTD. S R I N A R C O M M U N I C A T I O N S P V T. L T D, called SRICOM in short, is located at Chennai in the southern part of India.
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Voidless Hermetically Sealed Surface Mount Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516
Available on commercial versions Voidless Hermetically Sealed Surface Mount Bidirectional Transient Voltage Suppressors Qualified to MIL-PRF-19500/516 DESCRIPTION This surface mount series of industry
H.G.Cockrill Corporation
Materials experience Aluminum 2011,2024,2017 5052,6061,6063 Investment castings Sand castings (continued) H.G.Cockrill Corporation Catalog and Buyer s guide Iron and steel alloys Products, Capabilities,
VOIDLESS-HERMETICALLY-SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified per MIL-PRF-19500/228. *1N3614 and 1N3957 * JAN, TX, TXV
VOIDLESS-HERMETICALLY-SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified per MIL-PRF-19500/228 DEVICES LEVELS 1N3611 thru 1N3613 JAN, JANTX *1N3614 and 1N3957 * JAN, TX, TXV DESCRIPTION This standard
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Trimmer Capacitors. PTFE Air Tubular Sapphire Air Plate 3mm SMT Microwave Tuning Elements Machining & Turnmill Services
Trimmer Capacitors PTFE Air Tubular Sapphire Air Plate 3mm SMT Microwave Tuning Elements Machining & Turnmill Services PTFE Trimmer PTFE Trimmer Pros: High Voltage Wide Capacitance Range Medium size Cons:
High-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
Probe. Placement P Primer P. Copyright 2011, Circuit Check, Inc.
Probe Placement P Primer P What's Involved? Control Design ICT Friendly UUT Location Location Location Increase your odds in the manufacturing process Good contact Small targets Agilent Bead Probes Suggested
DATA SHEET TWIST DRILLS. D1c DRILLS, TAPS, AND GAGES E.F.Barrett October Trotter and Callaham October 1947 (D1c) May of 7.
TWIST DRILLS DATA SHEET Sheet #: Title: Updated by: Updated: Originally Compiled by: Issued: Revised: Page: D1c DRILLS, TAPS, E.F.Barrett October 1999 Trotter and Callaham October 1947 (D1c) May 1953 1of
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55
SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55
N SERIES Coaxial Connectors
Coaxial Connectors Description The Jy Chyun coaxial N connectors are largely products designed to support the applications of the receptor antennas, station equipment, communication systems, and for test
GHz BGA SOCKET - direct mount, solderless
45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression
OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir of Engineering
KRESS CORPORATION ENGINEERING Design of Thru and Threaded Holes Standard DOC ID 095007 REVISION A TYPE PORTAL OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir
242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
Model 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations