A case of tortuous calcified LAD CTO treated using a "GAIA" guidewire

Size: px
Start display at page:

Download "A case of tortuous calcified LAD CTO treated using a "GAIA" guidewire"

Transcription

1 A case of tortuous calcified LAD CTO treated using a "GAIA" guidewire Yoshiki Uehara The

2 Case 60 y.o., Male Diagnosis; SMI Coronary risk factors; DM, HT Target lesion; LAD CTO

3 Baseline CAG

4 Baseline CAG

5 Baseline CAG

6 Baseline CAG

7 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr)

8 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Wizard 78

9 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; XT-A

10 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; XT-A

11 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

12

13 Gaia specification/structure/performance Basic structure Total Length 1900mm SLIP COAT coating (Hydro Coating) Length 400mm Coil Length 150mm Gaia First:0.010inch Gaia Second:0.011inch 0.014inch PTFE coating Line-up options allow the operator to choose the appropriate wire for a variety of situations Gaia First Gaia Second Diameter : Tip load :1.5gf Diameter : Tip load :3.5gf Long hydrophilic coating provides smooth manipulation when used in conjunction with a support catheter such as Corsair

14 Gaia specification/structure/performance Basic structure Total Length 1900mm SLIP COAT coating (Hydro Coating) Length 400mm Coil Length 150mm Gaia First:0.010inch Gaia Second:0.011inch 0.014inch PTFE coating Gaia First Gaia Second Straight 15mm 6mm Taper 30mm 30mm

15 Gaia specification/structure/performance Tip Structure ~Composite core Composite core Double coil structure transfer torque force to the distal with keeping flexible tip Round core design to the distal end eliminates the Whip motion phenomenon Ropecoil Extend rope coil through tip Enhance joint strength Improve torque force

16 Gaia specification/structure/performance Tip Structure ~Micro cone-tip Gaia micro-cone tip Lower the ball tip s profile to provide better penetration, allowing the wire to more easily enter hard lesions while keeping a flexible tip Gaia micro-cone tip / Ball tip of general Guide Wire

17 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

18 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

19 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

20 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

21 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

22 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Corsair G.W.; Gaia First

23 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Tornus Pro G.W.; Gaia First

24 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Tornus Pro G.W.; Gaia First

25 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) M.C.; Tornus Pro G.W.; Gaia First

26 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr)

27 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) B.C.; Tazuna 2.0mm

28 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) B.C.; Ikazuchi Rev 2.5mm

29 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr)

30 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) Stent; R-ZES mm

31 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) Stent; R-ZES mm

32 PCI for calcified LAD CTO Rt Brachial Approach G.C.; EBU3.75SH (7Fr) Stent; R-ZES mm

33 Final Angiogram PCI for calcified LAD CTO

34 Final Angiogram PCI for calcified LAD CTO

35 Final Angiogram PCI for calcified LAD CTO

36 Summary The CTO in the tortuous calcified LAD was treated. The tapered hydrophilic guidewires were unable to cross the CTO. The Gaia First guidewire was able to penetrate and trace the tortuous calcified CTO lesion.

37 Tapered hydrophilic guidewire Let the wire go as wire wish. When the wire go wrong way, an operator have to stop the wire from moving forward any more.

38 "GAIA" guidewire Make the wire go as operator wish. The operator should identify a proper route inside the CTO.

39

40

41

42

43

44

45

46 Thank you for your attention.

The Current CTO Toolbox

The Current CTO Toolbox The Current CTO Toolbox R. Michael Wyman, MD Director, Cardiac Catheterization Laboratory and Cardiovascular Interventional Research Torrance Memorial Medical Center Torrance, CA Disclosure Statement of

More information

Guidewires for the CTO Interventionalist. William L. Lombardi MD FACC FSCAI Peacehealth St. Joseph Medical Center Bellingham WA

Guidewires for the CTO Interventionalist. William L. Lombardi MD FACC FSCAI Peacehealth St. Joseph Medical Center Bellingham WA Guidewires for the CTO Interventionalist William L. Lombardi MD FACC FSCAI Peacehealth St. Joseph Medical Center Bellingham WA Guide Wire Components 1. Core Material 2. Core Diameter 3. Core Taper 4. Tip

More information

How to Penetrate the Proximal and Distal Fibrous Caps in Chronic Total Occlusion?

How to Penetrate the Proximal and Distal Fibrous Caps in Chronic Total Occlusion? April 27 th, 2006 Seoul, Korea How to Penetrate the Proximal and Distal Fibrous Caps in Chronic Total Occlusion? Masahiko Ochiai MD, FACC, FESC, FSCAI Division of Cardiology and Cardiovascular Surgery

More information

Anatomy of Contemporary CTO Guidewires and Selection Criteria

Anatomy of Contemporary CTO Guidewires and Selection Criteria Anatomy of Contemporary CTO Guidewires and Selection Criteria Craig A. Thompson, M.D., MMSc. Director, Invasive Cardiology and Vascular Medicine Yale University School of Medicine New Haven, CT USA Disclosure

More information

Welcome to the 7 th European Bifurcation Club October LISBON. Side Branch access session

Welcome to the 7 th European Bifurcation Club October LISBON. Side Branch access session Welcome to the 7 th European Bifurcation Club 14-15 October 2011 - LISBON Side Branch access session Role of dual-lumen catheter support Caress Sapporo Hokko Memorial Hospital Sapporo, Hokkaido Japan Yoichi

More information

CROSS YOUR WAY SUPPORT CATHETERS GUIDEWIRES CROSSING CATHETERS RE-ENTRY DEVICES

CROSS YOUR WAY SUPPORT CATHETERS GUIDEWIRES CROSSING CATHETERS RE-ENTRY DEVICES CROSS YOUR WAY Medtronic offers a robust crossing portfolio toolkit to help you confidently navigate tortuous vasculature and cross complex lesions. No matter your preferred crossing method, Medtronic

More information

Devices for Enteroscopes

Devices for Enteroscopes Single-Use Biopsy Forceps 16.1 Single-Use Injection Needles 16.1 Single-Use Cleaning Brushes 16.2 Single-Use Guide Wires & E.R.C.P. Catheters 16.2 Single-Use Sphincterotomes 16.3 Single-Use Stent Placement

More information

Leading the Way in Guide Wire Technology

Leading the Way in Guide Wire Technology 1/13 Leading the Way in Comprehensive portfolio of guide wires Advanced Technology Abbott Vascular Guide Wires / Indications: This HI-TORQUE Guide Wire is intended to facilitate the placement of balloon

More information

ERCP Papillotomes, balloons, guide wires and baskets.

ERCP Papillotomes, balloons, guide wires and baskets. Papillotomes, balloons, guide wires and baskets. REF Lumens Tip length mm Working length mm Cutting wire length mm Partly insulated cutting wire Papillotome DSP-30525-111111 3 5 2000 25 no DSP-30225-111111

More information

Coronary guidewires for chronic total occlusion procedures: function and design

Coronary guidewires for chronic total occlusion procedures: function and design SPECIAL FOCUS y Chronic total occlusions Special report Coronary guidewires for chronic total occlusion procedures: function and design Guidewires provide the primary interface between percutaneous coronary

More information

Wire Technology: How to Choose Based on Anatomy and Strategy

Wire Technology: How to Choose Based on Anatomy and Strategy Wire Technology: How to Choose Based on Anatomy and Strategy Craig M. Walker, MD, FACC, FACP Clinical Professor of Medicine Tulane University School of Medicine New Orleans, LA Clinical Professor of Medicine

More information

Medical Division Precision in diagnosis and therapy. Guide wires

Medical Division Precision in diagnosis and therapy. Guide wires Medical Division Precision in diagnosis and therapy. Guide wires Our guide wires are market leaders. Guide wires Guide wires, straight or with J-tip Size Outer Length Wire Core wire/ strip Core wire Distal

More information

ion Ixion Instruments Instruments Ixion TM Instruments are all made from German Surgical Stainless Steel with a satin fi nish which reduces glare.

ion Ixion Instruments Instruments Ixion TM Instruments are all made from German Surgical Stainless Steel with a satin fi nish which reduces glare. i ion Instruments Ixion TM Instruments are all made from German Surgical Stainless Steel with a satin fi nish which reduces glare. All cutting edges are made from Carbide inserts providing superior strength

More information

MICRO-TECH Disposable biopsy forceps.

MICRO-TECH Disposable biopsy forceps. MICRO-TECH Disposable biopsy forceps. Disposable biopsy forceps Disposable biopsy forceps. The disposable biopsy forceps from MICRO-TECH allow you to take diagnostically conclusive tissue samples or to

More information

(Biomedical Engineering Design) Spring 2009

(Biomedical Engineering Design) Spring 2009 BME 3013 (Biomedical Engineering Design) Spring 2009 Project #27# 27: Manipulatable Intracoronary Wire MID- SEMESTER REPORT March 11, 2009 TEAM MEMBERS: Allison McArton (Team Leader) Angwei Law (Communicator)

More information

EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2010/51

EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2010/51 (19) (12) EUROPEAN PATENT APPLICATION (11) EP 2 263 736 A1 (43) Date of publication: 22.12.2010 Bulletin 2010/51 (51) Int Cl.: A61M 25/09 (2006.01) (21) Application number: 10165921.7 (22) Date of filing:

More information

Coatings. The Merit Hypotube. Coated Guide Wire Components. Coated Mandrels & Stylets. Coated Needles. Coating Services & Capabilities

Coatings. The Merit Hypotube. Coated Guide Wire Components. Coated Mandrels & Stylets. Coated Needles. Coating Services & Capabilities Coatings Merit Medical OEM offers PTFE and hydrophilic coatings, as well as further manufacturing and finishing services, for medical tubes and wires used in medical devices. The Merit Hypotube Center

More information

Successful endovascular treatment for BTK lesion using wire rendezvous technique and retrograde knuckle wire technique by collateral approach

Successful endovascular treatment for BTK lesion using wire rendezvous technique and retrograde knuckle wire technique by collateral approach Successful endovascular treatment for BTK lesion using wire rendezvous technique and retrograde knuckle wire technique by collateral approach Katsutoshi Takayama, MD, Ph.D Department of Radiology and Interventional

More information

Endovascular aortic repair Fenestrated

Endovascular aortic repair Fenestrated Endovascular aortic repair Fenestrated Zenith ENDOVASCULAR GRAFTS MEDICAL www.cookmedical.com/web/aortic-intervention/ Active Fixation Our anchoring barbs are the industry standard for design and migration

More information

(12) Patent Application Publication (10) Pub. No.: US 2012/ A1

(12) Patent Application Publication (10) Pub. No.: US 2012/ A1 US 2012O116354A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2012/0116354 A1 Heuser (43) Pub. Date: May 10, 2012 (54) DEVICES AND METHODS FOR SMALL (52) U.S. Cl.... 604/528:

More information

Accepts Wire Guide Diameter inch. Stent Diameter mm

Accepts Wire Guide Diameter inch. Stent Diameter mm Order Number Reference Part Number Accepts Wire Guide inch Length Minimum ID inch Fr Formula 418 80 cm Over-the-Wire Delivery System G56605 FOR418-18-80-4-12.018 4 12.068 6.0/5.0 G56606 FOR418-18-80-4-16.018

More information

Single balloon Enteroscope system SIF-Q180 / OBCU

Single balloon Enteroscope system SIF-Q180 / OBCU Single Balloon Enteroscope System Single balloon Enteroscope system SIF-Q180 / OBCU There s only one answer to your requirements: the Single Balloon System from Olympus Despite the rapid technological

More information

Coils, Wire Forms, PRECISION SPRINGS, COILS & WIRE FORMS

Coils, Wire Forms, PRECISION SPRINGS, COILS & WIRE FORMS Coils, Wire Forms, Spring Components and Laser Welded Assemblies PRECISION SPRINGS, COILS & WIRE FORMS We manufacture custom wire components for the Medical, Electronics, Aerospace and Military markets.

More information

(Biomedical Engineering Design) Spring 2009

(Biomedical Engineering Design) Spring 2009 BME 3013 (Biomedical Engineering Design) Spring 2009 Project #27# 27: Manipulatable Intracoronary Wire May 7, 2009 TEAM MEMBERS: Allison McArton (Team Leader) Angwei Law (Communicator) Padraic Casserly

More information

Enhanced Functionality of High-Speed Image Processing Engine SUREengine PRO. Sharpness (spatial resolution) Graininess (noise intensity)

Enhanced Functionality of High-Speed Image Processing Engine SUREengine PRO. Sharpness (spatial resolution) Graininess (noise intensity) Vascular Enhanced Functionality of High-Speed Image Processing Engine SUREengine PRO Medical Systems Division, Shimadzu Corporation Yoshiaki Miura 1. Introduction In recent years, digital cardiovascular

More information

Architectural Candle Holder

Architectural Candle Holder Kiln required CERAMIC ARTS LESSON PLAN Architectural Candle Holder TAKE A HISTORICAL STEP BACK IN TIME AND CREATE A CANDLE HOLDER THAT LOOKS LIKE A STUNNING PIECE OF REKNOWNED ARCHITECTURE. YOU CAN DECORATE

More information

Coatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings

Coatings ASTM B117 SST Salt Spray Test Kesternick Phosphate Zinc E-Coat Dip Spin Coatings Head and Thread types Coatings ASTM B117 Two major types of coating tests: SST Salt Spray Test screws are placed in a container and a salt solution is sprayed on the screws for a number of hours, checking

More information

order online at

order online at F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved

More information

ICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year.

ICC-ES Evaluation Report Reissued June 1, 2010 This report is subject to re-examination in one year. ICC-ES Evaluation Report ESR-2648 Reissued June 1, 2010 This report is subject to re-examination in one year. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council

More information

Casing Equipment Product Portfolio

Casing Equipment Product Portfolio Casing Equipment Product Portfolio Centralizers Bow Spring Centralizer Hinged, Welded & Non-welded Bow Spring Centralizers High Performance One Piece Slip-on Rigid Centralizers Positive Bar Spiralizer

More information

A free-extending two part cannulated screw that will elongate with growth. SURGICAL TECHNIQUE

A free-extending two part cannulated screw that will elongate with growth. SURGICAL TECHNIQUE A free-extending two part cannulated screw that will elongate with growth. SURGICAL TECHNIQUE The Free-Gliding SCFE Screw System, designed to treat the most common hip problem in growing children, SLIPPED

More information

STAHL ENDOSCOPY UROLOGY

STAHL ENDOSCOPY UROLOGY STAHL ENDOSCOPY UROLOGY Customer Service 305-406-2222 CYSTOURETHROSCOPY Accessories Cystoscope adaptor for female 20001 Silicone Cap for instrument channel 20000 Albarran Albarran catheter slide 20201

More information

Adaptors & Extensions

Adaptors & Extensions Quickbits 44 Adaptors & Extensions 44 Offline Driver 45 Drill Adaptor 45 Mini Chuck 46 Fixed Shank Drills 47 Changeable Drills 48 Drill Countersinks 49 TCT Drill Countersinks 50 TCT Counterbore 51 Plug

More information

Fax Japan São Paulo (SP) Tokyo Minato-ku , Minami-Aoyama. St. Jude Medical Brasil Ltda.

Fax Japan São Paulo (SP) Tokyo Minato-ku , Minami-Aoyama. St. Jude Medical Brasil Ltda. Atrial Fibrillation Cardiac Rhythm Management Cardiovascular Neuromodulation Global Headquarters One St. Jude Medical Drive St. Paul, Minnesota 55117 USA +1 651 756 2000 +1 651 756 3301 Fax St. Jude Medical

More information

Punches. SYNEO, the leading edge in medical automation solutions, is. pleased to announce the ISO 9001:2008 certification of its Texas

Punches. SYNEO, the leading edge in medical automation solutions, is. pleased to announce the ISO 9001:2008 certification of its Texas Punches SYNEO MANUFACTURERS VERY PRECISE, SUPER SHARP, DURABLE, HOLE-MAKING CUTTERS FOR PLACING HOLES IN CATHETER-BASED MEDICAL DEVICES. SYNEO CUTTERS ARE MANUFACTURED TO VERY TIGHT TOLERANCES TO ENSURE

More information

(12) United States Patent (10) Patent No.: US 8,500,658 B2

(12) United States Patent (10) Patent No.: US 8,500,658 B2 US008500658B2 (12) United States Patent (10) Patent No.: US 8,500,658 B2 Boyle et al. (45) Date of Patent: Aug. 6, 2013 (54) NICKEL-TITANIUM CORE GUIDE WIRE 5,135,503 A 8, 1992 Abrams 5,341,818 A 8, 1994

More information

ASAHI Peripheral Guide Wire

ASAHI Peripheral Guide Wire ASAHI Peripheral Guide Wire AMK-DT256 Ver.1.01 / 12TS017 SYMBOLS Legal Manufacturer LOT Lot number Do not use if package is damaged REF Catalogue number Do not reuse STERILE EO Sterilized using ethylene

More information

SCANLAN LEGACY. High Precision Titanium Instruments

SCANLAN LEGACY. High Precision Titanium Instruments SCANLAN LEGACY High Precision Titanium Instruments SCANLAN LEGACY Titanium Instruments Since 1921, Scanlan International has been dedicated to working hand-in-hand with surgeons to provide the highest

More information

ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013.

ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013. ICC-ES Evaluation Report ESR-2648 Reissued May 1, 2012 This report is subject to renewal June 1, 2013. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:

More information

Pro-Doweling Kit USER S MANUAL #840. Visit us at

Pro-Doweling Kit USER S MANUAL #840. Visit us at Pro-Doweling Kit USER S MANUAL #840 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Please read this manual carefully and thoroughly

More information

TORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE

TORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE TORNIER MAXLOCK EXTREME Clavicle Plating System SURGICAL TECHNIQUE 2 Table of Contents: Key Design Features...4 Surgical Technique...5 Implants & Instruments...9 3 Key Design Features There are 7 anatomically

More information

IADC Dull Grading for PDC Drill Bits

IADC Dull Grading for PDC Drill Bits IADC Dull Grading for PDC Drill Bits SPE/IADC 23939 First Revision to the IADC Fixed Cutter Dull Grading System ~ 1992 Version 2.4 How is Dull Grading Useful? Quick and simple way to describe the dull

More information

HBS-AP ASSEMBLING INSTRUCTIONS

HBS-AP ASSEMBLING INSTRUCTIONS ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,

More information

Flexible Hypotubes: Lasers Enable Medical Device Delivery. Flexible Hypotubes

Flexible Hypotubes: Lasers Enable Medical Device Delivery. Flexible Hypotubes : Lasers Enable Medical Device Delivery Flexible Tubes David Gillen, Blueacre Technology As medicine advances, surgeons are always seeking to access further into the human body. Minimally invasive, or

More information

Blackhawk by Proto tools comprise of an assortment of striking and struck products including hammers, chisels, punches and pry bars.

Blackhawk by Proto tools comprise of an assortment of striking and struck products including hammers, chisels, punches and pry bars. STRIKING & STRUCK HAMMERS, CHISELS, PUNCHES, & PRY BARS Blackhawk by Proto tools comprise of an assortment of striking and struck products including hammers, chisels, punches and pry bars. This mix of

More information

Copper Cone Earrings Sharilyn Miller

Copper Cone Earrings Sharilyn Miller By Sharilyn Miller Wubbers Jumbo Tapered Round Mandrel Pliers are perfect for creating a cool pair of copper-wire cone earrings! I used 12-gauge half-round wire to make the cones in this sample pair. Half-round

More information

Carbide Reamers...P18. Ejector Pin Counter Bores...P17

Carbide Reamers...P18. Ejector Pin Counter Bores...P17 P1 Carbide Reamers...P18 Ejector Pin Counter Bores...P17 Extended Reach 2 Flute End Mills (For Machining Aluminum) Ball Nose...P15 Square End...P16 Extended Reach 4 Flute Coated End Mills Ball Nose...P11

More information

Champion Instrumentation. Shoulder Repair Made Simpler

Champion Instrumentation. Shoulder Repair Made Simpler Champion Instrumentation Shoulder Repair Made Simpler Champion Instruments Simplicity & Versatility The Champion Shoulder instrumentation system was designed with simplicity in mind. Clever instruments

More information

COFFEE TABLE WITH RECESSED TRAY

COFFEE TABLE WITH RECESSED TRAY COFFEE TABLE WITH RECESSED TRAY Why not treat your guests to a tray laid with delicacies and then remove it from sight in your new coffee table. There's no easier way to show that you are a thoughtful

More information

(8) ANGLE 90. (12) Patent Application Publication (10) Pub. No.: US 2006/ A1. (19) United States UTER SHAFT CURVATURE INNER SHAFT

(8) ANGLE 90. (12) Patent Application Publication (10) Pub. No.: US 2006/ A1. (19) United States UTER SHAFT CURVATURE INNER SHAFT (19) United States US 20060241564A1 (12) Patent Application Publication (10) Pub. No.: Corcoran et al. (43) Pub. Date: Oct. 26, 2006 (54) STEERABLE CATHETER ASSEMBLY (75) Inventors: Neil Corcoran, County

More information

Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS

Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable

More information

ORTHOLINK. 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE

ORTHOLINK. 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE MAXLOCK EXTREME ORTHOLINK 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE Contents Key Design Features 3 Surgical Technique 4 Implants and Instruments 7 Proper surgical procedures and techniques are

More information

LEAD SCREW LINEAR ACTUATORS Profile Rail Linear Actuators

LEAD SCREW LINEAR ACTUATORS Profile Rail Linear Actuators LEAD SCREW LINEAR ACTUATORS Profile Rail Linear Actuators ITAR Helix Linear Technologies, Inc., Beachwood, Ohio COMPANY CULTURE Helix is a global supplier to the Medical Device, Life Science, Security,

More information

UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS

UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS UNIT I PLANE CURVES AND FREE HAND SKETCHING CONIC SECTIONS Definition: The sections obtained by the intersection of a right circular cone by a cutting plane in different positions are called conic sections

More information

MECHANICS TOOLS. Back

MECHANICS TOOLS. Back MECHANICS TOOLS Back FULLER AND FULLER PRO SLIP JOINTS Designed by professionals for professionals, FULLER PRO Slip Joint and Groove Joint Pliers offer a lifetime of performance we guarantee it. The FULLER

More information

GOST TUBING AND COUPLINGS

GOST TUBING AND COUPLINGS GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.

More information

A Coupled Fluid-structure Model of a Therapeutic Ultrasound Angioplasty Wire Waveguide

A Coupled Fluid-structure Model of a Therapeutic Ultrasound Angioplasty Wire Waveguide Dublin Institute of Technology ARROW@DIT Articles School of Manufacturing and Design Engineering 2007-12-01 A Coupled Fluid-structure Model of a Therapeutic Ultrasound Angioplasty Wire Waveguide Graham

More information

John J. Vaillancourt Steven L. Camara Daniel W. French NOTICE

John J. Vaillancourt Steven L. Camara Daniel W. French NOTICE Serial Number Filing Date Inventor 09/152.475 11 September 1998 John J. Vaillancourt Steven L. Camara Daniel W. French NOTICE The above identified patent application is available for licensing. Requests

More information

Students have little or no previous knowledge or skill in the material being covered.

Students have little or no previous knowledge or skill in the material being covered. Youth Explore Trades Skills Description This Activity Plan will enable students to identify the differences between metric and imperial bolts (cap screws). They will learn how to measure a bolt and determine

More information

PERCUSSION DRILLING AND QUALITY BUTTON BITS

PERCUSSION DRILLING AND QUALITY BUTTON BITS PERCUSSION DRILLING AND QUALITY BUTTON BITS Drilling Equipment They can be Hydraulic or Pneumatic Crawler (Surface) Jumbo (Underground) Drilling Tools PRINCIPLES OF PERCUSSION DRILLING IMPACT POWER FEED

More information

Zip Technology. ZipNut and ZipCONNECTOR

Zip Technology. ZipNut and ZipCONNECTOR Zip Technology ZipNut and ZipCONNECTOR Revolutionarily and reliable design Eliminates repetitious turning & cross threading Fits standard bolts vailable in different sizes and materials Leading provider

More information

PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT

PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE

More information

The Sewing Machine Needle

The Sewing Machine Needle The Sewing Machine Needle Production Anatomy 5 Needles Loved by Sewists 5 Needles Loved by Quilters??? Needle Production From the needle wire to SCHMETZ quality needles Needle Production Needle Production

More information

Downhole Monitoring Solutions. Medical Instrumentation

Downhole Monitoring Solutions. Medical Instrumentation Downhole Monitoring Solutions 1 Medical Instrumentation Forward Looking Statements This corporate presentation contains forward-looking statements, which reflect the Company s current expectations regarding

More information

SCREWDRIVers, multi-bit tools & hex keys

SCREWDRIVers, multi-bit tools & hex keys 66 SCREWDRIVers, multi-bit tools & hex keys INNOVATIVE MULTI-TOOLS DESIGNED TO DELIVER EASE & DURABILITY TO TACKLE ANY JOB The innovative lineup of IRWIN Multi-Bit Drive Tools has been designed to address

More information

USER MANUAL PRO & HOME SERIES (Radius Shoulder Profile)

USER MANUAL PRO & HOME SERIES (Radius Shoulder Profile) USER MANUAL PRO & HOME SERIES (Radius Shoulder Profile) Dual Blade Tenon Cutters Lumberjack Tools Inc. PO Box 730 Chippewa Falls, WI 54729 www.lumberjacktools.com Email: info@lumberjacktools.com Phone:

More information

SECTION 2. AMERICAN Pipe Joints

SECTION 2. AMERICAN Pipe Joints SECTION 2 AMERICAN Pipe Joints The AMERICAN Fastite Joint is a pushon type joint meeting all the rigorous requirements of AWWA C111. The ANSI/AWWA C600 Standard covers in detail the installation of ductile

More information

Roller Burnishing Tools

Roller Burnishing Tools Roller Burnishing Tools The company DREX -TOOLS has since 1980 a great experience in the fields of the burnishing. The company, with the support of technical assistance with big experience has created

More information

Bits for hand power tools

Bits for hand power tools Bits for hand power tools Products Page Adaptors 232-233 nterchangeable boring bits 233 Boring bits 234~237 Mortise chisel & bit set 237 Plug cutters & ets 238-239 Forstner bits 240-241 Brad point bits

More information

Making a Small Four Claw Collet.

Making a Small Four Claw Collet. Making a Small Four Claw Collet. Making a four claw collet is a very handy skill to have. These collets are quite readily available from the supply houses and the smaller sizes are very cheap. But knowing

More information

Procedure for Wrench Calibration and Snug Tightening

Procedure for Wrench Calibration and Snug Tightening Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure

More information

limiting factor on the thread type used.

limiting factor on the thread type used. 1 Definition The diameters, threads per inch (TPI) and thread pitch, etc. are necessary to completely identify a thread. In a shop, specialty gauges are required to accurately gauge or identify threads.

More information

An Acoustic Fluid-structure Simulation of a Therapeutic Ultrasound Wire Waveguide Apparatus

An Acoustic Fluid-structure Simulation of a Therapeutic Ultrasound Wire Waveguide Apparatus Dublin Institute of Technology ARROW@DIT Conference Papers School of Manufacturing and Design Engineering 2005-01-01 An Acoustic Fluid-structure Simulation of a Therapeutic Ultrasound Wire Waveguide Apparatus

More information

The importance of precision cutting requires special accessories

The importance of precision cutting requires special accessories Microstops and Drilling Accessories The importance of precision cutting requires special accessories to aide in drilling accuracy, providing tighter tolerances while protecting surface areas from skin-damage.

More information

Multi-Wing Z Series Fans Blade Pitch Angle Setting Instructions

Multi-Wing Z Series Fans Blade Pitch Angle Setting Instructions Multi-Wing Z Series Fans Blade Pitch Angle Setting Instructions Before You Begin: To maintain balance of fan: Mark the hub castings across a joint, so the fan hub can be reassembled in the same orientation.

More information

Coffee table with recessed tray

Coffee table with recessed tray Coffee table with recessed tray Dinner is served Coffee table with recessed tray This coffee table has it all: it contains a recessed tray, so that you can treat your guests to various delicacies. 1 Introduction

More information

P l i e r s. I n s u l a t e d t o o l s V. - U n i v e r s a l p l i e r s - tools MC4CE MS4 MS11 MC11CE MC13CE MS13

P l i e r s. I n s u l a t e d t o o l s V. - U n i v e r s a l p l i e r s - tools MC4CE MS4 MS11 MC11CE MC13CE MS13 MC4CE - U n i v e r s a l p l i e r s - MS4 P l i e r s MC11CE MS11 MC13CE MS13 Difference between insulated and insulating tools - Difference between insulated and insulating tools INSULATED TOOLS : Safety

More information

Powered cutting equipment. Straight Handpiece Contra-angle Handpiece Air Turbine Handpiece

Powered cutting equipment. Straight Handpiece Contra-angle Handpiece Air Turbine Handpiece Lec.3 أ.م. مثنى شعبان رجب Powered cutting equipment Handpiece: Is a device for holding rotary instruments, transmitting power (Source of power is motor or air) to them, and for positioning them intraorally.

More information

Installation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes

Installation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes Installation Instructions Split Shake, Staggered Shake, Shingle, Perfection Shingle, and Shapes General Guidelines These instructions show one type of installation and are intended for the professional

More information

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1 F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and

More information

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS

ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill

More information

Insert Inch Overview. Insert Overview

Insert Inch Overview. Insert Overview Insert Overview The Inserts Millstar inserts are fully ground precision inserts for better chip control, faster metal removal and higher surface accuracies. They are far more accurate than pressed and

More information

Wide range in small dimensions

Wide range in small dimensions Wide range in small dimensions The complete solution for Minilaparoscopy The complete solution for Minilaparoscopy The use of 3.5 mm instruments and appropriate trocars leaves behind only very small scars

More information

HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC

HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC HEALTHCO HIGH PRECISION TWEEZERS Straight and Tapered Straight Angled and Curved ANTIMAGNETIC 3c-H-101 HEALTHCO Precision Straight Tip Tweezer 9.0 mm -.355 in. l-h-109 HEALTHCO High Precision Straight

More information

Measuring Pipes and Pipe Fittings

Measuring Pipes and Pipe Fittings Measuring Pipes and Pipe Fittings by Larry Johnston When you repair or modify home plumbing, knowing the kind and size of pipe you need can save you time and trouble not to mention trips to the hardware

More information

Thread and End Connection

Thread and End Connection www.swagelok.com and End Connection I d e n t i f i c a t i o n G u i d e Contents Introduction and End Connection Terminology.. 4 General Terminology................... 5 Step-by-Step Identification

More information

The Design & Test of Broadband Launches up to 50 GHz on Thin & Thick Substrates

The Design & Test of Broadband Launches up to 50 GHz on Thin & Thick Substrates The Performance Leader in Microwave Connectors The Design & Test of Broadband Launches up to 50 GHz on Thin & Thick Substrates Thin Substrate: 8 mil Rogers R04003 Substrate Thick Substrate: 30 mil Rogers

More information

Design a Clay Rattle

Design a Clay Rattle Design a Clay Rattle For this assignment you will create a clay rattle, and then design the outside of the rattle with a simple design. This simple design could reflect that of Celtic designs, or a simple

More information

Robots in Contact with the Enviroment

Robots in Contact with the Enviroment Robots in Contact with the Enviroment If the tip is in free space, you can calculate the dynamics using a LaGrangian formulation. If the tip is anchored to a wall, you can calculate the tip forces using

More information

Second Semester Session Shri Ramdeobaba College of Engineering & Management, Nagpur. Department of Mechanical Engineering

Second Semester Session Shri Ramdeobaba College of Engineering & Management, Nagpur. Department of Mechanical Engineering Second Semester Session- 2017-18 Shri Ramdeobaba College of Engineering & Management, Nagpur. Department of Mechanical Engineering Engineering Drawing Practical Problem Sheet Sheet No.:- 1. Scales and

More information

Cutting Accessories Micro Burs

Cutting Accessories Micro Burs Cutting Accessories Micro Burs CORE Micro Drill 5400-15 CORE Micro Drill Micro Drill Attachments 5100-15-250 MD Series Straight Attachment 5100-15-270 MD Series Long Straight Attachment 5100-15-252 MD

More information

JIET - TRAINING SCHEDULE PAGE 1 TRADE: ELECTRICIAN. ID3 Recall applicable grievance procedures. Pass a questionnaire with at least 80%.

JIET - TRAINING SCHEDULE PAGE 1 TRADE: ELECTRICIAN. ID3 Recall applicable grievance procedures. Pass a questionnaire with at least 80%. JIET - TRAINING SCHEDULE PAGE 1 TRADE: ELECTRICIAN INDUCTION ID1 Recall applicable sections of the Manpower Training Act (No 56, 1981), with special reference to discipline and legal responsibilities.

More information

PANEL FABRICATION PROCESS

PANEL FABRICATION PROCESS PANEL FABRICATION PROCESS PANEL FABRICATION MACHINE SPECIFICATIONS- FEATURES AND USAGE Features: Fabrication machine has the advantage of having a beautiful appearance, design, reliable quality, easy operating

More information

HOLYTEK. ,MJt1NTAINING YO ~TOOLS AND PRODJ,JCT QUALITY JUST G EASIER

HOLYTEK. ,MJt1NTAINING YO ~TOOLS AND PRODJ,JCT QUALITY JUST G EASIER ,MJt1NTAINING YO ~TOOLS AND PRODJ,JCT QUALITY JUST G EASIER.?;.~::;,I~:~ 1~:~:: ~~ ~'::; - sfp~l'forinaft~~jim :... ~)'~;l.lse~:ln'w60d~orkingandother. applications. This series of equiprnent makes grinding

More information

Why Use. Pilot Assemblies. The New Industry Standard

Why Use. Pilot Assemblies. The New Industry Standard Why Use Pilot Assemblies The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 01/17 - Rev. 11

More information

Copper Cone Earrings Sharilyn Miller

Copper Cone Earrings Sharilyn Miller By Sharilyn Miller Wubbers Jumbo Tapered Round Mandrel Pliers are perfect for creating a cool pair of copper-wire cone earrings! I used 12-gauge half-round wire to make the cones in this sample pair. Half-round

More information

woodworkersjournal.com MATERIAL LIST

woodworkersjournal.com MATERIAL LIST MATERIAL LIST T x W x L 1 Legs (2) 1 1 2" x 3 1 2" x 36 7 16" 2 End Uprights (2) 1 1 2" x 3 1 2" x 32 1 2" 3 Stringers (4) 1 1 2" x 3 1 2" x 42" 4 Top Cladding, Long (2) 3/4" x 7 1 4" x 65 3 4" 5 Side

More information

EASY TURNING TOOLS. MICRO EASY ROUGHER Replacement Cutter Option: Ci6-R1

EASY TURNING TOOLS. MICRO EASY ROUGHER Replacement Cutter Option: Ci6-R1 EASY WOOD TOOLS Specs Price & Specs Sheet EASY TURNING TOOLS Cutter EWT # Retail Maple Handle - 9" Tool Bar - 3/8" x 3.5" Overall Length - 12.5" EASY START ROUGHER 9520 $ 59.99 Ci3 EASY START FINISHER

More information

Original Designs for the Doll Industry, Inc. PO BOX 174 JAMESTOWN, MISSOURI March 31, 1998 (660) fax (660) Gigi - Painting Ins

Original Designs for the Doll Industry, Inc. PO BOX 174 JAMESTOWN, MISSOURI March 31, 1998 (660) fax (660) Gigi - Painting Ins Original Designs for the Doll Industry, Inc. PO BOX 174 JAMESTOWN, MISSOURI 65046 March 31, 1998 (660) 849-2114 fax (660) 849-2358 Gigi - Painting Instructions GiGi 14 Gigi bydiannaefner by DiannaEffner

More information

Saitama COMPAMED 2017 MEDICA 2017 JAPAN EXHIBITORS EXHIBITORS

Saitama COMPAMED 2017 MEDICA 2017 JAPAN EXHIBITORS EXHIBITORS 2017 MEDICA 2017 November 13-16 in Düsseldorf Saitama JAPAN EXHIBITORS 8b/H21 IMAIZUMI INDUSTRY CO., LTD. 2 KAKOH Co., Ltd.... 3 Kamada Spring Co., Ltd.... 4 KANEKO Manufacturing Co., Ltd... 5 KYOWA SEIKO

More information