Casing Equipment Product Portfolio
|
|
- Eugene Singleton
- 5 years ago
- Views:
Transcription
1 Casing Equipment Product Portfolio Centralizers Bow Spring Centralizer Hinged, Welded & Non-welded Bow Spring Centralizers High Performance One Piece Slip-on Rigid Centralizers Positive Bar Spiralizer Rigid Centralizer Slip-on, Steel and Composite Styles Rigid Centralizer Slip-on, Welded Spiral & Straight Bar (Spiralizer / Solid Body) Stop Collar Hinged Friction Grip, Slip-On Set Screw Style Cement Baskets Slip-On Metal Petal Style Standard Float Equipment (Float Shoes/Collars, Guide Shoe, Cement Plugs, etc.) Specialized Float Shoes Reamer Shoes, Tapered Nose & Jetting Shoes Gryphon Casing Equipment; Manufactured to compliment Gryphon Completion Systems! 4
2 Bow Spring Centralizers 1 Piece Slip-on 1 Piece slip-on design Made to gauge hole size Extremely robust Tolerant to under gauge hole conditions flexible Zero weak points Double curvature bow Increase flow-by-area High restoring force Designed to compress virtually flat to casing ZERO starting and running force API 10D Rated Critical casing/liner runs ECD sensitive wellbores Recommended for use in deviated wellbores, ERD liner/casings and tortuous well paths 5
3 Bow Spring Centralizers Hinged, Welded & Non-weld Heat treated centralizer bows welded directly to Centralizer end ring End ring hinged together Various product types and size combinations Turbulator fins available Usually high restoring force, generated by the centralizer bow compressed into the casing or wellbore. This also provides Increased starting and running force expected API 10D Rated Cost sensitive wells Ran over casing coupling Recommended for use in vertical and slight well bore angles 6
4 Rigid Centralizer - Positive Bar Spiralizer Slip-on Welded Positive Spiralizer has formed positive bar blades welded directly onto the centralizer end bands or Slip-on Heavy Duty Positive Spiralizer is a solid one piece unit with blades welding to the body. Provides positive casing stand-off Spiral blades assist to break linear flow whilst displacing cementing fluids, aiding cement placement Not governed by API Used in all types of well designs Most suited for horizontal and directional well designs Recommended to be run between slip on set screw stop collar(s) or coupling Recommend running all rigids between stop collars to allow centralizer to function as a bearing and to reduce torque 7
5 Rigid Centralizer Slip-on, Composite Style Spiral Blade Manufactured from Thermoplastic Polymer Reduced Torque and Drag when running in hole Thermoplastic material provides lower friction factors Provides positive casing stand-off Spiral blades assist to break linear flow while displacing cementing fluids, aiding cement placement Not governed by API Recommended for use in deviated wellbores, ERD liner/casings and tortuous well paths Horizontal and directional well designs 8
6 Rigid Centralizers Slip-on, Welded Spiral & Straight Bar With and with out set screws Straight spiral direction options Provides positive casing stand-off Not governed by API Cost sensitive wells Used in all types of well designs Most suited for horizontal and directional well designs Favorable in cased hole situations 9
Right technology. Right application. Optimus. Quality where you need it
Right technology Right application Optimus Quality where you need it The Optimus Range Well integrity begins with the cementing process. To achieve a high-quality cement job, Centek provides a range of
More informationCasing while Drilling. Advanced Casing Deployment Drillable Casing Technology
Casing while Drilling Advanced Casing Deployment Drillable Casing Technology Why should operators use our Advanced Casing Deployment tools? Well designs that are at the technical limit based on torque
More informationGlobal Drilling Solutions, Inc
Wellhead Equipment - Casing Heads & Spools Casing Heads Top Connections All heads have standard API Flanges. Optional lockdown screws (two) for bowl protectors or (multiple) for annular seal compression
More informationTRAINING MANUAL. Part 3 REAMERS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 3 REAMERS 1 Purpose of Reamers REAMERS A reamer produces an accurate and highly finished round hole to a much finer tolerance than that produced by a drill.
More informationGun drilled boreholes while drilling
GunDRILL Reamer Gun drilled boreholes while drilling MAKING IT SIMPLE Today s challenging drilling environment demands superior performance from the tools in the BHA especially for 3D, high angle and extended
More informationCasing while Drilling. Enhanced Casing Installation
Casing while Drilling Enhanced Casing Installation CWD Definition, History & Experience Casing while Drilling means utilizing the casing string as the drill string instead of drill pipe. 1907 Reuben Baker
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: C Approved By: Quality Engineer Date: 201-1-9 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationMSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: B Approved By: Quality Engineer Date: 2014-12-16 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
More informationWall Thickness.190" -.730" 4130/4140 to Meet API Grades - J55, K55, N80, L80, C90, C95, T95, P110. Also available in Grades
BLAST JOINTS Blast Joints are heavy wall connectors made up in tubing strings opposite the location where perforations are made in the production casing. These joints resist erosion caused by production
More informationto Hand-Held Drilling When you need a high performance drill for your most demanding applications,
to Hand-Held Drilling When you need a high performance drill for your most demanding applications, Foster & Company has the solution. Our high performance PowerBit drills, unique design and black and bronze
More informationROTARY STEERABLE SYSTEMS TO REDUCE THE COST AND INCREASE THE ENERGY VALUE OF DRILLING DIRECTIONAL WELLS IN OLKARIA GEOTHERMAL FIELD
ROTARY STEERABLE SYSTEMS TO REDUCE THE COST AND INCREASE THE ENERGY VALUE OF DRILLING DIRECTIONAL WELLS IN OLKARIA GEOTHERMAL FIELD George Karimi Kenya Electricity Generating Company Limited Geothermal
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationPRODUCT OVERVIEW NEXT-GENERATION (NXG) SOLUTIONS FOR THE OIL AND GAS INDUSTRY
PRODUCT OVERVIEW NEXT-GENERATION (NXG) SOLUTIONS FOR THE OIL AND GAS INDUSTRY A MULTI ACTIVATION CIRCULATION SUB OILSCO Technologies Multi Activation Circulation Sub - it is a breakthrough technology.
More informationMACHINE TOOL ACCESSORIES
DRILL CHUCKS SERIES 319: MACHINE SHOP DISCOUNT SUPPLY BALL BEARING KEY TYPE SUPER CHUCKS SERIES 319: These chucks, robust in design, have great precision. All parts subject to wear are hardened for high
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationOnGauge. Torque-reduction sealed-bearing roller reamer
OnGauge Torque-reduction sealed-bearing roller reamer The OnGauge* torque-reduction sealed-bearing roller reamer offers fully customizable holegauge maintenance and torque reduction, providing greater
More informationMASONRY TOOLS 370-AF SURE. SURE GRIP-FIBERGLASS HANDLE Sure ridged handle grip provides for comfortable feel and shock resistance
MASONRY TOOLS WASHINGTON PATTERN BRICK HAMMERS Our brick hammers are made of high-grade forged hammer steel Specially heat treated to maintain a keen cutting edge Perfectly balanced and superior in every
More informationVarious other types of drilling machines are available for specialized jobs. These may be portable, bench type, multiple spindle, gang, multiple
Drilling The process of making holes is known as drilling and generally drilling machines are used to produce the holes. Drilling is an extensively used process by which blind or though holes are originated
More informationCompetence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationDiptych Bath Screen Installation Guide
v1 These instructions are for left and right handed screens. The diagrams show a right handed screen. Page i Thank you for purchasing this Diptych Bath Screen. Please study these instructions carefully
More informationMechanical Workshop. Module 7: Tapping and Threading. Academic Services PREPARED BY. January 2012
Mechanical Workshop Module 7: Tapping and Threading PREPARED BY Academic Services January 2012 Applied Technology High Schools, 2012 Module 7: Tapping and Threading Module Objectives After the completion
More informationMaintenance. Equipment for general applications in the work place
Equipment for general applications in the work place 184 Pipe Wrenches Heavy Duty Forged steel jaw provides maximum strength. Full floating hook jaw, provides instant grip, easy release. Large knurl and
More information20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationUNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
More informationSpecial reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)
Special reamers There is a wide category of special reamers, ie non-standard, that are suitable to address particular problems encountered in the finishing holes, both for maintenance of individual pieces
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationOther Lathe Operations
Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady
More informationSeeing through software
Seeing through software Gefei Liu and Cissy Zhao, Pegasus Vertex Inc., USA, explain how the use of advanced software can help engineers see underground by predicting subsurface conditions. Oil well drilling
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationEngineering Data Gas Spring Clamps
Engineering Data Gas Spring Clamps The New Industry Standard This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More informationEG - Engineering Graphics
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S
More informationFACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT. Credit Hour System Metrology Lab 1 MDP 240 (1) Fixed gauges. Metrology laboratory
FACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT Report On: Credit Hour System Metrology Lab 1 MDP 240 (1) Fixed gauges Metrology laboratory Class No: B.N. Student Name Remark Signature
More informationTable of Contents. B. Base Tool Changer...2 MC-6 Manual Tool Changer...2
Table of Contents B. Base Tool Changer...2 MC-6 Manual Tool Changer...2 1. Product Overview... 2 1.1 Master Plate Assembly... 2 1.2 Tool Plate Assembly... 3 1.3 Optional Modules... 3 2. Installation...
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationPEDESTAL OVERHAUL. Some of the tools for a pedestal overhaul. Pedestal work stand
INTRODUCTION A properly greased labyrinth seal will help prevent dust and water damage to the pedestal bearing oil supply and shaft seal area. Properly greased and oiled pedestals rarely require an overhaul.
More informationIndustrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)
Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece
More informationUNIVERSAL DOUBLE BAR SAFETY GATE
N. Unit 5 Stour Valley Business Centre, Brundon Lane, Sudbury CO0 7GB Tel: 0787 377 322 - Fax: 0787 377 433 UNIVERSAL DOUBLE BAR SAFETY GATE Reversible Hinge Design EASY INSTALLATION Universal hinge design
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationProduct Overview. for perfect connections
Product Overview for perfect connections TOOL HOLDERS FOR DRILLING, TAPPING & REAMING Smart solutions for high quality clamping systems in tapping applications Tapping solution range from M1 M200 Quick
More informationThe Point of Sale Cutting Tool Solution for Professionals
The Point of Sale Cutting Tool Solution for Professionals Professional Grade Cutting Tool for Professional Trades Champion s ipac system provides you with professional grade cutting tools in individual
More informationBasket & Screen Data. Cylindrical baskets for simplex and duplex strainers up to 8" size
Basket & Screen Data Cylindrical baskets for simplex and duplex strainers up to 8" size Slant top baskets for Model 510 simplex and Model 570 duplex strainers sizes 8" to 36" Basket and Screen Design The
More informationBritish Columbia Carpenter Apprenticeship Program
British Columbia Carpenter Apprenticeship Program Level 2 Line G Competency G-8 Use Pile Foundations and Shoring 7960003564 Ordering Crown Publications, Queen s Printer PO Box 9452 Stn Prov Govt 563 Superior
More informationSERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationReplacing worn out MS hinges
Replacing worn out MS hinges C. Zavatson, 4-3-2014, rev A For the hinging of ailerons, flaps, inboard gear doors and the elevators of the small tail, Lancair utilized MS20001 hinge material. Unfortunately
More informationInstallation Instructions for. Handrail Component System
Handrail STEP-BY-STEP Installation Instructions for Handrail Component System Rise in Inches Run in Inches 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 8.5 47 45 43 42 40 39 38 36 35 34 33 32
More informationIDEAS E-Learning Course
IDEAS E-Learning Course Welcome to IDEAS E-Learning Courses There are many advantages to E-Learning! Key features among them are: You can study in your own time and at your own pace You can repeat sections
More informationTech Unit No: Approved By: Quality Engineer Date: Lock-Set Packer
Tech Unit No: 0802340000 Revision: A Approved By: Quality Engineer Date: 11-5-2014 Lock-Set Packer Description: The MAP Model Lock-Set Retrievable Casing Packer is a general purpose packer for production,
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 5: Milling Processes DR. SOTIRIS L. OMIROU Milling Machining - Definition Milling machining is one of the very common manufacturing processes used in machinery
More informationHorizontal Directional Drilling (HDD)
Horizontal Directional Drilling (HDD) Horizontal Directional Drilling (HDD) continues to be the most popular method of installing electrical cable, fiber optics, utility conduits and irrigation lines in
More informationTOOLS FOR SIDETRACKING
TOOLS FOR SIDETRACKING BITTEKHNIKA BITTEKHNIKA company was founded in 1996 and it is still developing dynamically. These are the traditions and innovative technologies in design and production of equipment
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationRheem Room Sealed Kit - Installation Instructions. Installation must be carried out by a licenced plumber
Rheem 631275 Room Sealed Kit - Installation Instructions Installation must be carried out by a licenced plumber General The Rheem Room Sealed Balanced Flue Kit is designed to connect to a 631275 heavy
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationInstallation and Operational Instructions for ROBA -DS couplings Type 95. _ (disk pack HF) Sizes
95. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting
More informationChapter 23: Machining Processes: Hole Making Part A (Lathe Operations, Boring, Reaming, Tapping)
1 Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Hole Making Part A (Lathe Operations,
More informationHDL(M)6 Nut/Screw Assembly
HDL(M)6 Nut/Screw Assembly Remove, repair, and reassemble the nut and screw assembly in your HDL series double lock vise. In these instructions when we refer to the front of the vise or nut/screw assembly,
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationModule-3 Lecture-7 Limit guage-2. (Refer Slide Time: 00:12)
Metrology Prof. Dr. Kanakuppi Sadashivappa Department of Industrial and Production Engineering Bapuji Institute of Engineering and Technology-Davangere Module-3 Lecture-7 Limit guage-2 (Refer Slide Time:
More informationIntroducing the next generation of E-Z Bore Machines
Introducing the next generation of E-Z Bore Machines The rise in popularity of OHV motors leaves some flathead E-Z Bore owners thinking their equipment is obsolete. Don't dispose of your old E-Z Bore!
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationGLOBAL PRODUCT CATALOGUE. July 2009 DELTATOOLS.
GLOBAL PRODUCT CATALOGUE DELTATOOLS July 2009 www.boartlongyear.com TABLE OF CONTENTS ABOUT OUR PRODUCTS 4 manufacturing 7 CUSTOM SYSTEMS AND COMPONENTS 11 SAFETY 15 TABLE OF CONTENTS OVERBURDEN CASed
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationJ D SQUARED INC. NOTCH MASTER Tube and Pipe Notcher Operating Instructions
Copyright (c) 2006 J D SQUARED INC. www.jd2.com NOTCH MASTER Tube and Pipe Notcher Operating Instructions Angled Notches PATENT PENDING Straight Notches Offset Notches Tube Clamp Slider Tube Clamp Exploded
More informationWhy Use Guided Keepers
Why Use Guided Keepers Guidance and Retention - ALL-IN-ONE This product may be covered by one or more patents or patent applications. See http://www.standardlifters.com/patents.html for details. 12/13
More informationNEED HDD TOOLS, PARTS & ACCESSORIES?
NEED HDD TOOLS, PARTS & ACCESSORIES? Visit us on-line at straightlinehdd.com STRAIGHTLINE Produce Profitable Solutions In All Ground Conditions. THE RIGHT REAMER AVAILABLE FOR EVERY DRILL. StraightLine
More informationKentwood M509X 5 Head Moulder
TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationWire EDMing One-Piece Stamping Dies
8 121 Wire EDMing One-Piece Stamping Dies Blanking Die Wire EDM has made it possible to produce high quality dies from one piece of tool steel. This method of producing dies with wire EDM can result in
More informationTRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
More informationStepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS
Stepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS PIPING ENGINEERING & PLANT DESIGN Chapter 1. Introduction of Piping Industry & Role of Piping Engineer 1.1.
More informationSCREW FLIGHTS and Auger Blades
SCREW FLIGHTS and Auger Blades Applications Conveyor Spirals Foundation, Piling & Digging Augers Screw Piles & Ground Anchors Archimedean Turbines Ribbon Blenders Decanters... and many more Common Problems
More informationDRILL AND TAP KITS. Features O V E R V I E W. TTT001 Tap Guide for Optical Tables and Breadboards. XE25TG Tap Guide for 25 mm Rails.
DRILL AND TAP KITS Individual Imperial & Metric Plug Taps 115 Piece Bit Set Tap Guides Help Ensure Tapped Holes are Perpendicular to Flat Surfaces TW25 Tap Wrench TTT001 Tap Guide for Optical Tables and
More informationUnequalled accuracy. The Clausing is a precision machine tool built to tolerances that are tightest in the industry " at spindle nose.
CATALOG 1258-4 Unequalled accuracy The Clausing is a precision machine tool built to tolerances that are tightest in the industry. Spindle taper (internal).0002" run-out is within.0002" at spindle nose.
More informationSteel Plate in Oil Rig Blowout Preventer Valves
Design Problem Steel Plate in Oil Rig Blowout Preventer Valves Introduction Design for Performance Alloy selection Radii and stress reduction Design for Production Mould method Orientation and cores Controlling
More informationChapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making
Chapter 23 Machining Processes Used to Produce Round Shapes: Turning and Hole Making R. Jerz 1 2/24/2006 Processes Turning (outside surface) straight, taper, facing, contour, form, cut-off, threading,
More informationThe Lease Pumper s Handbook. Chapter 4 Understanding the Oil Well. Section B DRILLING OPERATIONS
4B-1 The Lease Pumper s Handbook Chapter 4 Understanding the Oil Well Section B DRILLING OPERATIONS No two wells are alike, even if they are located near each other and are drilled into the same oil-bearing
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationAssembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More informationWHAT? WHERE? HOW?
JIGS WHAT? WHERE? HOW? Introduction Mass production aims at high productivities to reduce unit cost and inter-changeabilites to facilitate easy assembly. Jigs are useful in mass production. They provide
More informationOPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT
1. INTRODUCTION Operation and maintenance manual for the series underground CLEARWAY fire hydrant 1 of 7 The designs, materials and specifications shown are subject to change without notice due to our
More informationPOWERMATIC PWBS-14 Bandsaw
POWERMATIC PWBS-14 Bandsaw The versatility of the bandsaw has made it a favorite of woodworkers for decades. The POWERMATIC PWBS-14 Bandsaw was designed to be rugged, accurate and to bring a surprising
More informationUNIT 2.1: Routine check before machines operation. Unit Objectives Tools and Equipment for Routine Check. Spanner Set
UNIT 2.1: Routine check before machines operation Unit Objectives At the end of this unit, you will be able to: 1. Learn about the tools and equipment used for routine check-up of the jack hammer. 2. Types
More informationWork Holding Principles ITCD Rajeev Madhavan Nair
Work Holding Principles ITCD 301-001 Work Holding One of the most important elements of the machining process Work holder includes all devices that hold, grip or chuck a work piece to perform a manufacturing
More informationRetractable Pool Cover
Retractable Pool Cover By: Abdulhadi Alkhaldi, Zachary Keller, Cody Maurice, Bradley Miller, and Patrick Weber Team 12 Midpoint Review Document Submitted towards partial fulfillment of the requirements
More informationChapter 02. Casing and Tubing
Chapter 02 Casing and Tubing Table of Contents Introduction 2-4 Topic Areas 2-4 Learning Objectives 2-4 Unit A: Casing and Tubing Uses 2-4 Unit A Quiz 2-5 Unit B: Typical Casing Strings 2-5 Conductor
More informationBlade Mounting Equipment
Blade Mounting Equipment All prices are in US dollars (USD). All prices are subject to change without notice. Machinist Parallel Bars: Product Information: The Machinist Parallel Bars are used when mounting
More informationW & A PARTS MANUAL STACKER BUSTER LEVEL BANDER. Model No Quality Products from W & A MANUFACTURING COMPANY
W & A PARTS MANUAL 12 ROW @ 38 STACKER BUSTER LEVEL BANDER Model No. 3668 SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff, Arkansas 71611 Phone: (870)
More informationComprehensive Plug and Abandonment Systems
Comprehensive Plug and Abandonment Systems Abandon Your Well. Abandon Uncertainty. Complete, single-trip systems for P&A Schlumberger comprehensive plug and abandonment systems bring certainty and rig-time
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationACCESSORIES.
Rotary, Dividing, & Cross Tables 166 Indexes 167 Dividing Heads 168 Screw Jack Sets 168 Angle Plates & V-Blocks 169 Quick Change Tool Posts & 170-171 CNC Tool Holder Bushings 171 Lathe Chucks 172-177 www.sowatool.com
More information1/4", 3/8", 1/2" Drive Sockets
TECHNICAL EDUCATION SETS 1/4" Drive Sockets 80302 13 Pc. Metric 6 Pt. Socket Set 80125 4mm 80132 10mm 80126 5mm 80133 11mm 80127 5.5mm 80134 12mm 80128 6mm 8 0135 13mm 80129 7mm 80136 14mm 80130 8mm 80137
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationMUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5
operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:
More information