SLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1. Version 8 (Up to date: May 2012)

Transcription

1 SLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1 Version 8 (Up to date: May 2012) b c

2 CONTENT General information and tools_ page 03 Accessories_ page 04 Detail drawings_ page Assembly instruction_ page _03 VERSION INFORMATION: Version 8: Cutting dimensions removed / only as chart in commerce portal available

3 GENERAL INFORMATION AND TOOLS GENERAL INFORMATION: Preparation n Please check the completeness of the delivered parts and their item numbers according to the delivery note and the assembly instruction. n Please check the delivered parts for possible damage. n If several parts are damaged or lost, please contact your responsible retailer. Assembly or installation? n For the assembly of the delivered raumplus-product please go step by step through the working steps described in the assembly instruction. n For the installation of the delivered raumplus-product please go step by step through the working steps described in the installation instruction. INFORMATION: n It is assumed that you have exactly identified all cutting dimensions according to the measurement instruction for raumplus-products. n max. door weight: 60kg. TOOLS: n aluminium saw n allen keys 3/(4)/5mm n 2x open-ended spanner (10mm) n drilling machine n drills Ø6,5/(8,5)/10mm n straight edge (optionally) n rubber mallet n pencil n (side cutter)

4 ACCESSORIES 1_ _ _ _ x 5_ x 6_ xx 7_ xx 8_ xx 2x 2x 10m 9_ xx 10_ _ 12_ 04_05 1_ top roller AIR 2_ pick up element AIR, adjustable 3_ frame screw 32mm 4_ plug for punching hole 5_ gasket only necessary for panels with less than 10mm thickness 6_ top rail AIR 7_ bottom rail AIR 8_ stile S3000 asy. / sym. (w/o fig.) 9_ stile S1500 square (w/o fig.) / asy. / sym. (w/o fig.) 10_ to 12_ synchron fitting set consisting of: 10_ connector, 11_ deflection unit, 12_ wire rope 13_ dividing rail 27mm, optionally (w/o fig.) xx 14_ screw 32mm for dividing rail, optional (w/o fig.) _ plug for punching hole, optionally (w/o fig.) x

5 DETAIL DRAWING EXPLODED DRAWING Füllung Panel 7 OBJECT QUANTITY DESCRIPTION 1 2 top roller AIR 2 2 pick up element AIR adjustable 3 4 frame screw 32mm 4 4 plug for punching hole gasket 6 1 top rail AIR 7 1 bottom rail AIR 8 2 stile S3000 asy synchron fitting set (connector) 13 1 dividing rail 27mm 14 2 screw 32mm for dividing rail 15 2 plug for dividing rail 27 mm x x xx xx xx xx x 1_ sliding door series AIR-B S42 synchron drive 1

6 DETAIL DRAWING PREPARING STILES / CUTTING DIMENSIONS stile S3000 asy./sym. stile S1500 square / asy./sym. top rail AIR top rail AIR dividing rail 27 mm (optionally) stile length = element height stile length = element height rail length = element width - 78mm (S3000) element width - 40mm (S1500) rail length = element width - 78mm (S3000) element width - 40mm (S1500) rail length = element width - 77mm (S3000) element width - 39mm (S1500) Ø10 Ø6,5 CUTTING DIMENSIONS: 06_07 overlapping = 20mm (S1500), respectively 39mm (S3000) element height = opening height - 60mm length rail = element width - 40mm (S1500), respectively element width - 78mm (S3000) min. / max. element height = 700mm / 2500mm min. / max. element width = 500mm / 1200mm max. element weight = 60kg 2_ cut profiles to size and punch holes

7 ASSEMBLY INSTRUCTION Gasket is only necessary for panels with less than 10mm thickness! starting in the middle downside 1_ place panel on a table, affix gasket (only at panels with less than 10mm thickness) place the connector exactly in the middle connector cpl. mount the top rail tight on the panel left door right door connector facing connector facing to the front to the front max.3nm Before assembling the stiles mount the pick up elements according to the following dimensions to the ends of the rails: S3000: 0mm S1500: 19mm Querprofil unten stile When using a dividing rail first mark and drill holes in stiles (Ø6,5mm, Ø8,5mm). 2_ apply stiles with rubber mallet, screw together (max. 3Nm) then check with straight edge

8 ASSEMBLY INSTRUCTION_ left linke sliding Gleittür: door: connector Mitnehmer kpl. facing nach vorne to front Y right rechte sliding Gleittür: door: connector Mitnehmer kpl. facing nach hinten to back Y 08 3_ sliding door series AIR-B S42 synchron drive 1 with dividing rail