PREPARED FOR PREPARED BY
|
|
- Stephen Merritt
- 5 years ago
- Views:
Transcription
1 30-36 DUASLOT WITH VAIABLE SLOT ISE SUBMISSION PACKAGE PEPAED FO Name: Title: Agency: PEPAED BY Name: Title: Phone: Advanced Drainage Systems, Inc.
2 PACKAGE CONTE 1. PODUCT OVEVIEW a. ADS STANDAD SPECIFICATION 2. DUASLOT STANDAD DAWINGS a. SLOT DIMENSIONS b. PIPE CONFIGUATION c. COUPLE BAND FITTING d. ADAPTE FITTING e. GATED ASSEMBLY f. OPEN TOP ASSEMBLY
3
4 ,in (mm) (100) (150) (200) (250) (300) (375) (450) (600) (750) (900) (3000) (2950) (25) (50) (70) (75) (75) (75) (90) (160) (165) (165) (165) (175) (175) (175) (185) (210) (210) (9) (12) (15) (18) (30) (33) (40) (47) (65) (72) (13) (19) (19) (19) (19) (19) (19) (25) (25) (25) O (32) O S W (64mm) O S W (150mm) (95) (100) (120) (125) (130) (100300mm) (100900mm)
5 30"-36" DUASLOT Pipe Dimensions For Variable Slot iser O Shown without Grating (Open Top) S H = ACTUAL SLOT HEIGHT W F PIPE DIAM. PODUCT DESCIPTION H W F O S PODUCT # (Grated) PODUCT # (Open Top) 30" (750mm) Variable Slot iser (150mm) 8.25" (210mm) 2.55" (65mm) 1" (25mm) 1.75" (45mm) 2.25" (57mm) 3090DS 3090DSOT 36" (900mm) Variable Slot iser (150mm) 8.25" (210mm) 2.85" (72mm) 1" (25mm) 1.75" (45mm) 2.25" (57mm) 3690DS 3690DSOT NOTE: Slot Heights to conform to dimensions on project plans. H at each end of each length of DUASLOT to be detailed on Slot Dimensions Layouts for approval 2018 ADS, INC before production. ("ADS") HAS PEPAED THIS DETAIL BASED ON INFOMATION POVIDED TO ADS. THIS DAWING IS INTENDED TO DEPICT THE COMPONE AS EQUESTED. ADS HAS NOT PEFOMED ANY ENGINEEING O DESIGN SEVICES FO THIS POJECT, NO HAS ADS INDEPENDENTLY VEIFIED THE INFOMATION SUPPLIED. THE INSTALLATION DETAILS POVIDED HEEIN AE GENEAL ECOMMENDATIONS AND AE NOT SPECIFIC FO THIS POJECT. THE DESIGN ENGINEE SHALL EVIEW THESE DETAILS PIO TO CONSTUCTION. IT IS THE DESIGN ENGINEES ESPONSIBILITY TO ENSUE THE DETAILS POVIDED HEEIN MEETS O EXCEEDS THE APPLICABLE NATIONAL, STATE, O LOCAL EQUIEME AND TO ENSUE THAT THE DETAILS POVIDED HEEIN AE ACCEPTABLE FO THIS POJECT. EV. DESCIPTION BY DAWING NUMBE: DIA. DET/ET SYSTEM MM/DD/YY CHK'D 4640 TUEMAN BLVD HILLIAD, OHIO NOTE: ALL DIMENSIONS AE ± 1/2 FOOT. DAWN BY: DATE: CK'D BY: SHEET 1 OF 1
6 30"-36" DUASLOT Pipe With Variable Slot iser P L A N V I E W C O S S S E C T I O N H1 H2 PIPE DIAM. PODUCT # (GATED) PODUCT # (OPEN TOP) 30" (750mm) 3090DS 3090DSOT 36" (900mm) 3690DS 3690DSOT E L E V A T I O N NOTE: H1 and H2 vary based on project specifications ADS, INC ("ADS") HAS PEPAED THIS DETAIL BASED ON INFOMATION POVIDED TO ADS. THIS DAWING IS INTENDED TO DEPICT THE COMPONE AS EQUESTED. ADS HAS NOT PEFOMED ANY ENGINEEING O DESIGN SEVICES FO THIS POJECT, NO HAS ADS INDEPENDENTLY VEIFIED THE INFOMATION SUPPLIED. THE INSTALLATION DETAILS POVIDED HEEIN AE GENEAL ECOMMENDATIONS AND AE NOT SPECIFIC FO THIS POJECT. THE DESIGN ENGINEE SHALL EVIEW THESE DETAILS PIO TO CONSTUCTION. IT IS THE DESIGN ENGINEES ESPONSIBILITY TO ENSUE THE DETAILS POVIDED HEEIN MEETS O EXCEEDS THE APPLICABLE NATIONAL, STATE, O LOCAL EQUIEME AND TO ENSUE THAT THE DETAILS POVIDED HEEIN AE ACCEPTABLE FO THIS POJECT. EV. DESCIPTION BY DAWING NUMBE: DIA. DET/ET SYSTEM MM/DD/YY CHK'D 4640 TUEMAN BLVD HILLIAD, OHIO NOTE: ALL DIMENSIONS AE ± 1/2 FOOT. DAWN BY: DATE: CK'D BY: SHEET: 1 OF 1
7 30"-36" DUASLOT Coupler Bands With Variable Slot iser 1" (25mm) 2.375" (60mm) H W A END VIEW SIDE VIEW PIPE DIAM. H W A PODUCT # 30" (750mm) 5" (127mm) 10" (254mm) 16.5" (419mm) 3026DS 36" (900mm) 5" (127mm) 10" (254mm) 20.8" (528mm) 3626DS NOTE: ALL DIMENSIONS AE FO EFEENCE ONLY DAWING #: DAWN BY: APPOVED BY: EVISIONS:
8 30"-36" DUASLOT Adapter With Variable Slot iser 2.5" (64mm) B A END VIEW SIDE VIEW PIPE DIAM. A B PODUCT # 30" (750mm) 36" (900mm) 16.5" 8" (419mm) (203mm) 20.8" 10" (528mm) (254mm) 3062 DS 3662 DS NOTE: ALL FITTNGS DIMENSIONS AE FO EFEENCE ONLY DAWING #: DAWN BY: APPOVED BY: EVISIONS:
9 30"-36" DUASLOT System Assembly With Variable Slot iser - Grated A F G E See Below G F C B B A. Taylor Plug or Similar B. DUASLOT Adapter C. N-12 Pipe D. DUASLOT Coupler Band E. DUASLOT Grate Anchor G G. 1 4" SPHS x 1" Long w/ Washer H. DUASLOT Grate Connector I. 5 16" Hex Head Screw x 3 1 2" Long w/ Washer & 5 16" Wingnut J. Plastic Sleeve Spacer (Goes on I. - Not used w/ 4" DIAM.) K. Hex Head Assembly: 5 16" Hex Head Screw x 3 1 2" Long w/ (2) Washers and 5 16" Hex Nut D H NOTE: Each Cap (A) & Adapter (C) comes with an Anchor (F) Each Coupler Band (E) comes with Hardware - I,J,K, & L K K I I J E 2018 ADS, INC ("ADS") HAS PEPAED THIS DETAIL BASED ON INFOMATION POVIDED TO ADS. THIS DAWING IS INTENDED TO DEPICT THE COMPONE AS EQUESTED. ADS HAS NOT PEFOMED ANY ENGINEEING O DESIGN SEVICES FO THIS POJECT, NO HAS ADS INDEPENDENTLY VEIFIED THE INFOMATION SUPPLIED. THE INSTALLATION DETAILS POVIDED HEEIN AE GENEAL ECOMMENDATIONS AND AE NOT SPECIFIC FO THIS POJECT. THE DESIGN ENGINEE SHALL EVIEW THESE DETAILS PIO TO CONSTUCTION. IT IS THE DESIGN ENGINEES ESPONSIBILITY TO ENSUE THE DETAILS POVIDED HEEIN MEETS O EXCEEDS THE APPLICABLE NATIONAL, STATE, O LOCAL EQUIEME AND TO ENSUE THAT THE DETAILS POVIDED HEEIN AE ACCEPTABLE FO THIS POJECT. EV. DESCIPTION BY DAWING NUMBE: DIA. DET/ET SYSTEM MM/DD/YY CHK'D 4640 TUEMAN BLVD HILLIAD, OHIO DAWN BY: DATE: CK'D BY: SHEET 1 OF 1
10 30"-36" DUASLOT System Assembly With Variable Slot iser - Open Top A F E See Below F C B B A. Taylor Plug or Similar B. DUASLOT Adapter C. N-12 Pipe D. DUASLOT Coupler Band E. DUASLOT Grate Anchor L I. Hex Head Assembly 5 16" Hex Head Screw x 3 1 2" Long w/ Washer & 5 16" Wingnut J. Plastic Sleeve Spacer (Goes on I. - Not used w/ 4" DIAM.) K. Hex Head Assembly: 5 16" Hex Head Screw x 3 1 2" Long w/ (2) Washers and 5 16" Hex Nut L. DUASLOT Band Flanges D K I K I NOTE: Each Cap (A) & Adapter (C) comes with a Cap (F) Each Coupler Band (E) comes with Hardware - I,J,K, & L J E 2018 ADS, INC ("ADS") HAS PEPAED THIS DETAIL BASED ON INFOMATION POVIDED TO ADS. THIS DAWING IS INTENDED TO DEPICT THE COMPONE AS EQUESTED. ADS HAS NOT PEFOMED ANY ENGINEEING O DESIGN SEVICES FO THIS POJECT, NO HAS ADS INDEPENDENTLY VEIFIED THE INFOMATION SUPPLIED. THE INSTALLATION DETAILS POVIDED HEEIN AE GENEAL ECOMMENDATIONS AND AE NOT SPECIFIC FO THIS POJECT. THE DESIGN ENGINEE SHALL EVIEW THESE DETAILS PIO TO CONSTUCTION. IT IS THE DESIGN ENGINEES ESPONSIBILITY TO ENSUE THE DETAILS POVIDED HEEIN MEETS O EXCEEDS THE APPLICABLE NATIONAL, STATE, O LOCAL EQUIEME AND TO ENSUE THAT THE DETAILS POVIDED HEEIN AE ACCEPTABLE FO THIS POJECT. EV. DESCIPTION BY DAWING NUMBE: DIA. DET/ET SYSTEM MM/DD/YY CHK'D 4640 TUEMAN BLVD HILLIAD, OHIO DAWN BY: DATE: CK'D BY: SHEET 1 OF 1
Updated sheet quantities Clarified security camera information and existing network rack approximate location Added and additional light pole
ADDENDUM NO. DATE: November 7, 18 POJECT: OWNE: BID DATE: Marquette High School Parking Lot Improvements Marquette Area Public Schools Wednesday, December 5, 18 at 1: a.m. The following shall be incorporated
More informationMACOMB COUNTY TRAFFIC SIGNAL DETAILS. Michigan Department of Transportation. Traffic and Safety MC-026A THROUGH MC-120A ENGLISH VERSION
Traffic and Safety MACOMB COUNT TAFFIC SINAL DETAILS MC-026A THOUH MC-120A Disclaimer: The information provided is a product of the Michigan Department of Transportation (MDOT) and is intended for your
More informationGas Tube Arresters. Certifications, Device Selection Purpose, Operation, Installation Part Number Construction, Part Marking. General Information
Gas Tube Aestes The Potection Poducts Goup of Wold Poducts Inc., specializing in potection poducts fo AC and DC cicuits, is poud to featue a full line of Gas Tube Aestes. Ceamic Gas Tube Aestes povide
More informationFreeSpace ZA 2120-HZA Zone Amplifier
Poduct Desciption The Bose zone amplifie is designed to povide basic amplification and sound system expansion when using font-end Bose poducts such as FeeSpace integated zone amplifies and ContolSpace
More informationIEEE Broadband Wireless Access Working Group < Modifications to the Feedback Methodologies in UL Sounding
Poject Title Date Submitted IEEE 802.16 Boadband Wieless Access Woking Goup Modifications to the Feedback Methodologies in UL Sounding 2008-01-14 Souce(s) Fed Vook, Jeff Zhuang,
More informationTriMark. Gill Group. Orlando Division - 31 FLINT, MI FOODSERVICE EQUIPMENT PLAN & SCHEDULE TYPICAL GUEST FLOOR ICE MACHINE DETAIL
ACTUAL LOCATION OF EFIGEATION ACK TBD BY ACHITECT 10" HC WATE STUB OUTS, PIPING AND CONNECTIONS TO WATE FILTE AND FOM WATE FILTE TO ICE MACHINE BY BY PC F F FLOO SINK BY PC WATE FILTE BY KEC, MOUNTED BY
More informationE /11/2018 AA
B-3 CU 1 CU 2 CU 3 EVISIONS BY GFI,WP GFI AHU 1 AHU 2 AHU 3 GFI,WP MECH. WOMEN'S 6 MEN'S 7 OFFICE 3 8 TEACE 14 OFFICE 4 9 TC 10 PNL 'A' PNL 'B' A-31 GFI A-33 F A-30 A-28 OFFICE 5 11 GFI A-35 OFFICE 2 5
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationPanel Signage 2.2.A.2 Panel Sign Color: Three colors as selected from manufacturers full range of products.
ADDENDUM NO. DATE: November 0, 08 POJECT: OWNE: BID DATE: Marquette High School Parking Lot Improvements Marquette Area Public Schools Wednesday, December 5, 08 at 0:00 a.m. The following shall be incorporated
More information3. Use base plate as template (see FIG. 4-1) to mark location for fasteners.
Plan the layout of the railing it is the beginning of a successful project. Getting Started... 1. Completely read the application instructions before starting the installation of the railing. 2. Properly
More information2010 KIDS CENTER #6 K-06
K-06 INSTALLATION GUIDELINES USER GROUP: 2-5 RECOMMENDED CREW: 2 people TOOLS REQUIRED: Tape measure Level High- speed 3/8 electric drill w/clutch NOTE: Use of any other driver may result in damage to
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationOPERATOR ADAPTER APCABVA
OPERATOR ADAPTER APCABVA Installation Instructions for Allen-Bradley Bulletin 1494V (Variable Depth) 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
More informationLocker Pedestal Installation Instructions
Locker Pedestal Installation Instructions LK-PED-INST-0314r1 Parts List Single Pedestal Back to Back Pedestal Horizontal Support Tube TS-169 Post Flange TS-190 Post Cap Fasteners Provided: #8 x ¾ round
More informationBASEBALL FOUL POLES SURFACE MOUNTED
Page 1 of 5 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included. Locate and drill holes for concrete footings. See Details A and B for critical information
More informationINSTALLATION, OPERATION & MAINTENANCE. Adjustable Horizontal Water Closet Carrier
INSTALLATION, OPERATION & MAINTENANCE 311 Adjustable Horizontal Water Closet Carrier 311 (Standard Faceplate) 311 (PF Faceplate) 311 (LR Faceplate) 09/01/16 Wade Drains 11910 CR492, Tyler, TX, 75706 Phone:
More informationYardistry. External Display YP *Time required for assembly approximately 1.5-2hrs
Yardistry External Display YP40030 *Time required for assembly approximately 1.5-2hrs Components 4 Packages of Panel Clips (Includes 6 Panel Clips and Hardware) 3 16 1/2 x 16 1/2 Signs (hardware Included)
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationINSTALLATION INTRUCTIONS
INSTALLATION INTRUCTIONS Page 1 of 9 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included (see pages 6,7,8,9). Locate and drill holes for concrete footings.
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More informationBRIDGE RAILING, 4 TUBE B-26-F POST DETAILS MICHIGAN DEPARTMENT OF TRANSPORTATION
\ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x 6" SLOTTED ROUND HEAD BOLTS, WITH 1 PLATE WASHER, 1 LOCK WASHER AND HEX. NUT \ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x
More information12 1/2 89 1/8 29 7/ /4 RIGHT SIDE VIEW DRAWN BY: T. KENNEDY MECH. ENG: W.W. 8/18/2015 8/10/2015 CHECKED BY: S.A.C. ELEC. ENG: J.E.S.
NOTES:. ALL CLEAANCES AE FACTOY ECOMMENDATIONS. CONSULT LOCAL JUISDICTION FO EXACT CODE COMPLIANCE..... FULTON ECOMMENDS MINIMUM CLEAANCE OF " IN FONT OF ELECTICAL PANELS. FULTON ECOMMENDS " CLEAANCE BETWEEN
More informationCity of Medford, Oregon STORMWATER MANAGEMENT PROGRAM (SWMP) TO MEET NPDES PHASE II MS4 COMPLIANCE
City of Medfod, Oegon STORMWATER MANAGEMENT PROGRAM (SWMP) TO MEET NPDES PHASE II MS4 COMPLIANCE FIVE-YEAR PROGRAM FOR MARCH 2004-2009 MARCH 2004 City of Medfod, Oegon STORMWATER MANAGEMENT PROGRAM (SWMP)
More informationDIAMOND. MODEL: WS25 (December, 2006) FLUSH CUT WIRE SAW PARTS LIST P R O D U C T S. Part #
DIAMOND P R O D U C T S FLUSH CUT WIRE SAW PARTS LIST MODEL: WS5 (December, 00) Part #0 Intentionally Blank Table of Contents Description Page No. Saw Component Assembly....-5 Frame Assembly Wire Drive
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationCHEVY TH350/700R AUTO TRANSMISSION TO JEEP 4.0L, ENGINE BLOCKS NEW STYLE
Paso Robles, CA 93447 PAGE 1 OF 5 KIT CONSISTS OF: No. Qty Pat No. Desciption 1. 2 716123 GM ENGINE DOWEL PIN 2. 1 716138-F TORQUE CONVERTER ADAPTER 3. 2 716138-DB DOWEL BOLTS 4. 1 716138-PLT ADAPTER PLATE
More informationDepending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12
XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated
More information96 (Standard Length)
Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation
More informationHopper and Drive Components
January, 07 Lit. No. 7586, Rev. 00 Hopper and Drive Components Model SP-00- & SP-5- Low-Profile Tailgate Spreader Parts List This manual is for SnowEx SP-00- & SP-5- tailgate spreaders with serial numbers
More informationOPERATOR ADAPTER A21ABVA
OPERATOR ADAPTER A21ABVA Installation Instructions for Allen-Bradley Bulletin 1494V (variable depth), 1494C, 140G and 140U Cable Controlled For floor-mounted enclosures with disconnect on the right flange
More informationOFS ED-6C Instruction Sheet LIGHTGUIDE CROSS-CONNECT Comcode: LGX DISTRIBUTING FRAME INSTALLATION
OFS ED-6C321-50 636-299-104-01 Instruction Sheet LIGHTGUIDE CROSS-CONNECT Comcode: 845 866 367 LGX DISTRIBUTING FRAME INSTALLATION This instruction sheet is intended for use with the installation of an
More informationQwik-Fence Installation Instructions
Qwik-Fence Installation Instructions 1 Tools Required The following installation instructions should be used as a guide for installing Folding Guard Qwik-Fence Partitions. Good common sense and appropriate
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationSPECIFICATION SHEETS. FRAMELESS GLASS pool fencing
SPECIFICATION SHEETS FRAMELESS GLASS pool fencing 8-10mm 12mm STANDARDS & NATA TESTING 1254mm 1200mm * GLASS POOL FENCING MAXIMUM SPAN 2000MM 12MM TOUGHENED SAFETY GLASS 1200MM HIGH FULLY AS/NZ-2208 CERTIFIED
More informationMidwest Roadside Safety Facility
2 Spaces @ 75" [05]= 150" 3810 4 Spaces @ 3 Spaces @ 4 Spaces @ 18.75" 37.5" [953]= 37.5" [953]= [476] 112 1/2" 150" = 75" 2857 3810 [05] 18 476 7 Spaces @ 75" [05]=525" [13335] 21 20 18 17 1615 14 1312
More informationBIKE FILE (301)
B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing
More informationB O S L E Y W A S H DETENTION BASIN
B O S L E Y W A S H DETENTION BASIN MESA COUNTY WATE DIVISION 5 WATE DISTICT 72 DAM I.D. NUMBE 720425 LIST OF DAWINGS IS CONTAINED ON SHEET 2. MANDATOY PE-BID CONFEENCE I HEEBY DECLAE THAT THESE PLANS
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL 6115 POTATO PEELER ML-137600 ML-137601 PRIOR MLS COVERED IN THIS CATALOG ML-19869 ML-19683 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43064 Rev.
More informationM-1 CORE RIG PARTS LIST. July 6, Part #
M- CORE RIG PARTS LIST July, 0 Part # 800 Table of Contents Pictorial Page Index Angle Complete Combination Stand without Motor... Pictorial Page Index Standard Complete Anchor Stand without Motor...
More informationRUN-IN SHED INSTRUCTIONS
RUN-IN SHED INSTRUCTIONS 14321 5th Line Nassagaweya, Rockwood, ON, N0B 2K0 Phone 519-856-9959 ~ Fax 519-856-4141 Toll Free 1-800-461-3362 ~ Email sales@systemhorse.com Website www.systemfence.com RUN-IN
More informationADAPT. ABILITY. X 6.50" Example of a continuous row. Shown: hanging the fixture via threaded rods.
AMELUX Suspension Points 6.50" GUV4-HE-FLANGE; GUV6-HE-FLANGE Gyp Board Ceiling INSTALLATION INSTUCTIONS SHEET #: 689-0498 SHEET 1 of 9 (SHEETS 1-4) T5/T5HO (SHEET 5) T5/T5HO LUXOTTICA (SHEETS 6-9) LED
More information2x Bottom Bracket. 1x Rail Support STEP 1 STEP 2
Level Railing Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster Connectors installed)
More information2-PIECE STAIRWAY ASSEMBLY
REVISED 2/12/15 2-PIECE STAIRWAY ASSEMBLY STEP 1: LAY OUT THE RIGHT AND LEFT SIDE TOP AND BOTTOM RISER PANELS AS SHOWN IN FIGURE 1. BOLT THE SPLICE PLATE (#15114C for OSHA F SERIES; #15412C for BOCA U
More informationInstruction Guide 4A90L
Instruction Guide 4A90L Kargo Master Rancho Cordova, CA 95742 800-343-7486 CustomerService@KargoMaster.com DATE: *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS
More informationM-5 PRO CORE BORE PARTS LIST DRILLING MACHINE. (March 2017) Part #
M- PRO CORE BORE DRILLING MACHINE PARTS LIST (March 07) Part #809 Table of Contents Description Page No. Carriage Assembly....... - Combo Base Assembly....... - 7 Anchor Base Assembly........8 Anchor
More informationHopper and Drive Components
Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com September 1, 2015 Lit. No. 43772, Rev. 00 Hopper and Drive Components PRO-FLO 525 Low-Profile Tailgate Spreader Parts List
More informationAMERICAN NATIONAL STANDARD
ENGINEERING COMMITTEE Inteface Pactices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 48-1 2015 Test Method fo Measuing Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell NOTICE
More informationHopper and Drive Components
February, 07 Lit. No. 770, Rev. 0 Hopper and Drive Components Model TS-00- & TS-00-EG- Low-Profile Tailgate Spreader Parts List This manual is for TurfEx TS-00- & TS-00-EG- tailgate spreaders with serial
More informationRIPPER PEDAL. Bearing / Axle Replacement. ( Disassembly )
RIPPER PEDAL Bearing / Axle Replacement ( Disassembly ) 1 1. Use good quality tools to avoid stripping screw sockets. 2. When servicing your pedals, work on one side at a time to prevent parts from mixing
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152 September 1, 2015 Lit. No. 43774, Rev. 00 Hopper and Drive Components SPEED-CASTER 525 Low-Profile Tailgate Spreader
More informationFigure Geometry for Computing the Antenna Parameters.
Spheical Coodinate Systems Definitions Figue 1.2.1 Geomety fo Computing the Antenna Paametes. Antenna Radiation Patten: The distibution of adiated enegy fom an antenna ove a suface of constant adius centeed
More informationSection E SWEEP WAGON
Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for
More informationInstallation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
More informationProject 8.1a Model A Button Maker
Page 1 of 16 Project 8.1a Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part is also important. You
More informationMatched Monolithic Quad Transistor MAT14
Matched Monolithic Quad Transistor MAT4 FEATUES Low offset voltage: 400 µv maximum High current gain: 300 minimum Excellent current gain match: 4% maximum Low voltage noise density at 00 Hz, ma 3 nv/ Hz
More informationInstallation Instructions 1200/1255/G Handrails International Compliant
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationPLEASE CHECK ALL BOXES FOR HARDWARE BEFORE DISCARDING
Thank you for purchasing the SleepSafe Safety Bed. With proper care, your bed will provide years of safe use. Carefully unpack all the contents of your bed and verify that all parts are included using
More informationNote: This assembly instruction will cover all configurations of Alloy adjustable height single bases.
Note: This assembly instruction will cover all configurations of adjustable height single bases. 1 With the leg upside down. Attach the freestanding foot to the bottom of the adjustable height leg using
More informationMulti-Stage ASSEMBLY INSTRUCTIONS ST-8100 SERIES. 125 TAYLOR PARKWAY ARCHBOLD, OH PHONE: (419) FAX: (419)
125 TAYLOR PARKWAY ARCHBOLD, OH 43502 PHONE: (419) 445-8915 FAX: (419) 445-0367 www.biljax.com Multi-Stage ST-8100 SERIES ASSEMBLY INSTRUCTIONS ALL DRAWINGS ARE FOR ILLUSTRATION ONLY. PRINTED IN U.S.A.
More informationM2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationFooter & Base Plate Assembly. installation guide. ILINE power/data beam
Phase Footer & Base Plate Assembly installation guide ILINE power/data beam Phase Materials and Tools. ILINE Postsleeve Components Top Cap Data Face Plate Post Sleeve Post Sleeves shipped with orders after
More informationMETER - INSTALLATION Pad Mount Transformer
ER 1-210-C PAGE 1 OF 5 USE: Pad mount transformer secondary compartment LATEST REVISION: PREVIOUS REVISION 10-01-12 ORIGINATED 0-94 PREVIOUS NUMBER ER 700, 10-01-86 Added specification for placement and
More informationADDICTIVE DESERT DESIGNS
Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing
More informationThe Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
More informationSOUND ANCHOR ASSEMBLY INSTRUCTIONS FOR MOTORIZED STUDIO MONITOR STAND WITH FIXED START HEIGHT
SOUND ANCHOR ASSEMBLY INSTRUCTIONS FOR MOTORIZED STUDIO MONITOR STAND WITH FIXED START HEIGHT Thank you for purchasing Sound Anchor Motorized Monitor Stands. These stands were specifically developed with
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationTriple Crown Advantage:
Aeoquip Tiple Cown Advantage Hose Poducts GH120 GH663 GH781 GH793 GH493 FC254 Tiple Cown Advantage: Highe Pessues Impoved Tempeatues Impoved Abasion Resistance Raise You Standads with Eaton s Aeoquip MatchMate
More informationScienceDirect. Simplified Generation of Electromagnetic Field within EMC Immunity Test Area
Available online at www.sciencediect.com ScienceDiect Pocedia Engineeing 69 ( 014 ) 7 34 4th DAAAM Intenational Symposium on Intelligent Manufactuing and Automation, 013 Simplified Geneation of Electomagnetic
More informationInstallation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
More informationSECTION 7. SAFETYING
9/8/98 AC 43.13-1B SECTION 7. SAFETYING 7-122. GENERAL. The word safetying is a term universally used in the aircraft industry. Briefly, safetying is defined as: Securing by various means any nut, bolt,
More informationADDICTIVE DESERT DESIGNS
Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing
More informationParts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationFranklin Mills Stackable Movable Lateral Instructions
Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationCAT-350 Product Manual
CAT-350 Product Manual Release 01/17 www.ingalcivil.co.nz CAT-350 NZ Assembly Manual Ingal Civil Products NZ 40 Tironui Road, Auckland 2112 www.ingalcivil.co.nz Important: These instructions are for standard
More informationTire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
More informationLT V Low Cost High Side Current Sense in a SOT-23 FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION
LT616 36V Low Cost High Side Current Sense in a SOT-23 FEATUES Gain Confi gurable with Two esistors Low Offset Voltage: 25μV Maximum Output Current: 1mA Maximum Supply ange: 2.7V to 36V, 44V Absolute Maximum
More informationIntercooler Shroud and Belt Cover for WRX
Intercooler Shroud and Belt Cover for 2015+ WRX 2016-05-18 Thank you for purchasing this PERRIN product for your car! Installation of this product should only be performed by persons experienced with installation
More informationTYPE J (20 FT - 40 FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" NOTE: sheet 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection Chord splice (see details (See details sheets 3 & 4 of 10) s Top truss chord Free end panel 10-0" Support end panels length varies (See chart below) \ Truss Back truss chord Top
More informationMounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
More informationINSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011
INSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011 Specifications: Installs to K-Series desk or wall mount. Accommodates K-Series mounting arms (fixed
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
More informationMobile TV Cart Instruction Manual SKU: STAND-TV03E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv03e
More information96000 Hopper and Drive Components
Western Products, PO Box 245038, Milwaukee, WI 524-9538 www.westernplows.com November 1, 2011 Lit. No. 95843, Rev. 07 96000 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationMighty Mo GX Series Cabinet Installation Guide. OR Rev /11
Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
More informationDEPTH-KIT-785 Seat Depth Extension
Parts Required: 2 x Seat Frame Plugs 1.5 or 3 1 x Elevation Rod 18.5 or 20 2 x Attachment Rods 18.5 or 20 3 x Vinyl Straps color and width specific Tools Used: Sissors 2 x ½ Wrench Soft Tip Hammer or Mallet
More informationM-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #
M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,
More informationDIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1300-XL March 2007 Part#: 1800666 Intentionally Blank Table of Contents Description Page No. Frame Group....4-7 Engine Group 9 Horsepower Gas. 8
More informationHANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSAN-INT INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
More informationWARNING. BX Ford F350 (Includes Super Duty) Installation Instructions
Serial Number BX231 Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Serial Number Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationBASEBALL FOUL POLES GROUND SLEEVE MOUNTED
X X Page 1 of 6 GROUND SLEEVE INSTALLATION Ground Sleeve Foul Pole Size "A" F39901 32' and 40' 67 5/8" F39902 24' 67 5/8" F39903 16' 43 5/8" 00402000 12' 29 3/8" 7" ONE SET OF SLOTS MUST BE PARALLEL AND
More informationSuper Shot Adjustable Basketball System
Model: GP5A48 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION
More informationHigh Frequency 50 GHz Thin Film Chip Resistor
High Frequency 50 GHz Thin Film Chip esistor DESIGN SUPPOT TOOLS Models Available click logo to get started Those miniaturized components are designed in such a way that their internal reactance is very
More information(50 FT FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" 8-0" 6-0" Truss Depth. 3" sheets 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection (See details sheets 3 & 4 of 10) \ Span (Odd number of panels) \ Span (Even number of panels) Back truss chord Top truss chord \ Truss Chord splice Truss depth (See details \ Left
More informationLevel Railing. Installation Guide. v2.5 W W W. S O L U T I O N S A L U M I N U M. C O M
Level Railing Installation Guide Top Rail Bottom Rail Aluminum Baluster 2x Bottom Bracket 1x Rail Support #909915 Kit Includes: 1 - Top Rail (with Baluster Connectors installed) 1 - Bottom Rail (with Baluster
More information