Lecture #11. Assembly modeling and assembling parts RES 112E COMPUTER AIDED TECHNICAL DRAWING ITU
|
|
|
- Myra Walker
- 5 years ago
- Views:
Transcription
1 Lecture #11 Assembly modeling and assembling parts
2 This week You will learn how to assemble the parts. The steps to follow are: oassembly drawing oassembly section obill of materials oexploded assembly oanimation oassignment # 10
3 Assembly section view These are typically orthographic or pictorial section views of parts as puttogether in an assembly. Adjacent parts in assembly drawings are cross-hatched at different angles to make the separate parts clean. Usually standard parts such as fasteners, washers, springs, bearings, and gears are not crosshatched.
4 Assembly section view
5 Make Drawing from Assembly
6 Make Drawing from Assembly
7 Make Drawing from Assembly The separate parts comprising the assembly are located in the drawing by leaders radrating from the circles and are usually listed in a parts list.
8 Bill of materials When all parts in an assembly drawing have to be identified, each single part is usually labelled by means of a reference number. (a) the part number, (b) the name or description of the part, (c) the material from which the part is to be made, (d) the quantity required.
9 Bill of materials in Assembly
10 Bill of materials in Drawing
11
12 Exploded Assembly To make the assembly drawing legible, the assembly can beexploded to separatecomponents. Once you have assembled your system, you can create an exploded configuration that will essentially be an assembly drawing for the system
13 Exploded Assembly
14 Exploded Assembly
15 Exploded Assembly
16 Animation Some software packages allow you to animate your system by displayingslightlydifferent configurations in rapid succession. Motion Studies are graphical simulation of motion for an assembly. Access Motion Manager from Motion Study tab.
17 Motion Manager It displays a timeline-based interface and provides the following Annimation : Apply animation to animate the motion of an assembly. Add a motor and insert positions of assembly components at various times using set ket point.
18 Basic Motion SOLIDWORKS 2014
19 Assembly Basic Motion Click the Motion Study 1 tab located in the bottom left corner of the Graphics window. The MotionManager is displayed. Select Basic Motion for Type of study from the MotionManager drop-down menu Click Motor from the MotionManager. The Motor PropertyManager is displayed.
20 Assembly Basic Motion Click the Rotary Motor box. Click the FLATBAR front face. A red Rotary Motor icon is displayed. The red direction arrow points counterclockwise.
21 Assembly Basic Motion Enter 150 RPM for speed in the Motion box. Click OK from the Motor PropertyManager. Click Calculate. The FLATBAR rotates in a counterclockwise direction for a set period of time. Click Play. View the simulation.
22 Assembly Basic Motion Save the simulation in an AVI file. Click Save Animation. Click Save from the Save Animation to File dialog box. View your options. Click OK from the Video Compression box.
23 For more details
24 Next week... No more class... MAKE UP EXAM For your final exams Good luck
25 Next week... Design project presentation so... There will be take-home assignment Do not forget to prepare your presentation & poster
26 Before coming... FINAL REPORT SUBMISSON Title page Table of Contents, List of Figures List of Tables Executive summary Body (text of the report) Drawings References Appendices POSTER PREPERATION Paper size (H = 625 mm by W = 450 mm) Title: 100 point Main headings: 36 to 48 point 40 % graphics, 40 % white space, 20 % text ORAL PREPERATION PowerPoint presentation No more than 30 minute Max. 30 slides
27 Before coming... Download this file from web page sdersleri/res112e/desingproject
28 Before coming... Type your team name
29 Before coming... Change with your design problem
30 Before coming... Ahmet Mehmet Hale Lale Type team members names
31 Before coming Give contribution
32 Before coming... 20x4=80 15x4=60 25x4=100 40x4=160
33 Before coming... EACH TEAM (Team Leader) Before coming project presentation þ Fill in the blanks þ Make 7 copies for each team leader
34 During presentation EACH TEAM (Team Leader) During project presentation þ Listen and follow team presentations þ Give Grades for 15 evaluation
35 During presentation
36 Next week... Design project presentation so... There will be take-home assignment Do not forget to prepare your presentation & poster
37 Assignment #10 Page Figure You will build the assembly model Submit the assignment on time Upload file into NINOVA
Working With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
PowerPoint 2016: Formatting Pictures. Introduction
PowerPoint 2016: Formatting Pictures Introduction There are a variety of ways to format the pictures in your slide show. The picture tools in PowerPoint make it easy to personalize and modify the images
SolidWorks 2005 Tutorial. and MultiMedia CD. A Step-by-step Project Based Approach Utilizing 3D Solid Modeling
INSIDE: MultiMedia CD An audio/visual presentation of the tutorial projects SolidWorks 2005 Tutorial and MultiMedia CD A Step-by-step Project Based Approach Utilizing 3D Solid Modeling David C. Planchard
Introduction to Parametric Modeling AEROPLANE. Design & Communication Graphics 1
AEROPLANE Design & Communication Graphics 1 Object Analysis sheet Design & Communication Graphics 2 Aeroplane Assembly The part files for this assembly are saved in the folder titled Aeroplane. Open an
Assembly Receiver/Hitch/Ball/Pin to use for CAD LAB 5A and 5B:
MECH 130 CAD LAB 5 SPRING 2017 due Friday, April 21, 2016 at 4:30 PM All of LAB 5 s hardcopies will be working drawing layouts. Do not print out from the part file. We will be using the ME130DRAW drawing
AEROPLANE. Create a New Folder in your chosen location called Aeroplane. The four parts that make up the project will be saved here.
AEROPLANE Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson. Sketching (Line, Rectangle, Arc, Add Relations, Dimensioning), Extrude, Assemblies and
In this tutorial you will use Photo Story 3, a free software program from Microsoft, to create digital stories using text, graphics and music.
In this tutorial you will use Photo Story 3, a free software program from Microsoft, to create digital stories using text, graphics and music. What you will learn: o System Requirements and Recommendations
8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
Anchor Block Draft Tutorial
Anchor Block Draft Tutorial In the following tutorial you will create a drawing of the anchor block shown. The tutorial covers such topics as creating: Orthographic views Section views Auxiliary views
[DOING AN ODA: STEP-BY-STEP INSTRUCTIONS]
![[DOING AN ODA: STEP-BY-STEP INSTRUCTIONS]](/thumbs/91/106831845.jpg "[DOING AN ODA: STEP-BY-STEP INSTRUCTIONS]")
How to do Oral Diagnostic Assessments (ODAs) Table of Contents What is an ODA?... 1 Check the Headset Volume... 2 Check the Headset Microphone Using Audacity... 3 Log into Coursework... 4 Select Your Microphone,
Lab 3 Introduction to SolidWorks I Silas Bernardoni 10/9/2008
1 Introduction This lab is designed to provide you with basic skills when using the 3D modeling program SolidWorks. You will learn how to build parts, assemblies and drawings. You will be given a physical
Creating Digital Stories for the Classroom
Using Photo Story 3 to Create a Digital Story Creating Digital Stories for the Classroom When you open Photo Story 3 you have a few options. To begin a new story select the option Begin a New Story and
Exploded View Extracting Drawings. ENGR 1182 SolidWorks 08
Exploded View Extracting Drawings ENGR 1182 SolidWorks 08 Today s Objectives Formal Drawing Components: Exploded View Extracted Drawings SW07 Activity SW07 Application Formal Drawings Definition: First
Faculty Lecture Capture Guide
Faculty Lecture Capture Guide If you have never used Panopto before, follow this first part. Log into your Blackboard Account and open the course you wish to capture: Open your Course Management Control
Lesson 6: Drawing Basics
6 Lesson 6: Drawing Basics Goals of This Lesson Understand basic drawing concepts. Create detailed drawings of parts and assemblies:. Before Beginning This Lesson Create Tutor1 and Tutor2 parts and the
Inserting Images Into Documents
Inserting Images Into Documents Chapter 11 Microsoft Word has its own library of graphics, called Clip Art, which can be inserted into documents when required. You can also insert graphics created in other
Quick Start for Autodesk Inventor
Quick Start for Autodesk Inventor Autodesk Inventor Professional is a 3D mechanical design tool with powerful solid modeling capabilities and an intuitive interface. In this lesson, you use a typical workflow
2. Now you need to create permissions for all of your reviewers. You need to be in the Administration Tab to do so. Your screen should look like this:
How to set up AppReview 1. Log in to AppReview at https://ar.applyyourself.com a. Use 951 as the school code, your 6+2 as your username, and the password you created. 2. Now you need to create permissions
2
1 2 3 4 5 6 7 of 14 7/11/17, 8:46 AM 7 8 9 10 11 12 13 Apply an animation 1. Select the object or text on the slide that you want to animate. An "object" in this context is any thing on a slide, such as
To start a new drawing Select File New then from the dialog box, which appears select Normal.dft followed by OK.
Draft Tutorial This tutorial provides step-by-step instructions for the detailing of a drawing of the anchor block shown opposite. As you create this drawing, you will use the following drafting techniques:
COURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
Student + Instructor:
DRAFT OF DEMO FOR The following set of instructions are an optional replacement for the Section Views in SolidWorks. This demo should help prepare the students for the Out of Class HW Student + Instructor:
Assembly Drawings. Definition; Description
Assembly Drawings Definition; Description Assembly drawings show how individual parts fit together to make a machine. An assembly drawing is a drawing of an entire machine or system with all of its components
Davis Art Images: Create and Share Slideshows
Davis Art Images: Create and Share Slideshows Davis Art Images, you can create and curate custom sets of images to use in your art room with Tags. Your Tagged Image Sets can then be viewed and presented
Assignment 13 CAD Mechanical Part 2
Assignment 13 CAD Mechanical Part 2 Objectives In this assignment you will learn to apply the hatch and break commands along with commands previously learned. General Instructions Hatching 1. When AutoCAD's
ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems
Spring Semester 2016 ENGR 1182 Exam 1 First Mid Term Exam Study Guide and Practice Problems Disclaimer Problems in this study guide resemble problems relating mainly to the pertinent homework assignments.
AUTODESK INVENTOR Trial Projects
AUTODESK INVENTOR Trial Projects Drawing Creation Create detailed drawings of a collar flange PART 1: CREATING DRAWING VIEWS page: 2 1. 2. 3. Start by clicking the Projects icon in the ribbon. Navigate
Introducing Photo Story 3
Introducing Photo Story 3 SAVE YOUR WORK OFTEN!!! Page: 2 of 22 Table of Contents 0. Prefix...4 I. Starting Photo Story 3...5 II. Welcome Screen...5 III. Import and Arrange...6 IV. Editing...8 V. Add a
Certified SOLIDWORKS Professional Advanced Preparation Materials
Includes Preparation for Five Advanced Certification Exams Certified SOLIDWORKS Professional Advanced Preparation Materials Sheet Metal, Weldments, Surfacing, Mold Tools and Drawing Tools SOLIDWORKS 2016
SolidWorks Reference Geometry
SolidWorks Reference Geometry IDeATe Laser Micro Part 2 Dave Touretzky and Susan Finger 1. Symmetry and Reference Geometry Today, you ll make this part bear-like face and then cut it on the laser cutter:
Full Section Tutorial Creating a Part
Full Section Tutorial Creating a Part 1. Create a block with the following measures a. Length=4.00 b. Depth=4.00 c. Height= 2.00 2. Place a Counterbore hole on the top view at the center of the block with
Chapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
CHATS Meals On Wheels Online Ordering User Guide
CHATS Meals On Wheels Online Ordering User Guide We want to make ordering Meals on Wheels easier for you so we have added an online ordering option from MobiDines! You can now order from your computer,
SolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
TECHNOTravel. For Microsoft Word & PowerPoint 2010 Student Workbook. TECHNOeBooks Project-based Computer Curriculum ebooks.
TECHNOTravel For Microsoft Word & PowerPoint 2010 Student Workbook TECHNOeBooks Project-based Computer Curriculum ebooks www.bepublishing.com Copyright 1993 2010. TechnoKids Inc. in partnership with B.E.
Table of Contents. Creating Your First Project 4. Enhancing Your Slides 8. Adding Interactivity 12. Recording a Software Simulation 19
Table of Contents Creating Your First Project 4 Enhancing Your Slides 8 Adding Interactivity 12 Recording a Software Simulation 19 Inserting a Quiz 24 Publishing Your Course 32 More Great Features to Learn
Ball Valve Assembly. On completion of the assembly, we will create the exploded view as shown on the right.
Ball Valve Assembly Supplied are the main components of a ball valve. In this exercise you will assemble the valve as shown below Left. (N.B. Socket head cap screws are not supplied these will be created
Chapter 5 Sectional Views
Chapter 5 Sectional Views There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved
New Perspectives on PowerPoint Module 1: Creating a Presentation
New Perspectives on PowerPoint 2016 Module 1: Creating a Presentation Objectives, Part 1 Plan and create a new presentation Create a title slide and slides with lists Edit and format text Move and copy
Drawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
Section 4 Digital Imagery/ Photo
Section 4 Digital Imagery/ Photo Library of Congress Teaching with Primary Sources at Governors State University Section 4 1 ALPHABET SOUP AND GRAPHICS Working with photographs, maps, and other images
User Guide V10 SP1 Addendum
Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or
MS Word Training Formatting Pictures
Introduction MS Word Training Formatting Pictures There are many ways to format pictures in Word. For instance, you can change the size or shape of an image to better suit your document. You can also enhance
Exploded View Extracting Drawings. ENGR 1182 SolidWorks 08
Exploded View Extracting Drawings ENGR 1182 SolidWorks 08 Today s Objectives Formal Drawing Components: Exploded View Extracted Drawings SW07 In-Class Activity SW07 Out-of-Class Homework Assignment Formal
Getting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
Introduction. Basic Image Formatting. PowerPoint 2010 Formatting Pictures. To Crop an Image: Page 1
PowerPoint 2010 Formatting Pictures Introduction Page 1 Once you've added pictures to your presentations, you can format them in various ways. The picture tools in PowerPoint 2010 make it easy to incorporate
g. Click once on the left vertical line of the rectangle.
This drawing will require you to a model of a truck as a Solidworks Part. Please be sure to read the directions carefully before constructing the truck in Solidworks. Before submitting you will be required
CAD and Drafting Standards Working Drawings
CAD and Drafting Standards Working Drawings Gregory Mocko Introduction 2 The purpose of drawing or generating a CAD document is to communicate Essentially, since communication is the goal, some standards
Table of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
Kaltura CaptureSpace Lite Desktop Recorder: Editing, Saving, and Uploading a Recording
Kaltura CaptureSpace Lite Desktop Recorder: Editing, Saving, and Uploading a Recording For this handout, we will be editing the Screen Recording we created in the Kaltura CaptureSpace Lite Desktop Recorder
Create all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
CAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
Chapter 12 Assembly Drawings Topics Exercises
Chapter 12 Assembly Drawings Topics Exercises Assembly : Topics Summary 12.1) Definitions 12.2) Views Used in Assembly Drawings 12.3) Things to Include/Not Include 12.4) Standard Parts - Specifications
Page 21 GRAPHING OBJECTIVES:
Page 21 GRAPHING OBJECTIVES: 1. To learn how to present data in graphical form manually (paper-and-pencil) and using computer software. 2. To learn how to interpret graphical data by, a. determining the
SOLIDWORKS 2018 Basic Tools
SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Fundamentals of Drafting - Orthographic Projection with Hidden Details
Fundamentals of Drafting - Orthographic Projection with Hidden Details Objectives: 1. To extend the principle of orthographic projection for hidden details. 2. To illustrate the representation of hidden
Eduphoria Guide To Create a Test
Eduphoria Guide To Create a Test 1. Begin by logging into Eduphoria. If you do not have the link bookmarked, you can go to www.sapiacademies.org and click on the login link for Eduphoria on the top menu
XI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
Introduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
Ansoft Designer Tutorial ECE 584 October, 2004
Ansoft Designer Tutorial ECE 584 October, 2004 This tutorial will serve as an introduction to the Ansoft Designer Microwave CAD package by stepping through a simple design problem. Please note that there
Jing PDF Tutorial Template
Jing PDF Tutorial Template Developer Name: Microsoft App Utilized: Video URL from Camtasia: https://www.youtube.com/watch?v=kcp7hg8vbvs&feature=youtu.be Table of Contents New Slide pg. 2-3 Action Button
Lesson 10: Loft Features
10 Goals of This Lesson Your students will be able to create the following part: profiles chisel This lesson plan corresponds to the Loft Features chapter of SolidWorks Getting Started. SolidWorks Student
Evaluation Chapter by CADArtifex
The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching
Student + Instructor:
BLUE boxed notes are intended as aids to the lecturer RED boxed notes are comments that the lecturer could make Show 01 Solid Modeling Intro slides quickly. SolidWorks Layout slides are on EEIC for reference
When you complete this assignment you will:
Objjectiives When you complete this assignment you will: 1. create an engineering drawing file using the management file menu. 2. dimension the engineering file using the drawing annotation menu. 3. produce
My Blogs: To Add New Blog Post: o Click on the My Learn360 link. You will then see eight different tabs (below).
My Blogs: Every user on Learn360 is given one blog. A blog can be shared throughout Learn360 and there is no limit to the number of blog posts. Blogs are a great way for teachers to interact with students
Upcoming Events This Week : LPQ
Upcoming Events This Week : LPQ Extracting Drawings - DEMO Although most demos are implemented with word documents, this demo employs slides so that more details can be shown to the students as the drawing
Creating a Frame by Frame Animation for PhotoStory
Creating a Frame by Frame Animation for PhotoStory There are an unlimited number of animation styles that you can create using the PhotoShop Elements software. Depending on the type of animation you want,
SolidWorks 103: Barge Design Challenge
SolidWorks 103: Barge Design Challenge Note: This tutorial was created using SolidWorks 2009. If you are using another version of SolidWorks, you may notice some variation in display states and configuration.
Photo One Digital Photo Shoots and Edits
Photo One Digital Photo Shoots and Edits You will submit photo shoots, unedited and you will submit selected edited images. The shoots will be explained first and the edits will be explained later on this
Online Check-in Information for 2018 Sunnyvale Alliance Medina Fall Classic
Online Check-in Information for 2018 Sunnyvale Alliance Medina Fall Classic **Please note that all rosters must be updated by Noon the Thursday before the tournament. Only players that are on your gotsoccer
Assemble This! [Part 1]
![Assemble This! [Part 1]](/thumbs/74/69963588.jpg "Assemble This! [Part 1]")
11/30/2006-3:00 pm - 4:30 pm Room:Marcello - 4401 (MSD Campus) Assemble This! [Part 1] Alan Kalameja - Trident Technical College and Kevin Robinson (Assistant); Patrik Chartrand (Assistant) MA34-1L This
Activity 1.5.5a Pegboard Toy Working Drawings
Activity 1.5.5a Pegboard Toy Working Drawings Introduction Having the ability to take something that you have designed and create a 3D model of it is exciting and fun to do. In the last activity, you made
Entering Checkpoint Data
Entering Checkpoint Data How do I change which Checkpoint Period I m viewing? To change the period from one to another, here are the steps: On the right side of the screen, click the grey drop-down "Change
Using the Desktop Recorder
Mediasite Using the Desktop Recorder Instructional Media publication: 09-Students 9/8/06 Introduction The new Desktop Recorder from Mediasite allows HCC users to record content on their computer desktop
Custom Pillow Block Design Protrusion, Cut, Round, Draft (Review) Drawing (Review) Inheritance Feature (New) Creo 2.0
Custom Pillow Block Design Protrusion, Cut, Round, Draft (Review) Drawing (Review) Inheritance Feature (New) Creo 2.0 Rotatable pdf files: Casting Machining Grease Fitting Boss The general design of the
Creating and Printing Large Format Posters Using PowerPoint 2016
Creating and Printing Large Format Posters Using PowerPoint 2016 Creating a Large Format Custom-sized PowerPoint Slide The easiest way is to create a large format poster is by making a single custom-sized
SDC. SolidWorks Tutorial 2001Plus. A Competency Project Based Approach Utilizing 3D Solid Modeling. David C. Planchard & Marie P.
2001Plus A Competency Project Based Approach Utilizing 3D Solid Modeling David C. Planchard & Marie P. Planchard SDC PUBLICATIONS www.schroff.com www.schroff-europe.com Project 2 Below are the desired
Toothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
Tutorial 1 getting started with the CNCSimulator Pro
CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro
SOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
Assembly Guide for Printrbot - Simple Maker s Edition 1405
Assembly Guide for Printrbot - Simple Maker s Edition 1405 Last update: March 2016 Please Note: be careful on the steps that are underlined 1 Contents Tools Needed:... 3 First step: Check components and
Solidworks tutorial. drawing. A u t h o r : M. G h a s e m i. C o n t a c t u s : i n f s o l i d w o r k s a d v i s o r.
Solidworks tutorial drawing A u t h o r : M. G h a s e m i C o n t a c t u s : i n f o @ s o l i d w o r k s a d v i s o r. c o m The manufacturing techniques had a vast development during the past decades.
Up to Cruising Speed with Autodesk Inventor (Part 1)
11/29/2005-8:00 am - 11:30 am Room:Swan 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Up to Cruising Speed with Autodesk Inventor (Part 1) Neil Munro - C-Cubed Technologies Ltd. and
Autodesk Inventor Drawing Manager Tips & Tricks
Alessandro Gasso Autodesk, Inc. MA1280 This class covers several workflows that answer the most common questions from the Inventor users about the Drawing Manager. You will learn how to add the scale value
Reviewing Your Tax Return In Your Portal
Reviewing Your Tax Return In Your Portal 1. Go to our website www.franklinincpa.com and click on the link at the bottom left of the screen for Client Connect. a. This link will take you to the login screen
Curriculum Department Bristol City Schools Bristol, TN
Curriculum Department Bristol City Schools Bristol, TN Microsoft Photo Story 3 1 4/4/2013 Table of Contents GETTING STARTED 3 CREATE A NEW STORY 3 IMPORT AND ARRANGE YOUR PICTURES 3 EFFECTS 5 ADD A TITLE
Release Highlights for BluePrint-PCB Product Version 1.8
Release Highlights for BluePrint-PCB Product Version 1.8 Introduction BluePrint Version 1.8 Build 341 is a rolling release update. BluePrint rolling releases allow us to be extremely responsive to customer
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY
DEPARTMENT OF MECHANICAL AND INDUSTRIAL ENGINEERING NORTHEASTERN UNIVERSITY CAPSULE PROGRAM Funded by NSF grant #0833636 Tutorial 02 3D Part Modeling SolidWorks 2010 Copyright 2010 Prof. Zeid 3D Part Modeling
CS Problem Solving and Structured Programming Lab 1 - Introduction to Programming in Alice designed by Barb Lerner Due: February 9/10
CS 101 - Problem Solving and Structured Programming Lab 1 - Introduction to Programming in lice designed by Barb Lerner Due: February 9/10 Getting Started with lice lice is installed on the computers in
FREE BODY DIAGRAMS WITH ANIMATED GIF FILES
FREE BODY DIAGRAMS WITH ANIMATED GIF FILES Shih-Liang Wang Mechanical Engineering Department North Carolina A&T State University Abstract A free body diagram (FBD) is a graphic representation in which
GRAPHOGAME User Guide:
GRAPHOGAME User Guide: 1. User registration 2. Downloading the game using Internet Explorer browser or similar 3. Adding players and access rights to the games 3.1. adding a new player using the Graphogame
Engineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
Turtles and Geometry
Turtles and Geometry In this project, you explore geometric shapes with the help of the turtle. Remember: if you must leave your activity before the, remember to save your project. Step 1: Drawing with
Using LTSPICE to Analyze Circuits
Using LTSPICE to Analyze Circuits Overview: LTSPICE is circuit simulation software that automatically constructs circuit equations using circuit element models (built in or downloadable). In its modern
COPYRIGHTED MATERIAL CREATE A BUTTON SYMBOL
CREATE A BUTTON SYMBOL A button can be any object or drawing, such as a simple geometric shape.you can draw a new object with the Flash drawing tools, or you can use an imported graphic as a button.a button
Generative Drafting (ISO)
CATIA Training Foils Generative Drafting (ISO) Version 5 Release 8 January 2002 EDU-CAT-E-GDRI-FF-V5R8 1 Table of Contents (1/2) 1. Introduction to Generative Drafting Generative Drafting Workbench Presentation
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image
How to create a cove for cove lighting in DIALux In this tutorial you will learn how to make a cove similar to the one in the following image The cove dimension will be 4 meter by 5 meter and the other
SOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
Creating DXF Files For The Waterjet
Creating DXF Files For The Waterjet 2D CAD Files For Your Gear Pumps By Martin L. Culpepper CONTENTS: I. Introduction...... 2 II. Software For Creating DXF Files....... 2 III. What Is Required.... 2 IV.