Sign Construction and Implementation Principles

Transcription

1 Sign Construction and Implementation Principles Revision 3.1 Curtin University Cover page 001

2 S 2.1 Primary identification Page S 4.1 Tertiary identification Page Wall Mounted Super-numerals Wall Mounted Panel S 2.2a Primary identification Page 006 S 4.2 Secondary numbering Page Vinyl Super-text S 2.2b Primary identification Page S 7.1 Tertiary identification Page 019 Wall Mounted Super-text To Glazing S 3.1 Secondary identification Page S 7.1a Tertiary identification Page 020 Bulkhead wrap-around panel To Glazing S 3.2 Secondary identification Page S 7.2 Tertiary identification Page Bulkhead front face mounted panel Wall-mounted panel Curtin University Sign Type Index 002

3 S 7.2a Tertiary identification Page T11 Road side banner Page Wall mounted panel S 8.1 Vertical rigid banner Wall mounted banner Page S 8.2 Horizontal rigid banner Wall mounted banner Page 028 T6 Information totem Page T9 Wayfinding totem Page 032 Curtin University Sign Type Index 003

4 S Super Graphic / Building Numbers Examples are shown of possible applications. Dimensions will be dependent on individual location and must be determined onsite. Minimum 3mm thick aluminium, individual elements for letters 1000mm high. Increasing the height will require increasing thickness of aluminium. Concealed studs placement should be evaluated for each application. Contractor may be required to provide shop drawings of fixing methods if not supplied by Curtin University. Curtin University S 2.1 Primary identification 004

5 S Elevation West S Enlargement 8 mm aluminium letterforms profile cut, painted white NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. S 2.1 [Building No] location. Supergraphic numerals Refer enlargement S Elevation Photo montage Curtin University S 2.1 Primary identification 005

6 S 2.2a 01 Elevation West S 2.2a Supertext Refer enlargement NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. Premium grade cast vinyl black to be applied directly to cladding panel S 2.2a 03 Front Elevation enlargement Curtin University S 2.2a Primary identification 006

7 S 2.2b 02 Elevation Photo montage 5 mm Aluminium graphic element spay finished Vivid White gloss 2 pack polyurethane paint Sign 2.2b Supertext PAVILION Refer enlargement Sign 2.2b 01 Elevation Est Sign 2.2b Supertext ENGINEERING Refer enlargement Sign 2.2b 02 Elevation North Sign 2.2b 03 East Front elevation Sign 2.2b 04 North Front elevation Curtin University S 2.2b Primary identification 007

8 NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. ENGINEERING PAVILION Colour of Face & Edges paint specification: Vivid White Vivid White gloss, 2 pack polyurethane paint, minim 2 coats. Sign 2.2b 05 Flat schematic enlargement 6mm threaded, galvanised rod tapped into letter from behind Letterform with concealed studs epoxy fixed into the wall Liberally applied silicone adhesive 5 mm Aluminium graphic element spay finished Vivid White gloss 2 pack polyurethane paint Sign 2.2b 06 Wall fixing Details Minimum, of three studs to hold weight Each element to be template fixed Curtin University S 2.2b Construction Principle 008

9 Non-illuminated sign panels to be top aligned to concrete bulkhead. Sign to wrap left hand edge. Sign to be fixed directly to concrete Refer Pg.004 for detail Signtype S7.1 Refer next page for detail S Elevation Bdg entry S Elevation Bdg entry Curtin University S 3.1 Secondary identification 009

10 Radius 90mm Clear satin anti graffiti coating to be applied to both sign panels and return edges. 800 NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. 480 S Side Elevation Aluminium panel and the return frame to be painted in 2 pack polyurethane to match Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish. This colour to be prototyped and approved prior construction. Colour to be tested under ambient light condition on site. Applied graphics from premium cast vinyl 5 to 7 year S Front Elevation Aluminium panel and the return frame to be painted in 2 pack polyurethane to match Pantone 125C (Dulux colour Balsam Pear P16F9) with pearl effect satin finish. This colour to be prototyped and approved prior construction. Colour to be tested under ambient light condition on site. Applied graphics from premium cast vinyl 5 to 7 year. Curtin University S 3.1 Secondary identification 010

11 V ground corner filled with Hi-build Primer then sanded smooth to eliminate visible step or join line. 2mm Aluminium Sign face countersunk rivetted to frame fill over, sand smooth and paint. V edge on 20 x 3mm Aluminium SHS, filled with Hi-build Primer then sanded smooth to eliminate visible step or join line. This edge detail to be applied to all exposed edges. Concealed stud fixing to the wall Curtin University S 3.1 Construction Principle 011

12 Aluminium panel and the return frame to be painted in 2 pack polyurethane to match Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish. This colour to be prototyped and approved prior construction. Colour to be tested under ambient light condition on site. Applied graphics from premium cast vinyl 5 to 7 year Clear satin anti graffiti coating to be applied to both sign panels. Radius 90mm S Front Elevation Aluminium panel and the return frame to be painted in 2 pack polyurethane to match Pantone 125C (Dulux colour Balsam Pear P16F9) with pearl effect satin finish. This colour to be prototyped and approved prior construction. Colour to be tested under ambient light condition on site. Applied graphics from premium cast vinyl 5 to 7 year. S Elevation Photo montage Curtin University S 3.2 Secondary identification 012

13 V ground corner filled with Hi-build Primer then sanded smooth to eliminate visible step or join line. 2mm Aluminium Sign face countersunk rivetted to frame fill over, sand smooth and paint. V edge on 20 x 3mm Aluminium SHS, filled with Hi-build Primer then sanded smooth to eliminate visible step or join line. This edge detail to be applied to all exposed edges. 2mm Aluminium Sign face Curtin University S 3.2 Construction Principle 013

14 50 Sign panels to be securely keyhole fixed to wall substrate 6mm spacer, paint finish satin black. Ensure space is consistently inset 50mm from sign panel edge. Refer to Pg. 007 for construction detail. 03 Top View Scale 1:10 S 4.1 Clear satin anti graffiti coating to be applied to all sign panels. 2mm Aluminium profiled sign panel with no sharp edges. Aluminium to be painted in 2 pack polyurethane to match Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish. This colour to be prototyped and approved prior to construction. Colour to be tested under ambient light conditions on site. Applied graphics from premium cast vinyl 5 to 7 year mm Aluminium fabricated sign panel with no sharp edges. Aluminium to be painted in 2 pack polyurethane to match Pantone 125C (Dulux colour Balsam Pear P16F9) with pearl effect satin finish. This colour to be prototyped and approved prior to construction. Colour to be tested under ambient light conditions on site. Applied graphics from premium cast vinyl 5 to 7 year. Radius 70mm 2mm Aluminium fabricated sign panel with no sharp edges. Graphics to be digital print applied to face and folded behind approximately 20-25mm, white text on Pantone Cool Grey 8C. Satin clear overlay NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. 01 Elevation S Elevation Part North Elevation Curtin University S 4.1 Tertiary identification 014

15 3 2 1 Note: Rear panel to be permanently adhered with construction grade adhesive, to neat finish on all edges. 3 S Wall fixing Details 2 1 Curtin University S 4.1 Construction Principle 015

16 Align left edge of sign with framing S Plan Location To be removed 1200 S Elevation Photo Montage NTS Curtin University S 4.1 Photo Montage 016

17 mm TBC Curtin University S 4.2 Secondary identification 017

18 NOTE: Text will be specific to the building. All dimensions and placement to be surveyed S Graphic Setout Left Aligned S Graphic Setout Right Aligned Curtin University S 4.2 Construction Principle 018

19 480 Artwork to be one colour digital print with clear satin overlay in Pantone Cool Grey 8C with white text. Ensure no banding visible in print. Apply vinyl to external face of glazing, ensure application is smooth and even. Ensure left edge of vinyl is aligned to edge of window frame and bottom edge is square to ground plane. 480 NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. S Detail Glazing application 1800 S Elevation Bdg Entry Curtin University S 7.1 Tertiary identification 019

20 Artwork to be one colour digital print with clear satin overlay in Pantone Cool Grey 8C with white text. Ensure no banding visible in print. Apply vinyl to external face of glazing, ensure application is smooth and even. Ensure left edge of vinyl is aligned to edge of window frame and bottom edge is square to ground plane. NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. S 7.1a 02 Detail Glazing application S Elevation Bdg Entry Curtin University S 7.1a Tertiary identification 020

21 25 Sign panels to be securely keyhole fixed to wall substrate 6mm spacer, paint finish satin black. Ensure space is consistently inset 25mm from sign panel edge. Refer to Pg. 007 for construction detail. NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. S Top View 480 2mm Aluminium fabricated sign panel with no sharp edges. Graphics to be digital print applied to face and folded behind approximately 20-25mm, white text on Pantone Cool Grey 8C. Satin clear overlay S Elevation Bdg Entry S Elevation Wall Mounted Panel Curtin University S 7.2 Tertiary identification 021

22 4mm Aluminium back panel 1 2mm Aluminium back panel mm Aluminium sign face Note: Rear panel to be permanently adhered with construction grade adhesive, to neat finish on all edges S Wall fixing Details C L C L Curtin University S 7.2 Construction Principle 022

23 25 Sign panels to be securely keyhole fixed to wall substrate 6mm spacer, paint finish satin black. Ensure space is consistently inset 25mm from sign panel edge. Refer to Pg. 007 for construction detail. NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. S Top View mm Aluminium fabricated sign panel with no sharp edges. Graphics to be digital print applied to face and folded behind approximately 20-25mm, white text on Pantone Cool Grey 8C. Satin clear overlay. 303 S Elevation Bdg Entry S 7.2a 02 Elevation Wall Mounted Panel Curtin University S 7.2a Tertiary identification 023

24 mm Aluminium back panel 1 2mm Aluminium back panel mm Aluminium sign face Note: Rear panel to be permanently adhered with construction grade adhesive, to neat finish on all edges S 7.2a 04 Wall fixing Details C L C L 1 30 C L C L Curtin University S 7.2a Construction Principle 024

25 S Elevation East Bdg Entry Full colour digital print on 4mm Alucobond panel or similar with satin clear overlay. Banners to be changeable and appear opaque. Refer to Pg. 017 for frame construction detail. Banner frame to be painted in satin black. Scale 1: S Elevation East Bdg Entry Scale 1:50 NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. Curtin University S 8.1 Vertical Rigid Banner 025

26 Full colour digital print on 4mm Alucobond panel with satin clear overlay. Banners to be changeable and appear opaque. Refer to Pg. 27 for construction detail. Banner frame to be painted in satin black NOTE: Text will be specific to the building. All dimensions and placement to be surveyed S Detail Rigid banner S Elevation Curtin University S 8.1 Vertical Rigid Banner 026

27 40 x 6mm Aluminium angle adhered to the back of sign panel with VHB D/S tape and Liberal Sikaflex. 32 x 3mm Aluminium angle to rear of panel to make rigid- Adhere as perimeter frame. Galvanised M8 fixings/holes to suit and washers. S 8.1 Curtin University S 8.1 Construction Principle 027

28 Full colour digital print on 4mm Alucobond panel with satin clear overlay. Banners to be changeable and appear opaque. Refer to Pg. 27 for construction detail. Banner frame to be painted in satin black. NOTE: Text will be specific to the building. All dimensions and placement to be surveyed. size varies S Detail Rigid banner S Elevation Curtin University S 8.2 Horizontal Rigis Banner 028

29 check current text requirements Call (1300 GO PARK) Conditions of Use To use this car park you must be a current staff or student of the University and have registered. All Visitors must use visitor s car parks. 1. Hours of operation 8:00am - 4:30pm Monday to Friday 2. Vehicles must park in designated parking bay. 3. Permit holders required to pay in this car park. 4. Infringement notices may be issued for failure to comply with these terms and conditions and the University Land and Traffic By-Laws. 5. Payment of All Day Parking for this zone only check current text requirements front side rear all 4 sides are the same T6 01 Detail Information Totem Curtin University T6 Information Totem 029

30 check current text requirements check current text requirements P 4 hr Max B4 Staff & Students front side rear all 4 sides are the same T6 01 Detail Information Totem Curtin University T6 Information Totem 030

31 3mm aluminium 5005/H34 cap to top fully welded 3mm aluminium 5005/H34 cap to top fully welded painted sections 2 pack finish, various colours as per sign manual with 2 pack clear finish over applied graphics painted sections 2 pack finish, various colours as per sign manual with 2 pack clear finish over applied graphics blue parking PMS Reflex Blue blue parking PMS Reflex Blue Blue Courtesy PMS Process Cyan C Blue Courtesy PMS Process Cyan C 90 degree fully welded seam to all four corners standard size text Univers Condensed Bold 35x35mm sleeve fixing welded to inside of totem 90 degree fully welded seam to all four corners 35x35mm sleeve fixing welded to inside of totem 10mm 316 counter sunk stainless steel machine screws 10mm 316 counter sunk stainless steel machine screws modules constructed of 3mm aluminium plate modules have a 80 grit linished aluminium surface with a 2 pack clear finish modules constructed of 3mm aluminium plate modules have a 80 grit linished aluminium surface with a 2 pack clear finish fully welded to base plate minimum 6mm fillet weld fully welded to base plate minimum 6mm fillet weld 100mm allowed in ground to conceal base plate bolts 100mm allowed in ground to conceal base plate bolts 6mm aluminium plate 300x300x500 cage bolt set in a 600x600x600 concrete block. see standard footing specifications drawing 15 6mm aluminium plate 300x300x500 cage bolt set in a 600x600x600 concrete block. see standard footing specifications drawing 15 T6 Parking Totem Detail T6 Parking Totem Detail Curtin University T6 Construction Principle 031

32 250 thickness to match building numbers. rounded edges 50 painted in 2 pack polyurethane pantone 125C with pearl effect satin finish 250 3mm aluminium 5005/H34 cap to top fully welded 9 50 painted in 2 pack polyurethane pantone process black C with pearl effect satin finish 28mm text where text too long degree fully welded seam to all four corners 35x35mm sleeve fixing welded to inside of totem 30mm text white vinyl graphics and text 10mm 316 counter sunk stainless steel machine screws modules constructed of 3mm aluminium plate modules have a 80 grit linished aluminium surface with a 2 pack clear finish 100mm allowed in ground to conceal base plate bolts fully welded to base plate minimum 6mm fillet weld 600 6mm aluminium plate 300x300x500 cage bolt set in a 600x600x600 concrete block. see standard footing specifications drawing 15 T9 01 Detail Wayfinding Totem T9 Construction Details Curtin University T9 Wayfinding Totem 032

33 printed vinyl panels Blue - Pantone reflex blue Green - Pantone 375C Orange - Pantone 021C pack black cut out vinyl text and symbols T11 01 Detail Road Side Banner front rear Curtin University T11 Road Side Banner 033

34 RHS capped in 6mm aluminium drilled tapped to suit M10 counter sunk allen key head stainless steel machine screws 1517 painted in 2 pack finish to both sides colours as per sign manual, with a 2 pack clear finish over applied graphics 1748x1500x6 aluminium sheet 100x50x3 aluminium RHS x50x3 aluminium RHS legs have a 80 grit linished surface with clear 2 pack finish 50mm stich spacings 50 30x30x3mm aluminium angle 100mm long welded inside of RHS sign 75 10mm counter sunk allen key head 316 stainless steel machine screws leg mm allowed in ground to conceal base plate, bolts and gussets leg 300x300x500 cage bolt set in a 600x600x600 concrete block 400x400x6mm 5083/H321 aluminium baseplate and gussets fully welded minimum 6mm fillet weld 6mm aluminium spacer 100x844mm welded to RHS with 50mm stitch spacings 300x300x500 cage bolt set in a 600x600x600 concrete block T11 Road Side Banner detail Assembly as per Drawing B Drawing B Curtin University T11 Construction Principle 034

35 01 Font Guideline Utilising the brand font is an integral way to create a consistent identify and create a cohesive identification system. Upper case and lower case are used to create a typographic hierarchy. Upper case is used for all headings, primary and secondary with operational information illustrated in lower case. Curtin Sansa Soft Pro abcdefghijklmnopqrstuvwxyz Curtin University Font Guideline 035