Technical Manual Index July 1, 2018
|
|
|
- Marjory Wilson
- 5 years ago
- Views:
Transcription
1 Technical Manual Index July 1, 2018 The GE90 Technical Manual Index has been reformatted as follows: Manuals and Supporting Manuals - Section 1 EM DVDs ( Manuals) Section 2 Supplementary Support Manuals Section 3 BAE Sections AR in the Next Rev Column indicates As Required. An asterisk (*) behind the indicates the manual has been revised since the last issue of the Technical Manual Index. Questions or comments concerning on-line access or purchasing of publications should be directed to Fleet Support toll free within the U.S. (877) or outside the U.S. (513) or aviation.fleet.support1@ge.com. Supplementary Manuals are available by contacting the Fleet Support aviation.fleet.support1@ge.com. aviation.fleet.support1@ge.com. The following disclosure notice is to inform you of your obligations as a recipient of technical information under U.S. Export Laws: THE INFORMATION CONTAINED IN THIS DOCUMENT IS GE PROPRIETARY INFORMATION AND IS DISCLOSED IN CONFIDENCE. IT IS THE PROPERTY OF GE AND SHALL NOT BE USED, DISCLOSED TO OTHERS OR REPRODUCED WITHOUT THE EXPRESS WRITTEN CONSENT OF GE, INCLUDING, BUT WITHOUT LIMITATION, IT IS NOT TO BE USED IN THE CREATION, MANUFACTURE, DEVELOPMENT, OR DERIVATION OF ANY REPAIRS, MODIFICATIONS, SPARE PARTS, DESIGN, OR CONFIGURATION CHANGES OR TO OBTAIN FAA OR ANY OTHER GOVERNMENT OR REGULATORY APPROVAL TO DO SO. IF CONSENT IS GIVEN FOR REPRODUCTION IN WHOLE OR IN PART, THIS NOTICE AND THE NOTICE SET FORTH ON EACH PAGE OF THIS DOCUMENT SHALL APPEAR IN ANY SUCH REPRODUCTION IN WHOLE OR IN PART. THE INFORMATION CONTAINED IN THIS DOCUMENT MAY ALSO BE CONTROLLED BY U.S. EXPORT CONTROL LAWS. UNAUTHORIZED EXPORT OR RE-EXPORT IS PROHIBITED. Page 1/1
2 GEK # GE90 Technical Manual Index July 1, 2018 Manual DVDs Next GE90-76B/-77B/-85B/-90B/-94B GE90-110B/-113B/-115B DVD Contents: Standard Practices Manual GEK 9250 R107 Ver /01/18 04/01/ GE90-76B/-77B/-85B/-90B/-94B GE90-110B/-113B/-115B DVD Contents: Manual GEK R70 Illustrated Parts Catalog GEK R69 Service Bulletins Issued after 1994 DVD Contents: Manual GEK R37 Illustrated Parts Catalog GEK R38 Service Bulletins Issued after 1994 Ver /01/17 09/01/18 Ver /01/18 11/01/18 SECTION 1 Page 1/1
3 GEK # GE90 Technical Manual Index July 1, 2018 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISEDAS REQUIRED AND ARE AVAILABLE BY CONTACTING THE AVIATION OPERATION CENTER aviation.fleetsupport@ge.com GE90-76B/-77B/-85B/-90B/-94B GE90-110B/-113B/-115B Illustrated Tool and Equipment Manual 10 04/01/17 INSTALLATION MANUALS GE90-76B/-77B/-85B/-90B/-94B Installation Manual 12 05/01/ GE90-110B/-113B/-115B Installation Manual 6 05/01/14 NONDESTRUCTIVE TESTING MANUALS GE90-76B/-77B/-85B/-90B/-94B Nondestructive Testing Manual 2 10/15/ GE90-110B/-113B/-115B Nondestructive Testing Manual 3 10/15/15 TRANSPORTATION MAUALS GE90-76B/-77B/-85B/-90B/-94B Transportation Manual 6 06/01/ GE90-110B/-113B/-115B Transportation Manual 6 03/01/12 TIME LIMITED DISPATCH SUMMARY GE90-76B/-77B/-85B/-90B/-94B Control System - Time Limited Dispatch Summary 4 Dec 2009 SECTION 2 Page 1/2
4 GEK # GE90 Technical Manual Index July 1, 2018 Supplementary Support Manuals SUPPLEMENTARY SUPPORT MANUALS ARE REVISEDAS REQUIRED AND ARE AVAILABLE BY CONTACTING THE AVIATION OPERATION CENTER aviation.fleetsupport@ge.com GE90-110B/-113B/-115B Control System - Time Limited Dispatch Summary 6 July 2012 SECTION 2 Page 2/2
5 (SECTION) GE90 BASE ALL GENERAL PRACTICES MANUAL SECTIONS GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL General Information 10 08/18/17 Safety Instructions 6 03/24/11 Equivalent Tools, Materials, and Procedures 6 09/15/11 Soldering 6 11/17/11 Soldering and Desoldering Equipment Calibration 7 04/13/17 Circuit Card Assembly Soldering 7 04/11/17 Microcircuit Soldering 7 04/11/17 Terminal Connection 6 11/17/11 Hand Soldering 7 04/12/17 SECTION 3 Page 1/7
6 GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL Manual Tinning Process 7 04/12/17 Surface Mounted Component Soldering 8 04/12/17 Ball Grid Array Component Soldering 6 11/17/11 General Repair 6 11/17/11 Identification Marking 8 12/01/16 Safety Wiring 6 11/17/11 Threaded Insert Repair 7 07/01/15 Out-of-Round Connector Repair 6 11/17/11 Potting of Connectors 6 11/17/11 Component Substitution 6 11/17/11 SECTION 3 Page 2/7
7 GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL Chemical Thread-Locking 6 11/17/11 Circuit Card Assembly Repair 6 11/17/11 Part Removal 8 04/13/17 Part Installation 7 04/12/17 Part Replacement 8 04/13/17 General Laminate, Conductor Repair 9 04/12/17 Modification of Internal Circuits 6 11/17/11 Solder Mask Repair 6 11/17/11 ESD Label Replacement 6 11/17/11 Gold Pin Replacement 6 11/17/11 SECTION 3 Page 3/7
8 GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL Terminal Strip Repair 6 11/17/11 Bonding and Encapsulating 6 11/17/11 Epoxy Bonding 7 06/27/13 Epoxy Bonding (High Temperature) 6 11/17/11 RTV Application 6 11/17/11 Protective Coatings 6 11/17/11 Removal of Conformal Coatings 6 11/17/11 Recoating Conformal Coated Repaired Areas 9 09/01/ GE90 BASE ALL Aluminum Surface Touch-up with Chromate Solution 6 11/17/ GE90 BASE ALL Painted Surface Repair 6 11/17/11 SECTION 3 Page 4/7
9 GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL Electrostatic Discharge Control 6 11/17/11 ESD Equipment Calibration 6 11/17/11 Handling ESDS Devices 6 11/17/11 Moisture Sensitive Devices 6 11/17/11 Moisture Sensitive Device Preparation 6 11/17/11 Flexible Circuit Card Assembly Repair 6 11/17/11 Connector Removal and Replacement 6 11/17/11 Magnetic Media and Software 6 11/17/11 Media Storage Precautions 6 11/17/11 Record Keeping and Configuration Control 6 11/17/11 SECTION 3 Page 5/7
10 GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL GE90 BASE ALL Electrical Wiring 6 11/17/11 Wiring and Cable Lacing 6 11/17/11 Crimped Electrical Connection 7 06/15/15 Shielded Wire Processes 6 11/17/11 Wire Preparation Processes 6 11/17/11 Chassis Repairs 6 11/17/11 Broken Screw Removal 6 11/17/11 Chassis Dent and Scratch Repair 6 11/17/11 Chassis Surface Weld Area Repair 6 11/17/11 Chassis Surfaces Repair 6 11/17/11 SECTION 3 Page 6/7
11 GE90 BASE ALL Aluminum Surface Repair by Chemical Weld Application 6 11/17/ GE90 BASE ALL Threaded Insert Overhaul 7 04/22/14 SECTION 3 Page 7/7
Gold plating, 140 Gases compressed, 393 liquid,393 Grounding, safety, 403
INDEX Acids, safety, 394 Activities, 1 Adhesives, 349 Allowances manufacturing, 77 rework,82 Aluminum Plating, 139 Analysis work distribution, 20, 29 processes, 32 Analyzing job details, 19 Assemblers
SERVICE BULLETIN. Description: VOX\ICS Tie Line Subassembly Document #: AMS44\603-0 Service Bulletin #: 002
SERVICE BULLETIN NAT Part #: AMS44 Description: VOX\ICS Tie Line Subassembly Document #: AMS44\603-0 Service Bulletin #: 002 1. Planning Information 1.1 Applicability All dual channel audio controllers:
This document outlines how to install the IP20 protection cover on a GE Universal Relay (UR) device to yield an IP20 safety rating.
GE Grid Solutions UR Family IP20 Cover Installation Instructions GE Publication Number: GEK-119546C GE Part Number: 1601-9216-A4 Copyright 2016 GE Multilin Inc. This document outlines how to install the
Product Manual MNX10050 / REV B MODELS:
VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV B MODELS: CC-AXX & JXX CC-C2X & C3X Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description... 2 Section II
Instructions for Continued
+ LORD BULLETIN NO. SM-6553 BELL 206 Instructions for Continued Airworthiness INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR LORD P/N LORD206-310-004101 AND P/N LORD206-310-004103 INSTALLED ON BELL 206A,
Product Manual MNX10050 / REV C MODELS:
VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV C MODELS: CC-AXX & JXX CC-C2X & C3X CC-V2R & V3R Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description...
Wiring Repair WIRING REPAIR
20-10-00 Wiring Repair WIRING REPAIR 1. GENERAL This section contains procedures applicable to the fabrication and repair of wire harness assemblies, cables, and wires. All wiring repairs of wire harness
SURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE Submitted for recognition as an American National Standard Issued Not Revised 1999-05-17 Superseding REV. MAY99 Draft FEB99 Working Draft Reduced Physical Layer, 250K
Horizon User s Guide
RELEASED DOCUMENT DATE: 01-25-2016 Horizon User s Guide MEMS Angular Rate Sensor Model Horizon (HZ1) Systron Donner Inertial Sales and Customer Service Phone: +1 925.979.4500 Fax: +1 925.349.1366 E-Mail:
InterferenceHunter MA2700A
User Guide InterferenceHunter MA2700A Handheld Direction Finding System User Guide Interference Hunter MA2700A Handheld Direction Finding System Includes GPS and Electronic Compass Anritsu Company 490
Line-Following Robot
1 Line-Following Robot Printed Circuit Board Assembly Jeffrey La Favre October 5, 2014 After you have learned to solder, you are ready to start the assembly of your robot. The assembly will be divided
Instruction Manual Model Upconverter
Instruction Manual Model 2006-01 Upconverter October 2013, Rev. B IF IN RF OUT Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or
A53106 SERIES DC-TO-DC CONVERTER
INSTALLATION & MAINTENANCE A53106 SERIES DC-TO-DC CONVERTER AUGUST 2011, REVISED AUGUST 2014 DOCUMENT NO. COM-00-04-20 VERSION C.1 Siemens Industry, Inc., Rail Automation 9568 Archibald Ave., Suite 100,
Getting to Know The Bible for Rework and Repair IPC 7711/7721
Welcome to the EPTAC Webinar Series: Getting to Know The Bible for Rework and Repair IPC 7711/7721 You are connected to our live presentation delivered via the internet. The webinar will begin shortly.
Throughout the course best practice will be observed as described in International Standard IPC 610.
SOLDERING COURSE 560: 3 DAYS: Max 8 Candidates This provides all the skills necessary to work on modern electronic printed circuit boards. It is intended for candidates who have an understanding of electronics
ELECRAFT Application Note
ELECRAFT Application Note Front Panel Microphone Circuit Modification Revision A, November 12, 2008 Copyright 2008, Elecraft, Inc., All Rights Reserved Background Some K3 owners have noted distorted transmit
QRS14 User s Guide. MEMS GYROSCOPE Model QRS14. Systron Donner Inertial Sales and Customer Service. Phone: Fax:
RELEASED DOCUMENT DATE: 0-25-206 QRS4 User s Guide MEMS GYROSCOPE Model QRS4 Systron Donner Inertial Sales and Customer Service Phone: + 925.979.4500 Fax: + 925.349.366 E-Mail: sales@systron.com www.systron.com
Instruction Manual Model Upconverter
Instruction Manual Model 2006-02 Upconverter October 2013, Rev. B IF IN RF OUT Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc., but may be reproduced or
2.4-GHz Radio Upgrade
CHAPTER 5 This section contains the following topics: Overview, page 5-2 Opening the Access Cover, page 5-3 Removing a Blank Spacer Card, page 5-4 Removing a 2.4-GHz Radio, page 5-5 Installing a 2.4-GHz
GETTING STARTED GUIDE NI AI, ±60 V, 24 Bit, 1 ks/s/ch Simultaneous
GETTING STARTED GUIDE NI 9228 8 AI, ±60 V, 24 Bit, 1 ks/s/ch Simultaneous This document explains how to connect to the NI 9228. Note Before you begin, complete the software and hardware installation procedures
Solidstep GEN 2 OEM INSTALL MANUAL. Rev: Page 1
Solidstep GEN 2 OEM INSTLL MNUL Rev: 03.23.2017 Page 1 TBLE OF CONTENTS System Information 2 Safety Information 2 Resources Required 3 Installation 3 Solidstep 3 Leg Extension djustment 5 System Information
Order Information. Nominal CCT
Data Sheet Tunable White Square LED Module BLX-SQ-250-250-T1-1400 Product Description Square LED module with 250mm x 250mm Tunable white capability with independent 2 channels Nominal 1400lm @ 350mA, Tc=40
OWNER S MANUAL AMERICA S PREMIER XXL SUPER RACKS XXL-2960 SUPER RACK/SMITH MACHINE XXL-2960 L 112 W 86 H 100 XXL-2960 / XXL-912 L 179 W 91 H 100
OWNER S MANUAL XXL-60 L 11 W 6 H 100 XXL-60 SUPER RACK/SMITH MACHINE XXL-60 / XXL-1 L 1 W 1 H 100 AMERICA S PREMIER XXL SUPER RACKS XXL-60 Rev0 Revision Date -1-07 COLOR CHART GRAY= SUB-ASSEMBLY PARTS
TS-950: Installing the Roofing Filter Mod
TS-950: Installing the Roofing Filter Mod The Kenwood TS-950 Roofing Filter Mod consists of a 6 pole, 4 to 5 khz wide filter followed by a high dynamic range feedback amplifier. The amplifier provides
A-dec 6300 Ceiling-Mount Dental Light INSTALLATION GUIDE
A-dec 6300 Ceiling-Mount Dental Light INSTALLATION GUIDE Recommended Tools Hex key set Plumb bob Drill 3/16" drill bit 6' piece of tubing Level Phillips head screwdriver Tape measure Anti-static strap
MIL-STD-1580B REQUIREMENT 11 DETAILED REQUIREMENTS FOR CONNECTORS
DETAILED REQUIREMENTS FOR CONNECTORS 11. General. This section describes detailed requirements for a DPA of commonly used connectors. These requirements supplement the general requirements in section 4.
APPLICATION NOTES FOR THROUGH-HOLE LEDs
APPLICATION NOTES FOR THROUGH-HOLE s Storage conditions 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. s
FAA APPROVED AIRPLANE MAINTENANCE MANUAL SUPPLEMENT. Eyebrow Window Replacement
FAA APPROVED AIRPLANE MAINTENANCE MANUAL SUPPLEMENT AIRPLANE MAKE: Boeing AIRPLANE MODEL: 737-100, -200, -200C, -300, -400, -500, -600, -700, -700C, -800, -900 TO BE ADDED TO AMM CHAPTER 56-11-XX This
Pacific Antenna RF Probe assembly
Pacific Antenna RF Probe assembly Parts In the Kit: 1 1/2 x 3 Blue PEX tube 2 5/8 O.D. vinyl caps 2 3/32 dia x 2 brass tube sections 2 Pogo spring contacts 1 4-40 x 7/16 pan head screw 1 4-40 x 1/4 pan
P/N ( )
GDC Data Converter EQUIPMENT INSTALLATION MANUAL For the GDC DATA CONVERTER P/N ---( ) ARINC TO ARINC DAC International McNeil Drive Austin, TX Copyright, DAC International. All rights reserved. -- IR.doc
2015 RIGOL TECHNOLOGIES, INC.
Service Guide DG000 Series Dual-channel Function/Arbitrary Waveform Generator Oct. 205 TECHNOLOGIES, INC. Guaranty and Declaration Copyright 203 TECHNOLOGIES, INC. All Rights Reserved. Trademark Information
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 Low Output Ripple 4 500 Vdc Output Isolation
American Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 28 Vdc 4 Wide Input Ranges (10-20Vdc, 18-36Vdc, 20-60Vdc, 36-72Vdc) 4 Excellent Line & Load Regulation 4 500 Vdc Output Isolation 4 Continuous Short
SMP LF: Surface-Mount PIN Diode for Switch and Attenuator Applications
DATA SHEET SMP32-085LF: Surface-Mount PIN Diode for Switch and Attenuator Applications Applications Low-loss, high-power switches Low-distortion attenuators (Pin 3) (Pin ) Features Low thermal resistance:
Wire Epoxy filled groove
147 Appendix D Finger construction steps In this procedure, \Upper mask" refers to a piece of copper which has been photomasked with the resist pattern for the upper electrodes and \lower mask" refers
EIA STANDARD TP-70B TEMPERATURE RISE VERSUS CURRENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS EIA/ECA B. June 2007 EIA/ECA B
EIA STANDARD ANSI/-2007 Approved: June 8, 2007 TP-70B EIA/ECA-364-70B TEMPERATURE RISE VERSUS CURRENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS EIA/ECA-364-70B (Revision of EIA-364-70A) June
Jason Stull. Physics 498 (Physics of Music) Valve Junior Modification 5/13/2010
Jason Stull Physics 498 (Physics of Music) Valve Junior Modification 5/13/2010 1 Introduction My original idea for a class project was to build a tube guitar amplifier. I have wanted a tube amp for some
DETAIL PRODUCT SPECIFICATION CONTROL DRAWING Initial Release
Revision DCO Description Revision Record Engineering Approval QA Approval Release - Initial Release EJ 7/19/07 TM 7/24/07 7/24/07 A Correction Table III, add Table IV. 1/7/08 B Change mfgr, para 3.3.3.
BICONICAL ANTENNA MODEL BIA MHz 200 MHz
INSTRUCTION MANUAL BICONICAL ANTENNA MODEL BIA-30 20 MHz 200 MHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN. 1996 ELECTRO-METRICS
34134A AC/DC DMM Current Probe. User s Guide. Publication number April 2009
User s Guide Publication number 34134-90001 April 2009 For Safety information, Warranties, Regulatory information, and publishing information, see the pages at the back of this book. Copyright Agilent
2-Slot Desktop Chassis (DC) Extended Temperature
APRIL 2008 LMC5202A 2-Slot Desktop Chassis (DC) Extended Temperature Copyright 2008. Black Box Corporation. All rights reserved 50 80105BB 01 A0 1000 Park Drive Lawrence, PA 35055 1018 724 746 5500 Fax
Ballooned by InspectionXpert. User: Brittany Belsito ; Expires: :33
1 2 3 4 REV SHEET 1 SPINDLE FITTING ASSEMBLY-LOCK LINK ATTACH, SIDE STRUT, MAIN THE PARTS LIST IN THIS REPORT SUPERSEDES THE DRAWING SHEET PARTS LIST FOR THIS PART OWNER LAND GEAR, C. REITZ, (425)294-6952
Block and Ball Inspection Checklist
Block and Ball Inspection Checklist 01/16 P/N 67688 Rev. 1 Page 2 of 8 Block and Ball Inspection Checklist The purpose for the inspection check list is to provide a quick reference for checking the integrity
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
823 McTavish Road NE Calgary, Alberta, Canada T2E 7G9 PH: (800) 564-6469 www.eaglecopters.com INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FOR P139-HD DIGITAL AUDIO SYSTEM MDL GA212 FOR EUROCOPTER BK117 (EC145)
Tesla K20 GPGPU Card Installation Guide
Dell PowerEdge C80X Tesla K0 GPGPU Card Installation Guide Regulatory Model: B06B Regulatory Type: B06B00 Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make
Part Number Order Number Package Marking Supplying Form PD5750T7D-E4A PD5750T7D-E4A-A 6-pin WLBGA (T7D) (Pb-Free)
SiGe BiCMOS Integrated Circuit Wide Band LNA IC with Through Function DESCRIPTION Data Sheet The PD5750T7D is a low noise wideband amplifier IC mainly designed for the portable digital TV application.
TS-850: Installing the Inrad Roofing Filter Mod
TS-850: Installing the Inrad Roofing Filter Mod The TS-850 Roofing Filter Mod consists of a 6 pole, 4 to 5 khz wide filter followed by a high dynamic range feedback amplifier. The amplifier provides enough
3. SIGNIFICANCE AND USE 3.1 These test methods provide a quantitative measure of the tack property of a pressure sensitive adhesive.
Call Letters PSTC-16 Date of Issuance 10/00 Revised 10/03 Revised 05/07 Loop Tack 1. SCOPE 1.1 This test method is intended to determine the tack properties of a pressure sensitive adhesive. This test
SCXI Terminal Block
CALIBRATION PROCEDURE SCXI -1322 Terminal Block What Is Calibration? Why Calibrate? This document contains information and step-by-step instructions for verifying the temperature sensor performance of
ADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
ORPHEUS THREE U S E R M A N U A L
ORPHEUS THREE U S E R M A N U A L I N T R O D U C T I O N CONTENTS Introduction... 2 Front panel description... 3 Rear panel description - Mono... 4 Connections - Mono... 6 Operations... 8 UNPACKING First
Junction Box JB6101- (000) Installation and Operation. Manual DV Issue 1 June 2012
Junction Box JB6101- (000) Installation and Operation Manual DV 64494.03 Issue 1 June 2012 Becker Flugfunkwerk GmbH Baden Airpark 77836 Rheinmünster Germany Telephone +49 (0) 7229 / 305-0 Fax +49 (0) 7229
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/23H 10 July 2017 SUPERSEDING MIL-DTL-55302/23H 3 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, DECADE INCREMENT 10 THRU
EQUIPMENT INSTALLATION MANUAL. for the GDC62 RADIO ALTIMETER INTERFACE UNIT P/N
EQUIPMENT INSTALLATION MANUAL for the GDC62 RADIO ALTIMETER INTERFACE UNIT P/N 1102-4000-01 DAC International 6702 McNeil Drive Austin, TX 78729 Copyright 2013, DAC International. All rights reserved.
Fabrication Documentation
Rev. ECO Description Author Approved Date A Initial Release B. Klatt W. Mayer 04/24/91 B General Review 02/17/06 C General Editorial Update B. Klatt M. Bautz 07/16/14 Massachusetts Institute of Technology
Model 3104C. Biconical Antenna. User Manual
Model 3104C Biconical Antenna User Manual ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained
Instructions for Preparing OPTICAL GROUND WIRE IN AN ISOLATOR
Instructions for Preparing OPTICAL GROUND WIRE IN AN ISOLATOR NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS ARE THE PROPERTY OF AFL, ARE ISSUED IN STRICT CONFIDENCE
SMP1307 Series: Very Low Distortion Attenuator Plastic Packaged PIN Diodes
DATA SHEET SMP1307 Series: Very Low Distortion Attenuator Plastic Packaged PIN Diodes Applications Very low distortion Pi and TEE attenuators Cable TV AGC High-volume wireless systems Features Low distortion
Model 1792 VHF Radio. User s Manual. Rev. B FAA APPROVED NOT FAA APPROVED. ECP Dec 30
Model 1792 VHF Radio FAA APPROVED ECP202 2014 Dec 30 NOT FAA APPROVED User s Manual Rev. B All Weather Inc. 1165 National Drive Sacramento, CA 95834 USA 800.824.5873 www.allweatherinc.com Copyright 2011,
AXIS P32 VE/-LVE Series. Repainting Instructions
Repainting Instructions Impact on warranty Impact on warranty This product is approved for repaint by Axis, provided that you follow the instructions in this document and at www.axis.com/warranty-implication-when-repainting
SolidStep 3.0 OEM INSTALLATION MANUAL
SolidStep 3.0 OEM INSTLLTION MNUL TBLE OF CONTENTS Information 2 Safety 2 Preparation 2 Resources Required 2 Prior to Installation 3 Installation 3 Place ssembly Inside Doorframe 3 djust Transport Lock
Operating Manual Multi-Spot M22AL CD Stud Welding Machine
Operating Manual Multi-Spot M22AL CD Stud Welding Machine EL900016 January 2014 by Vehicle Service Group. All rights reserved. CO8904 Rev - 1/31/14 OPERATION MANUAL Read this manual carefully before using
Mid-West. Instrument. Model 140 Electrical Installation and Operating Instructions. Gauge Front ELECTRICAL
Mid-West Instrument BULLETIN NO. ELEC-IM140/11A Replaces ELEC-IM140-141/09A ELECTRICAL Gauges with switches have one or two SPST or SPDT hermetically sealed adjustable set point reed switch assemblies.
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
Model Biconical Antenna. User Manual
Model 3109 Biconical Antenna User Manual ETS-Lindgren L.P. reserves the right to make changes to any product described herein in order to improve function, design, or for any other reason. Nothing contained
MPR kHz Reader
MPR-5005 Page 1 Doc# 041326 MPR-5005 125kHz Reader Installation & Operation Manual - 041326 MPR-5005 Page 2 Doc# 041326 COPYRIGHT ACKNOWLEDGEMENTS The contents of this document are the property of Applied
LOG PERIODIC ANTENNA MODEL LPA MHz - 1 GHz
INSTRUCTION MANUAL LOG PERIODIC ANTENNA 200 MHz - 1 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN. 1993 ELECTRO-METRICS
CLA LF: Surface Mount Limiter Diode
DATA SHEET CLA4610-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 73 C/W Typical threshold
P331-2 set ESD generator (IEC )
User manual Probe set set ESD generator (IEC 61000-4-2) Copyright January 2017 LANGER GmbH 2017.01.09 User manual Table of contents: Page 1 ESD generator (IEC 61000-4-2) 3 1.1 Design and function of the
Power Meter. Measurement Guide. for Anritsu RF and Microwave Handheld Instruments BTS Master Site Master Spectrum Master Cell Master
Measurement Guide Power Meter for Anritsu RF and Microwave Handheld Instruments BTS Master Site Master Spectrum Master Cell Master Power Meter Option 29 High Accuracy Power Meter Option 19 Inline Peak
Handling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
SKY : GHz SP3T/SPDT Wire-Bondable GaAs Die
DATA SHEET SKY13434-002: 0.1 6.0 GHz SP3T/SPDT Wire-Bondable GaAs Die Applications 802.11 a/b/g/n/ac WLAN networks Embedded modules Features SP3T (2.5 GHz) and SPDT (5.0 GHz) switches with Bluetooth capability
Mounting Approaches for RF Products Using the Package Type
Application Note: APPNOTE-012 Rev. A APPLICATION NOTE Mounting Approaches for RF Products Using the 780019 Package Type Introduction The objective of this application note is to provide users of Cree RF
TSSP-1 (Stainless Steel Thermistor Probe) Manual Rev A
TSSP-1 (Stainless Steel Thermistor Probe) Manual 57-6028 Rev A This page intentionally left blank. 2 2014 Dyacon, Inc Contents NOTICES...4 Copyright 2014 Dyacon, Inc...4 Manufacturer...4 Declarations...5
COMPONENT LOCATION INDEX
COMPONENT LOCATION INDEX 2004 ACCESSORIES & EQUIPMENT Audio System - TSX Fig. 1: Locating Audio System Components (1 Of 2) Tuesday, March 11, 2008 3:35:47 3:35:51 PM Page 1 Fig. 2: Locating Audio System
Solar Cell Handling Instructions ECS3x0. October 26, 2009 HANDLING INSTRUCTIONS V1.0
Solar Cell Handling Instructions ECS3x0 October 26, 2009 ECS3x0 User Manual V1.0 Page 1/7 REVISION HISTORY The following major modifications and improvements have been made to the first version of this
Wiring the 1176LN Clone
Back to Main 1176 Page 15 October 2004 modified 9 January 2005 revised 31 January 2006 Wiring the 1176LN Clone Keeping the Hum to a Minimum There's a feeling of satisfaction you get when you finish stuffing
CLA Series: Silicon Limiter Diodes Packaged and Bondable Chips
data sheet CLA Series: Silicon Limiter Diodes Packaged and Bondable Chips Applications l Limiters Features l Established Skyworks limiter diode process l High-power, mid-range and cleanup designs l Low
SMP LF: Surface Mount PIN Diode for High Power Switch Applications
DATA SHEET SMP1304-085LF: Surface Mount PIN Diode for High Power Switch Applications Applications Low loss, high power switches Low distortion attenuators Features Low-thermal resistance: 35 C/W Suitable
AK9700AE IR LED for NDIR Gas Sensing
AK9700AE IR LED for NDIR Gas Sensing 1. General Description The AK9700AE is a small mid-infrared light emitting diode made of AlInSb and optimized for NDIR gas sensing applications. It uses AKM s unique
SPD1101/SPD1102/SPD : Sampling Phase Detectors
DATA SHEET SPD1101/SPD1102/SPD1103-111: Sampling Phase Detectors NOTE: These products have been discontinued. The Last Time Buy opportunity expires on 12 April 2010. Applications Phase-Locked Loops Phase-locked
Risk Assessment & Safe Working Practice
RA Ref Number: 46 Revision: 3 Project/Job Number Reference Insert Job Number Approval Date: 30/03/2018 RA Description: Electrical Termination Pyro Next Review Date: 01/04/2019 Notes: Please refer to Safe
DESCRIPTION, INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
DESCRIPTION, INSTALLATION, OPERATION, AND MAINTENANCE MANUAL ME-183 NAV INTERFACE 453-0012 Document No.: 570-0001 Rev. - Cobham Avionics Artex Products Artex Aircraft Supplies, Inc. doing business as Cobham
TS-870: Installing the Inrad Roofing Filter Mod
TS-870: Installing the Inrad Roofing Filter Mod The TS-870 roofing filter mod consists of a 6 pole, 4 to 5 khz wide filter followed by a high dynamic range feedback amplifier. The amplifier provides enough
Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)
![Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)](/thumbs/74/70133560.jpg "Instruction Sheet Tool Kit [ ] (for SL Series 110 Jack Connectors)")
Instruction Sheet Tool Kit 1725150 [ ] (for SL Series 110 Jack Connectors) 26 FEB 04 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
G7 Adjustable Speed Drive PG Feedback Option Manual
G7 Adjustable Speed Drive PG Feedback Option Manual Document Number: ICC-10389-000 Date: October 2001 About This Manual This manual was written by the TOSHIBA Technical Publications Group. This group is
DETAIL PRODUCT SPECIFICATION CONTROL DRAWING Initial Release
Revision DCO Description - Initial Release A 6391 Renamed QT625NC to QPDS-0125, Table 1 update frequency range Table 3 update current and tr/tf, Update 6.4.4 for microcircuit usage Revision Record Engineering
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
ScreenLogic Wireless Connection Kit. Installation Guide. pool/spa control system
pool/spa control system ScreenLogic Wireless Connection Kit Installation Guide P/N 520663 - Rev A 8 Technical Support Contact Technical Support at: Sanford, North Carolina (8 A.M. to 5 P.M.) Phone: (800)
PARABOLIC ANTENNA MODEL MTA GHz 10.0 GHz
INSTRUCTION MANUAL PARABOLIC ANTENNA MODEL MTA-60 1.0 GHz 10.0 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN. 1993
AirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
TS-930: Installing the Inrad Roofing Filter Mod
TS-930: Installing the Inrad Roofing Filter Mod The TS-930 roofing filter mod consists of a 6 pole, 4 to 5 khz wide filter followed by a high dynamic range, feedback amplifier. The amplifier provides enough
SPECIAL NOTICE. All references to NAT product part numbers (and associated images) are equivalent to AEM product part numbers.
SPECIAL NOTICE This product is now licensed to Anodyne Electronics Manufacturing (AEM) from Northern Airborne Technology (NAT). AEM is responsible for all matters related to this product, including sales,
3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX
3 Shielded Compact Ribbon (SCR) Wiremount Plug, 36110-3000XX, and Shell Kit, 36310-F200-XXX Instructions June 2007 78-9100-4282-5 General This instruction manual explains the method of assembling the 3M
PH201G (Style B) Distributor
User s Manual PH201G (Style B) Distributor R 6th Edition Blank Page INTRODUCTION This instruction manual describes the procedures for installing, wiring and carrying out simple maintenance
SKY LF: GHz Two-Way, 0 Degrees Power Divider
DATA SHEET SKY16406-381LF: 2.2-2.8 GHz Two-Way, 0 Degrees Power Divider Applications TD-LTE systems Satellite communications 2.4 GHz ISM band Features Low insertion loss: 0.3 db @ 2.5 GHz High isolation:
Application Bulletin 240
Application Bulletin 240 Design Consideration CUSTOM CAPABILITIES Standard PC board fabrication flexibility allows for various component orientations, mounting features, and interconnect schemes. The starting
Log Periodic Antenna
Page 1 of 10 Log Periodic Antenna ALFM 80120 88 MHz to 108 MHz (Extendible to 80 to 120 MHz) Page 2 of 10 Table of Contents 1.0 Introduction... 3 2.0 Product Specifications... 4 3.0 Important Safety Precautions...
750 MHz, 34 db gain push-pull amplifier
Rev. 04 30 March 2005 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module in a SOT115J package operating at a supply voltage of 24 V (DC). The module